Simultaneously Engineering the Coordination Environment and Pore Architecture of Metal-Organic Framework-Derived Single-Atomic Iron Catalysts for Ultraefficient Oxygen Reduction

Rational design of Fe, N co-doped porous carbon derived from conjugated microporous polymer as an electrocatalytic platform for oxygen reduction reaction

Porous iron-nitrogen-doped carbons (FeNC) offer a great platform for construction of cathodic oxygen reduction reaction (ORR) catalysts in fuel cells. However, challenges still remain regarding with the collapse of carbon-skeleton during pyrolysis, uneven distribution of active sites and aggregation of metal atoms. In this work, we synthesized Fe, N co-doped conjugated microporous polymer (FeN-CMP) through a facile bottom-up strategy using 1,3,5-triethynylbenzene and iron-chelated 3,8-dibromo-1,10-phenanthroline as monomers, ensuring the uniform coordination of N with Fe element in network. Then, the resulting FeN-CMP was treated by pyrolysis without structural collapse to obtain porous FeNC electrocatalyst for ORR. The most active catalyst was fabricated under 900 °C, which exhibits remarkable ORR activity in alkaline medium with half-wave potential of 0.796 V (18 mV and 105 mV positive deviation from the commercial Pt/C catalyst and post-doping catalyst), high selectivity with nearly 4e- transfer process and excellent methanol tolerance. Our study first developed porous FeNC electrocatalysts derived from Fe, N-anchoring CMPs based on pre-functionalization of monomers, which exhibits great potential as an alternative to commercial Pt/C catalyst for ORR, and provides a feasible strategy of developing multi-atoms doping catalysts for energy storage and conversion as well as heterogeneous catalysis.

Microenvironment Tailoring of NiCo Alloys Coupled with FePc as Efficient Bifunctional Catalysts for High-Rate Zn-Air Batteries

The practical application of Zn-air batteries require exploring cost-effective and durable bifunctional electrocatalysts. However, the simultaneous preparation of catalysts with bifunctional activities for oxygen reduction reaction (ORR) and oxygen precipitation reaction (OER) remains challenging. Herein, we synthesized a novel hybrid catalyst (FePc/NiCo/CNT), which couples NiCo alloy with FePc through electrostatic interaction. The interaction between FePc and NiCo alloy can enhance the intrinsic catalytic activity of the active site Fe-N4 and prevent the electrolyte corrosion of the metal alloy, ultimately improving the stability of the catalyst by the microenvironment-tailoring strategy. The resultant FePc/NiCo/CNT catalyst exhibits outstanding oxygen reduction reaction (ORR) activity with a half-wave potential of 0.88 V, which is attributed to the abundant Fe-Nx active sites. Furthermore, the electron interactions between NiCo/CNT and FePc accelerate electron transfer and enhance the activation of oxygen intermediates, consequently boosting the OER activity with an overpotential of 260 mV at 10 mA cm-2. The Zn-air batteries assembled with FePc/NiCo/CNT show a high power density of 175.1 mW cm-2 and excellent cycling stability for up to 430 h at 20 mA cm-2. The preparation of oxygen electrode catalysts for renewable clean energy devices can be made more convenient with this directly engineered strategy for ORR and OER active centers.

Berlin Green with tunable iron content as ultra-high rate host for efficient aqueous ammonium ion storage

Prussian blue analogues (PBAs) are regarded as promising cathode materials for ammonium-ion batteries (AIBs) because of their low cost and superb theoretical capacity. However, its inherently poor conductivity and structural collapse can significantly limit the enhancement of rate property and cycling stability. In this work, Berlin Green (BG) electrode materials with similar wool-like clusters were constructed by direct precipitation method to accelerate the kinetic, which realizes outstanding cycling stability. Berlin Green with the appropriate amount of iron (BG-2) has a fast ion transport channel, enhanced structure stability, highly reversible insertion/extraction of NH4+, and fine electrochemical reaction activity. Benefiting from the unique architecture and component, the BG-2 electrode shows an excellent rate performance with a discharge/charge specific capacity of 60.1/59.3 mAh g-1 at 5 A g-1. Even at 5 A g-1, BG-2 exhibits remarkable cycling stability with an initial discharge capacity of 59.5 mAh g-1 and a capacity retention rate of approximately 76% after 30,000 cycles. The BG-2 reveals exceedingly good electrochemical reversibility during the process of NH4+ (de)insertion. BG materials indicate huge potential as a cathode material for the next generation of high-performance aqueous batteries.

Constructing Nano-Heterostructure with Dual-Site to Boost H2O2 Activation and Regulate the Transformation of Free Radicals

A major issue with Fenton-like reaction is the excessive consumption of H2O2 caused by the sluggish regeneration rate of low-valent metal, and how to improve the activation efficiency of H2O2 has become a key in current research. Herein, a nano-heterostructure catalyst (1.0-MnCu/C) based on nano-interface engineering is constructed by supporting Cu and MnO on carbon skeleton, and its kinetic rate for the degradation of tetracycline hydrochloride is 0.0436 min-1, which is 2.9 times higher than that of Cu/C system (0.0151 min-1). The enhancement of removal rate results from the introduced Mn species can aggregate and transfer electrons to Cu sites through the electron bridge Mn-N/O-Cu, thus preventing Cu2+ from oxidizing H2O2 to form O2 •-, and facilitating the reduction of Cu2+ and generating more reactive oxygen species (1O2 and ·OH) with stronger oxidation ability, resulting in H2O2 utilization efficiency is 1.9 times as much as that of Cu/C. Additionally, the good and stable practical application capacity in different bodies demonstrates that it has great potential for practical environmental remediation.

Sulfur-bridge ligands altering the microenvironment of single-atom CoN3S sites to boost the oxygen reduction reaction

We report here an asymmetric N,S-coordinated cobalt-based single-atom catalyst with sulfur (S)-bridge ligands (Co-N/S-C) for the oxygen reduction reaction (ORR). The Co-N/S-C exhibits a half-wave potential (E1/2) of 0.908 V versus RHE, outperforming most state-of-the-art ORR catalysts. Theoretical calculations indicate that the CoN3SC10-S moiety facilitates the ORR kinetics by optimizing the adsorption of intermediates. This work provides new insights into the design of single-atom catalysts for electrocatalysis through heteroatom-bridge ligand engineering.

Interfacial Micro-Environment of Electrocatalysis and Its Applications for Organic Electro-Oxidation Reaction

Conventional designing principal of electrocatalyst is focused on the electronic structure tuning, on which effectively promotes the electrocatalysis. However, as a typical kind of electrode-electrolyte interface reaction, the electrocatalysis performance is also closely dependent on the electrocatalyst interfacial micro-environment (IME), including pH, reactant concentration, electric field, surface geometry structure, hydrophilicity/hydrophobicity, etc. Recently, organic electro-oxidation reaction (OEOR), which simultaneously reduces the anodic polarization potential and produces value-added chemicals, has emerged as a competitive alternative to oxygen evolution reaction, and the role IME played in OEOR is receiving great interest. Thus, this article provides a timely review on IME and its applications toward OEOR. In this review, the IME for conventional gas-involving reactions, as a contrast, is first presented, and then the recent progresses of IME toward diverse typical OEOR are summarized; especially, some representative works are thoroughly discussed. Additionally, cutting-edge analytical methods and characterization techniques are introduced to comprehensively understand the role IME played in OEOR. In the last section, perspectives and challenges of IME regulation for OEOR are shared.

Understanding the Pathway Switch of the Oxygen Reduction Reaction from Single- to Double-/Triple-Atom Catalysts: A Dual Channel for Electron Acceptance-Backdonation

Recently, a lot of attention has been dedicated to double- or triple-atom catalysts (DACs/TACs) as promising alternatives to platinum-based catalysts for the oxygen reduction reaction (ORR) in fuel cell applications. However, the ORR activity of DACs/TACs is usually theoretically understood or predicted using the single-site association pathway (O2 → OOH* → O* → OH* → H2O) proposed from Pt-based alloy and single-atom catalysts (SACs). Here, we investigate the ORR process on a series of graphene-supported Fe-Co DACs/TACs by means of first-principles calculation and an electrode microkinetic model. We propose that a dual channel for electron acceptance-backdonation on adjacent metal sites of DACs/TACs efficiently promotes O-O bond breakage compared with SACs, which makes ORR switch to proceed through dual-site dissociation pathways (O2 → O* + OH* → 2OH* → OH* → H2O) from the traditional single-site association pathway. Following this revised ORR network, a complete reaction phase diagram of DACs/TACs is established, where the preferential ORR pathways and activity can be described by a three-dimensional volcano plot spanned by the adsorption free energies of ΔG(O*) and ΔG(OH*). Besides, the kinetics preferability of dual-site dissociation pathways is also appropriate for other graphene- or oxide-supported DACs/TACs. The contribution of dual-site dissociation pathways, rather than the traditional single-site association pathway, makes the theoretical ORR activity of DACs/TACs in better agreement with available experiments, rationalizing the superior kinetic behavior of DACs/TACs to that of SACs. This work reveals the origin of ORR pathway switching from SACs to DACs/TACs, which broadens the ideas and lays the theoretical foundation for the rational design of DACs/TACs and may also be heuristic for other reactions catalyzed by DACs/TACs.

Identifying And Unveiling the Role of Multivalent Metal States for Bidirectional UOR and HER Over Ni, Mo-Trithiocyanuric Based Coordination Polymer

Urea oxidation reaction (UOR), an ideal alternative to oxygen evolution reaction (OER), has received increasing attention for realizing energy-saving H2 production and relieving pollutant degradation. Normally, most studied Ni-based UOR catalysts pre-oxidate to NiOOH and then act as active sites. However, the unpredictable transformation of the catalyst's structure and its dissolution and leaching, may complicate the accuracy of mechanism studies and limit its further applications. Herein, a novel self-supported bimetallic Mo-Ni-C3 N3 S3 coordination polymers (Mo-NT@NF) with strong metal-ligand interactions and different H2 O/urea adsorption energy are prepared, which realize a bidirectional UOR/hydrogen evolution reaction (HER) reaction pathway. A series of Mo-NT@NF is prepared through a one-step mild solvothermal method and their multivalent metal states and HER/UOR performance relationship is evaluated. Combining catalytic kinetics, in situ electrochemical spectroscopic characterization, and density-functional theory (DFT) calculations, a bidirectional catalytic pathway is proposed by N, S-anchored Mo5+ and reconstruction-free Ni3+ sites for catalytic active center of HER and UOR, respectively. The effective anchoring of the metal sites and the fast transfer of the intermediate H* by N and S in the ligand C3 N3 S3 H3 further contribute to the fast kinetic catalysis. Ultimately, the coupled HER||UOR system with Mo-NT@NF as the electrodes can achieve energy-efficient overall-urea electrolysis for H2 production.

Recent advances of bifunctional catalysts for zinc air batteries with stability considerations: from selecting materials to reconstruction

With the growing depletion of traditional fossil energy resources and ongoing enhanced awareness of environmental protection, research on electrochemical energy storage techniques like zinc-air batteries is receiving close attention. A significant amount of work on bifunctional catalysts is devoted to improving OER and ORR reaction performance to pave the way for the commercialization of new batteries. Although most traditional energy storage systems perform very well, their durability in practical applications is receiving less attention, with issues such as carbon corrosion, reconstruction during the OER process, and degradation, which can seriously impact long-term use. To be able to design bifunctional materials in a bottom-up approach, a summary of different kinds of carbon materials and transition metal-based materials will be of assistance in selecting a suitable and highly active catalyst from the extensive existing non-precious materials database. Also, the modulation of current carbon materials, aimed at increasing defects and vacancies in carbon and electron distribution in metal-N-C is introduced to attain improved ORR performance of porous materials with fast mass and air transfer. Finally, the reconstruction of catalysts is introduced. The review concludes with comprehensive recommendations for obtaining high-performance and highly-durable catalysts.

Relationship between Structure and Performance of Atomic-Scale Electrocatalysts for Water Splitting

Atomic-scale electrocatalysts greatly improve the performance and efficiency of water splitting but require special adjustments of the supporting structures for anchoring and dispersing metal single atoms. Here, the structural evolution of atomic-scale electrocatalysts for water splitting is reviewed based on different synthetic methods and structural properties that create different environments for electrocatalytic activity. The rate-determining step or intermediate state for hydrogen or oxygen evolution reactions is energetically stabilized by the coordination environment to the single-atom active site from the supporting material. In large-scale practical use, maximizing the loading amount of metal single atoms increases the efficiency of the electrocatalyst and reduces the economic cost. Dual-atom electrocatalysts with two different single-atom active sites react with an increased number of water molecules and reduce the adsorption energy of water derived from the difference in electronegativity between the two metal atoms. In particular, single-atom dimers induce asymmetric active sites that promote the degradation of H2 O to H2 or O2 evolution. Consequently, the structural properties of atomic-scale electrocatalysts clarify the atomic interrelation between the catalytic active sites and the supporting material to achieve maximum efficiency.

Double Riveting and Steric Hindrance Strategy for Ultrahigh-Loading Atomically Dispersed Iron Catalysts Toward Oxygen Reduction

Atomically dispersed iron on nitrogen doped carbon displays high intrinsic activity toward oxygen reduction reaction, and has been identified as an attractive candidate to precious platinum catalysts. However, the loading of atomic iron sites is generally limited to below 4 wt% due to the undesired formation of iron-related particles at higher contents. Herein, this work overcomes this limit by a double riveting and steric hindrance strategy to achieve monodispersed iron with a high-loading of 12.8 wt%. Systematic study reveals that chemical riveting of atomic iron in ZIF-8 framework, chelation of Fe ions with interconfined 1,4-phenylenebisboronic, and physical hindrance are essential to obtain high-loading monodispersed Fe moieties. Resultantly, designed Fe-N-C-PDBA exhibits superior catalytic activity and excellent stability over commercial platinum catalysts toward oxygen reduction reaction in both half-cells and zinc-air fuel cells (ZAFCs). This provides an avenue for developing high-loading single-atom catalysts (SACs) for energy devices.

Heteroatom-Driven Coordination Fields Altering Single Cerium Atom Sites for Efficient Oxygen Reduction Reaction

For current single-atom catalysts (SACs), modulating the coordination environments of rare-earth (RE) single atoms with complex electronic orbital and flexible chemical states is still limited. Herein, cerium (Ce) SAs supported on a P, S, and N co-doped hollow carbon substrate (Ce SAs/PSNC) for the oxygen reduction reaction (ORR) are reported. The as-prepared Ce SAs/PSNC possesses a half-wave potential of 0.90 V, a turnover frequency value of 52.2 s-1 at 0.85 V, and excellent stability for the ORR, which exceeds the commercial Pt/C and most recent SACs. Ce SAs/PSNC-based liquid zinc-air batteries (ZABs) exhibit a high and stable open-circuit voltage of 1.49 V and a maximum power density of 212 mW cm-2 . As the catalyst of the air cathode, it also displays remarkable performance in flexible electronic devices. Theoretical calculations reveal that the introduction of S and P sites induces significant electronic modulations to the Ce SA active sites. The P and S dopings promote the electroactivity of Ce SAs and improve the overall site-to-site electron transfer within the Ce SAs/PSNC. This work offers a unique perspective for modulating RE-based SACs in a complex coordination environment toward superior electrocatalysis and broad applications in energy conversion and storage devices.

Fe/Co dual metal catalysts modulated by S-ligands for efficient acidic oxygen reduction in PEMFC

Here, we report a conceptual strategy for introducing spatial sulfur (S)-bridge ligands to regulate the coordination environment of Fe-Co-N dual-metal centers (Spa-S-Fe,Co/NC). Benefiting from the electronic modulation, Spa-S-Fe,Co/NC catalyst showed remarkably enhanced oxygen reduction reaction (ORR) performance with a half-wave potential (E1/2) of 0.846 V and satisfactory long-term durability in acidic electrolyte. Combined experimental and theoretical studies revealed that the excellent acidic ORR activity with a remarkable stability observed for Spa-S-Fe,Co/NC is attributable to the optimal adsorption-desorption of ORR oxygenated intermediates achieved through charge-modulation of Fe-Co-N bimetallic centers by the spatial S-bridge ligands. These findings provide a unique perspective to regulate the local coordination environment of catalysts with dual-metal-centers to optimize their electrocatalytic performance.

Role of Peripheral Coordination Boron in Electrocatalytic Nitrogen Reduction over N-Doped Graphene-Supported Single-Atom Catalysts

In this work, we investigate the effect of peripheral B doping on the electrocatalytic nitrogen reduction reaction (NRR) performance of N-doped graphene-supported single-metal atoms using density functional theory (DFT) calculations. Our results showed that the peripheral coordination of B atoms could improve the stability of the single-atom catalysts (SACs) and weaken the binding of nitrogen to the central atom. Interestingly, it was found that there was a linear correlation between the change in the magnetic moment (μ) of single-metal atoms and the change in the limiting potential (U_L) of the optimum NRR pathway before and after B doping. It was also found that the introduction of the B atom suppressed the hydrogen evolution reaction, thereby enhancing the NRR selectivity of the SACs. This work provides useful insights into the design of efficient SACs for electrocatalytic NRR.

Atomic Fe/Zn anchored N, S co-doped nano-porous carbon for boosting oxygen reduction reaction

Dual-single-atom catalysts are well-known due to their excellent catalytic performance of oxygen reduction reaction (ORR) and the tunable coordination environment of the active sites. However, it is still challengable to finely modulate the electronic states of the metal atoms and facilely fabricate a catalyst with dual-single atoms homogeneously dispersed on conductive skeletons with good mass transport. Herein, atomic FeN_x/ZnN_x sites anchored N, S co-doped nano-porous carbon plates/nanotubes material (Fe_0.10ZnNSC) is rationally prepared via a facile room-temperature reaction and high-temperature pyrolysis. The as-prepared Fe_0.10ZnNSC catalyst exhibits a positive onset potential of 0.956 V, an impressive half-wave potential of 0.875 V, excellent long-term durability, and a high methanol resistance, outperforming the benchmark Pt/C. The outstanding ORR performance of Fe_0.10ZnNSC is due to its unique nanoarchitecture: a large specific surface area (1092.8 cm² g^-1) and well-developed nanopore structure ensure the high accessibility of active sites; the high conductivity of the carbon matrix guarantees a strong ability to transport electrons to the active sites; and the optimized electronic states of FeN_x and ZnN_x sites possess good oxygen intermediate adsorption/desorption capacity. This strategy can be extended to design and fabricate other non-precious dual-single-atom ORR catalysts.

Metal-organic framework-derived advanced oxygen electrocatalysts as air-cathodes for Zn-air batteries: recent trends and future perspectives

Electrochemical energy storage devices with stable performance, high power output, and energy density are urgently needed to meet the global energy demand. Among the different electrochemical energy storage devices, batteries have become the most promising energy technologies and ranked as a highly investigated research subject. Recently, metal-air batteries especially Zn-air batteries (ZABs) have attracted enormous scientific interest in the electrochemical community due to their ease of operation, sustainability, environmental friendliness, and high efficiency. The oxygen electrocatalytic reactions [oxygen reduction reaction (ORR) and oxygen evolution reaction (OER)] are the two fundamental reactions for the development of ZABs. Noble metal-based electrocatalysts are widely considered as the benchmark for oxygen electrocatalysis, but their practical application in rechargeable ZAB is hindered due to several shortcomings. Thus, to replace noble metal-based catalysts, a wide range of transition-metal-based materials and heteroatom-doped metal-free carbon materials has been extensively investigated as oxygen electrocatalysts for ZABs. Recently, metal-organic frameworks (MOFs) with unique structural flexibility and uniformly dispersed active sites have become attractive precursors for the synthesis of a large variety of advanced functional materials. Herein, we summarize the recent progress of MOF-derived oxygen electrocatalysts (MOF-derived carbon nanomaterials, MOF-derived alloys/nanoparticles, and MOF-derived single-atom electrocatalysts) for ZABs. Specifically, we highlight MOF-derived single-atom electrocatalysts owing to the wide exploration of these emerging materials in electrocatalysis. The influence of the active sites, structural/compositional design, and porosity of MOF-derived advanced materials on the oxygen electrocatalytic performances is also discussed. Finally, the existing challenges and prospects of MOF-derived electrocatalysts in ZABs are briefly highlighted.

Role of the Support Effects in Single-Atom Catalysts

In recent years, single-atom catalysts (SACs) have received a significant amount of attention due to their high atomic utilization, low cost, high reaction activity, and selectivity for multiple catalytic reactions. Unfortunately, the high surface free energy of single atoms leads them easily migrated and aggregated. Therefore, support materials play an important role in the preparation and catalytic performance of SACs. Aiming at understanding the relationship between support materials and the catalytic performance of SACs, the support effects in SACs are introduced and reviewed herein. Moreover, special emphasis is placed on exploring the influence of the type and structure of supports on SAC catalytic performance through advanced characterization and theoretical research. Future research directions for support materials are also proposed, providing some insight into the design of SACs with high efficiency and high loading.

Ionic Covalent Organic Frameworks-Derived Cobalt Single Atoms and Nanoparticles for Efficient Oxygen Electrocatalysis

Metal single atoms show outstanding electrocatalytic activity owing to the abundant atomic reactive sites and superior stability. However, the preparation of single atoms suffers from inexorable metal aggregation which is harmful to electrocatalytic activity. Here, ionic covalent organic frameworks (iCOFs) are employed as the sacrificial precursor to mitigate the metal aggregation and subsequent formation of bulky particles. Molecular dynamics simulation shows that iCOFs can trap and confine more Co ions as compared to neutral COFs, resulting in the formation of a catalyst composed of Co single atoms and uniformly distributed Co nanoparticles (Co_SA &Co_NP-10 ). However, the neutral COFs derive a catalyst composed of Co atomic clusters and large Co nanoparticles (Co_AC &Co_NP-25 ). The Co_SA &Co_NP-10 catalyst exhibits higher oxygen bifunctional electrocatalytic activities than Co_AC &Co_NP-25 , coinciding with the density functional theory results. Taking the Co_SA &Co_NP-10 as the air cathode in Zn-air batteries (ZABs), the aqueous ZAB presents a high power density of 181 mW cm^-2 , a specific capacity of 811 mAh g^-1 as well as a long cycle life of 407 h at a current density of 10 mA cm^-2 , while the quasi-solid state ZAB displays a power density of 179 mW cm^-2 and the cycle life of 30 h.

Role of heteroatom-doping in enhancing catalytic activities and the stability of single-atom catalysts for oxygen reduction and oxygen evolution reactions

Single-atom catalysts (SACs) are promising as efficient electrocatalysts for clean energy technologies such as fuel cells, water splitting, and metal-air batteries. Still, the unsatisfactory loading density and stability of the catalytic active centers limit their applications. Herein, a doping strategy is explored to achieve highly efficient and stable SACs for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The stability, electronic structures, and ORR/OER overpotentials of S-doped transition metal-nitrogen-carbon SAC structures were investigated using first-principles calculation methods. An intrinsic descriptor linking the intrinsic properties of catalysts and the catalytic activity was established for screening the best SACs. The theoretical predictions are well consistent with the experimental results, which provide a theoretical basis for understanding the catalytic mechanism and an approach for the rational design of SACs for clean energy conversion and storage.

In Situ S-Doping Strategy of Promoting Iron Coordinated by Nitrogen-Doped Carbon Nanosheets for Efficient Oxygen Reduction Reaction

Improving transition metal-nitrogen-carbon (M-N-C) as a noble-metal-free catalyst for the oxygen reduction reaction (ORR) is critical to achieve low-cost electrochemical energy conversion. Herein, an in situ S doping strategy of enhancing Fe-N-C activity for ORR was developed by newly designed Fe(II) ion coordinated S-containing bis(imino)-pyridine-based polymers as precursors, which were synthesized through copolymerizing three monomers of 2, 6-diacetylpyridine (DAP), triamterene (TIT), and 2,5-dithiobiurea (DTB) as both N and S sources. All samples derived from various molar ratios of the three monomers possess a self-supporting structure of nanosheets. Additionally, incorporating DTB into the copolymer can not only strongly affect the derived coordinative species of N dopants to Fe atom but also effectively induce the synergistic effect between S dopants and FeNx moieties, resulting a significant improvement for ORR. The S-doped Fe-N-C nansheets with Fe coordinated by 4 pyrrolic N dopants exhibit the highest ORR activity and stability in alkaline media with a higher power output of Zn-air battery than that of the same loading of Pt/C. Theoretical calculation identifies that the thiophenic S dopant adjacent to Fe-pyrrolic N moiety can decrease the d band center of Fe atom, greatly weakening the energy profiles of oxygenated intermediates and thus enhancing ORR. In addition, because of the designability of transition metal coordinated S-containing bis(imino)-pyridine based polymers in the work, therefore, it is believable that this strategy would open a wide space to explore the structural relationship between precursors and MNx active sites with S dopants for the purpose of achieving highly efficient and robust M-N-C catalysts for energy-related electrocatalysis.

MIL-88-Derived N and S Co-Doped Carbon Materials with Supplemental FeSx to Enhance the Oxygen Reduction Reaction Performance

To overcome the drawbacks of the single N-doped carbon materials, the further development of dual-heteroatoms (N and S) co-doped electrocatalysts is highly anticipated. Herein, N, S-doping and Fe-based carbon materials were synthesized by pyrolyzing a metal–organic framework (MIL-88) with the addition of N-/N, and S-containing ligands (chitosan and L-Cysteine) in the case of iron salt. The resulting electrocatalyst heat-treated at 850 °C (FeNSC-850) displays superior oxygen reduction reaction (ORR) performances to MIL-88-850, with an overall electron transfer number of 3.97 and a minor yield of HO2-% (<2.6%). In addition to the comparable activity to commercial Pt/C in catalyzing the ORR in alkaline solution, the FeNSC-850 also shows higher stability, with a slight decline in half-wave potential (∆E1/2 = 15 mV) after 5000-cycle scanning of cyclic voltammetry. In view of the multiple Fe-based active sites, the additional S doping within FeNSC-850 creates more FeSx active sites for boosting the ORR performances in alkaline solution. 

Theoretical Predictions, Experimental Modulation Strategies, and Applications of MXene-Supported Atomically Dispersed Metal Sites

Atomically dispersed metal sites (ADMSs) attract immense attention because they can be used in the fields of energy and environmental protection as they are characterized by high atomic utilization efficiency and exhibit high activity. Various supports for anchoring isolated metal atoms are developed to construct ADMSs characterized by highly stable and well-defined structures. This can be achieved by increasing the number of anchoring sites and reinforcing metal-support interactions. MXenes, a new series of 2D nanomaterials, exhibit promising potential in stabilizing isolated metal atoms because of their large specific surface areas and unique surface properties. The high conductivity and hydrophilicity of MXenes can be attributed to the nature of surface functionalization and the properties of tunable structures of the materials. Benefiting from these excellent properties, MXenes can find their applications in various fields. Herein, the precise characterization methods that can be followed to study ADMSs, the construction of MXene-supported ADMSs using theoretical predictions, and experimental modulation strategies are summarized, and their corresponding applications in electrocatalysis, organocatalysis, and advanced battery systems are systematically illustrated. It is hoped that this review will provide insights that can be used for the further development of MXene-supported ADMSs.

Tuning d-Band Center of Pt by PtCo-PtSn Heterostructure for Enhanced Oxygen Reduction Reaction Performance

The development of efficient and stable Pt-based catalysts is significant but challenging for fuel cells. Herein, Sn and Co elements are introduced into Pt to form PtCo-PtSn/C heterostructure for enhancing the oxygen reduction reaction (ORR). Electrochemical results indicate that it has remarkable ORR intrinsic activity with a high mass activity (1,158 mA mg^-1 Pt) at 0.9 V in HClO₄ solution, which is 2.18-, 6.81-, and 9.98-fold higher than that of PtCo/C, PtSn/C, and Pt/C. More importantly, the catalytic activity attenuation for PtCo-PtSn/C is only 27.4% after 30 000 potential cycles, showing high stability. Furthermore, theoretical calculations reveal that the enhancement is attributed to charge transfer and the unique structure of PtCo-PtSn/C heterostructure, which regulate the d-band center of Pt and prevent non-noble metals from further dissolution. This work thus opens a way to design and prepare highly efficient Pt-based alloy catalysts for proton exchange membrane fuel cells.