3D Bioprinted GelMA-Nanoclay Hydrogels Induce Colorectal Cancer Stem Cells Through Activating Wnt/β-Catenin Signaling

PSO/SDF-1 composite hydrogel promotes osteogenic differentiation of PDLSCs and bone regeneration in periodontitis rats

Periodontitis is an inflammatory disease characterized by the destruction of periodontal tissues, and the promotion of bone tissue regeneration is the key to curing periodontitis. Psoralen is the main component of Psoralea corylifolia Linn, and has multiple biological effects, including anti-osteoporosis and osteogenesis. We constructed a novel hydrogel loaded with psoralen (PSO) and stromal cell-derived factor-1 (SDF-1) for direct endogenous cell homing. This study aimed to evaluate the synergistic effects of PSO/SDF-1 on periodontal bone regeneration in patients with periodontitis. The results of CCK8, alkaline phosphatase (ALP) activity assay, and Alizarin Red staining showed that PSO/SDF-1 combination treatment promoted cell proliferation, chemotaxis ability, and ALP activity of PDLSCs. qRT-PCR and western blotting showed that the expression levels of alkaline phosphatase (ALP), dwarf-associated transcription factor 2 (RUNX2), and osteocalcin (OCN) gene were upregulated. Rat periodontal models were established to observe the effect of local application of the composite hydrogel on bone regeneration. These results proved that the PSO/SDF-1 combination treatment significantly promoted new bone formation. The immunohistochemical (IHC) results confirmed the elevated expression of ALP, RUNX2, and OCN osteogenic genes. PSO/SDF-1 composite hydrogel can synergistically regulate the biological function and promote periodontal bone formation. Thus, this study provides a novel strategy for periodontal bone regeneration.

A patient-specific lung cancer assembloid model with heterogeneous tumor microenvironments

Cancer models play critical roles in basic cancer research and precision medicine. However, current in vitro cancer models are limited by their inability to mimic the three-dimensional architecture and heterogeneous tumor microenvironments (TME) of in vivo tumors. Here, we develop an innovative patient-specific lung cancer assembloid (LCA) model by using droplet microfluidic technology based on a microinjection strategy. This method enables precise manipulation of clinical microsamples and rapid generation of LCAs with good intra-batch consistency in size and cell composition by evenly encapsulating patient tumor-derived TME cells and lung cancer organoids inside microgels. LCAs recapitulate the inter- and intratumoral heterogeneity, TME cellular diversity, and genomic and transcriptomic landscape of their parental tumors. LCA model could reconstruct the functional heterogeneity of cancer-associated fibroblasts and reflect the influence of TME on drug responses compared to cancer organoids. Notably, LCAs accurately replicate the clinical outcomes of patients, suggesting the potential of the LCA model to predict personalized treatments. Collectively, our studies provide a valuable method for precisely fabricating cancer assembloids and a promising LCA model for cancer research and personalized medicine.

3D Bioprinting: An Important Tool for Tumor Microenvironment Research

The tumor microenvironment plays a crucial role in cancer development and treatment. Traditional 2D cell cultures fail to fully replicate the complete tumor microenvironment, while mouse tumor models suffer from time-consuming procedures and complex operations. However, in recent years, 3D bioprinting technology has emerged as a vital tool in studying the tumor microenvironment. 3D bioprinting is a revolutionary biomanufacturing technique that involves layer-by-layer stacking of biological materials, such as cells and biomaterial scaffolds, to create highly precise 3D biostructures. This technology enables the construction of intricate tissue and organ models in the laboratory, which are utilized for biomedical research, drug development, and personalized medicine. The application of 3D bioprinting has brought unprecedented opportunities to fields such as cancer research, tissue engineering, and organ transplantation. It has opened new possibilities for addressing real-world biological challenges and improving medical treatment outcomes. This review summarizes the applications of 3D bioprinting technology in the context of the tumor microenvironment, aiming to explore its potential impact on cancer research and treatment. The use of this cutting-edge technology promises significant advancements in understanding cancer biology and enhancing medical interventions.

Current Biomedical Applications of 3D-Printed Hydrogels

Three-dimensional (3D) printing, also known as additive manufacturing, has revolutionized the production of physical 3D objects by transforming computer-aided design models into layered structures, eliminating the need for traditional molding or machining techniques. In recent years, hydrogels have emerged as an ideal 3D printing feedstock material for the fabrication of hydrated constructs that replicate the extracellular matrix found in endogenous tissues. Hydrogels have seen significant advancements since their first use as contact lenses in the biomedical field. These advancements have led to the development of complex 3D-printed structures that include a wide variety of organic and inorganic materials, cells, and bioactive substances. The most commonly used 3D printing techniques to fabricate hydrogel scaffolds are material extrusion, material jetting, and vat photopolymerization, but novel methods that can enhance the resolution and structural complexity of printed constructs have also emerged. The biomedical applications of hydrogels can be broadly classified into four categories-tissue engineering and regenerative medicine, 3D cell culture and disease modeling, drug screening and toxicity testing, and novel devices and drug delivery systems. Despite the recent advancements in their biomedical applications, a number of challenges still need to be addressed to maximize the use of hydrogels for 3D printing. These challenges include improving resolution and structural complexity, optimizing cell viability and function, improving cost efficiency and accessibility, and addressing ethical and regulatory concerns for clinical translation.

Biomimetic Hydrogels as the Inductive Endochondral Ossification Template for Promoting Bone Regeneration

Repairing critical size bone defects (CSBD) is a major clinical challenge and requires effective intervention by biomaterial scaffolds. Inspired by the fact that the cartilaginous template-based endochondral ossification (ECO) process is crucial to bone healing and development, developing biomimetic biomaterials to promote ECO is recognized as a promising approach for repairing CSBD. With the unique highly hydrated 3D polymeric network, hydrogels can be designed to closely emulate the physiochemical properties of cartilage matrix to facilitate ECO. In this review, the various preparation methods of hydrogels possessing the specific physiochemical properties required for promoting ECO are introduced. The materiobiological impacts of the physicochemical properties of hydrogels, such as mechanical properties, topographical structures and chemical compositions on ECO, and the associated molecular mechanisms related to the BMP, Wnt, TGF-β, HIF-1α, FGF, and RhoA signaling pathways are further summarized. This review provides a detailed coverage on the materiobiological insights required for the design and preparation of hydrogel-based biomaterials to facilitate bone regeneration.

Nanocomposite Hydrogels and Extracellular Matrix-Advantages and Associated Risks

Hydrogels can be considered as mimics of the extracellular matrix (ECM). Through integrins, the cytoskeleton is connected to the ECM, and cytoskeleton tension depends on ECM stiffness. A number of age-related diseases depend on cellular processes related to cytoskeleton function. Some examples of cancer initiation and progression and heart disease in relation to ECM stiffness have been analyzed. The incorporation of rigid particles into the ECM can increase ECM stiffness and promote the formation of internal residual stresses. Water migration, changes in water binding energy to biomactomolecules, and changes in the state of water from tightly bound water to free and loosely bound water lead to changes in the stiffness of the ECM. Cardiac tissue engineering, ECM stiffness and cancer, the equivalence of ECM stiffness, oxidative stress, inflammation, multi-layer polyelectrolyte complex hydrogels and bioprinting, residual internal stresses, viscoelastic hydrogels, hydrogel nanocomposites, and the effect of water have been reported. Special attention has been paid to the role of bound water and internal stresses in ECM stiffness. The risks related to rigid particle incorporation into the ECM have been discussed. The potential effect of polyphenols, chitosan, and chitosan oligosaccharide on ECM stiffness and the potential for anti-TNF-α and anti-NF-κB therapies have been discussed.

Biomimetic Microenvironmental Stiffness Boosts Stemness of Pancreatic Ductal Adenocarcinoma via Augmented Autophagy

Pancreatic ductal adenocarcinoma (PDAC) features high recurrence rates and intensified lethality, accompanied by stiffening of the extracellular matrix (ECM) microenvironment, which is mainly due to the deposition, remodeling, and cross-linking of collagen. Boosted stemness plays an essential role during occurrence and progression, which indicates a poor prognosis. Therefore, it is of great importance to understand the effect of the underlying interaction of matrix stiffness and stemness on PDAC. For this purpose, a methacrylated gelatin (GelMA) hydrogel with tunable stiffness was applied for incubating MIA PaCa-2 and PANC-1 cells. The results demonstrated that compared to the soft group (5% GelMA, w/v), the expression of stemness-related genes (SOX2, OCT4, and NANOG) in the stiff group (10% GelMA, w/v) displayed pronounced elevation as well as sphere formation. Intriguingly, we also observed that matrix stiffness regulated autophagy of PDAC, which played a momentous role in stemness promotion. In order to clarify the underlying relationship between matrix stiffness-mediated cell autophagy and stemness, rescue experiments with rapamycin and chloroquine were conducted with transmission electron microscopy, immunofluorescence staining, sphere formation, and qRT-PCR assays to evaluate the level of stemness and autophagy. For exploring the molecular mechanism in depth, RNA-seq and differential expression of miRNAs were carried out, which may sensor and respond to matrix stiffness during the regulation of stemness and autophagy. In conclusion, we validated that blocking autophagy repressed the stemness induced by matrix stiffness in PDAC and provided a potential therapeutic strategy for this aggressive cancer.

Gelatin Methacryloyl Hydrogel, from Standardization, Performance, to Biomedical Application

Gelatin methacryloyl (GelMA), a photocurable hydrogel, is widely used in 3D culture, particularly in 3D bioprinting, due to its high biocompatibility, tunable physicochemical properties, and excellent formability. However, as the properties and performances of GelMA vary under different synthetic conditions, there is a lack of standardization, leading to conflicting results. In this study, a uniform standard is established to understand and enhance GelMA applications. First, the basic concept of GelMA and the density of the molecular network (DMN) are defined. Second, two properties, degrees of substitution and ratio of solid content, as the main measurable parameters determining the DMN are used. Third, the mechanisms and relationships between DMN and its performance in various applications in terms of porosity, viscosity, formability, mechanical strength, swelling, biodegradation, and cytocompatibility are theoretically explained. The main questions that are answered: what does performance mean, why is it important, how to optimize the basic parameters to improve the performance, and how to characterize it reasonably and accurately? Finally, it is hoped that this knowledge will eliminate the need for researchers to conduct tedious and repetitive pre-experiments, enable easy communication for achievements between groups under the same standard, and fully explore the potential of the GelMA hydrogel.

3D-biofabricated chondrocyte-laden decellularized extracellular matrix-contained gelatin methacrylate auxetic scaffolds under cyclic tensile stimulation for cartilage regeneration

Three-dimensional (3D) hydrogel constructs can mimic features of the extracellular matrix (ECM) and have tailorable physicochemical properties to support and maintain the regeneration of articular cartilage. Various studies have shown that mechanical cues affect the cellular microenvironment and thereby influence cellular behavior. In this study, we fabricated an auxetic scaffold to investigate the effect of 3D tensile stimulation on chondrocyte behavior. Different concentrations of decellularized extracellular matrix (dECM) were mixed with fish gelatin methacrylate (FGelMa) and employed for the preparation of dECM/FGelMa auxetic bio-scaffolds using 3D biofabrication technology. We show that when human chondrocytes (HCs) were incorporated into these scaffolds, their proliferation and the expression of chondrogenesis-related markers increased with dECM content. The function of HC was influenced by cyclic tensile stimulation, as shown by increased production of the chondrogenesis-related markers, collagen II and glycosaminoglycans, with the involvement of the yes-associated protein 1 signaling pathway. The biofabricated auxetic scaffold represents an excellent platform for exploring interactions between cells and their mechanical microenvironment.

3D bioprinting of gastrointestinal cancer models: A comprehensive review on processing, properties, and therapeutic implications

Gastrointestinal tract (GIT) malignancies are an important public health problem considering the increased incidence in recent years and the high morbidity and mortality associated with it. GIT malignancies constitute 26% of the global cancer incidence burden and 35% of all cancer-related deaths. Gastrointestinal cancers are complex and heterogenous diseases caused by the interplay of genetic and environmental factors. The tumor microenvironment (TME) of gastrointestinal tract carcinomas is dynamic and complex; it cannot be recapitulated in the basic two-dimensional cell culture systems. In contrast, three-dimensional (3D) in vitro models can mimic the TME more closely, enabling an improved understanding of the microenvironmental cues involved in the various stages of cancer initiation, progression, and metastasis. However, the heterogeneity of the TME is incompletely reproduced in these 3D culture models, as they fail to regulate the orientation and interaction of various cell types in a complex architecture. To emulate the TME, 3D bioprinting has emerged as a useful technique to engineer cancer tissue models. Bioprinted cancer tissue models can potentially recapitulate cancer pathology and increase drug resistance in an organ-mimicking 3D environment. In this review, we describe the 3D bioprinting methods, bioinks, characterization of 3D bioprinted constructs, and their application in developing gastrointestinal tumor models that integrate their microenvironment with different cell types and substrates, as well as bioprinting modalities and their application in therapy and drug screening. We review prominent studies on the 3D bioprinted esophageal, hepatobiliary, and colorectal cancer models. In addition, this review provides a comprehensive understanding of the cancer microenvironment in printed tumor models, highlights current challenges with respect to their clinical translation, and summarizes future perspectives.

Advances in 3D Bioprinting for Cancer Biology and Precision Medicine: From Matrix Design to Application

The tumor microenvironment is highly complex owing to its heterogeneous composition and dynamic nature. This makes tumors difficult to replicate using traditional 2D cell culture models that are frequently used for studying tumor biology and drug screening. This often leads to poor translation of results between in vitro and in vivo and is reflected in the extremely low success rates of new candidate drugs delivered to the clinic. Therefore, there has been intense interest in developing 3D tumor models in the laboratory that are representative of the in vivo tumor microenvironment and patient samples. 3D bioprinting is an emerging technology that enables the biofabrication of structures with the virtue of providing accurate control over distribution of cells, biological molecules, and matrix scaffolding. This technology has the potential to bridge the gap between in vitro and in vivo by closely recapitulating the tumor microenvironment. Here, a brief overview of the tumor microenvironment is provided and key considerations in biofabrication of tumor models are discussed. Bioprinting techniques and choice of bioinks for both natural and synthetic polymers are also outlined. Lastly, current bioprinted tumor models are reviewed and the perspectives of how clinical applications can greatly benefit from 3D bioprinting technologies are offered.

AQP5 complements LGR5 to determine the fates of gastric cancer stem cells through regulating ULK1 ubiquitination

BACKGROUND

Cancer stem cells (CSCs) are regarded as the "seed cells" for tumorigenesis, metastasis, recurrence and drug resistance. However, specific surface markers of CSCs of different origins have not been documented.

METHODS

Single-cell sequencing was used to analyze the highly expressed genes in cancer stem cells of gastric cancer patients, and it was verified that AQP5 was specifically highly expressed in gastric cancer stem cells (GC-CSCs) in vivo and in vitro. The effect of AQP5-promoting LGR5 on the malignant biological function of GC-CSCs was investigated. The mechanism by which AQP5 affects GC-CSCs was explored through transcriptome sequencing, proteomic detection, mass spectrometry, etc. RESULTS: We report the identification and validation of AQP5 as a potentially specific surface marker of GC-CSCs. AQP5 was significantly upregulated in CSCs isolated from gastric cancer patients and in spheroid cells, and AQP5 was coexpressed with the canonical stem marker LGR5. Biologically, AQP5 promoted the sphere formation, proliferation, migration and invasion of GC cells in vitro and enhanced tumorigenesis in vivo. Furthermore, AQP5 coordinated with LGR5 and synergistically promoted the tumorigenesis of GC-CSCs. At the mechanistic level, AQP5 activated autophagy by inducing the LC3I/LC3II transformation in GC-CSCs, which was crucial for the biological functions of AQP5. Finally, we demonstrated that AQP5 recruited the E3 ligase TRIM21 to the key autophagy protein ULK1 and induced the K63-mediated ubiquitination of ULK1.

CONCLUSIONS

We elucidate a novel surface marker, AQP5, which is specifically expressed by GC-CSCs. Furthermore, our study creates a link between AQP5 and LGR5 and highlights the necessity of targeting both surface markers simultaneously as a promising approach for the treatment of gastric cancer patients.