Interfacial Charge Transport in 1D TiO2 Based Photoelectrodes for Photoelectrochemical Water Splitting

Recent Developments in Nickel-Based Layered Double Hydroxides for Photo(-/)electrocatalytic Water Oxidation

Layered double hydroxides (LDHs), especially those containing nickel (Ni), are increasingly recognized for their potential in photo(-/)electrocatalytic water oxidation due to the abundant availability of Ni, their corrosion resistance, and their minimal toxicity. This review provides a comprehensive examination of Ni-based LDHs in electrocatalytic (EC), photocatalytic (PC), and photoelectrocatalytic (PEC) water oxidation processes. The review delves into the operational principles, highlighting similarities and distinctions as well as the benefits and limitations associated with each method of water oxidation. It includes a detailed discussion on the synthesis of monolayer, ultrathin, and bulk Ni-based LDHs, focusing on the merits and drawbacks inherent to each synthesis approach. Regarding the EC oxygen evolution reaction (OER), strategies to improve catalytic performance and insights into the structural evolution of Ni-based LDHs during the electrocatalytic process are summarized. Furthermore, the review extensively covers the advancements in Ni-based LDHs for PEC OER, including an analysis of semiconductors paired with Ni-based LDHs to form photoanodes, with a focus on their enhanced activity, stability, and underlying mechanisms facilitated by LDHs. The review concludes by addressing the challenges and prospects in the development of innovative Ni-based LDH catalysts for practical applications. The comprehensive insights provided in this paper will not only stimulate further research but also engage the scientific community, thus driving the field of photo(-/)electrocatalytic water oxidation forward.

Amplifying Photochromic Response in Tungsten Oxide Films with Titanium Oxide and Polyvinylpyrrolidone

Tungsten oxide (WO3) is known for its photochromic properties, making it useful for smart windows, displays, and sensors. However, its small bandgap leads to rapid recombination of electron-hole pairs, resulting in poor photochromic performance. This study aims to enhance the photochromic properties of WO3 by synthesizing hexagonal tungsten oxide via hydrothermal synthesis, which increases surface area and internal hydrates. Titanium oxide (TiO2) was adsorbed onto the tungsten oxide to inject additional charges and reduce electron-hole recombination. Additionally, polyvinylpyrrolidone (PVP) was used to improve dispersion in organic solvents, allowing for the fabrication of high-quality films using the doctor blade method. Characterization confirmed the enhanced surface area, crystal structure, and dispersion stability. Reflectance and transmittance measurements demonstrated significant improvements in photochromic properties due to the composite structure. These findings suggest that the introduction of TiO2 and PVP to tungsten oxide effectively enhances its photochromic performance, broadening its applicability in various advanced photochromic applications.

Thermal-Stabilized Protonated TiO2 for Heat-Accelerated Photoelectrochemical Water Splitting

Enhancing the charge separation efficiency is a big challenge that limits the energy conversion efficiency of photoelectrochemical (PEC) water splitting. Surface states generated by protonation of TiO2 are the efficient charge separation passageways to massively accept or transfer the photogenerated electrons. However, a challenge is to avoid the deprotonation of a protonated TiO2 photoelectrode at the operation temperature. Here, we found that the terminal hydroxyl group (OHT) as surface states on the TiO2 surface generated via electrochemical protonation of TiO2 at 90 °C [90-TiO2-x-(OH)x] is thermally stable. As a result, the thermally enhanced photocurrent of the 90-TiO2-x-(OH)x electrode reached 1.05 mA cm-2 under 80 °C, and the stability was maintained up to 10 h with a slight photocurrent decrease of 3%. The thermally stable surface states as charge separation paths provide an effective method to couple the heat field with the PEC process via thermal-stimulating hopping of polarons.

Optimization of Photoelectrochemical Response on TiO2 Nanotube Arrays Treated by H3PO4 and Mechanism Analysis of the Slowing Down Effect during Preparation

The process control of anodization has been a hot topic for a long time. In this study, the addition of phosphoric acid to the traditional electrolyte changed the ion distribution on the reaction interface and the composition of the anion contamination layer so as to achieve the slowing down effect on anodization, the mechanism and theoretical model of which are also given in this paper. TiO2 is a common material in photoelectrocatalysis, but there are few studies on the photoelectrochemical performance of TiO2 nanotube arrays. The stability and rapidity of the photoelectrochemical response of TiO2 nanotube arrays prepared in phosphoric acid containing an electrolyte were effectively optimized in this study.

Hollow Nanoreactors for Controlled Photocatalytic Behaviors: Fundamental Theory, Structure-Performance Relationship, and Catalytic Advantages

Hollow nanoreactors (HoNRs) have regarded as an attractive catalytic material for photocatalysis due to their exceptional capabilities in enhancing light harvesting, facilitating charge separation and transfer, and optimizing surface reactions. Developing novel HoNRs offers new options to realize controllable catalytic behavior. However, the catalytic mechanism of photocatalysis occurring in HoNRs has not yet been fully revealed. Against this backdrop, this review elaborates on three aspects: 1) the fundamental theoretical insights of HoNRs-driven photocatalytic kinetics; 2) structure-performance relationship of HoNRs to photocatalysis; 3) catalytic advantages of HoNRs in photocatalytic applications. Specifically, the review focuses on the fundamental theories of HoNRs for photocatalysis and their structural advantages for strengthening light scattering, promoting charge separation and transfer, and facilitating surface reaction kinetics, and the relationship between key structural parameters of HoNRs and their photocatalytic performance is in-depth discussed. Also, future prospects and challenges are proposed. It is anticipated that this review paper will pave the way for forthcoming investigations in the realm of HoNRs for photocatalysis.

A 3D hierarchical TiO2/CaIn2S4/C3N4arrays photoanode with dual-heterojunction for enhanced photoelectrochemical performance

A novel 3D hierarchical TiO2/CaIn2S4/C3N4arrays with dual heterojunctions photoanode is constructed by stepwise deposition of CaIn2S4nanosheets and ultrathin C3N4onto the well-aligned TiO2nanorods arrays. Integrating the merit of the superior ability of CaIn2S4and C3N4to harvest visible light, dual type-Ⅱ heterojunction band structure and one-dimensional ordered nanostructures, the TiO2/CaIn2S4/C3N4photoanode exhibits simultaneous significant improvements in visible-light harvesting, charge separation and electron transfer capability. At 1.23 V (versus reversible hydrogen electrode) under AM 1.5 G irradiation, the TiO2/CaIn2S475/C3N4photoanode exhibits a photocurrent density of 4.5 mA cm-2, which is 5.2 and 51.1-fold higher than that of TiO2/CaIn2S475 and pristine TiO2photoanode, respectively. Moreover, the applied bias photo-to-current efficiency (ABPE) of the TiO2/CaIn2S475/C3N4photoanode reaches 3.5% at 0.36 V (versus reversible hydrogen electrode). These results are helpful for fabricating more efficient heterostructure photoelectrodes.

Recent Advances toward Enhanced Photocatalytic Proprieties of BiFeO3-Based Materials

Owing to their remarkable success in photocatalytic applications, multiferroic BiFeO3 and its derivatives have gained a highly promising position as electrode materials for future developments of efficient catalysts. In addition to their appropriate band gaps, these materials exhibit inherent intrinsic polarizations enabling efficient charge carrier separation and their high mobility without the need for additional co-catalysts. Here, we review the existing strategies for enhancing the photocatalytic performances of BiFeO3-based materials and we describe the physico-chemical properties at the origin of their exceptional photocatalytic behavior. A special focus is paid to the degradation of organic pollutants and water splitting, both driven through photocatalysis to unveil the correlation between BiFeO3 size, substitution, and doping on the one hand and the photocatalytic performances on the other hand. Finally, we provide practical recommendations for future developments of high-performing BiFeO3-based electrodes.

Construction of [NbO]6-x -xS Structure to Change Charge Density and Regulate Spontaneous Polarization to Achieve Efficient Pyro-Photo-Electric Water Splitting System of NaNbO3

Pyroelectric materials in the field of photoelectrochemical (PEC) water splitting still face the problems of difficult low spontaneous polarization intensity and excessive carrier recombination. Based on the above problems, we altered the interaction between S-Nb-S in the [NbO]6-x -xS structure, and the constructed [NbO]6-x -xS structure achieved the regulation of charge density change and spontaneous polarization. The results show that under the stimulation of light and temperature fluctuations, the current density of the NS-4 photoanode is as high as 0.574 mA/cm2 at 1.23 VRHE , which is about 1.59 times higher than the pure NaNbO3 current density value, and the NS -4 photoanode achieves IPCE value of 16.08 %. The first-principles density-functional theory calculations (DFT) reveal the principle of the [NbO]6-x -xS structure for the suppression function of the carrier recombination and the improvement function of the pyroelectric effect. The analysis shows that the S-doping leads to the weakening of S-Nb-S interactions in the [NbO]6-x -xS structure, which improves the pyroelectric effect and suppresses the photo/pyro-generated carrier recombination, and effectively enhances the performance of the pyro-photo-electric synergistic water splitting system. This work promotes the development of pyroelectric materials in the field of photoelectrochemical water splitting.

Flame doping of indium ions into TiO2 nanorod arrays for enhanced photochemical water oxidation

Indium (In) ions were diffused into a TiO2 (In-TiO2) photoelectrode via a facile and efficient flame doping method resulting in improved photo-induced carrier separation. The dopant concentration was systematically investigated, and a volcano-type relationship between the dopant concentration and photoelectrochemical (PEC) performance was observed. The optimum incident photon-to-current efficiency and photocurrent density of In-TiO2 were 38.6% and 0.70 mA cm-2 at 1.23 V, respectively, 2.1 and 11.2 times the values of pristine TiO2, respectively. In doping resulted in improved charge separation and lower surface adsorption energies for reactant molecules, as evidenced by experimental and computational methods.

Surface Engineering of Cu2O Photocathodes via Facile Graphene Oxide Decoration for Improved Photoelectrochemical Water Splitting

Copper oxide (Cu2O) has attracted significant interest as an efficient photocathode for photoelectrochemical (PEC) water splitting owing to its abundance, suitable band gap, and band-edge potential. Nevertheless, a high charge recombination rate restricts its practical photoconversion efficiency and reduces the PEC water-splitting performance. To address this challenge, we present the facile electrodeposition of graphene oxide (GO) on the Cu2O photocathode surface. To determine the effect of varying GO weight percentages on PEC performance, varying amounts of GO were deposited on the Cu2O photocathode surface. The optimally deposited GO-Cu2O photocathode exhibited a photocurrent density of -0.39 to -1.20 mA/cm2, which was three times that of a photocathode composed of pristine Cu2O. The surface decoration of Cu2O with GO reduced charge recombination and improved the PEC water-splitting performance. These composites can be utilized in strategies designed to address the challenges associated with low-efficiency Cu2O photocathodes. The physicochemical properties of the prepared samples were comprehensively characterized by field-emission scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, Raman spectroscopy, UV-visible spectroscopy, and X-ray photoelectron spectroscopy. We believe that this research will pave the way for developing efficient Cu2O-based photocathodes for PEC water splitting.

Driving a NiTiO3 photocatalyst for the oxygen evolution reaction with near-infrared light

A nickel titanate (NTO) photocatalyst has been developed for the oxygen evolution reaction (OER) with an exceptionally broad light wavelength excitation ranging from visible to infrared. Specifically, by loading CoOx as the co-catalyst, the apparent quantum yields for the OER were ca. 2.2%, 1.0%, and 0.8% at wavelengths of 470, 760, and 850 nm, respectively. The achievements reveal that the NTO photocatalyst is highly efficient even under illumination with near-infrared (NIR) light, which confers the potential for highly efficient solar-driven oxidation reactions.

Design of NiS@Ni3S2/CdS heterostructure with intimate contact interface for sensitive photoelectrochemical detection of lincomycin

Owing to their internal electric field effect and abundant photo-induced carriers, photoactive heterostructured materials are considered a feasible approach to improve the sensitivity of a photoelectrochemical (PEC) sensor. Herein, a novel NiS@Ni₃S₂/CdS heterostructure composite is derived from Ni-loaded zeolitic imidazolate framework (Ni-ZIF). The PEC experiments showed the NiS@Ni₃S₂/CdS composite exhibits superior photocurrent response than NiS@Ni₃S₂ and CdS. This is attributed to the fact that the type II heterojunction of NiS@Ni₃S₂/CdS with a tightly connected interface reduces the transport distance of carriers and facilitates electron-hole separation. Next, using the NiS@Ni₃S₂/CdS modified electrode, an aptamer/glutaraldehyde/chitosan/NiS@Ni₃S₂/CdS/ITO PEC biosensor is developed, which exhibits excellent sensitivity for lincomycin (Lin) detection with a wide linear range (0.0001 ∼ 1.25 nM) and a low detection limit of 0.067 pM. The prepared sensor is further employed to monitor Lin in the actual milk. The results confirm that the prepared sensing electrode displays good selectivity, repeatability and stability.

Tandem cells for unbiased photoelectrochemical water splitting

Hydrogen is an essential energy carrier which will address the challenges posed by the energy crisis and climate change. Photoelectrochemical water splitting (PEC) is an important method for producing solar-powered hydrogen. The PEC tandem configuration harnesses sunlight as the exclusive energy source to drive both the hydrogen (HER) and oxygen evolution reactions (OER), simultaneously. Therefore, PEC tandem cells have been developed and gained tremendous interest in recent decades. This review describes the current status of the development of tandem cells for unbiased photoelectrochemical water splitting. The basic principles and prerequisites for constructing PEC tandem cells are introduced first. We then review various single photoelectrodes for use in water reduction or oxidation, and highlight the current state-of-the-art discoveries. Second, a close look into recent developments of PEC tandem cells in water splitting is provided. Finally, a perspective on the key challenges and prospects for the development of tandem cells for unbiased PEC water splitting are given.

Thermal Effect on Photoelectrochemical Water Splitting Toward Highly Solar to Hydrogen Efficiency

Photoelectrochemical (PEC) hydrogen production is an emerging technology that uses renewable solar light aimed to establish a sustainable carbon-neutral society. The barriers to commercialization are low efficiency and high cost. To date, researchers have focused on materials and systems. However, recent studies have been conducted to utilize thermal effects in PEC hydrogen production. This Review provides a fresh perspective to utilize the thermal effects for PEC performance enhancement while delineating the underlying principles and equations associated with efficiency. The fundamentals of the thermal effect on the PEC system are summarized from various perspectives: kinetics, thermodynamics, and empirical equations. Based on this, materials are classified as plasmonic metals, quantum dot-based semiconductors, and photothermal organic materials, which have an inherent response to photothermal irradiation. Finally, the economic viability and challenges of these strategies for PEC are explained, which can pave the way for the future progress in the field.

Two-Dimensional Sb Modified TiO2 Nanorod Arrays as Photoanodes for Efficient Solar Water Splitting

As one of the widely studied semiconductor materials, titanium dioxide (TiO₂) exhibits high photoelectrochemical (PEC) water-splitting performance as well as high chemical and photo stability. However, limited by a wide band gap and fast electron-hole recombination rate, the low solar-to-hydrogen conversion efficiency remains a bottleneck for the practical application of TiO₂-based photoelectrodes. To improve the charge separation and water oxidation efficiency of TiO₂ photoanodes, antimonene, a two-dimensional (2D) material obtained by liquid-phase exfoliation, was assembled onto TiO₂ nanorod arrays (TNRAs) by a simple drop-coating assembly process. PEC measurements showed that the resulting 2D Sb/TiO₂ photoelectrode displayed an enhanced photocurrent density of about 1.32 mA cm^-2 in 1.0 M KOH at 0.3 V vs. Hg/HgO, which is ~1.65 times higher than that of the pristine TNRAs. Through UV-Vis absorption and electrochemical impedance spectroscopy measurements, it was possible to ascribe the enhanced PEC performances of the 2D Sb/TiO₂ photoanode to increased absorption intensity in the visible light region, and improved interfacial charge-transfer kinetics in the 2D Sb/TiO₂ heterojunction, which promotes electron-hole separation, transfer, and collection.

Aerosol-assisted synthesis of titania-based spherical and fibrous materials with a rational design of mesopores using PS-b-PEO

Surfactant-assisted synthesis is a promising technique for the tailor-made design of highly porous metal oxide based nanomaterials. There has been a demand for the comprehensive design of their morphology, porous structure and crystallinity to extend potential applications using metal oxide based materials such as titania (TiO₂). However, the porous structure is often deformed and/or destroyed during the process of crystallizing metal oxide frameworks. Herein, the aerosol-assisted synthesis of mesoporous TiO₂ powders was conducted in the presence of high-molecular-weight poly(styrene)-block-poly(ethylene oxide) (PS-b-PEO), which improved the stability of the derivative mesoporous structure with an increase in the thickness of the TiO₂ frameworks. To propose a rational synthetic route for stable and porous metal oxides, the resultant mesoporous structure and the textural morphology of the mesoporous TiO₂ powders were surveyed using PS-b-PEO with different lengths of PS and PEO chains. By a judicious choice of the molecular structure of PS-b-PEO, the morphological design of the fully crystallized anatase phase of TiO₂ from spherical to fibrous ones was achieved with control over the mesopore diameter.

Hematite decorated with nanodot-like cobalt (oxy)hydroxides for boosted photoelectrochemical water oxidation

Photoelectrochemical (PEC) water splitting has been considered as an alternative process to produce green hydrogen. However, the energy conversion efficiency of PEC systems was still limited by the inefficient photoanode. Cocatalysts decoration is regarded as an efficient strategy for improving PEC performance of photoanode. In this work, nanodot-like cobalt (oxy)hydroxides was rationally decorated on hematite to fabricate CoOOH/Fe2O3 photoanode. The resulted CoOOH/Fe2O3 exhibits a high photocurrent density of 1.92 mA cm-2 at 1.23 V vs. RHE, which is 2.6 times than that of bare Fe2O3. In addition, the onset potential displays a cathodic shift of ca. 110 mV, indicating that CoOOH can efficiently accelerate water oxidation kinetics over Fe2O3. The comprehensive PEC and electrochemical characterizations reveal that CoOOH could not only provide abundant accessible Co active sites for water oxidation, but also could passivate the surface states of Fe2O3, thus increase the carrier density and decrease the interfacial resistance. As a result, the PEC water oxidation performance over Fe2O3 was significantly boosted. This work supports that the roles of CoOOH cocatalyst is generic and such CoOOH could be used for other semiconductor-based photoanodes for outstanding PEC water splitting performance.

Inactivation and Degradation of Influenza a Virus on the Surface of Photoactive Self-Cleaning Cotton Fabric Functionalized with Nanocrystalline TiO2

Chemical modification of cotton-rich fabrics with TiO2 nanoparticles results in photoactive self-cleaning textiles, which can provide, under UV or solar radiation, complete oxidation of low-molecular compounds, degradation of supramolecular structures, and inactivation of microorganisms due to the photocatalytic effect. In this paper, we describe, based on the example of influenza A (H1N1) virus, a photoinduced antiviral effect of cotton fabric functionalized with nanocrystalline TiO2. Fast inactivation of influenza virus occurs on the irradiated surface of photoactive fabric due to adsorption and photocatalytic degradation. The TiO2 component in the prepared fabric increases the adsorption effect compared to initial cotton due to a high specific area of TiO2 nanocrystallites. Long-term irradiation leads to destruction of all virion structures to the point of RNA molecules. In contrast to pristine cotton, no virus RNA is detected using the polymerase chain reaction (PCR) technique after long-term irradiation of photoactive fabric. The results of this study underline the potential of photoactive self-cleaning fabrics for application in air purification systems and personal protective clothes to provide permanent protection of people against harmful chemical and biological pollutants.

Photoelectrochemical Water Oxidation over Novel Semiconducting Zinc-Based Metal-Thiolate Framework

Designing an efficient catalyst for a sustainable photoelectrochemical water oxidation reaction is very challenging in the context of renewable energy research. Here, we have introduced a new semiconducting porous zinc-thiolate framework via successful stitching of an "N" donor linker with a triazine-based tristhiolate secondary building unit in the overall architecture. The introduction of both linker and tristhiolate ligand synergistically modifies the architecture by making it a rigid, crystalline, three-dimensional, thermally stable, and porous framework. Our novel zinc-thiolate framework is used as an n-type semiconductor as revealed from the solid-state UV-vis DRS spectroscopic analysis, ac and dc conductivity analysis, and Mott-Schottky plot. This n-type semiconductor-based zinc-thiolate framework is utilized in the photoelectrochemical water oxidation reaction. It displayed a very high efficiency for a visible-light-driven oxygen evolution reaction (OER) in a KOH medium using standard Ag/AgCl as the reference electrode. The superiority of this material was further revealed from the low onset potential (0.822 mV vs RHE), high photocurrent density (0.204 mA cm^-2), good stability, and high O₂ evolution rate (77 μmol g^-1 of oxygen evolution within 2 h), and a good efficiency (ABPE 0.42%, IPCE 29.6% and APCE 34.5%). Furthermore, the porosity in the overall framework seems to be a blessing to the photoelectrochemical performance due to better mass diffusion of the electrolyte. A detailed mechanism for the OER reaction was analyzed through density functional theory analysis suggesting the potential future of this Zn-thiolate framework for achieving a high efficiency in the sustainable water oxidation reaction.

Recent Advances in TiO2-based Photoanodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting has attracted a great attention in the past several decades which holds great promise to address global energy and environmental issues by converting solar energy into hydrogen. However, its low solar-to-hydrogen (STH) conversion efficiency remains a bottleneck for practical application. Developing efficient photoelectrocatalysts with high stability and high STH conversion efficiency is one of the key challenges. As a typical n-type semiconductor, titanium dioxide (TiO 2 ) exhibits high PEC water splitting performance, especially high chemical and photo stability. But, TiO 2 has also disadvantages such as wide band gap and fast electron-hole recombination rate, which seriously hinder its PEC performance. This review focuses on recent development in TiO 2 -based photoanodes as well as some key fundamentals. The corresponding mechanisms and key factors for high STH, and controllable synthesis and modification strategies are highlighted in this review. We conclude finally with an outlook providing a critical perspective on future trends on TiO 2 -based photoanodes for PEC water splitting.

On the Morphology of Nanostructured TiO2 for Energy Applications: The Shape of the Ubiquitous Nanomaterial

Nanostructured titania is one of the most commonly encountered constituents of nanotechnology devices for use in energy-related applications, due to its intrinsic functional properties as a semiconductor and to other favorable characteristics such as ease of production, low toxicity and chemical stability, among others. Notwithstanding this diffusion, the quest for improved understanding of the physical and chemical mechanisms governing the material properties and thus its performance in devices is still active, as testified by the large number of dedicated papers that continue to be published. In this framework, we consider and analyze here the effects of the material morphology and structure in determining the energy transport phenomena as cross-cutting properties in some of the most important nanophase titania applications in the energy field, namely photovoltaic conversion, hydrogen generation by photoelectrochemical water splitting and thermal management by nanofluids. For these applications, charge transport, light transport (or propagation) and thermal transport are limiting factors for the attainable performances, whose dependence on the material structural properties is reviewed here on its own. This work aims to fill the gap existing among the many studies dealing with the separate applications in the hope of stimulating novel cross-fertilization approaches in this research field.

Application of Nanostructured TiO2 in UV Photodetectors: A Review

As a wide-bandgap semiconductor material, titanium dioxide (TiO₂ ), which possesses three crystal polymorphs (i.e., rutile, anatase, and brookite), has gained tremendous attention as a cutting-edge material for application in the environment and energy fields. Based on the strong attractiveness from its advantages such as high stability, excellent photoelectric properties, and low-cost fabrication, the construction of high-performance photodetectors (PDs) based on TiO₂ nanostructures is being extensively developed. An elaborate microtopography and device configuration is the most widely used strategy to achieve efficient TiO₂ -based PDs with high photoelectric performances; however, a deep understanding of all the key parameters that influence the behavior of photon-generated carriers, is also highly required to achieve improved photoelectric performances, as well as their ultimate functional applications. Herein, an in-depth illustration of the electrical and optical properties of TiO₂ nanostructures in addition to the advances in the technological issues such as preparation, microdefects, p-type doping, bandgap engineering, heterojunctions, and functional applications are presented. Finally, a future outlook for TiO₂ -based PDs, particularly that of further functional applications is provided. This work will systematically illustrate the fundamentals of TiO₂ and shed light on the preparation of more efficient TiO₂ nanostructures and heterojunctions for future photoelectric applications.

Photoelectrochemical oxygen evolution with interdigitated array electrodes: the example of TiO2

The catalytic reactions of photoelectrochemical water splitting attracts tremendous attention as a promising strategy for clean energy production. And the research on reaction mechanism is particularly important in design and developing new catalysts. In this work, the special electrochemical tool of interdigitated array (IDA) electrodes was utilized in investigating the photoelectrochemical oxygen evolution reaction process and detecting the reaction productin situwith the generation-collection mode. TiO₂was taken as a model catalyst and was decorated onto the IDA generator electrode through an electrophoresis method, so that the photoelectrochemical water splitting can take place on the IDA generator and the reaction product can be detected directly with the IDA collector in real time. It is found that TiO₂can be successfully decorated onto the surface of IDA electrode with the expected photoelectrochemical activity, and the generation-collection mode reveals and distinguishes the production of O₂from the overall photoelectrochemical current on TiO₂generator. The mass transfer process of O₂from the TiO₂generator to the collector could be observed as well. Large overall current at high potential range indicates the possible increasing production of the byproducts or nonfaradaic current.

TiO2 Containing Hybrid Composite Polymer Membranes for Vanadium Redox Flow Batteries

In recent years, vanadium redox flow batteries (VRFB) have captured immense attraction in electrochemical energy storage systems due to their long cycle life, flexibility, high-energy efficiency, time, and reliability. In VRFB, polymer membranes play a significant role in transporting protons for current transmission and act as barriers between positive and negative electrodes/electrolytes. Commercial polymer membranes (such as Nafion) are the widely used IEM in VRFBs due to their outstanding chemical stability and proton conductivity. However, the membrane cost and increased vanadium ions permeability limit its commercial application. Therefore, various modified perfluorinated and non-perfluorinated membranes have been developed. This comprehensive review primarily focuses on recent developments of hybrid polymer composite membranes with inorganic TiO₂ nanofillers for VRFB applications. Hence, various fabrications are performed in the membrane with TiO₂ to alter their physicochemical properties for attaining perfect IEM. Additionally, embedding the -SO₃H groups by sulfonation on the nanofiller surface enhances membrane proton conductivity and mechanical strength. Incorporating TiO₂ and modified TiO₂ (sTiO₂, and organic silica modified TiO₂) into Nafion and other non-perfluorinated membranes (sPEEK and sPI) has effectively influenced the polymer membrane properties for better VRFB performances. This review provides an overall spotlight on the impact of TiO₂-based nanofillers in polymer matrix for VRFB applications.

Hierarchically Designed Three-Dimensional Composite Structure on a Cellulose-Based Solar Steam Generator

The emerging water purification technology represented by solar water evaporation has developed rapidly in recent years and is widely used in seawater desalination. However, the high reflectivity of sunlight and low efficiency of photothermal conversion greatly hinder its application prospects. In this paper, the hierarchical structure of the film was designed and optimized by the addition of carbon materials in the process of bacterial cellulose culture. A cellulose-based composite film material with a microporous structure was obtained, which can improve the photothermal evaporation rate and photothermal conversion efficiency from the structural principle to improve the stability of floating on the water. Bacterial cellulose (BC) as a three-dimensional carrier was combined with one-dimensional and two-dimensional (1D/2D) compounds of carbon nanotubes (CNT) and reduced graphene oxide (RGO) to form composite films for solar evaporation. By the addition of CNT-RGO (21.8 wt %), the composite showed prominent photothermal evaporation rate and photothermal conversion efficiency properties. Through in situ culture of BC, not only a tight structure can be obtained but also the surface of BC contains a large number of hydroxyl groups, which have many active sites to load photothermal materials. BC nanofibers, CNT, and RGO cooperate to form a porous network structure, which provides continuous double channels for the rapid transmission of water molecules and light paths, so as to form an excellent photothermal layer. The photothermal conversion efficiency is 90.2%, and the photothermal evaporation rate is 1.85 kg m^-2 h^-1 to achieve efficient solar interface evaporation. This is a high level of photothermal properties in a cellulose-based solar steam generator. The superior photothermal performance of this hybrid film possesses scalability and desalination ability.

A visible-IR responsive BiVO4/TiO2 photoanode with multi-effect point defects for photothermal enhancement of photoelectrochemical water splitting

A N and Ni co-doped BiVO₄/TiO₂ nanotube array photoanode with rich oxygen vacancies is fabricated via the sequential hydrothermal-calcination method. Strong visible-infrared light absorption, good charge separation and transfer and improved water oxidation kinetics are realized through double point defects, leading to the optimal photothermal effect-enhanced photocurrent density of up to 3.15 mA cm^-2 without a co-catalyst.

Crystal Facet Engineering of TiO2 Nanostructures for Enhancing Photoelectrochemical Water Splitting with BiVO4 Nanodots

Although bismuth vanadate (BiVO₄) has been promising as photoanode material for photoelectrochemical water splitting, its charge recombination issue by short charge diffusion length has led to various studies about heterostructure photoanodes. As a hole blocking layer of BiVO₄, titanium dioxide (TiO₂) has been considered unsuitable because of its relatively positive valence band edge and low electrical conductivity. Herein, a crystal facet engineering of TiO₂ nanostructures is proposed to control band structures for the hole blocking layer of BiVO₄ nanodots. We design two types of TiO₂ nanostructures, which are nanorods (NRs) and nanoflowers (NFs) with different (001) and (110) crystal facets, respectively, and fabricate BiVO₄/TiO₂ heterostructure photoanodes. The BiVO₄/TiO₂ NFs showed 4.8 times higher photocurrent density than the BiVO₄/TiO₂ NRs. Transient decay time analysis and time-resolved photoluminescence reveal the enhancement is attributed to the reduced charge recombination, which is originated from the formation of type II band alignment between BiVO₄ nanodots and TiO₂ NFs. This work provides not only new insights into the interplay between crystal facets and band structures but also important steps for the design of highly efficient photoelectrodes.

Surface plasmon-driven photoelectrochemical water splitting of a Ag/TiO2 nanoplate photoanode

A silver/titanium dioxide nanoplate (Ag/TiO₂ NP) photoelectrode was designed and fabricated from vertically aligned TiO₂ nanoplates (NP) decorated with silver nanoparticles (NPs) through a simple hydrothermal synthesis and electrodeposition route. The electrodeposition times of Ag NPs on the TiO₂ NP were crucial for surface plasmon-driven photoelectrochemical (PEC) water splitting performance. The Ag/TiO₂ NP at the optimal deposition time of 5 min with a Ag element content of 0.53 wt% demonstrated a remarkably high photocurrent density of 0.35 mA cm⁻² at 1.23 V vs. RHE under AM 1.5G illumination, which was 5 fold higher than that of the pristine TiO₂ NP. It was clear that the enhanced light absorption properties and PEC performance for Ag/TiO₂ NP could be effectively adjusted by simply controlling the loading amounts of metallic Ag NPs (average size of 10–30 nm) at different electrodeposition times. The superior PEC performance of the Ag/TiO₂ NP photoanode was attributed to the synergistic effects of the plasmonic Ag NPs and the TiO₂ nanoplate. Interestingly, the plasmonic effect of Ag NPs not only increased the visible-light response (λ_max = 570 nm) of TiO₂ but also provided hot electrons to promote photocurrent generation and suppress charge recombination. Importantly, this study offers a potentially efficient strategy for the design and fabrication of a new type of TiO₂ hybrid nanostructure with a plasmonic enhancement for PEC water splitting.

A hybrid nanostructure Ag/TiO₂ photoelectrode for PEC water splitting with a remarkable high photocurrent density, 0.35 mA cm⁻² (5 fold higher than that of the pristine TiO₂ photoeletrode) was fabricated by a facile one-pot hydrothermal and electrodeposition method.

Sustainable photoanode for water oxidation reactions: from metal-based to metal-free materials

Sunlight affords an inexhaustible and primary energy for Earth. A photoelectrochemical system can efficiently harvest solar energy and convert it into chemicals. However, sophisticated processes and expensive raw materials are...

Exploring the modulation mechanism of the LSPR effect of Cu periodic nanosphere arrays to promote the performance of TiO2 photoelectrodes

Cu periodic nanosphere arrays can greatly promote the photoelectrochemical performance of TiO2 photoelectrodes by localized surface plasmon resonance effects, multiple scattering and coupling effects.

Nanostructured Photothermal Materials for Environmental and Catalytic Applications

Solar energy is a green and sustainable clean energy source. Its rational use can alleviate the energy crisis and environmental pollution. Directly converting solar energy into heat energy is the most efficient method among all solar conversion strategies. Recently, various environmental and energy applications based on nanostructured photothermal materials stimulated the re-examination of the interfacial solar energy conversion process. The design of photothermal nanomaterials is demonstrated to be critical to promote the solar-to-heat energy conversion and the following physical and chemical processes. This review introduces the latest photothermal nanomaterials and their nanostructure modulation strategies for environmental (seawater evaporation) and catalytic (C1 conversion) applications. We present the research progress of photothermal seawater evaporation based on two-dimensional and three-dimensional porous materials. Then, we describe the progress of photothermal catalysis based on layered double hydroxide derived nanostructures, hydroxylated indium oxide nanostructures, and metal plasmonic nanostructures. Finally, we present our insights concerning the future development of this field.

Boosting Unassisted Alkaline Solar Water Splitting Using Silicon Photocathode with TiO2 Nanorods Decorated by Edge-Rich MoS2 Nanoplates

To construct a highly efficient photoelectrochemical tandem device with silicon photocathode operating in alkaline conditions, it is desirable to develop stable and active catalysts which enable the photocathode to reliably perform under an alkaline environment. With nanostructured passivation layer and edge-exposed transition metal disulfides, silicon photocathode provides new opportunities for achieving unbiased alkaline solar water splitting. Here, the TiO₂ nanorod arrays decorated by edge-rich MoS₂ nanoplates are elaborately synthesized and deposited on p-Si. The vertically aligned TiO₂ nanorods fully stabilize the Si surface and improve anti-reflectance. Moreover, MoS₂ nanoplates with exposed edge sites provide catalytically active regions resulting in the kinetically favored hydrogen evolution under an alkaline environment. Interfacial energy band bending between p-Si and catalyst layers facilitates the transport of photogenerated electrons under steady-state illumination. Consequently, the MoS₂ nanoplates/TiO₂ nanorods/p-Si photocathode exhibits significantly improved photoelectrochemical-hydrogen evolution reaction (PEC-HER) performance in alkaline media with a high photocurrent density of 10 mA cm^-2 at 0 V versus RHE and high stability. By integrating rationally designed photocathode with earth-abundant Fe₆₀ (NiCo)₃₀ Cr₁₀ anode and perovskite/Si tandem photovoltaic cell, an unassisted alkaline solar water splitting is accomplished with a current density of 5.4 mA cm^-2 corresponding to 6.6% solar-to-hydrogen efficiency, which is the highest among p-Si photocathodes.

Non-noble metal plasmonic enhanced photoelectrochemical sensing of chlorpyrifos based on 1D TiO2-x/3D nitrogen-doped graphene hydrogel heterostructure

Low-cost and resource-rich non-noble metal plasmonic materials have attracted tremendous attention as potential substitutes for plasmonic noble metals. Herein, 3D nitrogen-doped graphene hydrogels (NGH) decorated with Ti³⁺ self-doped 1D rod-shaped titanium dioxide nanorods (TiO_2-x NR), 10-25 nm in size, were prepared by a facile one-step method. It was found that the as-fabricated TiO_2-x NR/NGH showed a synergistic effect, displaying enhanced photoelectrochemical (PEC) activity by controlling the nanoscale architecture and improving the electronic properties, while also producing abundant oxygen vacancies, which extended the light harvesting and suppressed the recombination of electron-hole pairs induced by the non-noble metal surface plasmon resonance (SPR) effect. In particular, the transient-state photocurrent intensity of the TiO_2-x NR/NGH composites was 5.1 times as high as that of pure TiO₂. Therefore, the TiO_2-x NR/NGH composites could serve as a substrate material for PEC sensing, providing a good basis for selective and sensitive detection of chlorpyrifos. Under optimal conditions, the constructed PEC sensor was found to have several advantages including a broad linear range (0.05 ng/mL-0.5 μg/mL), low detection limit (0.017 ng/mL), and considerable stability, demonstrating that the sensor may offer a promising route in the field of environmental analysis.

Green Synthesis and Applications of ZnO and TiO2 Nanostructures

Over the last two decades, oxide nanostructures have been continuously evaluated and used in many technological applications. The advancement of the controlled synthesis approach to design desired morphology is a fundamental key to the discipline of material science and nanotechnology. These nanostructures can be prepared via different physical and chemical methods; however, a green and ecofriendly synthesis approach is a promising way to produce these nanostructures with desired properties with less risk of hazardous chemicals. In this regard, ZnO and TiO2 nanostructures are prominent candidates for various applications. Moreover, they are more efficient, non-toxic, and cost-effective. This review mainly focuses on the recent state-of-the-art advancements in the green synthesis approach for ZnO and TiO2 nanostructures and their applications. The first section summarizes the green synthesis approach to synthesize ZnO and TiO2 nanostructures via different routes such as solvothermal, hydrothermal, co-precipitation, and sol-gel using biological systems that are based on the principles of green chemistry. The second section demonstrates the application of ZnO and TiO2 nanostructures. The review also discusses the problems and future perspectives of green synthesis methods and the related issues posed and overlooked by the scientific community on the green approach to nanostructure oxides.

Synergistic Effects of Surface Passivation and Charge Separation to Improve Photo-electrochemical Performance of BiOI Nanoflakes by Au Nanoparticle Decoration

We demonstrate that the photoactivity of bismuth oxyiodide (BiOI) nanoflake (NF) photocathodes in photo-electrochemical (PEC) water splitting can be significantly enhanced by about 24-fold by thermal calcination under an air atmosphere and then surficial decoration of Au nanoparticles (NPs). To understand the key factors affecting the PEC efficiency in Au NP-decorated BiOI NF photoelectrodes, incident photon-to-current conversion efficiency, electrochemical impedance spectroscopy, photovoltage, and electrochemically active surface area measurements were performed. The analytic results presented that thermal calcining could produce mesopores, increasing active sites on the surface of BiOI NFs. In addition, the synergistic effects of surface-state passivation and charge separation were observed for the surficial Au NP decoration on BiOI NFs. Transient absorption spectroscopy coupled with PEC measurements confirmed that the lifetime of photogenerated electrons on the conduction band of BiOI NFs can be prolonged by Au NP decoration, resulting in higher probability to carry out water reduction. The current investigation presents important insights into the mechanism of charge carrier dynamics in metal-semiconductor nano-heterostructures, which is contributive to develop photoelectrode materials in solar fuel production.

A nano-surface monocrystalline BiVO4 nanoplate photoanode for enhanced photoelectrochemical performance

A nano-surface monocrystalline BiVO₄ photoanode with a large surface area is prepared by a low-cost and simple etching process.

Femtosecond Laser Induced Phase Transformation of TiO2 with Exposed Reactive Facets for Improved Photoelectrochemistry Performance

Titanium dioxide (TiO₂) is one of the most promising candidates for photoelectrochemistry applications. For a high photoelectrochemistry performance, the control of crystal structure and crystal facet is essential. The phase transformation of TiO₂ is conventionally achieved by thermal annealing. Here, we report an approach for selective phase transformation of TiO₂ containing exposed reactive facets with improved photoelectrochemistry performance. After femtosecond laser processing, TiO₂ nanotubes with exposed reactive anatase {010} facets are prepared, and they have a maximum photocurrent density more than 5 times that of pure anatase. Additionally, this strategy can induce phase transformation in a selective area, which shows the advantages of patterning processing. Our method constructs a promising strategy for preparing functional nanomaterials with high performances and functionality.

Multi-Leg TiO2 Nanotube Photoelectrodes Modified by Platinized Cyanographene with Enhanced Photoelectrochemical Performance

Highly ordered multi-leg TiO2 nanotubes (MLTNTs) functionalized with platinized cyanographene are proposed as a hybrid photoelectrode for enhanced photoelectrochemical water splitting. The platinized cyanographene and cyanographene/MLTNTs composite yielded photocurrent densities 1.66 and 1.25 times higher than those of the pristine MLTNTs nanotubes, respectively. Open circuit VOC decay (VOCD), electrochemical impedance spectroscopy (EIS), and intensity-modulated photocurrent spectroscopy (IMPS) analyses were performed to study the recombination rate, charge transfer characteristics, and transfer time of photogenerated electrons, respectively. According to the VOCD and IMPS results, the addition of (platinized) cynographene decreased the recombination rate and the transfer time of photogenerated electrons by one order of magnitude. Furthermore, EIS results showed that the (platinized) cyanographene MLTNTs composite has the lowest charge transfer resistance and therefore the highest photoelectrochemical performance.