Cellulose-Acetate Coating by Integrating Ester Group with Zinc Salt for Dendrite-Free Zn Metal Anodes

Constructing Dynamic Cross-Linking Networks as Durable Bifunctional Coating for Highly Stable Zinc Anodes

The serious dendrite growth and H2O-induced side reactions on the Zn electrode lead to a significant fading in the cycling performance, hindering the development of commercial applications of aqueous Zn-ion batteries (AZIBs). Herein, a novel bifunctional network coating of dynamically cross-linking sodium alginate with trehalose has been rationally constructed on the Zn anode (Zn@AT). Firstly, the AT coating possesses abundant zinophilic oxygen-containing functional groups, which are able to induce uniform Zn2+ ion flux. Secondly, the AT coating as a solid barrier can effectively inhibit H2O-induced side reactions by lowering the activity of H2O molecules. More specially, based on the dynamic cross-linking, AT network coating is endowed with self-healing capacity during cycling for durable battery operation. Consequentially, Zn@AT anodes in symmetric cells can cycle stably for 2787 h at 2 mA cm-2/2 mAh cm-2, and even achieve a significantly long cycle performance of 1087 h at large charge/discharge depths of 10 mA cm-2/10 mAh cm-2. Moreover, the Zn@AT//MnO2 full cell shows excellent specific capacity of 175 mAh g-1 after 400 cycles. This study lights an effective strategy to enhance the durability of Zn electrodes in AZIBs.

Tackling the Challenges of Aqueous Zn-Ion Batteries via Polymer-Derived Strategies

Zn-ion batteries (ZIBs) have gathered unprecedented interest recently benefiting from their intrinsic safety, affordability, and environmental benignity. Nevertheless, their practical implementation is hampered by low rate performance, inferior Zn2+ diffusion kinetics, and undesired parasitic reactions. Innovative solutions are put forth to address these issues by optimizing the electrodes, separators, electrolytes, and interfaces. Remarkably, polymers with inherent properties of low-density, high processability, structural flexibility, and superior stability show great promising in tackling the challenges. Herein, the recent progress in the synthesis and customization of functional polymers in aqueous ZIBs is outlined. The recent implementations of polymers into each component are summarized, with a focus on the inherent mechanisms underlying their unique functions. The challenges of incorporating polymers into practical ZIBs are also discussed and possible solutions to circumvent them are proposed. It is hoped that such a deep analysis could accelerate the design of polymer-derived approaches to boost the performance of ZIBs and other aqueous battery systems as they share similarities in many aspects.

Polycarbonyl polymer with zincophilic sites as protective coating for highly reversible zinc metal anodes

The Zn anode of aqueous zinc ion batteries (AZIBs) have suffered from a series of rampant side reactions such as dendrite growth and corrosion, which seriously affect the reversibility and stability of Zn anodes. Herein, a polycarbonyl polymer poly(1,4,5,8-naphthalene tetracarboxylic anhydride anthraquinone) imine (PNAQI) as the protective coating is synthesized through a simple solvothermal method with the raw materials of the equimolar 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA) and 2, 6-aminoanthraquinone (2,6-DAAQ). A series of characterizations such as contact angle measurement and ex-situ XRD analysis confirm that it can effectively prevent some side reactions. Moreover, CO on PNAQI can regulate the uniform distribution of zinc, thereby preventing the occurrence of zinc dendrites. Finally, the PNAQI@Zn//PNAQI@Zn symmetrical cell demonstrates a long cycle life exceeding 1000 h at current density of 1.0 mA cm-2 and a capacity of 1.0 mAh cm-2. The result significantly outperforms the cycling performance of the cell with bare zinc anode. Especially, the full battery of PNAQI@Zn//NH4V4O10 demonstrates an excellent capacity retention and prolonged cycle life (96.9 mAh/g after 1000 cycles at 1.0 A/g) compared to Zn//NH4V4O10. This work provides an effective, simple and low-cost solution for developing high-performance AZIBs.

Engineering a High-Strength and Superior-Electrolyte-Wettability Silk Fibroin-Based Gel Interface Achieving Dendrite-Free Zn Anode

Zn metal anode is confronted with notorious Zn dendrite growth caused by inhomogeneous Zn2+ deposition, rampant dendrite growth, and serious interface side reactions, which significantly hinder their large-scale implication. Interface modification engineering is a powerful strategy to improve the Zn metal anode by regulating Zn2+ deposition behavior, suppressing dendrite formation, and protecting the anode from electrolyte corrosion. Herein, we have designed a high-strength and superior-electrolyte-wettability composite gel protective layer based on silk fibroin (SF) and ionic liquids (ILs) on the Zn anode surface by a straightforward spin-coating strategy. The Zn ion transport kinetics and mechanical properties were further improved by following the incubation process to construct a more well-ordered β-sheet structure. Consequently, the incubated composite gel coating serves as a command station, guiding the Zn ion's preferential growth along the (002) plane, resulting in a smooth and uniform deposition morphology. Driven by these improvements, the zinc anode modified with this composite gel exhibits a remarkably long-term cycling lifespan up to 2200 h at 2 mA cm-2, while also displaying superior rate capability. This study represents a landmark achievement in the realm of electrochemical science, delineating a clear pathway toward the realization of a highly reversible and enduring Zn anode.

Gold-Nanolayer-Derived Zincophilicity Suppressing Metallic Zinc Dendrites and Its Efficacy in Improving Electrochemical Stability of Aqueous Zinc-Ion Batteries

Herein, an Au-coating layer adjusted on the surface of a Zn metal electrode that effectively suppresses the dendrite growth as well as the mechanisms underlying the dendrite suppression as a result of the zincophilic character of Au is introduced. For the Au-coated Zn metal symmetric cell, uniform deposition of Zn-derived compounds was revealed by operando synchrotron tomography. Microscopic studies demonstrate that the Au-coating layer is induced to form a new Zn-Au alloy during the initial Zn deposition, resulting in stabilized long-term stripping/plating of Zn via the 'embracing effect' that intimately accommodates Zn deposition for further cycles. This property supports the successful operation of symmetrical cells up to 50 mA cm-2 . According to Zn electrodeposition simulation, it is verified that the suppression of dendrite growth is responsible for the electro-conducting Au nanolayer that uniformly distributes the electric field and protects the Zn electrode from corrosion, ultimately promoting uniform Zn growth. The compatibility of the Au-coating layer for full cell configuration is verified using NaV3 O8 as a cathode material over 1 000 cycles. This finding provides a new pathway for the enhancement of the electrochemical performance of ZIBs by suppressing the dendritic growth of Zn by means of a zincophilic Au nanolayer.

Stabilizing Zn Metal Anode Through Regulation of Zn Ion Transfer and Interfacial Behavior with a Fast Ion Conductor Protective Layer

Aqueous Zn-ion batteries (AZIBs) attract intensive attention owing to their environmental friendliness, cost-effectiveness, innate safety, and high specific capacity. However, the practical applications of AZIBs are hindered by several adverse phenomena, including corrosion, Zn dendrites, and hydrogen evolution. Herein, a Zn anode decorated with a 3D porous-structured Na3 V2 (PO4)3 (NVP@Zn) is obtained, where the NVP reconstruct the electrolyte/anode interface. The resulting NVP@Zn anode can provide a large quantity of fast and stable channels, facilitating enhanced Zn ion deposition kinetics and regulating the Zn ions transport process through the ion confinement effect. The NASICON-type NVP protective layer promote the desolvation process due to its nanopore structure, thus effectively avoiding side reactions. Theoretical calculations indicate that the NVP@Zn electrode has a higher Zn ion binding energy and a higher migration barrier, which demonstrates that NVP protective layer can enhance Zn ion deposition kinetics and prevent the unfettered 2D diffusion of Zn ions. Therefore, the results show that NVP@Zn/MnO2 full cell can maintain a high specific discharge capacity of 168 mAh g-1 and a high-capacity retention rate of 74.6% after cycling. The extraordinary results obtained with this strategy have confirmed the promising applications of NVP in high-performance AZIBs.

Recent advances in cellulosic materials for aqueous zinc-ion batteries: An overview

Aqueous zinc-ion batteries (AZIBs), with the merits of high safety, environmental friendliness, abundant resources, and competitive energy density are recognized as a promising secondary battery technology and are anticipated to be a great alternative to organic lithium-ion batteries (LIBs). However, the commercial application of AZIBs is severely hindered by intractable issues, including high desolvation barrier, sluggish ion transport kinetics, growth of zinc dendrite, and side reactions. Nowadays, cellulosic materials are frequently employed in the fabrication of advanced AZIBs, because of the intrinsically excellent hydrophilicity, strong mechanical strength, sufficient active groups, and unexhaustible production. In this paper, we start from reviewing the success and dilemma of organic LIBs, followed by introducing the next-generation power source of AZIBs. After summarizing the features of cellulose with great potential in advanced AZIBs, we comprehensively and logically analyze the applications and superiorities of cellulosic materials in AZIBs electrodes, separators, electrolytes, and binders with an in-depth perspective. Finally, a clear outlook is delivered for future development of cellulose in AZIBs. Hopefully, this review can offer a smooth avenue for future direction of AZIBs by means of cellulosic material design and structure optimization.

Advances in Cellulose-Based Composites for Energy Applications

The various forms of cellulose-based materials possess high mechanical and thermal stabilities, as well as three-dimensional open network structures with high aspect ratios capable of incorporating other materials to produce composites for a wide range of applications. Being the most prevalent natural biopolymer on the Earth, cellulose has been used as a renewable replacement for many plastic and metal substrates, in order to diminish pollutant residues in the environment. As a result, the design and development of green technological applications of cellulose and its derivatives has become a key principle of ecological sustainability. Recently, cellulose-based mesoporous structures, flexible thin films, fibers, and three-dimensional networks have been developed for use as substrates in which conductive materials can be loaded for a wide range of energy conversion and energy conservation applications. The present article provides an overview of the recent advancements in the preparation of cellulose-based composites synthesized by combining metal/semiconductor nanoparticles, organic polymers, and metal-organic frameworks with cellulose. To begin, a brief review of cellulosic materials is given, with emphasis on their properties and processing methods. Further sections focus on the integration of cellulose-based flexible substrates or three-dimensional structures into energy conversion devices, such as photovoltaic solar cells, triboelectric generators, piezoelectric generators, thermoelectric generators, as well as sensors. The review also highlights the uses of cellulose-based composites in the separators, electrolytes, binders, and electrodes of energy conservation devices such as lithium-ion batteries. Moreover, the use of cellulose-based electrodes in water splitting for hydrogen generation is discussed. In the final section, we propose the underlying challenges and outlook for the field of cellulose-based composite materials.

3D Artificial Array Interface Engineering Enabling Dendrite-Free Stable Zn Metal Anode

The ripple effect induced by uncontrollable Zn deposition is considered as the Achilles heel for developing high-performance aqueous Zn-ion batteries. For this problem, this work reports a design concept of 3D artificial array interface engineering to achieve volume stress elimination, preferred orientation growth and dendrite-free stable Zn metal anode. The mechanism of MXene array interface on modulating the growth kinetics and deposition behavior of Zn atoms were firstly disclosed on the multi-scale level, including the in-situ optical microscopy and transient simulation at the mesoscopic scale, in-situ Raman spectroscopy and in-situ X-ray diffraction at the microscopic scale, as well as density functional theory calculation at the atomic scale. As indicated by the electrochemical performance tests, such engineered electrode exhibits the comprehensive enhancements not only in the resistance of corrosion and hydrogen evolution, but also the rate capability and cyclic stability. High-rate performance (20 mA cm-2) and durable cycle lifespan (1350 h at 0.5 mA cm-2, 1500 h at 1 mA cm-2 and 800 h at 5 mA cm-2) can be realized. Moreover, the improvement of rate capability (214.1 mAh g-1 obtained at 10 A g-1) and cyclic stability also can be demonstrated in the case of 3D MXene array@Zn/VO2 battery. Beyond the previous 2D closed interface engineering, this research offers a unique 3D open array interface engineering to stabilize Zn metal anode, the controllable Zn deposition mechanism revealed is also expected to deepen the fundamental of rechargeable batteries including but not limited to aqueous Zn metal batteries.