Tunable Metal-Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake

High-Performance Adsorbent for Ethane/Ethylene Separation Selected through the Computational Screening of Aluminum-Based Metal-Organic Frameworks

The development of a high-performance ethane (C₂H₆)-selective adsorbent for the separation of ethane/ethylene (C₂H₆/C₂H₄) gas mixtures has been investigated for high-efficiency adsorption-based gas separation. Herein, we investigated Al-based metal-organic frameworks (MOFs) to identify an efficient C₂H₆-selective adsorbent (CAU-11), supported by a computational simulation study. CAU-11 exhibited numerous advantageous properties (such as low material cost, structural robustness, high reaction yield, and high C₂H₆/C₂H₄ selectivity) compared to other Al-based MOFs, indicating immense potential as a C₂H₆-selective adsorbent. CAU-11 exhibited preferential C₂H₆ adsorption in single-component gas adsorption experiments, and its predicted ideal adsorption solution theory selectivity of C₂H₆/C₂H₄ was over 2.1, consistent with the simulation analysis. Dynamic breakthrough experiments using representative compositions of the C₂H₆/C₂H₄ gas mixture confirmed the excellent separation ability of CAU-11; it produced high-purity C₂H₄ (>99.95%) with productivity values of 0.79 and 2.02 mol L^-1 while repeating the cyclic experiment with 1:1 and 1:15 v/v C₂H₆/C₂H₄ gas mixtures, respectively, at 298 K and 1 bar. The high C₂H₆/C₂H₄ separation ability of CAU-11 could be attributed to its non-polar pore environment and optimum pore dimensions which strengthen the interaction of its pores (via C-H···π interactions) with C₂H₆ to a greater extent than with C₂H₄.

A (3,8)-Connected Metal-Organic Framework with Bending Dicarboxylate Linkers for C2H2/CO2 Separation

Herein, by replacement of the linear terephthalate linker with the bending 2,5-thiophenedicarboxylate (tdc^2-) linker in the typical (3,9)-connected metal-organic framework, with a reduced 8-connected hydroxyl-centered trinuclear cluster, a new (3,8)-connected network, [Ni₃(μ₃-OH)(tdc)₃(tpp)] [DZU-1; tpp = 2,4,6-tris(4-pyridyl)pyridine], was synthesized. The modified pore environment enables DZU-1 to selectively adsorb C₂H₂ over CO₂ in an efficient manner.

A MOF Multifunctional Cargo Vehicle for Reactive Gas Delivery and Catalysis

Efficient delivery of reactive and toxic gaseous reagents to organic reactions was studied using metal-organic frameworks (MOFs). Simultaneous cargo vehicle and catalytic capabilities of several MOFs were probed for the first time using the examples of  aromatization, aminocarbonylation, and carbonylative Suzuki-Miyaura coupling reactions. These reactions highlight that MOFs can serve a dual role as a gas cargo vehicle and a catalyst,  leading to product formation with yields similar to reactions employing pure gases. Furthermore, the MOFs can be recycled without sacrificing product yield, while simultaneously maintaining crystallinity. The reported findings were supported crystallographically and spectroscopically (e.g.,  diffuse reflectance infrared Fourier transform spectroscopy), foreshadowing a pathway for the development of multifunctional MOF-based reagent-catalyst cargo vessels for reactive reagents, as an attractive alternative to the use of toxic pure gases or gas generators.

Low-Concentration C2 H6 Capture Enabled by Size Matching in the Ultramicropore

Low-concentration ethane capture is crucial for environmental protection and natural gas purification. The ideal physisorbent with strong C₂ H₆ interaction and large C₂ H₆ uptake at low-concentration level has rarely been reported, due to the large pK_a value and small quadrupole moment of C₂ H₆ . Herein, we demonstrate the perfectly size matching between the ultramicropore (pore size of 4.6 Å) and ethane (kinetic diameter of 4.4 Å) in a nickel pyridine-4-carboxylate metal-organic framework (IISERP-MOF2), which enables the record-breaking performance for low concentration C₂ H₆ capture. IISERP-MOF2 exhibits the large C₂ H₆ adsorption enthalpy of 56.7 kJ/mol, and record-high C₂ H₆ uptake at low pressure of 0.01-0.1 bar and 298 K (1.8 mmol/g at 0.01 bar). Molecule simulations and C₂ H₆ -loading crystal structure analysis revealed that the maximized interaction sites in IISERP-MOF2 with ethane molecule originates the strong C₂ H₆ adsorption. The dynamic breakthrough experiments for gas mixtures of C₂ H₆ /N₂ (1/999, v/v) and C₂ H₆ /CH₄ (5/95, v/v) proved the excellent low-concentration C₂ H₆ capture performance.

Rational Construction and Performance Regulation of an In(III)-Tetraisophthalate Framework for One-Step Adsorption-Phase Purification of C2H4 from C2 Hydrocarbons

The development of porous materials for ethylene (C₂H₄) separation and purification, a very important separation process in the chemical industry, is urgently needed but quite challenging. In particular, the realization of selectivity-reversed adsorption (namely, C₂H₄ is not preferentially adsorbed) and the simultaneous capture of multinary coexisting impurities such as ethane (C₂H₆) and acetylene (C₂H₂) will significantly simplify process design and reduce energy and cost consumption, but such porous materials are quite difficult to design and have not yet been fully explored. In this work, by employing an aromatic-rich bithiophene-based tetraisophthalate ligand, we solvothermally fabricated an anionic In(III)-based framework termed ZJNU-115 featuring In(COO)₄ as an inorganic secondary building unit as well as one-dimensional channels. Due to the absence of unsaturated metallic sites, together with aromatic-rich channel surface decorated with abundant hydrogen-bonding acceptors of carboxylate oxygen and thiophene sulfur atoms, desolvated ZJNU-115 exhibited an unusual adsorption relationship with respect to C₂ hydrocarbons, namely, simultaneous and preferable capture of C₂H₆ and C₂H₂ over C₂H₄ at the temperatures investigated, thus representing a rare metal-organic framework (MOF) with the promising potential for one-step adsorption-phase purification of C₂H₄ from a trinary C₂ hydrocarbon mixture. Compared to a few of the MOFs reported for such an application, ZJNU-115 displayed simultaneously good adsorption selectivities of both C₂H₂ and C₂H₆ over C₂H₄. Furthermore, its separation potential can be postsynthetically tailored by substituting dimethylammonium (Me₂NH₂⁺) counterions with tetraalkyl ammonium ions (NR₄⁺; R = Me, Et, or n-Pr). More importantly, ZJNU-115 was stable in various organic solvents as well as aqueous solutions with pH values ranging from 5 to 9, thus laying a solid foundation for its practical applications. The design principle and the performance regulation strategy adopted in this work will offer valuable guidance for the contrapuntal construction of porous MOFs employed for direct multicomponent purification of C₂H₄ with improved performance.

Beyond structural motifs: the frontier of actinide-containing metal-organic frameworks

In this perspective, we feature recent advances in the field of actinide-containing metal-organic frameworks (An-MOFs) with a main focus on their electronic, catalytic, photophysical, and sorption properties. This discussion deviates from a strictly crystallographic analysis of An-MOFs, reported in several reviews, or synthesis of novel structural motifs, and instead delves into the remarkable potential of An-MOFs for evolving the nuclear waste administration sector. Currently, the An-MOF field is dominated by thorium- and uranium-containing structures, with only a few reports on transuranic frameworks. However, some of the reported properties in the field of An-MOFs foreshadow potential implementation of these materials and are the main focus of this report. Thus, this perspective intends to provide a glimpse into the challenges, triumphs, and future directions of An-MOFs in sectors ranging from the traditional realm of gas sorption and separation to recently emerging areas such as electronics and photophysics.