A Fluorescence-Phosphorescence-Phosphorescence Triple-Channel Emission Strategy for Full-Color Luminescence

Organic Phosphorescent Hopper-Shaped Microstructures

Hopper-shaped microcrystals, an unusual type of crystal with a large specific surface area, are promising for use in catalysis, drug delivery, and gas sensors. In contrast to well-studied inorganic hopper-shaped crystals, organic phosphorescent concave hopper-shaped microstructures are rarely reported. This study reports the synthesis of two types of organic stepped indented hopper-shaped microstructures with efficient room temperature phosphorescence (RTP) using a liquid phase self-assembly strategy. The formation mechanism is attributed to the interfacial instability induced by the concentration gradient and selective etching. Compared with flat microstructures, the stepped indented hopper-like RTP microstructures exhibit high sensitivity to oxygen. This work also demonstrates that packing the photochromic material into the concave hopper "vessel" effectively controls the switch of phosphorescence from energy transfer, expanding the potential applications of phosphorescent materials.

ε-Polylysine organic ultra-long room-temperature phosphorescent materials based on phosphorescent molecule doping

Achieving long-lived room-temperature phosphorescence from pure organic amorphous polymers is attractive, and afterglow materials with colour-tunable and multiple-stimuli-responsive afterglow are particularly important, but only few materials with these characteristics have been reported so far. Herein, a facile and general method is reported to construct a series of ε-polylysine (ε-PL)-based afterglow materials with tunable colour (from blue to red) and long life. By doping guest molecules into ε-PL to obtain composite materials, the polymer matrix provides a rigid environment for luminescent groups, resulting in amorphous polymers with different RTPs. In this system, the materials even have impressive humidity-stimulated responses, and the phosphorescence emission exhibits excitation-dependent and time-dependent properties. The humidity-responsive afterglow is caused by the destruction of hydrogen bonds and quenching of triplet excitons. The time-dependent afterglow should stem from the formation of diversified RTP emissive species with comparable but different lifetimes. 9,10-diaminophene has Ex-De properties in the film doping state. With the change of excitation wavelength (254 nm to 365 nm), the emission wavelength shifts from 461 nm to 530 nm, accompanied by the change of emission colour from blue to green. In addition, the phosphorescence life of the film is the longest, up to 2504.7 ms, and the afterglow lasts up to 15 s, which is conducive to its applications in anti-counterfeiting and information encryption.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Effect of luminescent materials on the biochemistry, ultrastructure, and rhizobial microbiota of Spirodela polyrhiza

Fluorescent materials and technologies have become widely used in scientific research, and due to the ability to convert light wavelengths, their application to photosynthetic organisms can affect their development by altering light quality. However, the impacts of fluorescent materials on aquatic plants and their environmental risks remain unclear. To assess the effects of luminescent materials on floating aquatic macrophytes and their rhizosphere microorganisms, 4-(di-p-tolylamino)benzaldehyde-A (DTB-A) and 4-(di-p-tolylamino)benzaldehyde-M (DTB-M) (emitting blue-green and orange-red light, respectively) were added individually and jointly to Spirodela polyrhiza cultures and set at different concentrations (1, 10, and 100 μM). Both DTB-A and DTB-M exhibited phytotoxicity, which increased with concentration under separate treatment. Moreover, the combined group exhibited obvious stress relief at 10 μM compared to the individually treated group. Fluorescence imaging showed that DTB-A and DTB-M were able to enter the cell matrix and organelles of plant leaves and roots. Peroxidation induced cellular damage, contributing to a decrease in superoxide dismutase (SOD) and peroxidase (POD) activities and malondialdehyde (MDA) accumulation. Decomposition of organelle structures, starch accumulation in chloroplasts, and plasmolysis were observed under the ultrastructure, disrupting photosynthetic pigment content and photosynthesis. DTB-A and DTB-M exposure resulted in growth inhibition, dry weight loss, and leaf yellowing in S. polyrhiza. A total of 3519 Operational Taxonomic Units (OTUs) were identified in the rhizosphere microbiome. The microbial communities were dominated by Alphaproteobacteria, Oxyphotobacteria, and Gammaproteobacteria, with the abundance and diversity varied significantly among treatment groups according to Shannon, Simpson, and Chao1 indices. This study revealed the stress defense response of S. polyrhiza to DTB-A and DTB-M exposures, which provides a broader perspective for the bioremediation of pollutants using aquatic plants and supports the further development of fluorescent materials for applications.

Hyperbranched Polyborosiloxanes: Non-traditional Luminescent Polymers with Red Delayed Fluorescence

Non-traditional fluorescent polymers have attracted significant attention for their excellent biocompatibility and diverse applications. However, designing and preparing non-traditional fluorescent polymers that simultaneously possess long emission wavelengths and long fluorescence lifetime remains challenging. In this study, a series of novel hyperbranched polyborosiloxanes (P1-P4) were synthesized. As the electron density increases on the monomer diol, the optimal emission wavelengths of the P1-P4 polymers gradually red-shift to 510, 570, 575, and 640 nm, respectively. In particular, P4 not only exhibits red emission but also demonstrates delayed fluorescence with a lifetime of 9.73 μs and the lowest critical cluster concentration (1.76 mg/mL). The experimental results and theoretical calculations revealed that the synergistic effect of dual heteroatom-induced electron delocalization and through-space O⋅⋅⋅O and O⋅⋅⋅N interaction was the key factor contributing to the red-light emission with delayed fluorescence. Additionally, these polymers showed excellent potential in dual-information encryption. This study provides a universal design strategy for the development of unconventional fluorescent polymers with both delayed fluorescence and long-wavelength emission.

A functional unit combination strategy for enhancing red room-temperature phosphorescence

Red room-temperature phosphorescence (RTP) materials based on non-metallic organic compounds are less reported compared to the commonly found green RTP materials. Here, we propose a novel approach to obtain red RTP materials by integrating and combining two functional units, resembling a jigsaw puzzle. In this approach, benzo[c][2,1,3]thiadiazole (BZT) serves as the red RTP unit, while a folding unit containing sulphur/oxygen is responsible for enhancing spin-orbit coupling (SOC) to accelerate the intersystem crossing (ISC) process. Three new molecules (SS-BZT, SO-BZT, and OO-BZT) were designed and synthesized, among which SS-BZT and SO-BZT with folded geometries demonstrate enhanced red RTP in their monodisperse films compared to the parent BZT. Meanwhile, the SS-BZT film shows a dual emission consisting of blue fluorescence and red RTP, with a significant spectral separation of approximately 150 nm, which makes the SS-BZT film highly suitable for applications in optical oxygen sensing and ratiometric detection. Within the oxygen concentration range of 0-1.31%, the SS-BZT film demonstrates a quenching constant of 2.66 kPa-1 and a quenching efficiency of 94.24%, indicating that this probe has the potential to accurately detect oxygen in a hypoxic environment.

Achieving White-Light Emission Using Organic Persistent Room Temperature Phosphorescence

Artificial lighting currently consumes approximately one-fifth of global electricity production. Organic emitters with white persistent RTP have potential for applications in energy-efficient lighting technologies, due to their ability to harvest both singlet and triplet excitons. Compared to heavy metal phosphorescent materials, they have significant advantages in cost, processability, and reduced toxicity. Phosphorescence efficiency can be improved by introducing heteroatoms, heavy atoms, or by incorporating luminophores within a rigid matrix. White-light emission can be achieved by tuning the ratio of fluorescence to phosphorescence intensity or by pure phosphorescence with a broad emission spectrum. This review summarizes recent advances in the design of purely organic RTP materials with white-light emission, describing single-component and host-guest systems. White phosphorescent carbon dots and representative applications of white-light RTP materials are also introduced.

Photoexcitation-Induced Assembly: A Bottom-Up Physical Strategy for Driving Molecular Motion and Phase Evolution

ConspectusIn the field of molecular assembly, photodriven self-assembly is a smart and crucial strategy to regulate the molecular orderliness, multiscale structure, and optoelectronic properties. Traditionally, photodriven self-assembly is based on photochemical processes, through molecular structural change induced by photoreactions. Despite great progress in the photochemical self-assembly, there still exists disadvantages (e.g., the photoconversion rate never reaches 100% with the possible side reactions). Therefore, the photoinduced nanostructure and morphology are often difficult to predict due to insufficient phase transition or defects. In contrast, the physical processes based on photoexcitation are straightforward and can fully utilize photons to avoid the drawbacks of photochemistry. The photoexcitation strategy excludes the change of molecular structure, only utilizing the molecular conformational change from the ground state to excited state. Then, the excited state conformation is employed to drive molecular movement and aggregation, further promoting the synergistic assembly or phase transition of the entire material system. The regulation and exploration of molecular assembly upon photoexcitation can open up a new paradigm to deal with the "bottom-up" behavior and develop unprecedented optoelectronic functional materials.This Account starts with a brief introduction to the problems faced by photocontrolled self-assembly and presents the photoexcitation-induced assembly (PEIA) strategy. Then, we focus on exploring PEIA strategy based on persulfurated arenes as the prototype. The molecular conformational transition of persulfurated arenes from the ground state to the excited state is conducive to the formation of intermolecular interactions, successively driving molecular motion, aggregation, and assembly. Next, we describe our progress in exploring PEIA of persulfurated arenes at the molecular level and then demonstrate that the PEIA of persulfurated arenes can synergistically drive molecular motion and phase transition in various block copolymer systems. Moreover, we provide the potential applications of PEIA in dynamic visual imaging, information encryption, and surface property regulation. Finally, an outlook on further development of PEIA is prospected.

Making multi-twisted luminophores produce persistent room-temperature phosphorescence

Multi-twisted molecules, especially those with more than four branched rotation axes, have served as superior prototypes in diverse fields like molecular machines, optical materials, sensors, and so forth. However, due to excessive non-radiative relaxation of these molecules, it remains challenging to address their persistent room-temperature phosphorescence (pRTP), which limits their further development. Herein, we develop a host-guest energy-transfer relay strategy to improve the phosphorescence lifetime of multi-twisted luminophores by over thousand-fold to realize pRTP, which can be witnessed by the naked eye after removing the excitation light source. Moreover, we employ photoexcitation-induced molecular rearrangement to further prolong the phosphorescence lifetime, which, to the best of our knowledge, is the first example of photoactivation in ordered host-guest systems. Our systems show superior humidity and oxygen resistance, enabling long-term (at least over 9-12 months) stability of the pRTP properties. By achieving pRTP of multi-twisted luminophores, this work can advance the understanding of molecular photophysical mechanisms and guide the study of more molecular systems that are difficult to achieve pRTP.

A Class of Organic Units Featuring Matrix-Controlled Color-Tunable Ultralong Organic Room Temperature Phosphorescence

A novel class of organic units (N-1 and N-2) and their derivatives (PNNA-1 and PNNA-2) with excellent property of ultralong organic room temperature phosphorescence (UORTP) is reported. In this work, N-1, N-2, and their derivatives function as the guests, while organic powders (PNCz, BBP, DBT) and polymethyl methacrylate (PMMA) serve as the host matrixes. Amazingly, the color of phosphorescence can be tuned in different states or by varying the host matrixes. At 77 K, all molecules show green afterglow in the monomer state but yellow afterglow in the aggregated state because strong intermolecular interactions exist in the self-aggregate and induce a redshift of the afterglow. In particular, PNNA-1 and PNNA-2 demonstrate distinctive photoactivated green UORTP in the PMMA film owing to the generation of their cation radicals. Whereas the PNNA-1@PNCz and PNNA-2@PNCz doping powders give out yellow UORTP, showing matrix-controlled color-tunable UORTP. In PNCz, the cation radicals of PNNA-1 and PNNA-2 can stay stably and form strong intermolecular interactions with PNCz, leading to a redshift of ultralong phosphorescence.

Electronic Materials: An Antiaromatic Propeller Made from the Four-Fold Fusion of Tetraoxa[8]circulene and Perylene Diimides

The synthesis of an antiaromatic tetraoxa[8]circulene annulated with four perylene diimides (PDI), giving a dynamic non-planar π-conjugated system, is described. The molecule contains 32 aromatic rings surrounding one formally antiaromatic planarized cyclooctatetraene (COT). The intense absorption (ϵ=3.35×10⁵  M^-1  cm^-1 in CH₂ Cl₂ ) and emission bands are assigned to internal charge-transfer transitions in the combined PDI-circulene π-system. The spectroscopic data is supported by density functional theory calculations, and nuclear independent chemical shift calculation indicate that the antiaromatic COT has increased aromaticity in the reduced state. Electrochemical studies show that the compound can reversibly reach the tetra- and octa-anionic states by reduction of the four PDI units, and the deca-anionic state by reduction of the central COT ring. The material functions effectively in bulk hetero junction solar cells as a non-fullerene acceptor, reaching a power conversion efficiency of 6.4 %.

Aliphatic Polyesters with White-Light Clusteroluminescence

Single-molecule white-light emission (SMWLE) has many advantages in practical applications; however, the fabrication of SMWLE from nonconjugated luminescent polymers, namely, clusteroluminogens (CLgens), is still a big challenge. Herein, the first example of linear nonconjugated polyesters with SMWLE is reported. Twenty-four kinds of nonconjugated aliphatic polyesters with tunable clusteroluminescence (CL) colors and efficiency were synthesized by the copolymerization of six epoxides and four anhydrides. Experimental and calculation results prove that, at the primary structure level, the balance of structural flexibility and rigidity via adjusting the side-chain length significantly enhances the efficiency of CL without wavelength change. However, altering the chemical structures of the monomer from succinic anhydride to trans-maleic anhydride (MA), cis-MA, and citraconic anhydride (CA), secondary structures of these polyesters change from helix to straight and folding sheet accompanied by gradually red-shifted CL from 460 to 570 nm due to the increase in through-space n-π* interactions, as demonstrated by the computational and experimental results. Then, pure SMWLE with CIE coordination (0.30, 0.32) based on overlapped short-wavelength and long-wavelength CL is achieved in CA-based polyesters. This work not only provides further insights into the emission mechanism of CL but also provides a new strategy to manipulate the properties of CL by regulating the hierarchical structures of CLgens.

Secondary through-space interactions facilitated single-molecule white-light emission from clusteroluminogens

Clusteroluminogens refer to some non-conjugated molecules that show visible light and unique electronic properties with through-space interactions due to the formation of aggregates. Although mature and systematic theories of molecular photophysics have been developed to study conventional conjugated chromophores, it is still challenging to endow clusteroluminogens with designed photophysical properties by manipulating through-space interactions. Herein, three clusteroluminogens with non-conjugated donor-acceptor structures and different halide substituents are designed and synthesized. These compounds show multiple emissions and even single-molecule white-light emission in the crystalline state. The intensity ratio of these emissions is easily manipulated by changing the halide atom and excitation wavelength. Experimental and theoretical results successfully disclose the electronic nature of these multiple emissions: through-space conjugation for short-wavelength fluorescence, through-space charge transfer based on secondary through-space interactions for long-wavelength fluorescence, and room-temperature phosphorescence. The introduction of secondary through-space interactions to clusteroluminogens not only enriches their varieties of photophysical properties but also inspires the establishment of novel aggregate photophysics for clusteroluminescence.

Although mature and systematic theories of molecular photophysics have been developed, it is still challenging to endow clusteroluminogens (CLgens) with designed photophysical properties by manipulating through-space interactions. Here, the authors design three CLgens that show multiple emissions and white-light emission in the crystalline state, and emphasize the important role of secondary through-space interactions between the acceptor and non-conjugated donor units.

Metal-Free Organic Phosphors toward Fast and Efficient Room-Temperature Phosphorescence

ConspectusMetal-free purely organic phosphors (POPs) are promising materials for display technologies, solid-state lighting, and sensors platforms because of their advantageous properties such as large design windows, easy processability, and economic material cost. Unlike inorganic semiconductors, creating the conditions for triplet excitons to produce light in organic materials is a demanding task because of the presence of electron spin configurations that undergo spin-forbidden transitions, which is usually facilitated by spin-orbit coupling (SOC). In the absence of heavy metals, however, the SOC efficiency in POPs remains low, and consequently, external nonradiative photophysical processes will also severely affect triplet excitons. Addressing these challenges requires the development of rational molecular design principles to accurately account for how all conceivable structural, electronic, chemical, compositional factors affect materials performance.This Account summarizes important molecular design and matrix engineering strategies to tackle the two key challenges for POPs─boosting SOC efficiencies and suppressing nonradiative decays. We start by reviewing the fundamental understanding of internal and external factors affecting the emission efficiencies of POPs, including the theory behind SOC and the origin of nonradiative decays. Subsequently, we discuss the design of contemporary POP systems on the basis of research insights from our group and others, where SOC is mostly promoted by heavy atom effects and the El-Sayed rule. On one hand, nonmetal heavy atoms including Br, I, or Se provide the heavy atom effects to boost SOC. On the other hand, the El-Sayed rule addresses the necessity of orbital angular momentum change in SOC and the general utilization of carbonyl, heterocyclic rings, and other moieties with rich nonbonding electrons. Because of the slow-decaying nature of triplet excitons, engineering the matrices of POPs is critical to effectively suppress collisional quenching as the major nonradiative decay route, thus achieving POPs with decent room temperature quantum efficiency. For that purpose, crystalline or rigid amorphous matrices have been implemented along with specific intermolecular forces between POPs and their environment.Despite the great efforts made in the past decade, the intrinsic SOC efficiencies of POPs remain low, and their emission lifetimes are pinned in the millisecond to second regime. While this is beneficial for POPs with ultralong emission, designing high-SOC POPs with simultaneous fast decay and high quantum efficiencies is particularly advantageous for display systems. Following the design of contemporary POPs, we will discuss molecular design descriptors that could potentially break the current limit to boost internal SOC in purely organic materials. Our recently developed concept of "heavy atom oriented orbital angular momentum manipulation" will be discussed, accompanied by a rich and expanded library of fast and efficient POP molecules, which serves as a stepping stone into the future of this field. We will conclude this Account by discussing the noteworthy application of POPs in organic light-emitting diodes (OLEDs), solid-state lighting, and sensors, as well as the remaining challenges in the design of fast and efficient POPs.

Cross-Linked Polyphosphazene Nanospheres Boosting Long-Lived Organic Room-Temperature Phosphorescence

Long-lived organic room-temperature phosphorescence (RTP) has sparked intense explorations, owing to the outstanding optical performance and exceptional applications. Because triplet excitons in organic RTP experience multifarious relaxation processes resulting from their high sensitivity, spin multiplicity, inevitable nonradiative decay, and external quenchers, boosting RTP performance by the modulated triplet-exciton behavior is challenging. Herein, we report that cross-linked polyphosphazene nanospheres can effectively promote long-lived organic RTP. Through molecular engineering, multiple carbonyl groups (C═O), heteroatoms (N and P), and heavy atoms (Cl) are introduced into the polyphosphazene nanospheres, largely strengthening the spin-orbit coupling constant by recalibrating the electronic configurations between singlet (S_n) and triplet (T_n) excitons. In order to further suppress nonradiative decay and avoid quenching under ambient conditions, polyphosphazene nanospheres are encapsulated with poly(vinyl alcohol) matrix, thus synchronously prompting phosphorescence lifetime (173 ms longer), phosphorescence efficiency (∼12-fold higher), afterglow duration time (more than 20 s), and afterglow absolute luminance (∼19-fold higher) as compared with the 2,3,6,7,10,11-hexahydroxytriphenylene precursor. By measuring the emission intensity of the phosphorescence, an effective probe based on the nanospheres is developed for visible, quantitative, and expeditious detection of volatile organic compounds. More significantly, the obtained films show high selectivity and robustness for anisole detection (7.1 × 10^-4 mol L^-1). This work not only demonstrates a way toward boosting the efficiency of RTP materials but also provides a new avenue to apply RTP materials in feasible detection applications.

Heavy atom oriented orbital angular momentum manipulation in metal-free organic phosphors

Metal-free purely organic phosphors (POPs) are emerging materials for display technologies, solid-state lighting, and chemical sensors. However, due to limitations in contemporary design strategies, the intrinsic spin-orbit coupling (SOC) efficiency of POPs remains low and their emission lifetime is pinned in the millisecond regime. Here, we present a design concept for POPs where the two main factors that control SOC-the heavy atom effect and orbital angular momentum-are tightly coupled to maximize SOC. This strategy is bolstered by novel natural-transition-orbital-based computational methods to visualize and quantify angular momentum descriptors for molecular design. To demonstrate the effectiveness of this strategy, prototype POPs were created having efficient room-temperature phosphorescence with lifetimes pushed below the millisecond regime, which were enabled by boosted SOC efficiencies beyond 102 cm-1 and achieved record-high efficiencies in POPs. Electronic structure analysis shows how discrete tuning of heavy atom effects and orbital angular momentum is possible within the proposed design strategy, leading to a strong degree of control over the resulting POP properties.

Rigid Polymer Network-Based Autonomous Photoswitches Working in the Solid State Encoded by Room-Temperature Phosphorescence

Autonomous molecular switches with self-recoverability are of great theoretical and experimental interest since they can avoid additional chemical or energy imposition during the working process. Due to the high energy barrier, however, the solid state is generally unfavorable for materials to exhibit the autonomous switch behavior. To promote the practical usage of the autonomous molecular switch, herein, we propose a prototype of an autonomous photoswitch that can work in the solid state based on a rigid polymer network. A hexacarboxylic sodium-modified hexathiobenzene compound was employed as a photoexcitation-driven unit, which can undergo molecular aggregation upon irradiation because of the distinct conformational difference between the ground state and the photoexcited state. Then, we selected a relatively rigid polymer named poly(dimethyldiallylammonium)chloride (PDDA) to complex with the hexacarboxylic sodium-modified hexathiobenzene through electrostatic coupling. Through optimization, the photoexcitation-controlled molecular aggregation and its self-recovery can work well in the solid matrix of PDDA under rhythmical photoirradiation. This process can be easily encoded by a self-recoverable room-temperature phosphorescence, featuring an excellent performance of the autonomous switch.

Polyacrylamide-Based Binary Luminescent Copolymer Materials Exhibit Color-Tunable and Efficient Long-Lived Room Temperature Phosphorescence

Polymer-based pure organic room temperature phosphorescence (RTP) materials have garnered considerable interest, among which RTP systems with prolonged lifetimes and tunable emission colors are promising for applications in sensing, flexible electronics, bioassay, anti-counterfeiting, and data encryption. Herein, facile doping method is reported based on two types of copolymers with benzene/biphenyl-based light-emitting cores as their side chains, whereby the two copolymers are robustly crosslinked via noncovalent interactions including hydrogen bonding and halogen bonding that occur between the light-emitting cores and polyacrylamide backbones. Persistent RTP emission with prolonged lifetime up to 1.9 s and phosphorescence quantum yield as high as 40.1% are obtained in single copolymers, attributed to the conformation restriction of phosphorescent dyes originating from the rigid microenvironment. Furthermore, multicolor phosphorescence signals are observed in the doped binary luminescent copolymer systems that can be effectively regulated by the feed ratio of luminescent cores and irradiation wavelengths. Possible mechanisms for this efficient and long-lived color-tunable RTP system are discussed on the basis of the experimental data and theoretical calculations. In addition, it is also demonstrated that the color-tunable RTP emission of the doped copolymer systems under ambient conditions allows for further exploitation in the application of dynamic information encryption.

Combination of Two Colorless Fluorophores for Full-Color Red-Green-Blue Luminescence

Herein, a molecular pixel system for full-color luminescence reproduction is achieved by adjusting the colorless mixtures of two matching fluorophores, i.e., polarity-insensitive 9,14-diphenyl-9,14-dihydrodibenzo[a,c]phenazine (DPAC) as the fixed red primary color and polarity-sensitive dansylamide (DSA) as dynamic blue to green primary colors. DPAC and DSA possess independent emission properties free from electron and energy transfer crosstalk between them because of their close frontier molecular orbitals as well as similar absorptions below 400 nm. According to the additive color theory, under diverse mixing ratios and various polarities, a smooth emission color change is realized in the triangle surrounded by the luminophores in the chromaticity diagram with accurate prediction and expedient reproduction. The principle of this system may open an innovative route for the development of powerful full-color luminescent materials, for example, ratiometric fluorescent polarity sensors and invisible fluorescent crayons.

Enhancing the Operability of Photoexcitation-Controlled Aggregation-Induced Emissive Molecules in the Organic Phase

Controllable aggregation-induced emission luminogens (AIEgens) by photoexcitation can be conducted within a single solvent, thus opening new opportunities for preparing and processing smart materials. However, undesired side-reactions like photooxidation that can easily occur in the organic phase remain, limiting their applications. To enhance the operability of photoexcitation-controlled AIEgens (to specifically produce a phosphorescence characteristic) in the organic phase, in this work, we employ a typical prototype, hexathiobenzene, usually as the specific phosphorescent group, and investigate a series of physical and chemical factors, such as light intensity, dissolved oxygen content, and solvent polarity, to explore ways to control the photoexcitation-controllable AIEgens against the impurities from side-reactions. An organogel strategy was also developed to minimize interference factors and improve the practical application ability. We believe that the presented results provide new insights into the further development of the photoexcitation-based functional materials and the promotion of their practical usage.

Visualizing Material Processing via Photoexcitation-Controlled Organic-Phase Aggregation-Induced Emission

Aggregation-induced emission (AIE) has been much employed for visualizing material aggregation and self-assembly. However, water is generally required for the preparation of the AIE aggregates, the operation of which limits numerous material processing behaviors. Employing hexathiobenzene-based small molecules, monopolymers, and block copolymers as different material prototypes, we herein achieve AIE in pure organic phases by applying a nonequilibrium strategy, photoexcitation-controlled aggregation. This strategy enabled a dynamic change of molecular conformation rather than chemical structure upon irradiation, leading to a continuous aggregation-dependent luminescent enhancement (up to ~200-fold increase of the luminescent quantum yield) in organic solvents. Accompanied by the materialization of the nonequilibrium strategy, photoconvertible self-assemblies with a steady-state characteristic can be achieved upon organic solvent processing. The visual monitoring with the luminescence change covered the whole solution-to-film transition, as well as the in situ photoprocessing of the solid-state materials.

Aromatic Electrophilic Directing for Fluorescence and Room-Temperature Phosphorescence Modulation

The ability to modulate luminescence is crucial for organic light-emitting molecules. However, the correlation between molecular structure and emission is not always obvious and systematic. Here, using a well-established empirical rule on electrophilic substitution involving directing groups in organic chemistry, we present a model system, where two luminophores are covalently linked to benzene ortho, meta, and para to each other, to demonstrate that the rule can also be useful in predicting the fluorescence and phosphorescence behaviors of these disubstituted benzene molecules. The benzene ring works as a "molecular wire" that transduces electron density when the two luminophores form ortho- and para-isomers, while little to no transduction can be noted for the meta-isomer, based on well-established organic chemistry. We anticipate that many more "textbook examples" of electronic directing in organic chemistry can be used for systematic modulation of molecular fluorescence and room-temperature phosphorescence.

Boosting Wide-Range Tunable Long-Afterglow in 1D Metal-Organic Halide Micro/Nanocrystals for Space/Time-Resolved Information Photonics

Molecular afterglow materials with ultralong-lived excited states have attracted considerable interest owing to their promise for light-emitting devices, optical imaging, and anti-counterfeiting applications. However, the realization of ultralong afterglow emission in low-dimensional micro/nanostructures has remained an open challenge, limiting progress toward new-generation photonic applications. In this work, new types of mono/binuclear metal-organic halide micro/nanocrystals with tunable afterglow properties, made possibly by the rational control over both ultralong-lived room-temperature phosphorescence and thermally activated delayed fluorescence, are developed. Interestingly, the mono/binuclear coordination complexes present excitation-dependent luminescence across a wide range (wavelength > 150 nm) with broad emission color differences from blue to yellow owing to the multiple long-lived excited states. The 1D binuclear metal-organic microrods further exhibit excitation-dependent optical waveguide and space/time dual-resolved afterglow emission properties, endowing them with great potential in wavelength-division multiplexing information photonics and logic gates. Therefore, this work not only communicates the first example of wide-range tunable ultralong afterglow of low-dimensional metal-organic micro/nanocrystals under ambient conditions but also provides a new route to achieve optical communications and photonic logic compilation at the micro/nanoscale.

Thermochromic aggregation-induced dual phosphorescence via temperature-dependent sp3-linked donor-acceptor electronic coupling

Aggregation-induced emission (AIE) has proven to be a viable strategy to achieve highly efficient room temperature phosphorescence (RTP) in bulk by restricting molecular motions. Here, we show that by utilizing triphenylamine (TPA) as an electronic donor that connects to an acceptor via an sp³ linker, six TPA-based AIE-active RTP luminophores were obtained. Distinct dual phosphorescence bands emitting from largely localized donor and acceptor triplet emitting states could be recorded at lowered temperatures; at room temperature, only a merged RTP band is present. Theoretical investigations reveal that the two temperature-dependent phosphorescence bands both originate from local/global minima from the lowest triplet excited state (T₁). The reported molecular construct serves as an intermediary case between a fully conjugated donor-acceptor system and a donor/acceptor binary mix, which may provide important clues on the design and control of high-freedom molecular systems with complex excited-state dynamics.

Effective Internal and External Modulation of Nontraditional Intrinsic Luminescence

The rational modulation of the nontraditional intrinsic luminescence (NTIL) of nonconventional luminophores remains difficult, on account of the limited understanding on the structure-property relationships and emission mechanisms. Herein, the effective modulation of NTIL is demonstrated based on a group of nonaromatic anhydrides and imides. Mutual bridging of isolated subgroups effectively promotes intramolecular through-space conjugation (TSC), leading to red-shifted emission, enhanced efficiency, and prolonged persistent room-temperature phosphorescence (p-RTP). The substitution of heteroatoms from oxygen to nitrogen drastically changes the TSC and enhances intermolecular interactions, resulting in enhanced emission efficiency. In addition, upon freezing, compression, or embedding into polymer matrices, the emission intensity and color remain well regulated. These results shed new light on the rational modulation of the NTIL and p-RTP of nonconventional luminophores.