Self-Healable and Stretchable Ionic-Liquid-Based Thermoelectric Composites with High Ionic Seebeck Coefficient

A Highly Robust, Multifunctional, and Breathable Bicomponent Fibers Thermoelectric Fabric for Dual-Mode Sensing

Wearable thermoelectric (TE) materials are seen as excellent candidates for flexible electronics because of their unique self-powered properties, multistimulus sensing and human waste heat conversion. However, currently reported flexible TE materials still face challenges such as poor durability, uncomfortable wearing and sensing signals crosstalking each other. Herein, this study describes a hot-air cross-linking method for the preparation of multifunctional TE fabrics with enhanced durability. Poly(ethylene terephthalate) (PET) fibers with core and sheath structures having different melting points were selected as flexible substrates. Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and single-walled carbon nanotubes (SWCNTs) were embedded stably on the surface of the sheath layer in the presence of heat treatment. The fiber-welded structure created by thermal cross-linking improves the durability of TE fabrics, including consistent mechanical and electrical properties after a 6 h wash test and 6000 compression cycles. The unique fiber structure of TE fabrics ensures excellent breathability (313.7 mm s-1 at 200 Pa), which meets the breathability requirements for human wear. In addition, the fiber-prepared sensors have excellent compressive strain response (20 ms response time and 30 ms recovery time) and precise temperature discrimination (0.17 K minimum discrimination temperature) for accurate real-time monitoring of the sensed signals. Thus, the TE fabrics can be used for human motion recognition, including pulse monitoring, sign language expression, and motions in joint areas. Moreover, the fabricated wearable TE device is connected to a Bluetooth module for wireless transmission, which can be used for mechanical and temperature sensing of the robot arm without signals crosstalking. This new durable TE fabric paves the way for the next generation of smart wearable technology.

Intricate Ionic Behaviors in High-Performance Self-Powered Hydrothermal Chemical Generator Using Water and Iron (III) Gate

Utilizing the ionic flux to generate voltage output has been confirmed as an effective way to meet the requirements of clean energy sources. Different from ionic thermoelectric (i-TE) and hydrovoltaic devices, a new hydrothermal chemical generator is designed by amorphous FeCl3 particles dispersing in MWCNT and unique ferric chloride or water gate. In the presence of gate, the special ion behaviors enable the cell to present a constant voltage of 0.60 V lasting for over 96 h without temperature difference. Combining the differences of cation concentration, humidity and temperature between the right and left side of sample, the maximum short-circuit current and power output can be obtained to 168.46 µA and 28.11 µW, respectively. The generator also can utilize the low-grade heat to produce electricity wherein Seebeck coefficient is 6.79 mV K-1. The emerged hydrothermal chemical generator offers a novel approach to utilize the low-grade heat, water and salt solution resources, which provides a simple, sustainable and low-cost strategy to realize energy supply.

Metal-Halogen Interactions Inducing Phase Separation for Self-Healing and Tough Ionogels with Tunable Thermoelectric Performance

Ionic liquid-based thermoelectric gels become a compelling candidate for thermoelectric power generation and sensing due to their giant thermopower, good thermal stability, high flexibility, and low-cost production. However, the materials reported to date suffer from canonical trade-offs between self-healing ability, stretchability, strength, and ionic conductivity. Herein, a self-healing and tough ionogel (PEO/LiTFSI/EmimCl) with tunable thermoelectric properties by tailoring metal-halogen bonding interactions, is developed. Different affinities between polymer matrix and salts are exploited to induce phase separation, resulting in simultaneous enhancement of ionic conductivity and mechanical strength. Molecular dynamics (MD) simulations and spectroscopic analyses show that Cl- ions impair the lithium-ether oxygen coordination, leading to changes in chain conformation. The migration difference between cations and anions is thus widened and a transition from n-type to p-type thermoelectric ionogels is realized. Furthermore, the dynamic interactions of metal-ligand coordination and hydrogen bonding yield autonomously self-healing capability, large stretchability (2000%), and environment-friendly recyclability. Benefiting from these fascinating properties, the multifunctional PEO-based ionogels are applied in sensors, supercapacitors, and thermoelectric power generation modules. The strategy of tuning solvation dominance to address the trade-offs in thermoelectric ionogels and optimize their macroscopic properties offers new possibilities for the design of advanced ionogels.

Ionic Thermoelectric Generators in Vertical and Planar Topologies Based on Fluorinated Polymer Hybrid Materials with Ionic Liquids

Ionic thermoelectrics (TEs), in which voltage generation is based on ion migration, are suitable for applications based on their low cost, high flexibility, high ionic conductivity, and wide range of Seebeck coefficients. This work reports on the development of ionic TE materials based on the poly(vinylidene fluoride-trifluoroethylene), Poly(VDF-co-TrFE), as host polymer blended with different contents of the ionic liquid, IL, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The morphology, physico-chemical, thermal, mechanical, and electrical properties of the samples are evaluated together with the TE response. It is demonstrated that the IL acts as a nucleating agent for polymer crystallization. The mechanical properties and ionic conductivity values are dependent on the IL content. A high room temperature ionic conductivity of 0.008 S cm-1 is obtained for the sample with 60 wt% of [EMIM][TFSI] IL. The TE properties depend on both IL content and device topology-vertical or planar-the largest generated voltage range being obtained for the planar topology and the sample with 10 wt% of IL content, characterized by a Seebeck coefficient of 1.2 mV K-1. Based on the obtained maximum power density of 4.9 µW m-2, these materials are suitable for a new generation of TE devices.

Developing Air-Stable n-Type SWCNT-Based Composites with High Thermoelectric and Robust Mechanical Properties for Wearable Electronics

Flexible organic thermoelectric generators are gaining prominence in wearable electronics, leveraging body heat as an energy source. Their advancement is hindered by the scarcity of air-stable n-type organic materials with robust mechanical properties. This study introduces two new polymers (HDCN4 and HDCN8), created through polycondensation of paraformaldehyde and diamine-terminated poly(ethylene glycol) (PEGDA) with molecular weights of 4000 and 8000 g/mol into single-walled carbon nanotubes (SWCNTs). The resulting HDCN4/SWCNT and HDCN8/SWCNT composites show impressive power factors of 225.9 and 108.2 μW m-1 K-2, respectively, and maintain over 90% in air for over four months without encapsulation. The HDCN4/SWCNT composite also demonstrates significant tensile strength (33.2 MPa) and flexibility (up to 10% strain), which is currently the best mechanically n-type thermoelectric material with such a high power factor reported in the literature. A thermoelectric device based on HDCN4/SWCNT generates 4.2 μW of power with a 50 K temperature difference. Additionally, when used in wearable temperature sensors, these devices exhibit high mechanical reliability and a temperature resolution of 0.1 K. This research presents a viable method to produce air-stable n-type thermoelectric materials with excellent performance and mechanical properties.

The enhanced ionic thermal potential by a polarized electrospun membrane

Inspired by thermally sensitive ion channels in human skin, a polarized membrane composed of a ferroelectric polymer fiber matrix is used to double the heat-induced potential in ionic thermoelectric devices. The comparison of the thermal potentials between different directions of polarization and temperature gradient indicates the importance of cation-dipole interactions for the enhancement.

Solvation Engineering via Fluorosurfactant Additive Toward Boosted Lithium-Ion Thermoelectrochemical Cells

Lithium-ion thermoelectrochemical cell (LTEC), featuring simultaneous energy conversion and storage, has emerged as promising candidate for low-grade heat harvesting. However, relatively poor thermosensitivity and heat-to-current behavior limit the application of LTECs using LiPF6 electrolyte. Introducing additives into bulk electrolyte is a reasonable strategy to solve such problem by modifying the solvation structure of electrolyte ions. In this work, we develop a dual-salt electrolyte with fluorosurfactant (FS) additive to achieve high thermopower and durability of LTECs during the conversion of low-grade heat into electricity. The addition of FS induces a unique Li+ solvation with the aggregated double anions through a crowded electrolyte environment, resulting in an enhanced mobility kinetics of Li+ as well as boosted thermoelectrochemical performances. By coupling optimized electrolyte with graphite electrode, a high thermopower of 13.8 mV K-1 and a normalized output power density of 3.99 mW m-2 K-2 as well as an outstanding output energy density of 607.96 J m-2 can be obtained. These results demonstrate that the optimization of electrolyte by regulating solvation structure will inject new vitality into the construction of thermoelectrochemical devices with attractive properties.

Exceptional n-type thermoelectric ionogels enabled by metal coordination and ion-selective association

Ionic liquid-based ionogels emerge as promising candidates for efficient ionic thermoelectric conversion due to their quasi-solid state, giant thermopower, high flexibility, and good stability. P-type ionogels have shown impressive performance; however, the development of n-type ionogels lags behind. Here, an n-type ionogel consisting of polyethylene oxide (PEO), lithium salt, and ionic liquid is developed. Strong coordination of lithium ion with ether oxygen and the anion-rich clusters generated by ion-preferential association promote rapid transport of the anions and boost Eastman entropy change, resulting in a huge negative ionic Seebeck coefficient (-15 millivolts per kelvin) and a high electrical conductivity (1.86 millisiemens per centimeter) at 50% relative humidity. Moreover, dynamic and reversible interactions among the ternary mixtures endow the ionogel with fast autonomous self-healing capability and green recyclability. All PEO-based ionic thermoelectric modules are fabricated, which exhibits outstanding thermal responses (-80 millivolts per kelvin for three p-n pairs), demonstrating great potential for low-grade energy harvesting and ultrasensitive thermal sensing.

Self-healable polymer complex with a giant ionic thermoelectric effect

In this study, we develop a stretchable/self-healable polymer, PEDOT:PAAMPSA:PA, with remarkably high ionic thermoelectric (iTE) properties: an ionic figure-of-merit of 12.3 at 70% relative humidity (RH). The iTE properties of PEDOT:PAAMPSA:PA are optimized by controlling the ion carrier concentration, ion diffusion coefficient, and Eastman entropy, and high stretchability and self-healing ability are achieved based on the dynamic interactions between the components. Moreover, the iTE properties are retained under repeated mechanical stress (30 cycles of self-healing and 50 cycles of stretching). An ionic thermoelectric capacitor (ITEC) device using PEDOT:PAAMPSA:PA achieves a maximum power output and energy density of 4.59 μW‧m-2 and 1.95 mJ‧m-2, respectively, at a load resistance of 10 KΩ, and a 9-pair ITEC module produces a voltage output of 0.37 V‧K-1 with a maximum power output of 0.21 μW‧m-2 and energy density of 0.35 mJ‧m-2 at 80% RH, demonstrating the potential for a self-powering source.

Fluorescent double network ionogels with fast self-healability and high resilience for reliable human motion detection

Fascinating properties are displayed by high-performance ionogel-based flexible strain sensors, thereby gaining increasing attention in various applications ranging from human motion monitoring to soft robotics. However, the integration of excellent properties such as optical and mechanical properties and satisfactory sensing performance for one ionogel sensor is still a challenge. In particular, fatigue-resistant and self-healing properties are essential to continuous sensing. Herein, we design a flexible ion-conductive sensor based on a multifunctional ionogel with a double network using polyacrylamide, amino-modified agarose, 1,3,5-benzenetricarboxaldehyde and 1-ethyl-3-methylimidazolium chloride. The ionogel exhibits comprehensive properties including high transparency (>95%), nonflammability, strong adhesion and good temperature tolerance (about -96 to 260 °C), especially adaptive for extreme conditions. The dynamic imine bonds and abundant hydrogen bonds endow the ionogel with excellent self-healing capability, to realize rapid self-repair within minutes, as well as good mechanical properties and ductility to dissipate input energy and realize high resilience. Notably, unexpected fluorescence has been observed for the ionogel because of the gelation-induced emission phenomenon. Flexible strain sensors prepared directly from ionogels can sensitively monitor and differentiate various human motions, exhibiting a fast response time (38 ms), high sensitivity (gauge factor = 3.13 at 800% strain), good durability (>1000 cycles) and excellent stability over a wide temperature range (-30 to 80 °C). Therefore, the prepared ionogel as a high-performance flexible strain sensor in this study shows tremendous potential in wearable devices and soft ionotronics.

Soret Effect of Ionic Liquid Gels for Thermoelectric Conversion

Cations and anions can accumulate at the two ends of an ionic conductor under temperature gradient, which is the so-called Soret effect. This can generate a voltage between the two electrodes, and the thermopower can be higher than that of the electronic conductors because of the Seebeck effect by 1-2 orders in magnitude. The thermoelectric properties of ionic conductors depend on the ionic thermopower, ionic conductivity, and thermal conductivity. Compared with other ionic conductors, like liquid electrolytes and hydrogels, ionogels made of an ionic liquid and a gelator can have the advantages of high thermopower and high stability. Great progress was recently made to improve the ionic conductivity and/or ionic thermopower of ionogels. They can be used in ionic thermoelectric capacitors (ITECs) to harvest heat. In addition, they can be integrated with electronic thermoelectric materials to harvest heat from both temperature gradient and temperature fluctuation, which can be caused by waste heat.

Intrinsically Self-Healable and Wearable All-Organic Thermoelectric Composite with High Electrical Conductivity for Heat Harvesting

The development of wearable electronics has led to the growing demand for the self-powered and maintenance-free power sources. Under these circumstances, thermoelectric generators are considered promising candidates, which can directly convert body heat into electricity to power wearable electronics. However, most of the thermoelectric materials are either brittle or unrecoverable under external physical damage. It is urgent to develop thermoelectric materials that possess both stretchability and intrinsic self-healing property, and the remaining challenge is to combine the high mechanical robustness and excellent electrical conductivity. Herein, a self-healing and wearable all-organic thermoelectric composite is reported. The composite film exhibits high electrical conductivity of 238 S cm^-1, high flexibility of up to 119% strain, and a maximum tensile strength of 23 MPa. When the composite film is subjected to external physical damage, most functionalities can be maintained after self-healing, 78% recovery in electrical conductivity, and 80% recovery in tensile strength. Using the self-healing composite, we fabricated a thermoelectric generator with a power output of 85.5 nW at a temperature difference of 48 K, which is a significant advance over the recently reported thermoelectric generators based on intrinsic self-healing thermoelectric materials. This work represents a crucial step toward achieving intrinsic self-healing all-organic thermoelectric materials with high electrical conductivity.

Multi-ionic Hydrogel with outstanding heat-to-electrical performance for low-grade heat harvesting

Ionic thermoelectric (i-TE) materials have attracted much attention due to their ability to generate ionic Seebeck coefficient of tens of millivolts per Kelvin. In this work, we demonstrate that the ionic thermopower can be enhanced by the introduction of multiple ions. The multi-ionic hydrogel possesses a record thermal-to-electrical energy conversion factor (TtoE factor) of 89.6 mV K-1 and an ionic conductivity of 6.8 mS cm-1, which are both better than single salt contact hydrogel. Subsequently we build a model to explain thermal diffusion of the ions in multi-ionic hydrogels. Finally, the possibility of large-scale integrated applications of multi-ionic hydrogels is demonstrated. By connecting 7 i-TEs hydrogels, we obtained an open-circuit voltage of 1.86 V at ΔT = 3 K. Our work provides a new pathway for the design of i-TEs and low-grade heat harvesting.