Pathways towards Boosting Solar-Driven Hydrogen Evolution of Conjugated Polymers

Enhanced photocatalytic performance in seawater of donor-acceptor type conjugated polymers through introduction of alkoxy groups in the side chain

Previous studies have demonstrated that the donor (D)-acceptor (A) structure enables conjugated polymers (CPs) to effectively inhibit charge recombination, reduce exciton binding energy to a minimum, and broaden the light absorption spectrum, ultimately enhancing photocatalytic activity. Besides, side chain engineering is an effective approach to enhance photocatalytic performance by regulating surface chemistry and energy band structure of CPs. Herein, three D-A type CPs, namely TPD-T, TPD-MOT and TPD-DOT, were designed and synthesized using thieno[3,4-c]pyrrole-4,6-dione (TPD) as A units and thiophene with different alkyl/alkoxy groups side chain (as 3-octylthiophene (T), 3-methoxythiophene (MOT) and 3,4-ethylenedioxythiophene (DOT)) as D units, via an atom- and step-economic CH/CH cross-coupling polycondensation. The photocatalytic hydrogen production performance of these polymers driven by visible light was systematically evaluated in pure water and natural seawater. The results show that the hydrogen evolution rates (HERs) of the as-synthesized CPs in pure water and natural seawater significantly increased by 5 and 7 times, respectively, when the number of alkoxy groups on the side chain of polymers increased from 0 to 2. In particular, HERs of three polymers in natural seawater are distinctly better than that in pure water. Further, the steady-state photoluminescence (PL), time-resolved fluorescence decay, and electrochemical impedance spectroscopy (EIS) studies combined with density functional theory (DFT) simulations were carried out to figure out the possible mechanism of the enhanced photocatalytic performance of CPs by side chain engineering. This work indicates that side chain engineering contributes significantly to determine the photocatalytic activity of D-A polymers-based photocatalysts, and could serve as guidelines for organic photocatalysts with highly efficient hydrogen evolution performance.

Vapor-Solid Interface Synthesis of Highly Crystalline Covalent Triazine Frameworks for Use as Efficient Photocatalysts

Harsh synthetic conditions for crystalline covalent triazine frameworks (CTFs) and associated limitations on structural diversities impede not only further development of functional CTFs, but also practical large-scale synthesis. Herein, a mild and universal vapor-solid interface synthesis strategy is developed for highly crystalline CTFs employing trifluoromethanesulfonic acid vapor as catalysts. A series of highly ordered simple and functional CTFs (CTF-TJUs) can be facilely produced. In particular, the porphyrin-involved functional CTF (CTF-TJU-Por1) with high crystallinity is synthesized for the first time via this universal approach. The mechanism of vapor-catalyzed trimerization of nitrile monomers is thoroughly investigated through semi in situ characterizations. As a proof of concept, the photocatalytic performance of synthesized CTFs for water splitting is evaluated. CTF-TJU-133 exhibits significantly greater photocatalytic rates for hydrogen (4.35 µmol h-1) and oxygen (2.18 µmol h-1) evolutions during overall water splitting under visible light irradiations compared to other CTF-TJUs, representing one of the highest values among reported CTF photocatalysts. Further studies reveal that enhanced photocatalytic performance of CTF-TJU-133 results from optimized band structure, extended visible-light absorption, and high carrier separation efficiency. This study provides a promising strategy to synthesize various simple and functional CTFs, which significantly enriched diversities of CTF family for different application purposes.

Constructing N-Containing Poly(p-Phenylene) (PPP) Films Through A Cathodic-Dehalogenation Polymerization Method

Developing the films of N-containing unsubstituted poly(p-phenylene) (PPP) films for diverse applications is significant and highly desirable because the replacement of sp2 C atoms with sp2 N atoms will bring novel properties to the as-prepared polymers. In this research, an electrochemical-dehalogenation polymerization strategy is employed to construct two N-containing PPP films under constant potentials, where 2,5-diiodopyridine (DIPy) and 2,5-dibromopyrazine (DBPz) are used as starting agents. The corresponding polymers are named CityU-23 (for polypyridine) and CityU-24 (for polypyrazine). Moreover, it is found that both polymers can form films in situ on different conductive substrates (i.e., silicon, gold, ITO, and nickel), satisfying potential device fabrication. Furthermore, the as-obtained thin films of CityU-23 and CityU-24 exhibit good performance of alkaline hydrogen evolution reaction with the overpotential of 212.8 and 180.7 mV and the Tafel slope of 157.0 and 122.4 mV dec-1, respectively.

Processing polymer photocatalysts for photocatalytic hydrogen evolution

Conjugated materials have emerged as competitive photocatalysts for the production of sustainable hydrogen from water over the last decade. Interest in these polymer photocatalysts stems from the relative ease to tune their electronic properties through molecular engineering, and their potentially low cost. However, most polymer photocatalysts have only been utilised in rudimentary suspension-based photocatalytic reactors, which are not scalable as these systems can suffer from significant optical losses and often require constant agitation to maintain the suspension. Here, we will explore research performed to utilise polymeric photocatalysts in more sophisticated systems, such as films or as nanoparticulate suspensions, which can enhance photocatalytic performance or act as a demonstration of how the polymer can be scaled for real-world applications. We will also discuss how the systems were prepared and consider both the benefits and drawbacks of each system before concluding with an outlook on the field of processable polymer photocatalysts.

Dual Function of Naphthalenediimide Supramolecular Photocatalyst with Giant Internal Electric Field for Efficient Hydrogen and Oxygen Evolution

Organic supramolecular photocatalysts have garnered widespread attention due to their adjustable structure and exceptional photocatalytic activity. Herein, a novel bis-dicarboxyphenyl-substituent naphthalenediimide self-assembly supramolecular photocatalyst (SA-NDI-BCOOH) with efficient dual-functional photocatalytic performance is successfully constructed. The large molecular dipole moment and short-range ordered stacking structure of SA-NDI-BCOOH synergistically create a giant internal electric field (IEF), resulting in a remarkable 6.7-fold increase in its charge separation efficiency. Additionally, the tetracarboxylic structure of SA-NDI-BCOOH greatly enhances its hydrophilicity. Thus, SA-NDI-BCOOH demonstrates efficient dual-functional activity for photocatalytic hydrogen and oxygen evolution, with rates of 372.8 and 3.8 µmol h-1, respectively. Meanwhile, a notable apparent quantum efficiency of 10.86% at 400 nm for hydrogen evolution is achieved, prominently surpassing many reported supramolecular photocatalysts. More importantly, with the help of dual co-catalysts, it exhibits photocatalytic overall water splitting activity with H2 and O2 evolution rates of 3.2 and 1.6 µmol h-1. Briefly, this work sheds light on enhancing the IEF by controlling the molecular polarity and stacking structure to dramatically improve the photocatalytic performance of supramolecular materials.

An All-In-One Integrating Strategy for Designing Platinum(II)-Based Supramolecular Polymers for Photocatalytic Hydrogen Evolution

Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.

Enhancing Built-in Electric Fields via Molecular Symmetry Modulation in Supramolecular Photocatalysts for Highly Efficient Photocatalytic Hydrogen Evolution

Nature-inspired supramolecular self-assemblies are attractive photocatalysts, but their quantum yields are limited by poor charge separation and transportation. A promising strategy for efficient charge transfer is to enhance the built-in electric field by symmetry breaking. Herein, an unsymmetric protonation, N-heterocyclic π-conjugated anthrazoline-based supramolecular photocatalyst SA-DADK-H+ was developed. The unsymmetric protonation breaks the initial structural symmetry of DADK, resulting in ca. 50-fold increase in the molecular dipole, and facilitates efficient charge separation and transfer within SA-DADK-H+. The protonation process also creates numerous active sites for H2O adsorption, and serves as crucial proton relays, significantly improving the photocatalytic efficiency. Remarkably, SA-DADK-H+ exhibits an outstanding hydrogen evolution rate of 278.2 mmol g-1 h-1 and a remarkable apparent quantum efficiency of 25.1 % at 450 nm, placing it among the state-of-the-art performances in organic semiconductor photocatalysts. Furthermore, the versatility of the unsymmetric protonation approach has been successfully applied to four other photocatalysts, enhancing their photocatalytic performance by 39 to 533 times. These findings highlight the considerable potential of unsymmetric protonation induced symmetry breaking strategy in tailoring supramolecular photocatalysts for efficient solar-to-fuel production.

Nickel-Doped Decatungstate as a Robust Photocatalyst for Violet Light-Triggered Redox Coupling Conversion of Alcohol and Water to Aldehyde/Ketone and Hydrogen

The effective coupling of photoinduced alcohol oxidation and water reduction may economically produce hydrogen (H2) from water, which is of great significance in solving the current energy crisis. This study discloses that decatungstate (DT) and especially Ni2+ions-doped DTs are active for the photoreaction of benzyl alcohol with H2O, and under 48 h of violet light illumination, the best 1%Ni-DT yields ca. 86.1% benzoic acid and a 4.65 h-1 H2 generation efficiency (turnover frequency, TOF). Also, 1%Ni-DT is efficient for the photoredox coupling reaction of aliphatic and especially aromatic primary/secondary alcohols with water. A series of characterizations support that the doubled-reduced H2DT produced from the photoreaction plays a key role in water reduction to H2, which is accelerated by the doped Ni2+. In particular, it and the derived Ni3+ may construct a Z-type catalyst for water overall splitting, thereby hoisting the acid yield and H2 amount in the later stage of the photoreaction.

Robust cooperative of cadmium sulfide with highly ordered hollow microstructure coordination polymers for regulating the photocatalytic performance

Accurately controlling and achieving selective reactivity at difficult-to-access reaction sites in organic molecules is challenging owing to the similar local and electronic environments of multiple reaction sites. In this work, we regulated multiple reaction sites in a highly selective and active manner using cobalt coordination polymers (Co-CP) 1 and 1a with various particle sizes and morphologies ranging from large granular to ordered hollow hemispheres by introducing sodium dodecyl sulfate (SDS) as a surfactant. The size and morphology of the catalysts could be tuned by controlling the amount of SDS. An SDS concentration of 0.03 mmol generated 1a having a highly ordered hollow hemispherical microstructure with a well-defined platform as a pre-made building unit. Cadmium sulfide (CdS), as a typical photocatalyst, was subsequently uniformly anchored in-situ on the premade building unit 1a to produce CdS@1a composites, that inherited the originally ordered hollow hemispherical microstructure while integrating CdS as well-dispersed catalytic active sites. Furthermore, the well-established CdS@1a composites were used as photocatalysts in selective oxidation reactions under air atmosphere with blue irradiation. The CdS0.109@1a composite with unique structural characteristics, including uniformly distributed and easily accessible catalytic sites and excellent photoelectrochemical performance, served as a highly efficient heterogeneous photocatalyst for promoting the selective oxidation of sulfides to sulfoxides as the sole products. This work presents an approach for fabricating CPs as premade building units that function as well-defined platforms for integration with photocatalysts, enabling tuning of the structure-selectivity-activity relationships.

Rational design of triazine-based conjugated polymers with enhanced charge separation ability for photocatalytic hydrogen evolution

Triazine-based conjugated polymers (TCPs) are promising organic catalysts for green H2 production, since their photocatalytic performance can be easily regulated via appropriate molecular design. However, apart from weak absorption of visible light, weak charge separation and transport abilities also considerably restrict the photocatalytic performance of TCPs. Herein, we report two novel TCP photocatalysts with donor-acceptor (D-A) and donor-π-acceptor (D-π-A) structures using dibenzo[g,p]chrysene (Dc), thiophene (T), and 2,4,6-triphenyl-1,3,5-triazine (Tz) as the donor, π-spacer, and acceptor, respectively. Compared to Dc-Tz with a D-A structure, Dc-T-Tz exhibits a broader light absorption edge and more efficient charge separation and transmission due to its D-π-A structure and strong dipole effect. These properties enable Dc-T-Tz to display a prominent H2 production rate of 45.13 mmol h-1 g-1 under ultraviolet-visible (UV-Vis) light (λ > 300 nm). Therefore, Dc-T-Tz represents state-of-the-art TCP photocatalysts to date.

Blocking Accretion Enables Dimension Reduction of Metal-Organic Framework for Photocatalytic Performance

The evolution and formation process of two-dimensional metal-organic frameworks (MOFs) primarily arise from the anisotropic growth of crystals, leading to variations in photocatalytic performance. It is crucial to achieve a synergistic combination of anisotropic electron transfer direction and dimension reduction strategies. In this study, a novel approach that effectively blocks crystal growth accretion through the coordination of solvent molecules is presented, achieving the successful synthesis of impurity-free two-dimensional nanosheet Zn-PTC with exceptional hydrogen evolution reaction (HER) performance (15.4 mmol g-1  h-1 ). The structural and photophysical characterizations validate the successful prevention of crystal accretion, while establishing correlation between structural anisotropy and intrinsic charge transfer mode through transient spectroscopy. These findings unequivocally demonstrate that electron transfer along the [001] direction plays a pivotal role in the redox performance of nano-Zn-PTC. Subsequently, by coupling the photocatalytic performance and density functional theory (DFT) simulation calculations, the carrier diffusion kinetics is explored, revealing that effective dimension reduction along the ligand-to-metal charge transfer (LMCT) direction is the key to achieving superior photocatalytic performance.

Molecular Engineering in D-π-A-A-Type Conjugated Microporous Polymers for Boosting Photocatalytic Hydrogen Evolution

Conjugated microporous polymer (CMP) photocatalysts with donor-π-acceptor (D-π-A) or donor-acceptor (D-A) structures have garnered great attention for solar-driven hydrogen generation because of their inherent charge separation nature and high surface area. Herein, we design a series of D-π-A-A-type CMP photocatalysts to uncover the influence of the content of the dibenzo[b,d]thiophene-S-S-dioxide (BTDO) acceptor on the photocatalytic activity. The results demonstrate that the acceptor content in the D-π-A-A-type CMP photocatalysts affects the electronic structure, the availability of reaction sites, and the separation between light-generated electrons and holes, which mainly determine the photocatalytic performance for H₂ release. Benefiting from the synergy of light absorption, hydrophilicity, and active sites, the bare polymer PyT-BTDO-2 with an optimized BTDO content exhibits a high H₂ production rate of 230.06 mmol h^-1 g^-1 under simulated sunlight, manifesting that the strategy of D-π-A-A structural design is efficacious for boosting the photocatalytic performance of CMP photocatalysts.

Structural Regulation of Thiophene-Based Two-Dimensional Covalent Organic Frameworks toward Highly Efficient Photocatalytic Hydrogen Generation

Two imine-based 2D covalent organic frameworks (COFs) with slight differences in their core structures are presented. The COF containing benzotrithiophene moieties with better planarity and π-conjugation (BTTh-TZ-COF) shows much better photocatalytic activity than the COF with trithienylbenzene cores (TThB-TZ-COF). Further photoelectrochemical study reveals the catalytic mechanism in more detail. Since other factors such as crystallinity, porosity, and optical bandgaps are equal, the different structures of the cores in the two similar COFs are the major contributors to the significantly different photocatalytic performance. The better electron delocalization of the planar trithiophene-based core and the enhanced D-A interactions between the triazine and trithiophene units in BTTh-TZ-COF create efficient charge separation and transfer, thus leading to superior photocatalytic hydrogen evolution activity. A new strategy for preparing high-performance organic photocatalysts for solar-energy conversion is revealed by this study.

Solution-Processable Donor–Acceptor Copolymer Thin Films for Efficient Visible-Light-Driven Photocatalytic Hydrogen Evolution

Conjugated polymers (CPs) have been actively utilized as photocatalysts for hydrogen evolution due to their easy synthetic tunability to endow specific functionalities, including visible-light absorption, higher-lying LUMO energy for proton reduction, and sufficient photochemical stability. Enhancing interfacial surface and compatibility of hydrophobic CPs with hydrophilic water is the central focus to improve the hydrogen evolution rate (HER). Although a number of successful approaches have been developed in recent years, tedious chemical modifications or post-treatment of CPs make reproducibility of the materials difficult. In this work, a solution processable PBDB-T polymer is directly deposited on a glass substrate to form a thin film that is immersed in an aqueous solution to photochemically catalyze H₂ generation. The PBDB-T thin film showed a much higher hydrogen evolution rate (HER) than the typical method of using PBDB-T suspended solids due to the enhanced interfacial area with a more suitable solid-state morphology. When the thickness of the thin film is reduced to dramatically improve the utilization of the photocatalytic material, the 0.1 mg-based PBDB-T thin film exhibited an unprecedentedly high HER of 120.90 mmol h^-1 g^-1.

Linkage-Affected Donor–Acceptor Covalent Organic Frameworks for Photocatalytic Hydrogen Production

The depletion of traditional fossil energy and the resulting environmental pollution forces people to explore new energy sources. Direct use of solar energy is now a viable solution for solving these problems. Covalent organic frameworks (COFs) are a porous crystalline material; their well-defined two-dimensional or three-dimensional frameworks can ensure the orderly arrangement of photoelectric active units, giving them potential photoelectric conversion applications. The tunable structural features endow COFs many advantages in photocatalytic hydrogen production under visible light. This review comprehensively summarizes the research progress on photoelectronic donor–acceptor (D-A) COFs with tunable structure for photocatalytic hydrogen evolution and will provide a feasible guiding strategy for applying this type of COFs in photocatalytic hydrogen production.

Interface Engineering of Conjugated Polymer-Based Composites for Photocatalysis

Photocatalysis can create a green way to produce clean energy resources, degrade pollutants and achieve carbon neutrality, making the construction of efficient photocatalysts significant in solving environmental issues. Conjugated polymers (CPs) with adjustable band structures have superior light-absorption capacity and flexible morphology that facilitate contact with other components to form advanced heterojunctions. Interface engineering can strengthen the interfacial contact between the components and further enlarge the interfacial contact area, enhance light absorption, accelerate charge transfer and improve the reusability of the composites. In order to throw some new light on heterojunction interface regulation at a molecular level, herein we summarize CP-based composites with improved photocatalytic performance according to the types of interactions (covalent bonding, hydrogen bonding, electrostatic interactions, π-π stacking, and other polar interactions) between the components and introduce the corresponding interface building methods, identifying techniques. Then the roles of interfaces in different photocatalytic applications are discussed. Finally, we sum up the existing problems in interface engineering of CP-based composites and look forward to the possible solutions.

Biomimetic control of charge transfer in MOFs by solvent coordination for boosting photocatalysis

The role of the coordination solvent in MOFs with photocatalysis can't be ignored. Novel [Ni(PTCA)·sol]-MOFs with a 3D open wavy-layered structure are selected for in-depth study by imitating the internal environment of a chameleon. The results confirm that the coordination solvent can modulate the band structure and the polarity is the key to accelerate the formation of intermediate H*.

An Efficient Electron Donor for Conjugated Microporous Polymer Photocatalysts with High Photocatalytic Hydrogen Evolution Activity

Conjugated microporous polymers (CMPs) with donor-acceptor (D-A) molecular structure show high photocatalytic activity for hydrogen evolution due to the efficient light-induced electron/hole separation, which is mostly determined by the nature of electron donor and acceptor units. Therefore, the selection of electron donor and acceptor holds the key point to construct high performance polymer photocatalysts. Herein, two dibenzo[b,d]thiophene-S,S-dioxide (BTDO) containing CMP photocatalysts using tetraphenylethylene (TPE) or dibenzo[g,p]chrysene (DBC) as the electron donor to investigate the influence of the geometry of electron donor on the photocatalytic activity are design and synthesized. Compared with the twisted TPE donor, DBC has a planar molecular structure with extended π-conjugation, which promotes the charges transmission and light-induced electron/hole separation. As a result, the polymer DBC-BTDO produced from DBC donor shows a remarkable photocatalytic hydrogen evolution rate (HER) of 104.86 mmol h^-1  g^-1 under full arc light (λ > 300 nm), which is much higher than that of the polymer TPE-BTDO (1.80 mmol h^-1  g^-1 ), demonstrating that DBC can be an efficient electron donor for constructing D-A polymer photocatalysts with high photocatalytic activity for hydrogen evolution.

Graphitic Aza-Fused π-Conjugated Networks: Construction, Engineering, and Task-Specific Applications

2D π-conjugated networks linked by aza-fused units represent a pivotal category of graphitic materials with stacked nanosheet architectures. Extensive efforts have been directed at their fabrication and application since the discovery of covalent triazine frameworks (CTFs). Besides the triazine cores, tricycloquinazoline and hexaazatriphenylene linkages are further introduced to tailor the structures and properties. Diverse related materials have been developed rapidly, and a thorough outlook is necessitated to unveil the structure-property-application relationships across multiple subcategories, which is pivotal to guide the design and fabrication toward enhanced task-specific performance. Herein, the structure types and development of related materials including CTFs, covalent quinazoline networks, and hexaazatriphenylene networks, are introduced. Advanced synthetic strategies coupled with characterization techniques provide powerful tools to engineer the properties and tune the associated behaviors in corresponding applications. Case studies in the areas of gas adsorption, membrane-based separation, thermo-/electro-/photocatalysis, and energy storage are then addressed, focusing on the correlation between structure/property engineering and optimization of the corresponding performance, particularly the preferred features and strategies in each specific field. In the last section, the underlying challenges and opportunities in construction and application of this emerging and promising material category are discussed.

Identifying the roles of imine and alkyne linkages in Determining Photocatalytic Hydrogen Evolution over Thiadiazole-Based Covalent Organic Frameworks

Covalent organic framework (COF) has been emerged as an extremely promising material for photocatalytic splitting from water for hydrogen production. However, its photocatalytic performance is seriously affected by the properties...