Incorporation of Al3+ Sites on Brønsted Acid Metal-Organic Frameworks for Glucose-to-Hydroxylmethylfurfural Transformation

High-Efficiency Solar Transformation of Sugars via a Heterogenous Gallium(III) Catalyst

Extremely limited research exploring the photocatalytic potential of main group metals, such as aluminum, gallium, and tin, has been undertaken due to their weak light harvesting properties. This study reports the efficient transformation of sugars to 5-hydroxymethylfurfural (HMF) with high yield employing an original heterogeneous photocatalyst comprising a gallium(III) complex immobilized on an alumina support. Under visible light irradiation, the reaction rate of HMF formation is ~143 times higher than the equivalent thermal reaction performed in the absence of light. The turnover number (TON) of the heterogeneous gallium(III) photocatalyst was as high as 1500, which was ca. two orders of magnitude higher than the TON of the homogeneous gallium(III) system. It is proposed that photoirradiation significantly enhances the Lewis acidity of the catalyst by forming a semi-coordination state between gallium(III) and N-donor ligands, enabling the increased interaction of reactant sugar molecules with gallium(III) active sites. Consistent with this, the photoresponsive coordination of the gallium(III) complex and the abstraction of the hydroxy group by the metal under irradiation with visible light is observed by NMR spectroscopy for the first time. These findings demonstrate that efficient photocatalysts derived from the main group elements can facilitate biomass conversion using visible light.

Maximizing the Potential of Electrically Conductive MOFs

ConspectusElectrically conductive metal-organic frameworks (EC-MOFs) have emerged as a compelling class of materials, drawing increasing attention due to their unique properties facilitating charge transport within porous structures. The synergy between electrical conductivity and porosity has opened a wide range of applications, including electrocatalysis, energy storage, chemiresistive sensing, and electronic devices that have been underexplored for their insulating counterparts. Despite these promising prospects, a prevalent challenge arises from the predominant adoption of two-dimensional (2D) structures by most EC-MOFs. These 2D frameworks often show modest surface areas and short interlayer distances, hindering molecular accessibility, which deviates from the inherent characteristics of conventional MOFs. Furthermore, the quest for efficient charge transport imposes design constraints, leading to a restricted selection of functional building blocks. Additionally, there is a lack of established functionalization methods within EC-MOFs, limiting their functional diversity. Thus, these challenges have impeded EC-MOFs from reaching their full potential.In this Account, we summarize and discuss our group's efforts aimed at enhancing molecular accessibility and deploying the functional diversity of EC-MOFs. Our focus on enhancing molecular accessibility involves several strategies. First, we employed macrocyclic ligands with intrinsic pockets as the building blocks for EC-MOFs. The integrated intrinsic pockets in the frameworks supplement surface areas and additional pores to enhance molecular accessibility. The resulting macrocyclic ligand-based EC-MOFs exhibit exceptionally high surface areas and confer advantages in electrochemical performances. Second, our efforts extend to addressing the structural limitations, frequently associated with EC-MOFs' 2D structures. Through the pillar insertion strategy, we transformed a 2D EC-MOF platform into a three-dimensional (3D) structure, thereby achieving higher porosity and enhanced molecular accessibility. In pursuing functional diversity, we have delved into molecular-level tuning of EC-MOF building blocks. We demonstrated that electron-rich alkyne-based pockets in the macrocyclic ligands can host transition metals and alkali ions, enabling ion selectivity and showcasing diverse use of EC-MOFs. We utilized a postsynthetic approach to further functionalize metal nodes on the molecular level within an EC-MOF framework, introducing a proton-conducting pathway while preserving its electrical conductivity.We aspire for this Account to provide practical insights and strategies to surmount structural and functional diversity limitations in the realm of EC-MOFs. By integrating enhanced molecular accessibility and diverse functionality, our endeavor to propel the utility of these materials will inspire further rational development for future EC-MOFs and unlock their full potential.

Aluminum ion intercalation in mesoporous multilayer carbocatalysts promotes the conversion of glucose to 5-hydroxymethylfurfural

In this study, an efficient modification strategy was proposed by facile loading of trace aluminum ions and p-toluene sulfonic acid (p-TSA) in carbon materials to improve their catalytic activity. p-TSA is then proven to regulate the carbonization process and promote the formation of mesoporous and multilayer structures. The hexa-coordinated aluminum structure is characterized by 1H-27Al solid-state nuclear magnetic resonance (SSNMR) and X-ray photoelectron spectroscopy, which serves as the Lewis-Brønsted acid site in carbocatalysts. Accordingly, the resulting catalyst facilitates a yield of ∼70% for converting glucose to 5-hydroxymethylfurfural (HMF) with a maximum carbon balance of around 91.4% at 150 °C in 6 h. In situ NMR, electrospray ionization mass spectrometry and isotope labeling analysis reveal that the hexa-coordinated aluminum sites promote the isomerization of glucose, and the sulfonic groups facilitate the subsequent dehydration and rehydration of fructose and levoglucosan intermediates. Kinetic models further indicate the decreased energy barrier for glucose conversion over the Al3+/p-TSA intercalated carbocatalyst. This work provides a promising strategy for engineering waste-derived carbocatalysts toward effectively converting carbohydrates to precursors of biofuels and bioplastics.

Combined Experimental and Theoretical Study of the Synthesis of 5,7-Dihydroxy-4-methylcoumarin via a Pechmann Condensation in the Presence of UiO-66-SO3H Catalysts

An efficient synthesis of 5,7-dihydroxy-4-methylcoumarin from phloroglucinol with ethyl acetoacetate in the UiO-66-SO3H metal-organic framework is reported. The potential of UiO-66-SO3H as a solid catalyst was determined through optimized-condition experiments and quantum molecular calculations. The optimal conditions for the synthesis of 5,7-dihydroxy-4-methylcoumarin with UiO-66-SO3H were as follows: phloroglucinol/ethyl acetoacetate molar ratio = 1:1.6, reaction time = 4 h, and temperature = 140 °C, for which the reaction yield reached 66.0%. The reusability of UiO-66-SO3H catalysts for Pechmann condensation was examined. The activation energy of the reaction occurring on a sulfonic group of the UiO-66-SO3H catalyst was 12.6 kcal/mol, which was significantly lower than 22.6 kcal/mol of the same reaction on the UiO-66 catalyst. To comprehend the reaction mechanism, density functional theory with the ONIOM approach was applied for the synthesis of coumarin on the UiO-66-SO3H and UiO-66 clusters. A possible reaction mechanism was proposed involving three steps: a trans-esterification step, an intramolecular hydroxyalkylation step, and a dehydration step. The rate-determining step was suggested to be the first step which acquired an activation energy of 15.7 and 29.5 kcal/mol, respectively. Information from this study can be used as guidelines to develop more efficient catalytic metal-organic frameworks for various organic syntheses.

Controlled synthesis of Ru-single-atoms on ordered mesoporous phosphine polymers for microwave-assisted conversion of biomass-derived sugars to artificial sweeteners

Atomically dispersed metal-single-atoms have become a frontier in solid catalysis due to their characteristic electronic properties. However, for biomass conversion, employing metal-single-atoms as catalysts is rather challenging since they suffer from poor selectivity and yield due to inadequate metal-support interactions. We show here that Ru/triphenylphosphine (PPh)-based ordered mesoporous polymers afford high yields of reduced sugars, xylitol (yield ∼95%) and sorbitol (yield ∼65%) in a microwave reactor with formic acid as the only hydrogen donor. We have established a unique relationship within Ru/triphenylphosphine that shows an important ligand effect, in contrast to, Ru/triphenylamine and Ru/catechol. The tailored electronic properties in Ru/phosphine were thoroughly examined by using state-of-the-art experimental techniques viz. EXAFS, XANES, XPS, DRIFTS and HAADF-STEM. The resulting phosphine-modified catalysts show a promotion in activity and selectivity towards less vulnerable aldehydes for hydrogenation, further confirmed by DFT calculations. This finding reveals a new protocol to tailor the activity of metal-single-atoms utilizing functional porous polymers as nanoreactors.

Recent Advances in the Brønsted/Lewis Acid Catalyzed Conversion of Glucose to HMF and Lactic Acid: Pathways toward Bio-Based Plastics

One of the most trending topics in catalysis recently is the use of renewable sources and/or non-waste technologies to generate products with high added value. That is why, the present review resumes the advances in catalyst design for biomass chemical valorization. The variety of involved reactions and functionality of obtained molecules requires the use of multifunctional catalyst able to increase the efficiency and selectivity of the selected process. The use of glucose as platform molecule is proposed here and its use as starting point for biobased plastics production is revised with special attention paid to the proposed tandem Bronsted/Lewis acid catalysts.

Zn(II)/Cd(II)-Based Metal-Organic Frameworks as Bifunctional Materials for Dye Scavenging and Catalysis of Fructose/Glucose to 5-Hydroxymethylfurfural

Functional neutral metal-organic frameworks (MOFs) {[M(5OH-IP)(L)]}_n [M = Zn(II) for ADES-4; Cd(II) for ADES-5; 5OH-IP = 5-hydroxyisophthalate; L = (E)-N'-(pyridin-3-ylmethylene)nicotinohydrazide) have been synthesized by a diffusion/conventional reflux/mechanochemical method and characterized by various analytical techniques. Crystals were harvested by a diffusion method, and single-crystal X-ray diffraction (SXRD) analysis revealed that an adjacent [M₂(COO)₂]_n ladder chain generates isostructural two-dimensional network motifs by doubly pillaring via L. The bulk-phase purity of ADES-4 and ADES-5 synthesized by a versatile synthetic approach has been recognized by the decent match of powder X-ray diffraction patterns with the simulated one. Both ADES-4 and ADES-5 showed selective adsorption of cationic dyes methylene blue (MB), methyl violet (MV), and rhodamine B (RhB) over anionic dye methyl orange (MO) from water with good uptake and rapid adsorption. Utilization of ADES-4 as a chromatographic column filler for adsorptive removal of individual cationic dyes as well as a mixture of dyes has been demonstrated from the aqueous phase. Interestingly, ADES-4 is reusable with good stability, and it showed a dye desorption phenomenon in methanol. The probable mechanism of cationic dye removal based on insight from structural information and plausible supramolecular interactions has also been explored. Both MOFs also showed efficient catalytic transformation of fructose and glucose into the high-value chemical intermediate 5-hydroxymethylfurfural of industrial significance.