Semiconductor Gas Sensor for Triethylamine Detection

Mesoporous CdO/CdGa2O4 microsphere for rapidly detecting triethylamine at ppb level

Developing fast, accurate and sensitive triethylamine gas sensors with low detection limits is paramount to ensure the safety of workers and the public. However, sensors based on single metal oxide materials still suffer from drawbacks such as low response sensitivity and long response and recovery times. To address these challenges, in this work, a series of mesoporous CdO/CdGa2O4 microspheres were synthesized. We optimized the sensor's sensing performance to triethylamine by fine-tuning the ratio of CdO to CdGa2O4. Among them, CdO:3CdGa2O4-based sensor demonstrates a rapid response time of 2 s to detect 100 ppm of triethylamine, with a high response value of 211 and exceptional selectivity. Furthermore, it exhibits a low detection limit of 20 ppb for triethylamine, making it suitable for practically testing fish freshness. Crucially, electron transfer between the heterojunctions increases the chemically adsorbed oxygen on the materials' surface, thereby enhancing the sensor's response sensitivity to triethylamine. This discovery provides new insights and methodologies for the design of highly efficient triethylamine gas sensors.

Defect-Engineered WO3-x Architectures Coupled with Random Forest Algorithm Enables Real-Time Seafood Quality Assessment

Reliable and real-time monitoring of seafood decay is attracting growing interest for food safety and human health, while it is still a great challenge to accurately identify the released triethylamine (TEA) from the complex volatilome. Herein, defect-engineered WO3-x architectures are presented to design advanced TEA sensors for seafood quality assessment. Benefiting from abundant oxygen vacancies, the obtained WO2.91 sensor exhibits remarkable TEA-sensing performance in terms of higher response (1.9 times), faster response time (2.1 times), lower detection limit (3.2 times), and higher TEA/NH3 selectivity (2.8 times) compared with the air-annealed WO2.96 sensor. Furthermore, the definite WO2.91 sensor demonstrates long-term stability and anti-interference in complex gases, enabling the accurate recognition of TEA during halibut decay (0-48 h). Coupled with the random forest algorithm with 70 estimators, the WO2.91 sensor enables accurate prediction of halibut storage with an accuracy of 95%. This work not only provides deep insights into improving gas-sensing performance by defect engineering but also offers a rational solution for reliably assessing seafood quality.

Phase-Engineered MoSe2/CeO2 Composites for Room-Temperature Gas Sensing with a Drastic Discrimination of NH3 and TEA Gases

Detecting and distinguishing between hazardous gases with similar odors by using conventional sensor technology for safeguarding human health and ensuring food safety are significant challenges. Bulky, costly, and power-hungry devices, such as that used for gas chromatography-mass spectrometry (GC-MS), are widely employed for gas sensing. Using a single chemiresistive semiconductor or electric nose (e-nose) gas sensor to achieve this objective is difficult, mainly because of its selectivity issue. Thus, there is a need to develop new materials with tunable and versatile sensing characteristics. Phase engineering of two-dimensional materials to better utilize their physiochemical properties has attracted considerable attention. Here, we show that MoSe2 phase-transition/CeO2 composites can be effectively used to distinguish ammonia (NH3) and triethylamine (TEA) at room temperature. The phase transition of nanocomposite samples from semimetallic (1T) to semiconducting (2H) prepared at different synthesis temperatures is confirmed via X-ray photoelectron spectroscopy (XPS). A composite sensor in which the 2H phase of MoSe2 is predominant lacks discrimination capability and is less responsive to NH3 and TEA. An MoSe2/CeO2 composite sensor with a higher 1T phase content exhibits high selectivity for NH3, whereas one with a higher 2H phase content (2H > 1T) shows more selective behavior toward TEA. For example, for 50% relative humidity, the MoSe2/CeO2 sensor's signal changes from the baseline by 45% and 58% for 1 ppm of NH3 and TEA, respectively, indicating a low limit of detection (LOD) of 70 and 160 ppb, respectively. The composites' superior sensing characteristics are mainly attributed to their large specific surface area, their numerous active sites, presence of defects, and the n-n type heterojunction between MoSe2 and CeO2. The sensing mechanism is elucidated using Raman spectroscopy, XPS, and GC-MS results. Their phase-transition characteristics render MoSe2/CeO2 sensors promising for use in distributed, low-cost, and room-temperature sensor networks, and they offer new opportunities for the development of integrated advanced smart sensing technologies for environmental and healthcare.

3D Nanoprinting of Heterogeneous Metal Oxides with High Shape Fidelity

3D nanoprinting can significantly enhance the performance of sensors, batteries, optoelectronic/microelectronic devices, etc. However, current 3D nanoprinting methods for metal oxides are suffering from three key issues including limited material applicability, serious shape distortion, and the difficulty of heterogeneous integration. This paper discovers a mechanism in which imidazole and acrylic acid synergistically coordinate with metal ions in water. Using the mechanism, this work develops a series of metal ion synergistic coordination water-soluble (MISCWS) resins for 3D nanoprinting of various metal oxides, including MnO2, Cr2O3, Co3O4, and ZnO, as well as heterogeneous structures of MnO2/NiO, Cr2O3/Al2O3, and ZnO/MgO. Besides, the synergistic coordination effect results in a 2.54-fold increase in inorganic mass fraction within the polymer, compared with previous works, which effectively mitigates the shape distortion of metal oxide microstructures. Based on this method, this work also demonstrates a 3D ZnO microsensor with a high sensitivity (1.113 million at 200 ppm NO2), surpassing the conventional 2D ZnO sensors by tenfold. The method yields high-fidelity 3D structures of heterogeneous metal oxides with nanoscale resolution, paving the way for applications such as sensing, micro-optics, energy storage, and microsystems.

Mo-Doped LaFeO3 Gas Sensors with Enhanced Sensing Performance for Triethylamine Gas

Triethylamine is a common volatile organic compound (VOC) that plays an important role in areas such as organic solvents, chemical industries, dyestuffs, and leather treatments. However, exposure to triethylamine atmosphere can pose a serious threat to human health. In this study, gas-sensing semiconductor materials of LaFeO3 nano materials with different Mo-doping ratios were synthesized by the sol-gel method. The crystal structures, micro morphologies, and surface states of the prepared samples were characterized by XRD, SEM, and XPS, respectively. The gas-sensing tests showed that the Mo doping enhanced the gas-sensing performance of LaFeO3. Especially, the 4% Mo-doped LaFeO3 exhibited the highest response towards triethylamine (TEA) gas, a value approximately 11 times greater than that of pure LaFeO3. Meantime, the 4% Mo-doped LaFeO3 sensor showed a remarkably robust linear correlation between the response and the concentration (R2 = 0.99736). In addition, the selectivity, stability, response/recovery time, and moisture-proof properties were evaluated. Finally, the gas-sensing mechanism is discussed. This study provides an idea for exploring a new type of efficient and low-cost metal-doped LaFeO3 sensor to monitor the concentration of triethylamine gas for the purpose of safeguarding human health and safety.

Construction of an electrochemical sensor towards environmental hazardous 4-nitrophenol based on Nd(OH)3-embedded VSe2 nanocomposite

The toxicity of 4-nitrophenol (4-NP) is one of the most common threats to the environment; therefore, developing a simple and sensitive analytical method to detect 4-NP is crucial. In this study, we prepared the Nd(OH)3/VSe2 nanocomposite using the simple hydrothermally assisted ultrasonication method and it was used to detect the 4-NP. Different characterization techniques were used to investigate the morphological and chemical compositions of Nd(OH)3/VSe2 nanocomposite. All of these investigations revealed that Nd(OH)3 nanoparticles were finely dispersed on the surface of the VSe2 nanosheet. The electrical conductivity of our prepared samples was evaluated by the electrochemical impedance spectroscopic technique. The CV and DPV methods were used to explore the electrochemical activity of 4-NP at the Nd(OH)3/VSe2/GCE sensor which exhibited a wide linear range (0.001 to 640 µM), low limit of detection (0.008 µM), and good sensitivity (0.41 µA µM-1 cm-2), respectively. Additionally, Nd(OH)3/VSe2/GCE sensor was tested in water samples for the detection of 4-NP, which exhibited good recovery results. The Nd(OH)3/VSe2 electrode material is a novel one for the electrochemical sensor field, and the obtained overall results also proved that our proposed material is an active material for sensor applications.

Ultrafast and Parts-per-Billion-Level MEMS Gas Sensors by Hetero-Interface Engineering of 2D/2D Cu-TCPP@ZnIn2S4 with Enriched Surface Sulfur Vacancies

The primary challenge for resonant-gravimetric gas sensors is the synchronous improvement of the sensitivity and response time, which is restricted by low adsorption capacity and slow mass transfer in the sensing process and remains a great challenge. In this study, a novel 2D/2D Cu-TCPP@ZnIn2S4 composite is successfully constructed, in which Cu-TCPP MOF is used as a core substrate for the growth of 2D ultrathin ZnIn2S4 nanosheets with well-defined {0001} crystalline facets. The Cu-TCPP@ZnIn2S4 sensor exhibited high sensitivity (1.5 Hz@50 and 2.3 Hz@100 ppb), limit of detection (LOD: 50 ppb), and ultrafast (9 s @500 ppb) detection of triethylamine (TEA), which is the lowest LOD and the fastest sensor among the reported TEA sensors at room temperature, tackling the bottleneck for the ultrafast detection of the resonant-gravimetric sensor. These above results provide an innovative and easily achievable pathway for the synthesis of heterogeneous structure sensing materials.

Ag Modified SnS2 Monolayer as a Potential Sensing Material for C4F7N Decompositions: A Density Functional Theory Study

As the field of 2D materials rapidly evolves, substances such as graphene, metal dichalcogenides, MXenes, and MBenes have garnered extensive attention from scholars in the gas sensing domain due to their unique and superior properties. Based on first-principles calculations, this work explored the adsorption characteristics of both intrinsic and silver (Ag) doped tin disulfide (SnS2) toward the decomposition components of the insulating medium C4F7N (namely, CF4, C3F6, and COF2), encompassing the adsorption energy, charge transfer, density of state (DOS), band structure, and adsorption stability. The results indicated that Ag-doped SnS2 exhibited an effective and stable adsorption for C3F6 and COF2, whereas its adsorption for CF4 was comparatively weaker. Additionally, the potential for Ag-SnS2 in detecting C3F6 was highlighted, inferred from the contributions of the band gap variations. This research provides theoretical guidance for the application of Ag-SnS2 as a sensing material in assessing the operational status of gas-insulated equipment.

Emerging single-atom catalysts in the detection and purification of contaminated gases

Single atom catalysts (SACs) show exceptional molecular adsorption and electron transfer capabilities owing to their remarkable atomic efficiency and tunable electronic structure, thereby providing promising solutions for diverse important processes including photocatalysis, electrocatalysis, thermal catalysis, etc. Consequently, SACs hold great potential in the detection and degradation of pollutants present in contaminated gases. Over the past few years, SACs have made remarkable achievements in the field of contaminated gas detection and purification. In this review, we first provide a concise introduction to the significance and urgency of gas detection and pollutant purification, followed by a comprehensive overview of the structural feature identification methods for SACs. Subsequently, we systematically summarize the three key properties of SACs for detecting contaminated gases and discuss the research progress made in utilizing SACs to purify polluted gases. Finally, we analyze the enhancement mechanism and advantages of SACs in polluted gas detection and purification, and propose strategies to address challenges and expedite the development of SACs in polluted gas detection and purification.

Room-temperature highly sensitive triethylamine detection by few-layer Nb2CTxMXene nanosheets

MXene, a class of two-dimensional materials that are emerging as rising stars in the field of materials, are receiving much attention in sensing. Ti3C2TxMXene, the most maturely researched MXene, is widely used in energy, biomedical, laser, and microwave shielding applications and has also been expanded to gas sensing and wearable electronics applications. Compared with Ti3C2Tx, Nb2CTxMXene is more difficult to etch and has higher resistances at room temperature; so, few studies have been reported on their use in the sensing field. Based on the preparation of few-layer Nb2CTxMXene by intercalation, this study thoroughly examined their gas-sensing properties. The successfully prepared few-layer Nb2CTxshowed good selectivity and high sensitivity to triethylamine at room temperature, with response values up to 47.2% for 50 ppm triethylamine and short response/recovery time (22/20 s). This study opens an important path for the design of novel Nb-based MXene sensors for triethylamine gas detection.

Functionalized Multiwalled Carbon Nanotubes for Highly Stable Room Temperature and Humidity-Tolerant Triethylamine Sensing

Triethylamine (TEA) poses a significant threat to our health and is extremely difficult to detect at the parts-per-billion (ppb) level at room temperature. Carbon nanotubes (CNTs) are versatile materials used in chemiresistive vapor sensing. However, achieving high sensitivity and selectivity with a low detection limit remains a challenge for pristine CNTs, hindering their widespread commercial application. To address these issues, we propose functionalized multiwalled CNTs (MWCNTs) with carboxylic acid (COOH)-based sensing channels for ultrasensitive TEA detection under ambient conditions. Advanced structural analyses confirmed the necessary modification of MWCNTs after functionalization. The sensor exhibited excellent sensitivity to TEA in air, with a superior noise-free signal (10 ppb), an extremely low limit of detection (LOD ≈ 0.8 ppb), excellent repeatability, and long-term stability under ambient conditions. Moreover, the response values became more stable, demonstrating excellent humidity resistance (40-80% RH). Notably, the functionalized MWCNT sensor exhibited improved response and recovery kinetics (200 and 400 s) to 10 ppm of TEA compared to the pristine MWCNT sensor (400 and 1300 s), and the selectivity coefficient for TEA gas was improved by approximately three times against various interferants, including ammonia, formaldehyde, nitrogen dioxide, and carbon monoxide. The remarkable improvements in TEA detection were mainly associated with the large specific surface area, abundant active sites, adsorbed oxygen, and other defects. The sensing mechanism was thoroughly explained by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and gas chromatography-mass spectrometry (GC-MS). This study provides a new platform for CNT-based chemiresistive sensors with high selectivity, low detection limits, and enhanced precision with universal potential for applications in food safety and environmental monitoring.

Phase-Dependent Dual Discrimination of MoSe2/MoO3 Composites Toward N,N-Dimethylformamide and Triethylamine at Room Temperature

Herein, we present, a chemiresistive-type gas sensor composed of two-dimensional 1T-2H phase MoSe2 and MoO3. Mixed phase MoSe2 and MoSe2/MoO3 composites were synthesized via a facile hydrothermal method. The structure analysis using X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy revealed the formation of different phases of MoSe2 at different temperatures. With increase in synthesis temperature from 180 to 200 °C, the relative percentage of 1T and 2H-MoSe2 phases changed from 80 to 48%. On the other hand, at 220 °C, 2H-MoSe2 was obtained as a major component. The gas sensing properties of individual MoSe2 and composites were investigated at room temperature toward various analytes. The obtained results revealed that composites possess improved sensing features as compared with individual MoSe2 or MoO3. Data also revealed that the composite with dominating 1T-phase exhibits relatively higher response (10%, at 10 ppm) for dimethylformamide (DMF) compared to triethylamine (TEA) (3%, at 10 ppm). In contrast, the composite with larger 2H-phase exhibited affinity toward TEA and had a relative response of about 2%. Therefore, selectivity of a sensor device can be tuned by an appropriately designed MoSe2/MoO3 composite. These results signify the importance of MoO3-based composites with dual-phase MoSe2 for successfully discriminating between DMF and TEA at room-temperature.

Anchoring Pt Particles onto Mesoporousized ZnO Holey Cubes for Triethylamine Detection with Multifaceted Superiorities

Designing sensing materials with integrating unique spatial structures, functional units, and surface activity is vital to achieve high-performance gas sensor toward triethylamine (TEA) detection. Herein, a simple spontaneous dissolution is used with subsequent thermal decomposition strategy to fabricate mesoporousized ZnO holey cubes. The squaric acid is crucial to coordinate Zn2+ to form a cubic shape (ZnO-0) and then tailor the inner part to open a holey cube with simultaneously mesoporousizing the left cubic body (ZnO-72). To enhance the sensing performance, the mesoporous ZnO holey cubes have been functionalized with catalytic Pt nanoparticles, which deliver superior performances including high response, low detection limit, and fast response and recovery time. Notably, the response of Pt/ZnO-72 towards 200 ppm TEA is up to 535, which is much higher than those of 43 and 224 for pristine ZnO-0 and ZnO-72. A synergistic mechanism combining the intrinsic merits of ZnO, its unique mesoporous holey cubic structure, the oxygen vacancies, and the catalytic sensitization effect of Pt has been proposed for the significant enhancement in TEA sensing. Our work provides an effective facile approach to fabricate an advanced micro-nano architecture with manipulating its spatial structure, functional units, and active mesoporous surface for promising TEA gas sensors.

Selective Oxidation of Triethylamine Catalyzed by Mn-Ce/ZSM-5

The selective catalytic oxidation (SCO) of triethylamine (TEA) to harmless nitrogen (N₂), carbon dioxide (CO₂), and water (H₂O) is of green elimination technology. In this paper, Mn-Ce/ZSM-5 with different proportions of MnO_x/CeO_x were studied for the selective catalytic combustion of TEA. The catalysts were characterized by XRD, BET, H₂-TPR, XPS, and NH₃-TPD and their catalytic activities were analyzed. The results showed that MnO_x was the main active component. The addition of a small amount of CeO_x promotes the generation of high-valence Mn ions, which reduces the reduction temperature of the catalyst and increases the redox capacity of the catalyst. In addition, the synergistic effect between CeO_x and MnO_x significantly improves the mobility of reactive oxygen species on the catalyst, thus improving the catalytic performance of the catalyst. The catalytic oxidation performance of TEA over 15Mn5Ce/ZSM-5 is the highest. TEA can be completely converted at 220 °C, and the selectivity for N₂ is up to 80%. The reaction mechanism was studied by in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS).

ZnO Nanorod-Immobilized Pt Single-Atoms as an Ultrasensitive Sensor for Triethylamine Detection

Triethylamine (TEA) is a flammable and highly toxic gas, and the fast, accurate, and sensitive detection of gas TEA remains greatly challenging. Herein, we report a ZnO nanorod anchored with a single-atom Pt catalyst (Pt₁/ZnO) as a gas sensor for TEA detection. The sensor shows high selectivity and high response to gas TEA with a response value of 4170 at 200 °C, which is 92 times higher than that of pure ZnO. Moreover, the Pt₁/ZnO sensor has very short response and recovery times of only 34 and 76 s, respectively, and also has a high response to ppb-level TEA gas (100 ppb-21.6). The gas-sensing enhancement mechanism of the Pt₁/ZnO sensor to gas TEA was systematically investigated using band structure analysis, in situ diffuse reflectance infrared Fourier transformation spectroscopy, and density functional theory calculations. The results show that the oxygen vacancies on Pt₁/ZnO can effectively activate the adsorbed oxygen. Moreover, chemical bonds can be formed between Pt single atoms and N atoms in TEA to achieve effective adsorption and activation of TEA molecules, facilitating the reaction between TEA and the adsorbed oxygen on Pt₁/ZnO, and thereby obtaining high gas-sensing performance. This work highlights the crucial role of Pt single-atom in improving the sensing performance for gas TEA detection, paving the way for developing more advanced gas sensors.

Pd-SnO2/In2O3 with a Unique Structure for the Ultrasensitive Detection of Triethylamine near Room Temperature

Triethylamine (TEA) is a serious threat to people's health, and it is still a challenge to detect TEA at ppb level near room temperature (RT). Herein, we developed a simple, low-cost, low-temperature, and ultra-sensitive TEA sensor based on Pd-SnO₂/In₂O₃ composites. First, SnO₂ nanoparticles were obtained by the pyrolysis of Sn-MOF@SnO₂ precursor (MOF: metal organic framework), and Pd-SnO₂/In₂O₃ composites were prepared by further compounding and doping. The results show that the Pd-SnO₂/In₂O₃ sensor is highly sensitive to TEA gas at near RT (at 60 °C, the sensor response to 10 ppm TEA is 12,000, the response/recovery (res/rec) time is 51 s/493 s, and at 30 °C, the response value also reaches 1380, the res/rec time is 66 s/610 s), along with good selectivity, stability, and moisture resistance. Even at 10 °C operating temperature and 75% relative humidity (RH) in a low-temperature and high-humidity environment, it still maintains a high sensitivity of over 1000 to 10 ppm TEA, which shows great application potential in TEA detection. The reason for the enhanced performance of the 0.5%Pd-SnO₂/In₂O₃ sensor can be attributed to a large number of adsorbed oxygens on the unique structure of the material, the good charge transfer ability of the n-n-type heterojunction between SnO₂ and In₂O₃, the chemical sensitization and electronic sensitization of Pd nanoparticles, and the catalytic spillover effect. This work will provide a new approach for preparing sensors with good comprehensive properties, making full use of the advantages of the material structure-activity relationship.

Conductometric ppb-Level CO Sensors Based on In2O3 Nanofibers Co-Modified with Au and Pd Species

Carbon monoxide (CO) is one of the most toxic gases to human life. Therefore, the effective monitoring of it down to ppb level is of great significance. Herein, a series of In₂O₃ nanofibers modified with Au or Pd species or simultaneous Au and Pd species have been prepared by electrospinning combined with a calcination process. The as-obtained samples are applied for the detection of CO. Gas-sensing investigations indicate that 2 at% Au and 2 at% Pd-co-modified In₂O₃ nanofibers exhibit the highest response (21.7) to 100 ppm CO at 180 °C, and the response value is ~8.5 times higher than that of pure In₂O₃ nanofibers. More importantly, the detection limit to CO is about 200 ppb with a response value of 1.23, and is obviously lower than that (6 ppm) of pure In₂O₃ nanofibers. In addition, the sensor also shows good stability within 19 days. These demonstrate that co-modifying In₂O₃ nanofibers with suitable amounts of Pd and Au species might be a meaningful strategy for the development of high-performance carbon monoxide gas sensors.

Metasurfaces for Sensing Applications: Gas, Bio and Chemical

Performance of photonic devices critically depends upon their efficiency on controlling the flow of light therein. In the recent past, the implementation of plasmonics, two-dimensional (2D) materials and metamaterials for enhanced light-matter interaction (through concepts such as sub-wavelength light confinement and dynamic wavefront shape manipulation) led to diverse applications belonging to spectroscopy, imaging and optical sensing etc. While 2D materials such as graphene, MoS₂ etc., are still being explored in optical sensing in last few years, the application of plasmonics and metamaterials is limited owing to the involvement of noble metals having a constant electron density. The capability of competently controlling the electron density of noble metals is very limited. Further, due to absorption characteristics of metals, the plasmonic and metamaterial devices suffer from large optical loss. Hence, the photonic devices (sensors, in particular) require that an efficient dynamic control of light at nanoscale through field (electric or optical) variation using substitute low-loss materials. One such option may be plasmonic metasurfaces. Metasurfaces are arrays of optical antenna-like anisotropic structures (sub-wavelength size), which are designated to control the amplitude and phase of reflected, scattered and transmitted components of incident light radiation. The present review put forth recent development on metamaterial and metastructure-based various sensors.

CsPbBr3-Based Nanostructures for Room-Temperature Sensing of Volatile Organic Compounds

All-inorganic halide perovskites, as a dominant member of the perovskite family, have been proven to be excellent semiconductors due to the great successes for solar cells, light-emitting diodes, photodetectors, and nanocrystal photocatalysts. Despite the remarkable advances in those fields, there are few research studies focusing on gas and humidity-sensing performances, especially for pure CsPbBr₃ and heterogeneous CsPbBr₃@MoS₂ composites. Here, we first report a valuable CsPbBr₃ sensor prepared by electrospinning, and the excellent gas sensing performances are investigated. The CsPbBr₃ sensor can quickly and effectively detect ethanolamine at room temperature. The response time is only 16 s, and the response to 100 ppm ethanolamine is as high as 29.87, besides the excellent repeatability and good stability. The theoretical detection limit is estimated to be 21 ppb. Furthermore, considering the irreplaceable role of heterostructures in regulating the electronic structure and supporting rich reaction boundaries, we also actively explored the EA sensitivity of inorganic CsPbBr₃-based heterogeneous composites CsPbBr₃@MoS₂. At the same time, the roles of the critical capping agents OA and OAm are systematically investigated. This work demonstrates the great potential of all-inorganic halide perovskites in promising volatile organic compound detection.

Metal Oxide Semiconductor Sensors for Triethylamine Detection: Sensing Performance and Improvements

Triethylamine (TEA) is an organic compound that is commonly used in industries, but its volatile, inflammable, corrosive, and toxic nature leads to explosions and tissue damage. A sensitive, accurate, and in situ monitoring of TEA is of great significance to production safety and human health. Metal oxide semiconductors (MOSs) are widely used as gas sensors for volatile organic compounds due to their high bandgap and unique microstructure. This review aims to provide insights into the further development of MOSs by generalizing existing MOSs for TEA detection and measures to improve their sensing performance. This review starts by proposing the basic gas-sensing characteristics of the sensor and two typical TEA sensing mechanisms. Then, recent developments to improve the sensing performance of TEA sensors are summarized from different aspects, such as the optimization of material morphology, the incorporation of other materials (metal elements, conducting polymers, etc.), the development of new materials (graphene, TMDs, etc.), the application of advanced fabrication devices, and the introduction of external stimulation. Finally, this review concludes with prospects for using the aforementioned methods in the fabrication of high-performance TEA gas sensors, as well as highlighting the significance and research challenges in this emerging field.

Chemical Discrimination of Benzene Series and Molecular Recognition of the Sensing Process over Ti-Doped Co3O4

This work achieved the chemical discrimination of benzene series (toluene, xylene isomers, and ethylbenzene gases) based on the Ti-doped Co₃O₄ sensor. Benzene series gases presented different gas-response features due to the differences in redox rate on the surface of the Ti-doped Co₃O₄ sensor, which created an opportunity to discriminate benzene series via the algorithm analysis. Excellent groupings were obtained via the principal component analysis. High prediction accuracies were acquired via k-nearest neighbors, linear discrimination analysis (LDA), and support vector machine classifiers. With the confusion matrix for the data set using the LDA classifier, the benzene series have been well classified with 100% accuracy. Furthermore, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory calculations were conducted to investigate the molecular gas-solid interfacial sensing mechanism. Ti-doped Co₃O₄ showed strong Lewis acid sites and adsorption capability toward reaction species, which benefited the toluene gas-sensing reaction and resulted in the highly boosted gas-sensing performance. Our research proposed a facile distinction methodology to recognize similar gases and provided new insights into the recognition of gas-solid interfacial sensing mechanisms.