DNA-Driven Two-Layer Core-Satellite Gold Nanostructures for Ultrasensitive MicroRNA Detection in Living Cells

An advanced 3D DNA nanoplatform for spatiotemporally confined enhanced dual-mode biosensing MicroRNA in cancer cell

Dual-mode signal output platforms have demonstrated considerable promise due to their improved anti-interference capability and inherent signal self-correction. Nevertheless, traditional discrete-distributed signal probes often encounter significant drawbacks, including limited mass transfer efficiency, diminished signal strength, and instability in intricate biochemical environments. In response to these challenges, a scalable and hyper-compacted 3D DNA nanoplatform resembling "periodic focusing heliostat" has been developed for synergistically enhanced fluorescence (FL) and surface-enhanced Raman spectroscopy (SERS) biosensing of miRNA in cancer cells. Our approach utilized a distinctive assembly strategy integrating gold nanostars (GNS) as fundamental "heliostat units" linked by palindromic DNA sequences to facilitate each other hand-in-hand cascade alignment and condensed into large scale nanostructures. This configuration was further augmented by the incorporation of gold nanoparticles (GNP) via strong Au-S bonds, resulting in a sturdy framework for improved signal transduction. The initiation of this assembly process was mediated by the hybridization of dsDNA to miRNA-21, which served as a primer for polymerization and nicking reactions, thus generating a multifunctional T2 probe. This probe is intricately designed with three distinct parts: a 3'-palindromic end for structural integrity, a central region for capturing SERS-active probes (Cy3-P2), and a 5'-segment for attaching fluorescence reporters. Upon integration T2 into the GNS-based heliostat unit, it promotes palindromic arm-induced aggregation and plasma exciton coupling between plasma nanoparticles and signal transduction tags. This clustered arrangement creates a high-density "hot spot" array that maximizes the local electromagnetic fields necessary for enhanced SERS and FL response. This superstructure supports enhanced aggregation-induced signal amplification for both SERS and FL, offering exceptional sensitivity with LOD as low as 0.0306 pM and 0.409 pM. The efficacy of this method was demonstrated in the evaluation of miRNA-21 in various cancer cell lines.

Heteromultivalent DNA Enhances the Assembly Yield of Hybrid Nanoparticles and Facilitates Dynamic Disassembly for Bioanalysis Using ICP-MS

To obtain enhanced physical and biological properties, various nanoparticles are typically assembled into hybrid nanoparticles through the binding of multiple homologous DNA strands to their complementary counterparts, commonly referred to as homomultivalent assembly. However, the poor binding affinity and limited controllability of homomultivalent disassembly restrict the assembly yield and dynamic functionality of the hybrid nanoparticles. To achieve a higher binding affinity and flexible assembly choice, we utilized the paired heteromultivalency DNA to construct hybrid nanoparticles and demonstrate their excellent assembly characteristics and dynamic applications. Specifically, through heteromultivalency, DNA-functionalized magnetic beads (MBs) and gold nanoparticles (AuNPs) were efficiently assembled. By utilizing ICP-MS, the assembly efficiency of AuNPs on MBs was directly monitored, enabling quantitative analysis and optimization of heteromultivalent binding events. As a result, the enhanced assembly yield is primarily attributed to the fact that heteromultivalency allows for the maximization of effective DNA probes on the surface of nanoparticles, eliminating steric hindrance interference. Subsequently, with external oligonucleotides as triggers, it was revealed that the disassembly mechanism of hybrid nanoparticles was initiated, which was based on an increased local concentration rather than toehold-mediated displacement of paired heteromultivalency DNA probes. Capitalizing on these features, an output platform was then established based on ICP-MS signals that several Boolean operations and analytical applications can be achieved by simply modifying the design sequences. The findings provide new insights into DNA biointerface interaction, with potential applications to complex logic operations and the construction of large DNA nanostructures.

Simulation-Guided Rational Design of DNA Walker-Based Theranostic Platform

Biomolecule-functionalized nanoparticles represent a type of promising biomaterials in biomedical applications owing to their excellent biocompatibility and versatility. DNA-based reactions on nanoparticles have enabled emerging applications including intelligent biosensors, drug delivery, and biomimetic devices. Among the reactions, strand hybridization is the critical step to control the sensitivity and specificity of biosensing, and the efficiency of drug delivery. However, a comprehensive understanding of DNA hybridization on nanoparticles is still lacking, which may differ from the process in homogeneous solutions. To address this limitation, coarse-grained model-based molecular dynamic simulation is harnessed to disclose the critical factors involved in intermolecular hybridization. Based on simulation guidance, DNA walker-based smart theranostic platform (DWTP) based on "on-particle" hybridization is developed, showing excellent consistency with simulation. DWTP is successfully applied for highly sensitive miRNA 21 detection and tumor-specific miRNA 21 imaging, driven by tumor-endogenous APE 1 enzyme. It enables the precise release of antisense oligonucleotide triggered by tumor-endogenous dual-switch miRNA 21 and APE 1, facilitating effective gene silencing therapy with high biosafety. The simulation of "on-particle" DNA hybridization has improved the corresponding biosensing performance and the release efficiency of therapeutic agents, representing a conceptually new approach for DNA-based device design.

Origination of the chiroptical effect in plasmonic nano-structures in the view of quasi-normal mode theory

General chiroptical effects describe all of the interaction differences between light carrying opposite spins and chiral matters, such as circular dichroism, optical activity, and chiral Raman optical activity, and have been proven to hold great promise for extensive applications in physics, chemistry, and biology. However, the underlying physical mechanism is usually explained intangibly by the twisted currents in chiral geometry, where the cross coupling between the electric and magnetic dipoles breaks the degeneracy of the helicity eigenmodes. In this Letter, we construct a clear sight on the origination of the chiroptical effect in the view of the eigenstates of a non-Hermitian system, i.e., quasi-normal modes (QNMs). The intrinsic chiroptical effect comes from the chiral QNMs, which have distinct excitation and emission differences in both phase and intensity for lights carrying opposite spins, while the extrinsic chiroptical effect coming from the achiral QNMs requires specific illumination and observation conditions, where the low symmetrical QNM can generate chiroptical effects in both absorption and scattering, but the highly symmetrical QNMs can only generate chiroptical effects in scattering through the coherent superposition of several QNMs. Our findings offer an in-depth understanding of the chiroptical effect and have the potential to bring broad inspiration to the design and applications of chiroptical effects.

Recent Advances in the 3D Chiral Plasmonic Nanomaterials

From the view of geometry, chirality is that an object cannot overlap with its mirror image, which has been a fundamental scientific problem in biology and chemistry since the 19th century. Chiral inorganic nanomaterials serve as ideal templates for investigating chiral transfer and amplification mechanisms between molecule and bulk materials, garnering widespread attentions. The chiroptical property of chiral plasmonic nanomaterials is enhanced through localized surface plasmon resonance effects, which exhibits distinctive circular dichroism (CD) response across a wide wavelength range. Recently, 3D chiral plasmonic nanomaterials are becoming a focal research point due to their unique characteristics and planar-independence. This review provides an overview of recent progresses in 3D chiral plasmonic nanomaterials studies. It begins by discussing the mechanisms of plasmonic enhancement of molecular CD response, following by a detailed presentation of novel classifications of 3D chiral plasmonic nanomaterials. Finally, the applications of 3D chiral nanomaterials such as biology, sensing, chiral catalysis, photology, and other fields have been discussed and prospected. It is hoped that this review will contribute to the flourishing development of 3D chiral nanomaterials.

DNA-Based Gold Nanoparticle Assemblies: From Structure Constructions to Sensing Applications

Gold nanoparticles (Au NPs) have become one of the building blocks for superior assembly and device fabrication due to the intrinsic, tunable physical properties of nanoparticles. With the development of DNA nanotechnology, gold nanoparticles are organized in a highly precise and controllable way under the mediation of DNA, achieving programmability and specificity unmatched by other ligands. The successful construction of abundant gold nanoparticle assembly structures has also given rise to the fabrication of a wide range of sensors, which has greatly contributed to the development of the sensing field. In this review, we focus on the progress in the DNA-mediated assembly of Au NPs and their application in sensing in the past five years. Firstly, we highlight the strategies used for the orderly organization of Au NPs with DNA. Then, we describe the DNA-based assembly of Au NPs for sensing applications and representative research therein. Finally, we summarize the advantages of DNA nanotechnology in assembling complex Au NPs and outline the challenges and limitations in constructing complex gold nanoparticle assembly structures with tailored functionalities.

Probing Interactions between Chiral Plasmonic Nanoparticles and Biomolecules

Chiral plasmonic nanoparticles (and their assemblies) interact with biomolecules in a variety of different ways, resulting in distinct optical signatures when probed by circular dichroism spectroscopy. These systems show promise for biosensing applications and offer several advantages over achiral plasmonic systems. Arguably the most notable advantage is that chiral nanoparticles can differentiate between molecular enantiomers and can, therefore, act as sensors for enantiomeric purity. Furthermore, chiral nanoparticles can couple more effectively to chiral biomolecules in biological systems if they have a matching handedness, improving their effectiveness as biomedical agents. In this article, we review the different types of interactions that occur between chiral plasmonic nanoparticle systems and biomolecules, and discuss how circular dichroism spectroscopy can probe these interactions and inform how to optimize systems for biosensing and biomedical applications.

DNA Assembly of Plasmonic Nanostructures Enables In Vivo SERS-Based MicroRNA Detection and Tumor Photoacoustic Imaging

Controllable self-assembly of the DNA-linked gold nanoparticle (AuNP) architecture for in vivo biomedical applications remains a key challenge. Here, we describe the use of the programmed DNA tetrahedral structure to control the assembly of three different types of AuNPs (∼20, 10, and 5 nm) by organizing them into defined positioning and arrangement. A DNA-assembled "core-satellite" architecture is built by DNA sequencing where satellite AuNPs (10 and 5 nm) surround a central core AuNP (20 nm). The density and arrangement of the AuNP satellites around the core AuNP were controlled by tuning the size and amount of the DNA tetrahedron functionalized on the core AuNPs, resulting in strong electromagnetic field enhancement derived from hybridized plasmonic coupling effects. By conjugating with the Raman molecule, strong surface-enhanced Raman scattering photoacoustic imaging signals could be generated, which were able to image microRNA-21 and tumor tissues in vivo. These results provided an efficient strategy to build precision plasmonic superstructures in plasmonic-based bioanalysis and imaging.

Programmable Nanostructures Based on Framework-DNA for Applications in Biosensing

DNA has been actively utilized as bricks to construct exquisite nanostructures due to their unparalleled programmability. Particularly, nanostructures based on framework DNA (F-DNA) with controllable size, tailorable functionality, and precise addressability hold excellent promise for molecular biology studies and versatile tools for biosensor applications. In this review, we provide an overview of the current development of F-DNA-enabled biosensors. Firstly, we summarize the design and working principle of F-DNA-based nanodevices. Then, recent advances in their use in different kinds of target sensing with effectiveness have been exhibited. Finally, we envision potential perspectives on the future opportunities and challenges of biosensing platforms.

Polydopamine-coated i-motif DNA/Gold nanoplatforms for synergistic photothermal-chemotherapy

The combination of photothermal therapy with chemotherapy has gradually developed into promising cancer therapy. Here, a synergistic photothermal-chemotherapy nanoplatform based on polydopamine (PDA)-coated gold nanoparticles (AuNPs) were facilely achieved via the in situ polymerization of dopamine (DA) on the surface of AuNPs. This nanoplatform exhibited augmented photothermal conversion efficiency and enhanced colloidal stability in comparison with uncoated PDA shell AuNPs. The i-motif DNA nanostructure was assembled on PDA-coated AuNPs, which could be transformed into a C-quadruplex structure under an acidic environment, showing a characteristic pH response. The PDA shell served as a linker between the AuNPs and the i-motif DNA nanostructure. To enhance the specific cellular uptake, the AS1411 aptamer was introduced to the DNA nanostructure employed as a targeting ligand. In addition, Dox-loaded NPs (DAu@PDA-AS141) showed the pH/photothermal-responsive release of Dox. The photothermal effect of DAu@PDA-AS141 elicited excellent photothermal performance and efficient cancer cell inhibition under 808 nm near-infrared (NIR) irradiation. Overall, these results demonstrate that the DAu@PDA-AS141 nanoplatform shows great potential in synergistic photothermal-chemotherapy.

Bifunctional M13 Phage as Enzyme Container for the Reinforced Colorimetric-Photothermal Dual-Modal Sensing of Ochratoxin A

"Point of care" (POC) methods without expensive instruments and special technicians are greatly needed for high-throughput analysis of mycotoxins. In comparison, the most widely used screening method of the conventional enzyme-linked immunosorbent assay (ELISA) confronts low sensitivity and harmful competing antigens. Herein, we develop a plasmonic-photothermal ELISA that allows precise readout by color-temperature dual-modal signals based on enzymatic reaction-induced AuNP aggregation for highly sensitive detection of ochratoxin A (OTA). The bifunctional M13 phage carrying OTA that mimics the mimotope on the end of p3 proteins and abundant biotin molecules on the major p8 proteins is adopted as an eco-friendly competing antigen and enzyme container for amplifying the signal intensity. Under optimal conditions, both colorimetric and photothermal signals enable good dynamic linearity for quantitative OTA detection with the limits of detection at 12.1 and 8.6 pg mL-1, respectively. Additionally, the proposed ELISA was adapted to visual determination with a cutoff limit of 78 pg mL-1 according to a vivid color change from deep blue to red. The recoveries of OTA-spiked corn samples indicate the high accuracy and robustness of the proposed method. In conclusion, our proposed strategy provides a promising method for eco-friendly and sensitive POC screening of OTA. Moreover, it can be easily applied to other analytes by changing the involved specific mimotope sequence.

Gold-Nanoparticle-Based Chiral Plasmonic Nanostructures and Their Biomedical Applications

As chiral antennas, plasmonic nanoparticles (NPs) can enhance chiral responses of chiral materials by forming hybrid structures and improving their own chirality preference as well. Chirality-dependent properties of plasmonic NPs broaden application potentials of chiral nanostructures in the biomedical field. Herein, we review the wet-chemical synthesis and self-assembly fabrication of gold-NP-based chiral nanostructures. Discrete chiral NPs are mainly obtained via the seed-mediated growth of achiral gold NPs under the guide of chiral molecules during growth. Irradiation with chiral light during growth is demonstrated to be a promising method for chirality control. Chiral assemblies are fabricated via the bottom-up assembly of achiral gold NPs using chiral linkers or guided by chiral templates, which exhibit large chiroplasmonic activities. In describing recent advances, emphasis is placed on the design and synthesis of chiral nanostructures with the tuning and amplification of plasmonic circular dichroism responses. In addition, the review discusses the most recent or even emerging trends in biomedical fields from biosensing and imaging to disease diagnosis and therapy.

Exosome detection via surface-enhanced Raman spectroscopy for cancer diagnosis

As nanoscale extracellular vesicles, exosomes are secreted by various cell types, and they are widely distributed in multiple biological fluids. Studies have shown that tumor-derived exosomes can carry a variety of primary tumor-specific molecules, which may represent a novel tool for the early detection of cancer. However, the clinical translation of exosomes remains a challenge due to the requirement of large quantities of samples when enriching the cancer-related exosomes in biological fluids, the insufficiency of traditional techniques for exosome subpopulations, and the complex exosome isolation of the current commercially available exosome phenotype profiling approaches. The evolving surface-enhanced Raman scattering (SERS) technology, with properties of unique optoelectronics, easy functionalization, and the particular interaction between light and nanoscale metallic materials, can achieve sensitive detection of exosomes without large quantities of samples and multiplexed phenotype profiling, providing a new mode of real-time and noninvasive analysis for cancer patients. In the present review, we mainly discussed exosome detection based on SERS, especially SERS immunoassay. The basic structure and function of exosomes were firstly introduced. Then, recent studies using the SERS technique for cancer detection were critically reviewed, which mainly included various SERS substrates, biological modification of SERS substrates, SERS-based exosome detection, and the combination of SERS and other technologies for cancer diagnosis. This review systematically discussed the essential aspects, limitations, and considerations of applying SERS technology in the detection and analysis of cancer-derived exosomes, which could provide a valuable reference for the early diagnosis of cancer through SERS technology. STATEMENT OF SIGNIFICANCE: Surface-enhanced Raman scattering (SERS) has been applied to exosomes detection to obtain better diagnostic results. In past three years, several reviews have been published in exosome detection, which were narrowly focus on methods of exosome detection. Selection and surface functionalization of the substrate and the combination detection with different methods based on SERS will provide new strategies for the detection of exosomes. This review will focus on the above aspects. This emerging detection method is constantly evolving and contributing to the early discovery of diseases in the future.

Biocatalysis-mediated MOF-to-prussian blue transformation enabling sensitive detection of NSCLC-associated miRNAs with dual-readout signals

Sensitive and accurate miRNAs assay is critical for early diagnosis of non-small-cell lung carcinomas (NSCLC). Herein, we demonstrate a photothermal and electrochemical dual-readout assay method for miRNA detection based on a novel biocatalysis-mediated MOF-to-prussian blue (PB) transformation (BMMPT) strategy and the catalytic hairpin assembly (CHA) amplification strategy. It is found that the Fe²⁺-based MOF (MOF-Fe²⁺) can act as the Fe²⁺ source to react with K₃[Fe(CN)₆], leading to the in-situ formation of prussian blue (PB) on MOF-Fe²⁺. Due the inherent near-infrared (NIR) photothermal conversion ability and electrochemical signal of PB, the resulting PB@MOF-Fe²⁺ is employed to arouse temperature readout or electrochemical signal. The presence of target miRNA-21 triggers the CHA reaction on magnetic beads (MBs), resulting the capture of numerous glucose oxidase (GOx) tags on MBs. The GOx tags then catalyze the generation of H₂O₂ using glucose as substrate. The H₂O₂ is used to inhibit the MOF-to-PB transformation process by oxidizing Fe²⁺ into Fe³⁺, leading to the decrease in temperature and electrochemical readout aroused by PB@MOF-Fe²⁺. By this means, a signal-off assay mode with dual readout is established for miRNA-21. Under the optimal conditions, using temperature readout or electrochemical readout, miRNA-21 can be detected at concentrations as low as 0.3 fM and 0.32 fM, respectively. Moreover, the developed method is successfully applied to evaluate the expression level of miRNA-21 in serum of NSCLC patients. This work not only provides a practical tool for NSCLC diagnosis but also presents the new features of MOF materials as signal transduction tags.

Biological applications of chiral inorganic nanomaterials

Chirality is common in nature and plays the essential role in maintaining physiological process. Chiral inorganic nanomaterials with intense optical activity have attracted more attention due to amazing properties in recent years. Over the past decades, many efforts have been paid to the preparation and chirality origin of chiral nanomaterials; furthermore, emerging biological applications have been investigated widely. This review mainly summarizes recent advances in chiral nanomaterials. The top-down and bottom-up preparation methods and chirality origin of chiral nanomaterials are introduced; besides, the biological applications, such as sensing, therapy, and catalysis, will be introduced comprehensively. Finally, we also provide a perspective on the biomedical applications of chiral nanomaterials.

Electrochemical sensor propelled by exonuclease III for highly efficient microRNA-155 detection

We constructed an electrochemical sensor, propelled by exonuclease III, for highly efficient microRNA-155 detection. The detection performance of the sensor was excellent, with a detection limit as low as 0.035 fM.

Hairpin-functionalized DNA tetrahedra for miRNA imaging in living cells via self-assembly to form dendrimers

A DNA tetrahedron-based intramolecular catalytic hairpin self-assembly platform that uses fluorescence signals to image miRNAs in live cells for accurate tumor cell identification.

Synthesis of SERS-active core-satellite nanoparticles using heterobifunctional PEG linkers

Surface-enhanced Raman scattering (SERS) is a sensitive analytical technique capable of magnifying the vibrational intensity of molecules adsorbed onto the surface of metallic nanostructures. Various solution-based SERS-active metallic nanostructures have been designed to generate substantial SERS signal enhancements. However, most of these SERS substrates rely on the chemical aggregation of metallic nanostructures to create strong signals. While this can induce high SERS intensities through plasmonic coupling, most chemically aggregated assemblies suffer from poor signal reproducibility and reduced long-term stability. To overcome these issues, here we report for the first time the synthesis of gold core-satellite nanoparticles (CSNPs) for robust SERS signal generation. The novel CSNP assemblies consist of a 30 nm spherical gold core linked to 18 nm satellite particles via linear heterobifunctional thiol-amine terminated PEG chains. We explore the effects that the varying chain lengths have on SERS hot-spot generation, signal reproducibility and long-term activity. The chain length was varied by using PEGs with different molecular weights (1000 Da, 2000 Da, and 3500 Da). The CSNPs were characterized via UV-Vis spectrophotometry, transmission electron microscopy (TEM), ζ-potential measurements, and lastly SERS measurements. The versatility of the synthesized SERS-active CSNPs was revealed through characterization of optical stability and SERS enhancement at 0, 1, 3, 5, 7 and 14 days.

Recent Advances in Inorganic Chiral Nanomaterials

Inorganic nanoparticles offer a multifunctional platform for biomedical applications in drug delivery, biosensing, bioimaging, disease diagnosis, screening, and therapies. Homochirality prevalently exists in biological systems composed of asymmetric biochemical activities and processes, so biomedical applications essentially favor the usage of inorganic chiral nanomaterials, which have been widely studied in the past two decades. Here, the latest investigations are summarized including the characterization of 3D stereochirality, the bionic fabrication of hierarchical chirality, extension of the compositional space to poly-elements, studying optical activities with the (sub-)single-particle resolution, and the experimental demonstration in biomedical applications. These advanced studies pave the way toward fully understanding the two important chiral effects (i.e., the chiroptical and enantioselective effects), and prospectively promote the flexible design and fabrication of inorganic chiral nanoparticles with engineerable functionalities to solve diverse practical problems closely associated with environment and public health.

DNA Logic Nanodevices for Real-Time Monitoring of ATP in Lysosomes

DNA logic nanodevices have prospects in molecular recognitions but still face challenges in achieving DNA computation-controlled regulation in specific compartments of living cells. By incorporating the i-motif sequence and ATP aptamers into a Y-shaped DNA (Y-DNA) structure, and applying gold nanoparticles (AuNPs) as the transporting carrier, herein we present a new type of DNA logic nanodevices to monitor the ATP levels in lysosomes of living cells. Triple energy transfers including dual fluorescent resonance energy transfers (FRETs) and a nanometal surface energy transfer (NSET) occurred in the DNA logic nanodevices. It was identified that the proposed nanodevices perform an AND logic operation to output FRET signals only when an endogenous proton and ATP simultaneously exist in the cellular microenvironment. Owing to the use of the i-motif sequence, the nanodevices have lysosome-recognizing capacity without causing alkalization of the acidic organelle, making DNA computation-controlled regulation at the level of cellular organelles achievable. These DNA logic nanodevices show high application prospects in lysosome-related cellular function and disease treatment.

Target-Triggered Nanomaterial Self-Assembly Induced Electromagnetic Hot-Spot Generation for SERS-Fluorescence Dual-Mode In Situ Monitoring MiRNA-Guided Phototherapy

A multifunctional theranostic nanosystem that integrates dynamic monitoring and therapeutic functions is necessary for precision tumor medicine. Herein, an entropy-driven self-assembly nanomachine is developed that overcomes the mechanism differences of different diagnostic modes and is applied to miRNA surface-enhanced Raman scattering (SERS)-fluorescence dual-mode dynamic monitoring and synergy phototherapy. It is worth noting that the activated dual-mode theranostic nanosystem (DTN) is capable of tumor in situ fluorescence imaging and SERS absolute quantification of the target. After being internalized into tumor cells, the DTN nanosystem is activated by the DNA cascade chain displacement of the target miR-21, resulting in the secondary release of fluorophores and the assembly of core-satellite structures (CS structures). The coupling of localized surface plasmon resonances (LSPRs) in the CS structure results in the formation of numerous enhanced electric fields (hot spot) in the nanogap of the CS structure. Then the DTN nanosystem greatly improves the sensitivity and repeatability of Raman detection by converting trace targets into numerous adenines residing in the electromagnetic hot spot of the CS structure. Meanwhile, the CS structure and the loaded photosensitizer are used for synergy phototherapy under the guidance of fluorescence imaging. This proposed strategy is confirmed by in vivo and in vitro results, and it provides new ideas for tumor SERS-fluorescence dual-mode diagnosis and effective tumor therapy.

Shining light on chiral inorganic nanomaterials for biological issues

The rapid development of chiral inorganic nanostructures has greatly expanded from intrinsically chiral nanoparticles to more sophisticated assemblies made by organics, metals, semiconductors, and their hybrids. Among them, lots of studies concerning on hybrid complex of chiral molecules with achiral nanoparticles (NPs) and superstructures with chiral configurations were accordingly conducted due to the great advances such as highly enhanced biocompatibility with low cytotoxicity and enhanced penetration and retention capability, programmable surface functionality with engineerable building blocks, and more importantly tunable chirality in a controlled manner, leading to revolutionary designs of new biomaterials for synergistic cancer therapy, control of enantiomeric enzymatic reactions, integration of metabolism and pathology via bio-to nano or structural chirality. Herein, in this review our objective is to emphasize current research state and clinical applications of chiral nanomaterials in biological systems with special attentions to chiral metal- or semiconductor-based nanostructures in terms of the basic synthesis, related circular dichroism effects at optical frequencies, mechanisms of induced optical chirality and their performances in biomedical applications such as phototherapy, bio-imaging, neurodegenerative diseases, gene editing, cellular activity and sensing of biomarkers so as to provide insights into this fascinating field for peer researchers.

DNA-based plasmonic nanostructures and their optical and biomedical applications

In the past few decades, DNA nanotechnology has been developed a lot due to their appealing features such as structural programmability and easy functionalization. In the emerging field of DNA nanotechnology, DNA molecules are regarded not only as biological information carriers but also as building blocks in the assembly of various two-dimensional and three-dimensional nanostructures, serving as outstanding templates for the bottom-up fabrication of plasmonic nanostructures. By arranging nanoparticles with different components and morphologies on the predesigned DNA templates, various static and dynamic plasmonic nanostructures with tailored optical properties have been obtained. In this review, we summarized recent advances in the design and construction of static and dynamic DNA-based plasmonic nanostructures. In addition, we addressed their emerging applications in the fields of optics and biosensors. At the end of this review, the open questions and future directions of DNA-based plasmonic nanostructure are also discussed.

Many Birds, One Stone: A Smart Nanodevice for Ratiometric Dual-Spectrum Assay of Intracellular MicroRNA and Multimodal Synergetic Cancer Therapy

The development of a theragnostic platform integrating precise diagnosis and effective treatment is significant but still extremely challenging. Herein, an integrated smart nanodevice composed of Au@Cu_2-xS@polydopamine nanoparticles (ACSPs) and fuel DNA-conjugated tetrahedral DNA nanostructures (fTDNs) was constructed, in which the ACSP nanoprobe played multiple key roles in antitumor therapy as well as in situ monitoring of microRNAs (miRNAs) in cancer cells. Regarding the analysis, the ACSP probe contained two optical properties: excellent surface-enhanced Raman scattering (SERS) enhancement and high fluorescence (FL) quenching performance. Employing the ACSPs as the high-efficiency detection substrate combined with the fTDN-assisted DNA walking nanomachines as the superior amplification strategy, a SERS-FL dual-spectrum biosensor was constructed, which achieved an ultralow background signal and excellent sensitivity with detection limits of 0.11 pM and 4.95 aM by FL and SERS, respectively. Moreover, the rapid FL imaging and precise SERS quantitative detection for miRNA in cancer cells were also achieved by dual-signal ratio strategy, improving the accuracy of diagnosis. Regarding the therapeutic application, due to the high reactive oxygen species generation ability and excellent photothermal conversion efficiency, the ACSPs can also act as an all-in-one nanoagent for multimodal collaborative tumor therapy. Significantly, both in vivo and in vitro experiments confirmed its high biological safety and strong anticancer effect, indicating its promising theragnostic applications.

Ligand-Free Fabrication of Ag Nanoassemblies for Highly Sensitive and Reproducible Surface-Enhanced Raman Scattering Sensing of Antibiotics

The assemblies of plasmonic nanoparticles (NPs) are the universal methods for enhancing their surface-enhanced Raman scattering (SERS) activities. However, the present methods suffer from the problems of poor reproducibility, complicated fabrication, or the adsorption of ligands on the surface, which limit their practical applications. In this work, by using a facile freeze-thaw method, we are able to fabricate the assemblies of Ag NPs with highly reproducible SERS activity without the use of ligands. Moreover, the Ag NPs can be well kept in a frozen state for a long time with few influences on the reproducibility (relative standard deviation, RSD ca. 7%), while those kept in colloid (4 °C) suffer from gradual surface oxidation and aggregation. Such a simple freeze-thaw method does not require the introduction of any ligands (or linkers) with long-term stability and reproducibility, implying its wide applications in practical SERS sensing.

Extension of Compositional Space to the Ternary in Alloy Chiral Nanoparticles through Galvanic Replacement Reactions

Metal chiral nanoparticles (CNPs), composed of atomically chiral lattices, are an emerging chiral nanomaterial showing unique asymmetric properties. Chirality transmission from the host CNPs mediated with galvanic replacement reactions (GRRs) has been carried out to extend their compositional space from the unary to binary. Further compositional extension to, e.g., the ternary is of fundamental interest and in practical demand. Here, layer-by-layer glancing angle deposition is used to dope galvanically "inert" dopant Au in the host Cu CNPs to generate binary Cu:Au CNPs. The "inert" dopants serve as structural scaffold to assist the chirality transmission from the host to the third metals (M: Pt and Ag) cathodically precipitating in the CNPs, enabling the formation of polycrystalline ternary Cu:Au:M CNPs whose compositions are tailored with engineering the GRR duration. More scaffold Au atoms are favored for the faster chirality transfer, and the Au-assisted chirality transfer follows the first-order kinetics with the reaction rate coefficient of ≈0.3 h-1 at room temperature. This work provides further understanding of the GRR-mediated chirality transfer and paves the way toward enhancing the application functions in enantiodifferentiation, enantioseperation, asymmetric catalysis, bioimaging, and biodetection.

Core-Satellite Gold Nanoparticle Complexes Grown by Inert Gas-Phase Condensation

Spontaneous growth of complexes consisted of a number of individual nanoparticles in a controlled manner, particularly in demanding environments of gas-phase synthesis, is a fascinating opportunity for numerous potential applications. Here, we report the formation of such core-satellite gold nanoparticle structures grown by magnetron sputtering inert gas condensation. Combining high-resolution scanning transmission electron microscopy and computational simulations, we reveal the adhesive and screening role of H2O molecules in formation of stable complexes consisted of one nanoparticle surrounded by smaller satellites. A single layer of H2O molecules, condensed between large and small gold nanoparticles, stabilizes positioning of nanoparticles with respect to one another during milliseconds of the synthesis time. The lack of isolated small gold nanoparticles on the substrate is explained by Brownian motion that is significantly broader for small-size particles. It is inferred that H2O as an admixture in the inert gas condensation opens up possibilities of controlling the final configuration of the different noble metal nanoparticles.