Recent Development of Electrocatalytic CO2 Reduction Application to Energy Conversion

d-band center engineering of single Cu atom and atomic Ni clusters for enhancing electrochemical CO2 reduction to CO

The rational design of catalysts with atomic dispersion and a deep understanding of the catalytic mechanism is crucial for achieving high performance in CO2 reduction reaction (CO2RR). Herein, we present an atomically dispersed electrocatalyst with single Cu atom and atomic Ni clusters supported on N-doped mesoporous hollow carbon sphere (CuSANiAC/NMHCS) for highly efficient CO2RR. CuSANiAC/NMHCS demonstrates a remarkable CO Faradaic efficiency (FECO) exceeding 90% across a potential range of -0.6 to -1.2 V vs. reversible hydrogen electrode (RHE) and achieves its peak FECO of 98% at -0.9 V vs. RHE. Theoretical studies reveal that the electron redistribution and modulated electronic structure-notably the positive shift in d-band center of Ni 3d orbital-resulting from the combination of single Cu atom and atomic Ni clusters markedly enhance the CO2 adsorption, facilitate the formation of *COOH intermediate, and thus promote the CO production activity. This study offers fresh perspectives on fabricating atomically dispersed catalysts with superior CO2RR performance.

Ionic Liquids Modulating Local Microenvironment of Ni-Fe Binary Single Atom Catalyst for Efficient Electrochemical CO2 Reduction

The Ni and Fe dual-atom catalysts still undergo strikingly attenuation under high current density and high overpotential. To ameliorate the issue, the ionic liquids with different cations or anions are used in this work to regulate the micro-surface of nitrogen-doped carbon supported Ni and Fe dual-atom sites catalyst (NiFe-N-C) by an impregnation method. The experimental data reveals the dual function of ionic liquids, which enhances CO2 adsorption ability and modulates electronic structure, facilitating CO2 anion radical (CO2 •¯) stabilization and decreasing onset potential. The theoretical calculation results prove that the attachment of ionic liquids modulates electronic structure, reduces energy barrier of CO2 •¯ formation, and enhances overall ECR performance. Based on these merits, BMImPF6 modified NiFe-N-C (NiFe-N-C/BMImPF6) achieves the high CO faradaic efficiency of 91.9% with a CO partial current density of -120 mA cm-2 at -1.0 V. When the NiFe-N-C/BMImPF6 is assembled as cathode of Zn-CO2 battery, it delivers the highest power density of 2.61 mW cm-2 at 2.57 mA cm-2 and superior cycling stability. This work will afford a direction to modify the microenvironment of other dual-atom catalysts for high-performance CO2 electroreduction.

High-Energy Facet Engineering for Electrocatalytic Applications

The design of high-energy facets in electrocatalysts has attracted significant attention due to their potential to enhance electrocatalytic activity. In this review, the significance of high-energy facets in various electrochemical reactions are highlighted, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CRR). Their importance in various electrochemical reactions and present strategies for constructing high-energy facets are discussed, including alloying, heterostructure formation, selective etching, capping agents, and coupling with substrates. These strategies enable control over crystallographic orientation and surface morphology, fine-tuning electrocatalytic properties. This study also addresses future directions and challenges, emphasizing the need to better understand fundamental mechanisms. Overall, high-energy facets offer exciting opportunities for advancing electrocatalysis.

Coordination Confined Thermolysis Synthesis of the Ni Single Atom Catalyst on the N-Doped Commercial Carbon for the Production of Syngas

The electrochemical conversion of CO2 into controllable syngas (CO/H2) over a wide potential range is challenging. The main electrocatalysts are based on the noble metals Au (Ag) or heavy metal Pb. The development of alternative nonprecious catalysts is of paramount importance for practice. In this work, a simple coordination confined thermal pyrolysis method has been developed for the synthesis of Ni single-atom catalyst loaded onto nitrogen-doped commercial carbon. The catalyst is in the form of NiN3-C, which exhibits a high-performance electrocatalytic reduction of CO2 toward producing syngas with Faraday efficiencies of 62.28% of CO and 36.7% of H2. The Gibbs free energies of COOH* and H* on the NiN3-C structure were estimated by using density functional theory (DFT). The formation of COOH* intermediate is the speed-limiting step in the process, with ΔG COOH* being 0.7 eV, while H* is the speed-limiting step in the hydrogen evolution, respectively. This work provides a feasible method for the achievement of nonprecious catalysts for the resourceful use of CO2.

Stability Issues in Electrochemical CO2 Reduction: Recent Advances in Fundamental Understanding and Design Strategies

Electrochemical CO2 reduction reaction (CO2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities.

Performance and Stability of Aemion and Aemion+ Membranes in Zero-Gap CO2 Electrolyzers with Mild Anolyte Solutions

The dependence of performance and stability of a zero-gap CO2 electrolyzer on the properties of the anion exchange membrane (AEM) is examined. This work firstly assesses the influence of the anolyte when using an Aemion membrane and then shows that when using 10 mM KHCO3 , a CO2 electrolyzer using a next-generation Aemion+ membrane can achieve lower cell voltages and longer lifetimes due to increased water permeation. The impact of lower permselectivity of Aemion+ on water transport is also discussed. Using Aemion+, a cell voltage of 3.17 V at 200 mA cm-2 is achieved at room temperature, with a faradaic efficiency of >90 %. Stable CO2 electrolysis at 100 mA cm-2 is demonstrated for 100 h, but with reduced lifetime at 300 mA cm-2 . However, the lifetime of the cell at high current densities is shown to be increased by improving water transport characteristics of the AEM and reducing dimensional swelling, as well as by improving cathode design to reduce localized dehydration of the membrane.

High Selectivity Fuel from Efficient CO2 Conversion by Zn-Modified rGO and Amine-Functionalized CuO as a Photocatalyst

Reduced graphene oxide (rGO) has been used in copper (II) oxide (CuO)-based photocatalysts as an additive material. An application of this CuO-based photocatalyst is in the CO₂ reduction process. The preparation of rGO by a Zn-modified Hummers' method has resulted in a high quality of rGO in terms of excellent crystallinity and morphology. However, implementing Zn-modified rGO in CuO-based photocatalysts for the CO₂ reduction process has yet to be studied. Therefore, this study explores the potential of combining Zn-modified rGO with CuO photocatalysts and performing these rGO/CuO composite photocatalysts to convert CO₂ into valuable chemical products. The rGO was synthesized by using a Zn-modified Hummers' method and covalently grafted with CuO by amine functionalization with three different compositions (1:10, 1:20, and 1:30) of rGO/CuO photocatalyst. XRD, FTIR, and SEM were used to investigate the crystallinity, chemical bonds, and morphology of the prepared rGO and rGO/CuO composites. The performance of rGO/CuO photocatalysts for the CO₂ reduction process was quantitively measured by GC-MS. We found that the rGO showed successful reduction using a Zn reducing agent. The rGO sheet could be grafted with CuO particles and resulted in a good morphology of rGO/CuO, as shown from the XRD, FTIR, and SEM results. The rGO/CuO material showed photocatalytic performance due to the advantages of synergistic components and resulted in methanol, ethanolamine, and aldehyde as fuel with amounts of 37.12, 8730, and 17.1 mmol/g catalyst, respectively. Meanwhile, adding CO₂ flow time increases the resulting quantity of the product. In conclusion, the rGO/CuO composite could have potential for large-scale CO₂ conversion and storage applications.

Electrocatalytic Reactions for Converting CO2 to Value-Added Products: Recent Progress and Emerging Trends

Carbon dioxide (CO₂) emissions are an important environmental issue that causes greenhouse and climate change effects on the earth. Nowadays, CO₂ has various conversion methods to be a potential carbon resource, such as photocatalytic, electrocatalytic, and photo-electrocatalytic. CO₂ conversion into value-added products has many advantages, including facile control of the reaction rate by adjusting the applied voltage and minimal environmental pollution. The development of efficient electrocatalysts and improving their viability with appropriate reactor designs is essential for the commercialization of this environmentally friendly method. In addition, microbial electrosynthesis which utilizes an electroactive bio-film electrode as a catalyst can be considered as another option to reduce CO₂. This review highlights the methods which can contribute to the increase in efficiency of carbon dioxide reduction (CO₂R) processes through electrode structure with the introduction of various electrolytes such as ionic liquid, sulfate, and bicarbonate electrolytes, with the control of pH and with the control of the operating pressure and temperature of the electrolyzer. It also presents the research status, a fundamental understanding of carbon dioxide reduction reaction (CO₂RR) mechanisms, the development of electrochemical CO₂R technologies, and challenges and opportunities for future research.

Emerging materials for electrochemical CO2 reduction: progress and optimization strategies of carbon-based single-atom catalysts

The electrochemical CO₂ reduction reaction can effectively convert CO₂ into promising fuels and chemicals, which is helpful in establishing a low-carbon emission economy. Compared with other types of electrocatalysts, single-atom catalysts (SACs) immobilized on carbon substrates are considered to be promising candidate catalysts. Atomically dispersed SACs exhibit excellent catalytic performance in CO₂RR due to their maximum atomic utilization, unique electronic structure, and coordination environment. In this paper, we first briefly introduce the synthetic strategies and characterization techniques of SACs. Then, we focus on the optimization strategies of the atomic structure of carbon-based SACs, including adjusting the coordination atoms and coordination numbers, constructing the axial chemical environment, and regulating the carbon substrate, focusing on exploring the structure-performance relationship of SACs in the CO₂RR process. In addition, this paper also briefly introduces the diatomic catalysts (DACs) as an extension of SACs. At the end of the paper, we summarize the article with an exciting outlook discussing the current challenges and prospects for research on the application of SACs in CO₂RR.

Recent progress on covalent organic framework materials as CO2 reduction electrocatalysts

CO₂ emission caused by fuel combustion and human activity has caused severe climate change and other subsequent pollutions around the world. Carbon neutralization via various novel technologies to alleviate the CO₂ level in the atmosphere has thus become one of the major topics in modern research field. These advanced technologies cover CO₂ capture, storage and conversion, etc., and electrocatalytic CO₂ reduction reaction (CO₂RR) by heterogeneous catalysts is among the most promising methods since it could utilize renewable energy and generate valuable fuels and chemicals. Covalent organic frameworks (COFs) represent crystalline organic polymers with highly rigid, conjugated structures and tunable porosity, which exhibit significant potential as heterogeneous electrocatalysts for CO₂RR. This review briefly introduces related pioneering works in COF-based materials for electrocatalytic CO₂RR in recent years and provides a basis for future design and synthesis of highly active and selective COF-based electrocatalysts in this direction.

Nano-Ag: Environmental applications and perspectives

Silver nanoparticles (AgNPs) are promising bactericidal agents and plasmonic NPs for environmental applications, owing to their various favorable properties. For example, AgNPs enables reactive oxygen species (ROS) generation, surface plasmon resonance (SPR), and specific reaction selectivities. In fact, AgNPs-based materials and their antimicrobial, optical, and electrical effects are at the forefront of nanotechnology, having applications in environmental disinfection, elimination of environmental pollutants, environmental detection, and energy conversions. This review aims to comprehensively summarize the advanced applications and fundamental mechanisms to provide the guidelines for future work in the field of AgNPs implanted functional materials. The state-of-art terms including (photo)(electro)catalytic reactions, heterojunction formation, the generation and attacking of ROS, genetic damage, hot electron generation and transfer, localized surface plasmon resonance (LSPR), plasmon resonance energy transfer (PERT), near field electromagnetic enhancement, structure-function relationship, and reaction selectivities have been covered in this review. It is expected that this review may provide insights into the rational development in the next generation of AgNPs-based nanomaterials with excellent performances.

Rational-Designed Principles for Electrochemical and Photoelectrochemical Upgrading of CO2 to Value-Added Chemicals

The chemical transformation of carbon dioxide (CO₂ ) has been considered as a promising strategy to utilize and further upgrade it to value-added chemicals, aiming at alleviating global warming. In this regard, sustainable driving forces (i.e., electricity and sunlight) have been introduced to convert CO₂ into various chemical feedstocks. Electrocatalytic CO₂ reduction reaction (CO₂ RR) can generate carbonaceous molecules (e.g., formate, CO, hydrocarbons, and alcohols) via multiple-electron transfer. With the assistance of extra light energy, photoelectrocatalysis effectively improve the kinetics of CO₂ conversion, which not only decreases the overpotentials for CO₂ RR but also enhances the lifespan of photo-induced carriers for the consecutive catalytic process. Recently, rational-designed catalysts and advanced characterization techniques have emerged in these fields, which make CO₂ -to-chemicals conversion in a clean and highly-efficient manner. Herein, this review timely and thoroughly discusses the recent advancements in the practical conversion of CO₂ through electro- and photoelectrocatalytic technologies in the past 5 years. Furthermore, the recent studies of operando analysis and theoretical calculations are highlighted to gain systematic insights into CO₂ RR. Finally, the challenges and perspectives in the fields of CO₂ (photo)electrocatalysis are outlined for their further development.

Nitrogen-Doped Carbon Polyhedrons Confined Fe-P Nanocrystals as High-Efficiency Bifunctional Catalysts for Aqueous Zn-CO2 Batteries

Emerging Fe bonded with heteroatom P in carbon matrix (FePC) holds great promise for electrochemical catalysis, but the design of highly active and cost-efficient FePC structure for the electrocatalytic CO₂ reduction reaction (CO₂ RR) and aqueous ZnCO₂ batteries (ZCBs) is still challenging. Herein, polyhedron-shaped bifunctional electrocatalysts, FeP nanocrystals anchored in N-doped carbon polyhedrons (Fe-P@NCPs), toward a reversible aqueous ZnCO₂ battery, are reported. The Fe-P@NCPs are synthesized through a facile strategy by using self-templated zeolitic imidazolate frameworks (ZIFs), followed by an in situ high-temperature calcination. The resultant catalysts exhibit aqueous CO₂ RR activity with a CO Faradaic efficiency up to 95% at -0.55 V versus reversible hydrogen electrode (RHE), comparable to the previously best-reported values of FeNC structure. The as-constructed ZCBs with designed Fe-P@NCPs cathode, show the peak power density of 0.85 mW cm^-2 and energy density of 231.8 Wh kg^-1 with a cycling durability over 500 cycles, and outstanding stability in terms of discharge voltage for 7 days. The high selectivity and efficiency of the battery are attributed to the presence of highly catalytic FeP nanocrystals in N-doped carbon matrix, which can effectively increase the number of catalytically active sites and interfacial charge-transfer conductivity, thereby improving the CO₂ RR activity.

A Multiscale Strategy to Construct Cobalt Nanoparticles Confined within Hierarchical Carbon Nanofibers for Efficient CO2 Electroreduction

The efficiency of CO₂ electroreduction has been largely limited by the activity of the catalysts as well as the three-phase interface. Herein, a multiscale strategy is proposed to synthesize hierarchical nanofibers covered by carbon nanotubes and embedded with cobalt nanoparticles (Co/CNT/HCNF). The confinement effect of carbon nanotubes can restrict the diameter of the cobalt particles down to several nanometers and prevent the easy corrosion of these nanoparticles. The three-dimensional carbon nanofibers, in size range of several hundred nanometers, improve the electrochemically active surface area, facilitate electron transfer, and accelerate CO₂ transportation. These cross-linked carbon nanofibers eventually form a freestanding Co/CNT/HCNF membrane of dozens of square centimeters. Consequently, Co/CNT/HCNF produces CO with 97% faradaic efficiency at only -0.4 V_RHE cathode potential in an H-type cell. From the regulation of catalyst nanostructure to the design of macrography devices, Co/CNT/HCNF membrane can be directly used as the gas-diffusion compartment in a flow cell device. Co/CNT/HCNF membrane generates CO with faradaic efficiencies higher than 90% and partial current densities greater than 300 mA cm^-2 for at least 100-h stability. This strategy provides a successful example of efficient catalysts for CO₂ electroreduction and also has the feasibility in other self-standing energy conversion devices.

A layered Mn-based coordination polymer as an efficient heterogeneous catalyst for CO2 cycloaddition under mild conditions

A layered coordination polymer has been constructed by using a semi-rigid ligand, exhibiting a robust catalytic activity toward the cycloaddition of CO2 with epoxides.