Materials Engineering in Perovskite for Optimized Oxygen Evolution Electrocatalysis in Alkaline Condition

Local hydroxide ion enrichment at the inner surface of lacunaris perovskite nanotubes facilitates the oxygen evolution reaction

Numerous strategies have been devised to optimize the intrinsic activity of perovskite oxides for the oxygen evolution reaction (OER). However, conventional synthetic routes typically yield limited numbers of active sites and low mass activities. More critically, the sluggish mass transfer poses a huge challenge, particularly under high polarization conditions, which impedes the overall reaction kinetics. Herein, lacunaris La0.5Pr0.25Ba0.25Co0.8Ni0.2O3-δ nanotubes (LPBCN-NTs) were prepared via electrospinning and post-annealing, which exhibited a small overpotential of 358.8 mV at 10 mA cm-2 and a lower Tafel slope of 71.46 mV dec-1, superior to the values for the same stoichiometric LPBCN nanoparticles and solid nanofibers, state-of-the-art counterparts and commercial IrO2. Density functional theory calculations revealed that the surface oxygen vacancies in LPBCN-NTs significantly lowered the OH- adsorption energy, while finite element analysis indicated that the precisely constructed lacunaris NT structure enriched the OH- concentration at its inner surface by an order of magnitude, both of which collectively resulted in accelerated OER kinetics. This study clarifies the underlying mechanism of how the lacunaris nanotubular architecture and the surface oxygen vacancies of perovskite oxides affect heterocatalysis, which undoubtedly paves the way to handling the long-standing issues of sluggish mass transfer rates and poor intrinsic catalytic activity.

Perovskite Oxides Toward Oxygen Evolution Reaction: Intellectual Design Strategies, Properties and Perspectives

Developing electrochemical energy storage and conversion devices (e.g., water splitting, regenerative fuel cells and rechargeable metal-air batteries) driven by intermittent renewable energy sources holds a great potential to facilitate global energy transition and alleviate the associated environmental issues. However, the involved kinetically sluggish oxygen evolution reaction (OER) severely limits the entire reaction efficiency, thus designing high-performance materials toward efficient OER is of prime significance to remove this obstacle. Among various materials, cost-effective perovskite oxides have drawn particular attention due to their desirable catalytic activity, excellent stability and large reserves. To date, substantial efforts have been dedicated with varying degrees of success to promoting OER on perovskite oxides, which have generated multiple reviews from various perspectives, e.g., electronic structure modulation and heteroatom doping and various applications. Nonetheless, the reviews that comprehensively and systematically focus on the latest intellectual design strategies of perovskite oxides toward efficient OER are quite limited. To bridge the gap, this review thus emphatically concentrates on this very topic with broader coverages, more comparative discussions and deeper insights into the synthetic modulation, doping, surface engineering, structure mutation and hybrids. More specifically, this review elucidates, in details, the underlying causality between the being-tuned physiochemical properties [e.g., electronic structure, metal-oxygen (M-O) bonding configuration, adsorption capacity of oxygenated species and electrical conductivity] of the intellectually designed perovskite oxides and the resulting OER performances, coupled with perspectives and potential challenges on future research. It is our sincere hope for this review to provide the scientific community with more insights for developing advanced perovskite oxides with high OER catalytic efficiency and further stimulate more exciting applications.

Graphical Abstract

Perovskites with Enriched Oxygen Vacancies as a Family of Electrocatalysts for Efficient Nitrate Reduction to Ammonia

Electrochemical nitrate reduction to ammonia (NRA) provides an efficient, sustainable approach to convert the nitrate pollutants into value-added products, which is regarded as a promising alternative to the industrial Haber-Bosch process. Recent studies have shown that oxygen vacancies of oxide catalysts can adjust the adsorption energies of intermediates and affect their catalytic performance. Compared with other metal oxides, perovskite oxides can allow their metal cations to exist in abnormal or mixed valence states, thereby resulting in enriched oxygen vacancies in their crystal structures. Here, the catalytic activities of perovskite oxides toward NRA catalysis with respect to the amount of oxygen vacancies are explored, where four perovskite oxides with different crystal structures (including cubic LaCrO₃ , orthorhombic LaMnO₃ and LaFeO₃ , hexagonal LaCoO₃ ) are chosen and investigated. By combining X-ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy and electrochemical measurements, it is found that the amount of oxygen vacancies in these perovskite oxides surprisingly follow the same order as their activities toward NRA catalysis (LaCrO₃  < LaMnO₃  < LaFeO₃  < LaCoO₃ ). Further theoretical studies reveal that the existence of oxygen vacancies in LaCoO₃ perovskite can decrease the energy barriers for reduction of *HNO₃ to *NO₂ , leading to its superior NRA performance.

Rapidly reconstructing the active surface of cobalt-based perovskites for alkaline seawater splitting

As a potential oxygen evolution reaction (OER) catalyst, Co-based perovskites have received intensive attention. However, Sr readily accumulates on their surface, and makes them inert toward the OER. Herein, we propose a simple but versatile electrochemical reduction method to reconstruct the active surface of Co-based perovskites within a few seconds. By this method, Sr rapidly precipitates from Co-based perovskites, accompanied by the introduction of Sr and oxygen vacancies. After reconstruction, the electrochemical active surface areas of Co-based perovskites greatly increase, and the OER overpotential of the optimized SrNb_0.1Co_0.7Fe_0.2O_3-δ (ER-SNCF-20s) reaches 278 mV at 10 mA cm^-2. This can be explained by the decrease of overpotentials at the rate-determining step. Using ER-SNCF-20s, the splitting voltage of alkaline natural seawater can reach 1.56 V at 10 mA cm^-2, and remains steady for 300 h. This effort offers a feasible method for reconstructing the active surface of Co-based perovskites.

Deep Eutectic Solvent Synthesis of Perovskite Electrocatalysts for Water Oxidation

Oxide perovskites have attracted great interest as materials for energy conversion due to their stability and structural tunability. La-based perovskites of 3d-transition metals have demonstrated excellent activities as electrocatalysts in water oxidation. Herein, we report the synthesis route to La-based perovskites using an environmentally friendly deep eutectic solvent (DES) consisting of choline chloride and malonic acid. The DES route affords phase-pure crystalline materials on a gram scale and results in perovskites with high electrocatalytic activity for oxygen evolution reaction. A convenient, fast, and scalable synthesis proceeds via assisted metathesis at a lower temperature as compared to traditional solid-state methods. Among LaCoO3, LaMn0.5Ni0.5O3, and LaMnO3 perovskites prepared via the DES route, LaCoO3 was established to be the best-performing electrocatalyst for water oxidation in alkaline medium at 0.25 mg cm-2 mass loading. LaCoO3 exhibits current densities of 10, 50, and 100 mA cm-2 at respective overpotentials of approximately 390, 430, and 470 mV, respectively, and features a Tafel slope of 55.8 mV dec-1. The high activity of LaCoO3 as compared to the other prepared perovskites is attributed to the high concentration of oxygen vacancies in the LaCoO3 lattice, as observed by high-resolution transmission electron microscopy. An intrinsically high concentration of O vacancies in the LaCoO3 synthesized via the DES route is ascribed to the reducing atmosphere attained upon thermal decomposition of the DES components. These findings will contribute to the preparation of highly active perovskites for various energy applications.

The Pivotal Role of s-, p-, and f-Block Metals in Water Electrolysis: Status Quo and Perspectives

Transition metals, in particular noble metals, are the most common species in metal-mediated water electrolysis because they serve as highly active catalytic sites. In many cases, the presence of nontransition metals, that is, s-, p-, and f-block metals with high natural abundance in the earth-crust in the catalytic material is indispensable to boost efficiency and durability in water electrolysis. This is why alkali metals, alkaline-earth metals, rare-earth metals, lean metals, and metalloids receive growing interest in this research area. In spite of the pivotal role of these nontransition metals in tuning efficiency of water electrolysis, there is far more room for developments toward a knowledge-based catalyst design. In this review, five classes of nontransition metals species which are successfully utilized in water electrolysis, with special emphasis on electronic structure-catalytic activity relationships and phase stability, are discussed. Moreover, specific fundamental aspects on electrocatalysts for water electrolysis as well as a perspective on this research field are also addressed in this account. It is anticipated that this review can trigger a broader interest in using s-, p-, and f-block metals species toward the discovery of advanced polymetal-containing electrocatalysts for practical water splitting.

New Undisputed Evidence and Strategy for Enhanced Lattice-Oxygen Participation of Perovskite Electrocatalyst through Cation Deficiency Manipulation

Oxygen evolution reaction (OER) is a key half-reaction in many electrochemical transformations, and efficient electrocatalysts are critical to improve its kinetics which is typically sluggish due to its multielectron-transfer nature. Perovskite oxides are a popular category of OER catalysts, while their activity remains insufficient under the conventional adsorbate evolution reaction scheme where scaling relations limit activity enhancement. The lattice oxygen-mediated mechanism (LOM) has been recently reported to overcome such scaling relations and boost the OER catalysis over several doped perovskite catalysts. However, direct evidence supporting the LOM participation is still very little because the doping strategy applied would introduce additional active sites that may mask the real reaction mechanism. Herein, a dopant-free, cation deficiency manipulation strategy to tailor the bulk diffusion properties of perovskites without affecting their surface properties is reported, providing a perfect platform for studying the contribution of LOM to OER catalysis. Further optimizing the A-site deficiency achieves a perovskite candidate with excellent intrinsic OER activity, which also demonstrates outstanding performance in rechargeable Zn-air batteries and water electrolyzers. These findings not only corroborate the key role of LOM in OER electrocatalysis, but also provide an effective way for the rational design of better catalyst materials for clean energy technologies.

Regulating the Interfacial Electron Density of La0.8Sr0.2Mn0.5Co0.5O3/RuOx for Efficient and Low-Cost Bifunctional Oxygen Electrocatalysts and Rechargeable Zn-Air Batteries

La_0.8Sr_0.2Mn_0.5Co_0.5O₃ (LSMC) perovskite anchored with RuO_x (LSMC-Ru) is fabricated as a new bifunctional electrocatalyst, with low dosage (2.43 wt %) and high utilization of noble metal Ru. The LSMC-Ru exhibits outstanding bifunctional activity with a low potential gap of 0.72 V between the oxygen evolution reaction (OER) potential at 10 mA cm^-2 and the oxygen reduction reaction (ORR) half-wave potential. The strong electronic interaction between RuO_x and LSMC is confirmed by both experiments and theoretical calculations. Consequently, the electron-rich Mn centers promote ORR, while the electron-deficient Ru centers facilitate OER. A Zn-air battery using the LSMC-Ru air electrode delivers a peak power density of 159 mW cm^-2 and a low charge-discharge potential gap of 0.58 V at 2 mA cm^-2. The high round-trip energy efficiency of 60.6% is retained after 300 cycles. This strategy of anchoring a low dosage noble metal catalyst to perovskite can be extended to other systems of noble metal-non-noble metal composite electrocatalysts to achieve both competitive performance and low cost.

Structural Variations of Metal Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Electrocatalytic oxygen evolution reaction (OER), an important electrode reaction in electrocatalytic and photoelectrochemical cells for a carbon-free energy cycle, has attracted considerable attention in the last few years. Metal oxides have been considered as good candidates for electrocatalytic OER because they can be easily synthesized and are relatively stable during the OER process. However, inevitable structural variations still occur to them due to the complex reaction steps and harsh working conditions of OER, thus impending the further insight into the catalytic mechanism and rational design of highly efficient electrocatalysts. The aim of this review is to disclose the current research progress toward the structural variations of metal oxide-based OER electrocatalysts. The origin of structural variations of metal oxides is discussed. Based on some typical oxides performing OER activity, the external and internal factors that influence the structural stability are summarized and then some general approaches to regulate the structural variation process are provided. Some operando methods are also concluded to monitor the structural variation processes and to identify the final active structure. Additionally, the unresolved problems and challenges are presented in an attempt to get further insight into the mechanism of structural variations and establish a rational structure-catalysis relationship.

High-Performance Perovskite Composite Electrocatalysts Enabled by Controllable Interface Engineering

Single-phase perovskite oxides that contain nonprecious metals have long been pursued as candidates for catalyzing the oxygen evolution reaction, but their catalytic activity cannot meet the requirements for practical electrochemical energy conversion technologies. Here a cation deficiency-promoted phase separation strategy to design perovskite-based composites with significantly enhanced water oxidation kinetics compared to single-phase counterparts is reported. These composites, self-assembled from perovskite precursors, comprise strongly interacting perovskite and related phases, whose structure, composition, and concentration can be accurately controlled by tailoring the stoichiometry of the precursors. The composite catalyst with optimized phase composition and concentration outperforms known perovskite oxide systems and state-of-the-art catalysts by 1-3 orders of magnitude. It is further demonstrated that the strong interfacial interaction of the composite catalysts plays a key role in promoting oxygen ionic transport to boost the lattice-oxygen participated water oxidation. These results suggest a simple and viable approach to developing high-performance, perovskite-based composite catalysts for electrochemical energy conversion.

Precursor accumulation on nanocarbons for the synthesis of LaCoO3 nanoparticles as electrocatalysts for oxygen evolution reaction

Oxygen evolution reaction (OER) is a key step in energy storage devices. Lanthanum cobaltite (LaCoO₃) perovskite is an active catalyst for OER in alkaline solutions, and it is expected to be a low-cost alternative to the state-of-the-art catalysts (IrO₂ and RuO₂) because transition metals are abundant and inexpensive. For efficient catalysis with LaCoO₃, nanosized LaCoO₃ with a high surface area is desirable for increasing the number of catalytically active sites. In this study, we developed a novel synthetic route for LaCoO₃ nanoparticles by accumulating the precursor molecules over nanocarbons. This precursor accumulation (PA) method for LaCoO₃ nanoparticle synthesis is simple and involves the following steps: (1) a commercially available carbon powder is soaked in a solution of the nitrate salts of lanthanum and cobalt and (2) the sample is dried and calcined in air. The LaCoO₃ nanoparticles prepared by the PA method have a high specific surface area (12 m² g⁻¹), comparable to that of conventional LaCoO₃ nanoparticles. The morphology of the LaCoO₃ nanoparticles is affected by the nanocarbon type, and LaCoO₃ nanoparticles with diameters of less than 100 nm were obtained when carbon black (Ketjen black) was used as the support. Further, the sulfur impurities in nanocarbons significantly influence the formation of the perovskite structure. The prepared LaCoO₃ nanoparticles show excellent OER activity owing to their high surface area and perovskite structure. The Tafel slope of these LaCoO₃ nanoparticles is as low as that of the previously reported active LaCoO₃ catalyst. The results strongly suggest that the PA method provides nanosized LaCoO₃ without requiring the precise control of chemical reactions, harsh conditions, and/or special apparatus, indicating that it is promising for producing active OER catalysts at a large scale.

A simple synthetic process for LaCoO₃ nanoparticles based on the accumulation of precursors on nanocarbon supports was presented. The LaCoO₃ nanoparticles showed excellent OER activity owing to their high surface area and perovskite structure.

Borate Anion Dopant Inducing Oxygen Vacancies over Co3O4 Nanocages for Enhanced Oxygen Evolution

The rational design of cost effective and highly efficient oxygen evolution reaction (OER) catalysts plays an extremely important role in promoting the commercial applications of electrochemical water splitting. Herein we reported a sacrificial template strategy for the preparation of borate anion doped Co3O4@ZIF-67 nanocages assembled with nanosheets (B-Co3O4@ZIF-67) by hydrothermal boronation of zeolitic imidazolate framework-67 (ZIF-67). During the preparation process, two different kinds of borate anion sources were found to regulate the morphological structures by tuning the etching rate between ZIF precursors and the borate anion. Moreover, borate anion doping was also found to induce oxygen vacancy defects, which is beneficial for modulating the electronic structure and accelerating electron transport. Meanwhile, the resultant B-Co3O4@ZIF-67 nanocages possess a large specific surface area, which is beneficial for the mass transfer of the electrolyte and exposing more catalytic active sites. Benefiting from the advantages above, the resultant B-Co3O4@ZIF-67 nanocages exhibit impressive OER performance with a small overpotential of 334 mV, a current density of 10 mA cm−2, a small Tafel slope of 73.88 mV dec−1, as well as long-term durability in an alkaline electrolyte.