Nanocarbon for Energy Material Applications: N2 Reduction Reaction

Recent Developments of Dual Single-Atom Catalysts for Nitrogen Reduction Reaction

Ammonia is vital for fertilizer production, hydrogen storage, and alternative fuels. The conventional Haber-Bosch process for ammonia production is energy-intensive and environmentally harmful. Designing environmentally friendly and low-energy consumption strategies for electrocatalytic N2 reduction reaction (ENRR) in mild conditions is meaningful. Single-atom catalysts (SACs) have been studied extensively for NRR due to their high atomic utilization and unique electronic structure but are limited by their poor faradic efficiency and low ammonia formation yield. Dual single-atom catalysts (DSACs) have recently emerged as a promising solution for the effective activation of molecular N2 , providing diverse active sites and synergistic interactions between adjacent atoms. In this review, we summarize the latest advances in metal DSACs for electrochemical ENRR based on both theoretical calculations and experimental studies, including aspects such as their variety, coordination, support, N2 adsorption and activity mechanisms, the characterization of NRR and electrochemical cell Configuration. We also address challenges and prospects in this rapidly evolving field, providing a comprehensive overview of DSACs for ENRR.

Electrochemical Nitrogen Fixation for Green Ammonia: Recent Progress and Challenges

Ammonia, a key feedstock used in various industries, has been considered a sustainable fuel and energy storage option. However, NH3 production via the conventional Haber-Bosch process is costly, energy-intensive, and significantly contributing to a massive carbon footprint. An electrochemical synthetic pathway for nitrogen fixation has recently gained considerable attention as NH3 can be produced through a green process without generating harmful pollutants. This review discusses the recent progress and challenges associated with the two relevant electrochemical pathways: direct and indirect nitrogen reduction reactions. The detailed mechanisms of these reactions and highlight the recent efforts to improve the catalytic performances are discussed. Finally, various promising research strategies and remaining tasks are presented to highlight future opportunities in the electrochemical nitrogen reduction reaction.

CeO2-CDs clusters decorated Co(OH)2 nanosheets for improved photocatalytic ammonia synthesis

The green synthesis process of photocatalytic ammonia production has received more and more attentions. Herein, a Z-scheme heterojunction with all-solid-state structures is constructed, in which carbon dots can act as electron transferring mediators. The photocatalytic measurement shows that the modified photocatalysts exhibit much higher activities, in which the ammonia production rates can reach above 232 µmol·g_cal^-1·h^-1 under the light irradiation. The improved catalytic properties can be credited to the significantly increased number of photoinduced oxygen vacancies, the excellent visible-light adsorption abilities and photogenerated electron-hole separation efficiencies for the carbon dots bridged heterostructures. More hydroxyl and superoxide radicals can be simultaneously produced in the composites. This work provides reasonable guidance for applications in photocatalytic ammonia synthesis and a promising construction strategy of efficient Z-scheme photocatalysts.

Advanced (photo)electrocatalytic approaches to substitute the use of fossil fuels in chemical production

Electrification of the chemical industry for carbon-neutral production requires innovative (photo)electrocatalysis. This study highlights the contribution and discusses recent research projects in this area, which are relevant case examples to explore new directions but characterised by a little background research effort. It is organised into two main sections, where selected examples of innovative directions for electrocatalysis and photoelectrocatalysis are presented. The areas discussed include (i) new approaches to green energy or H2 vectors, (ii) the production of fertilisers directly from the air, (iii) the decoupling of the anodic and cathodic reactions in electrocatalytic or photoelectrocatalytic devices, (iv) the possibilities given by tandem/paired reactions in electrocatalytic devices, including the possibility to form the same product on both cathodic and anodic sides to "double" the efficiency, and (v) exploiting electrocatalytic cells to produce green H2 from biomass. The examples offer hits to expand current areas in electrocatalysis to accelerate the transformation to fossil-free chemical production.

Coral-like Fe-doped MoO2/C heterostructures with rich oxygen vacancies for efficient electrocatalytic N2 reduction

Molybdenum (Mo) is one of the most important constituent elements in natural nitrogenase and theoretical calculation results show that Mo-based materials can be used as potential NRR electrocatalysts. The design of advanced catalysts with a special structure is very essential for promoting the development of electrocatalytic N₂ into NH₃. In this paper, Fe-doped MoO₂/C heterostructured nanoparticles with rich oxygen vacancies (Vo) are designed and they exhibit highly efficient catalytic activity for artificial N₂ fixation in neutral electrolytes under ambient conditions. The influence of the atomic ratio of the Fe source to the Mo source and the NaBH₄ ethanol solution treatment on the structure and electrocatalytic performance are systematically investigated. The Vo-Fe-MoO₂/C (1 : 50) catalyst with rich oxygen vacancies shows a satisfactory electrocatalytic N₂ reduction reaction (e-NRR) activity in 0.1 M Na₂SO₄ with a high ammonia yield rate of 15.87 ± 0.3 μg h^-1 mg^-1 at -0.5 V versus the reversible hydrogen electrode (vs. the RHE) and a FE of 13.4% at -0.3 V (vs. the RHE). According to the results of DFT calculations, the active center of the electro-catalytic nitrogen reduction reaction is the molybdenum atom between the iron atom and the O vacancy. Oxygen vacancies can not only reduce the energy barrier of the RDS but also facilitate the desorption of ammonia and the first step hydrogenation of nitrogen. The doping of Fe will change the electronic state of the Mo atom in MoO₂.

Supramolecular Hydrogels from a Tripeptide and Carbon Nano-Onions for Biological Applications

Nanocomposite hydrogels have attracted researchers' attention in recent years to achieve superior performances in a variety of materials applications. In this work, we describe the outcome of three different strategies to combine a self-assembling tripeptide and carbon nano-onions (CNOs), through covalent and non-covalent approaches, into supramolecular and nanostructured hydrogels. Importantly, the tripeptide coated the nano-onions and extended their aqueous dispersions' stability by several hours. Furthermore, CNOs could be loaded in the tripeptide hydrogels at the highest level ever reported for nanocarbons, indicating high compatibility between the components. The materials were formed in phosphate-buffered solutions, thus paving the way for biological applications, and were characterized by several spectroscopic, microscopic, thermogravimetric, and rheological techniques. In vitro experiments demonstrated excellent cytocompatibility.

Catalysis for e-Chemistry: Need and Gaps for a Future De-Fossilized Chemical Production, with Focus on the Role of Complex (Direct) Syntheses by Electrocatalysis

The prospects, needs and limits in current approaches in catalysis to accelerate the transition to e-chemistry, where this term indicates a fossil fuel-free chemical production, are discussed. It is suggested that e-chemistry is a necessary element of the transformation to meet the targets of net zero emissions by year 2050 and that this conversion from the current petrochemistry is feasible. However, the acceleration of the development of catalytic technologies based on the use of renewable energy sources (indicated as reactive catalysis) is necessary, evidencing that these are part of a system of changes and thus should be assessed from this perspective. However, it is perceived that the current studies in the area are not properly addressing the needs to develop the catalytic technologies required for e-chemistry, presenting a series of relevant aspects and directions in which research should be focused to develop the framework system transformation necessary to implement e-chemistry.

Progress in Mo/W-based electrocatalysts for nitrogen reduction to ammonia under ambient conditions

Ammonia (NH₃), possessing high hydrogen content and energy density, has been widely employed for fertilizers and value-added chemicals in green energy carriers and fuels. However, the current NH₃ synthesis largely depends on the traditional Haber-Bosch process, which needs tremendous energy consumption and generates greenhouse gas, resulting in severe energy and environmental issues. The electrochemical strategy of converting N₂ to NH₃ under mild conditions is a potentially promising route to realize an environmentally friendly concept. Among various catalysts, molybdenum/tungsten-based electrocatalysts have been widely used in electrochemical catalytic and energy conversion. This review describes the latest progress of molybdenum/tungsten-based electrocatalysts for the electrochemical nitrogen reduction reaction. The fundamental roles of morphology, doping, defects, heterojunction, and coupling regulation in improving electrocatalytic performance are mainly discussed. Besides, some tailoring strategies for enhancing the conversion efficiency of N₂ to NH₃ over Mo/W-based electrocatalysts are also summarized. Finally, the existing challenges and limitations of N₂ fixation are proposed, as well as possible future perspectives, which will provide a platform for further development of advanced Mo/W-based N₂ reduction systems.