Soft Template-Based Synthesis of Mesoporous Phosphorus- and Boron-Codoped NiFe-Based Alloys for Efficient Oxygen Evolution Reaction

Low Ru doping induced interface and defects engineering in 2D square micro-mesoporous CoNiRuOx nanosieves for advanced oxygen evolution electrocatalysis

Efficient oxygen evolution reaction (OER) catalysts require the reasonable integration of geometric architecture, defects construction and interfacial electronic structure, which is difficult to combine multiple advantages into one low-cost catalysts. Herein, we designed a novel low Ru doping 2D square CoNiRuOx nanosieves (NSs) with abundant surface micropore and mesopore structure, rich oxygen defects and heterophase interfaces. Owing to the Ru incorporation, the electrons in Ni2+ could partially spontaneously transfer to the Ru4+ species by the bridge O2- with π donation effect according to the proposed "Ni-O-Co-O-Ru-O-Ni" electron interaction model. Benefitting from the porous surface with rich mass transfer channel, increased oxygen defects concentration, well-optimized electron redistribution, the CoNiRuOx nanosieves possessed a low overpotential of 261 mV to reach the current density of 10 mA cm-2, which is better than that of counterpart CoNiOx NSs and commercial RuO2 catalysts. The CoNiRuOx NSs also possessed the favorable durability with 50 h. Moreover, the CoNiRuOx//Pt/C electrode couple exhibited enhanced overall water splitting performance. This work provides offers insightful significance to design 2D micro-mesoporous materials for the robust electrocatalysis processes related to energy conversion technologies.

Mesoporous High-Entropy Alloy Films

High-entropy alloys (HEAs) are promising materials for electrochemical energy applications due to their excellent catalytic performance and durability. However, the controlled synthesis of HEAs with a well-defined structure and a uniform composition distribution remains a challenge. Herein, a soft template-assisted electrodeposition technique is used to fabricate a mesoporous HEA (m-HEA) film with a uniform composition distribution of Pt, Pd, Rh, Ru, and Cu, providing a suitable platform for investigating structure-performance relationships. Electrochemical deposition enables the uniform nucleation and grain growth of m-HEA, which can be deposited onto many conductive substrates. The m-HEA film exhibits an enhanced mass activity of 4.2 A mgPt-1 toward methanol oxidation reaction (MOR), which is 7.2-fold and 35-fold higher than a mesoporous Pt film and commercial Pt black, respectively. Experimental characterization indicates that structural defects and a low work function of the m-HEA film offer sufficient active sites and fast electron-transfer kinetics. Furthermore, theoretical calculations demonstrate that the variety of favorable adsorption sites on multimetallic elements of HEA reduces the barriers for dehydration pathways and *CO species removal, ensuring optimal performance for complex MOR reactions. This work provides an effective approach to designing a variety of HEA catalysts with well-controlled porous structures for targeted electrocatalytic applications.

Unlocking Efficiency: Minimizing Energy Loss in Electrocatalysts for Water Splitting

Catalysts play a crucial role in water electrolysis by reducing the energy barriers for hydrogen and oxygen evolution reactions (HER and OER). Research aims to enhance the intrinsic activities of potential catalysts through material selection, microstructure design, and various engineering techniques. However, the energy consumption of catalysts has often been overlooked due to the intricate interplay among catalyst microstructure, dimensionality, catalyst-electrolyte-gas dynamics, surface chemistry, electron transport within electrodes, and electron transfer among electrode components. Efficient catalyst development for high-current-density applications is essential to meet the increasing demand for green hydrogen. This involves transforming catalysts with high intrinsic activities into electrodes capable of sustaining high current densities. This review focuses on current improvement strategies of mass exchange, charge transfer, and reducing electrode resistance to decrease energy consumption. It aims to bridge the gap between laboratory-developed, highly efficient catalysts and industrial applications regarding catalyst structural design, surface chemistry, and catalyst-electrode interplay, outlining the development roadmap of hierarchically structured electrode-based water electrolysis for minimizing energy loss in electrocatalysts for water splitting.

Plasma-Induced Oxygen Defect Engineering in Perovskite Oxide for Boosting Oxygen Evolution Reaction

Perovskite oxides are considered highly promising candidates for oxygen evolution reaction (OER) catalysts due to their low cost and adaptable electronic structure. However, modulating the electronic structure of catalysts without altering their nanomorphology is crucial for understanding the structure-property relationship. In this study, a simple plasma bombardment strategy is developed to optimize the catalytic activity of perovskite oxides. Experimental characterization of plasma-treated LaCo0.9Fe0.1O3 (P-LCFO) reveals abundant oxygen vacancies, which expose numerous active sites. Additionally, X-ray photoelectron spectroscopy and X-ray absorption fine structure analyses indicate a low Co valence state in P-LCFO, likely due to the presence of these oxygen vacancies, which contributes to an optimized electronic structure that enhances OER performance. Consequently, P-LCFO exhibits significantly improved OER catalytic activity, with a low overpotential of 294 mV at a current density of 10 mA cm-2, outperforming commercial RuO2. This work underscores the benefits of plasma engineering for studying structure-property relationships and developing highly active perovskite oxide catalysts for water splitting.

Electron regulation of CeO2 on CoP multi-shell hetero-junction micro-sphere towards highly efficient water oxidation

CeO2 has been identified as a significant cocatalyst to enhance the electrocatalytic activity of transition metal phosphides (TMPs). However, the electrocatalytic mechanism by which CeO2 enhances the catalytic activity of TMP remains unclear. In this study, we have successfully developed a unique CeO2-CoP-1-4 multishell microsphere heterostructure catalyst through a simple hydrothermal and calcination process. CeO2-CoP-1-4 exhibits great potential for electrocatalytic oxygen evolution reaction (OER), requiring only an overpotential of 254 mV to achieve a current density of 10 mA cm-2. Moreover, CeO2-CoP-1-4 demonstrates excellent operating durability lasting for 55 h. The presence of CeO2 as a cocatalyst can regulate the microsphere structure of CoP, the resulting multishell microsphere structure can shorten the mass transfer distance, and improve the utilization rate of the active site. Furthermore, in situ Raman and ex situ characterizations, and DFT theoretical calculation results reveal that CeO2 can effectively regulates the electronic structure of Co species, reduces the reaction free energy of rate-limiting step, thus increase the reaction kinetic. Overall, this study provides experimental and theoretical evidence to better comprehend the mechanism and structure evolution of CeO2 in enhancing the OER performance of CoP, offering a unique design inspiration for the development of efficient hollow heterojunction electrocatalysts.

Unveiling the Reaction Mechanism of Nitrate Reduction to Ammonia Over Cobalt-Based Electrocatalysts

Electrocatalytic reduction of nitrate to ammonia (NRA) has emerged as an alternative strategy for sewage treatment and ammonia generation. Despite excellent performances having been achieved over cobalt-based electrocatalysts, the reaction mechanism as well as veritable active species across a wide potential range are still full of controversy. Here, we adopt CoP, Co, and Co3O4 as model materials to solve these issues. CoP evolves into a core@shell structured CoP@Co before NRA. For CoP@Co and Co catalysts, a three-step relay mechanism is carried out over superficial dynamical Coδ+ active species under low overpotential, while a continuous hydrogenation mechanism from nitrate to ammonia is unveiled over superficial Co species under high overpotential. In comparison, Co3O4 species are stable and steadily catalyze nitrate hydrogenation to ammonia across a wide potential range. As a result, CoP@Co and Co exhibit much higher NRA activity than Co3O4 especially under a low overpotential. Moreover, the NRA performance of CoP@Co is higher than Co although they experience the same reaction mechanism. A series of characterizations clarify the reason for performance enhancement highlighting that CoP core donates abundant electrons to superficial active species, leading to the generation of more active hydrogen for the reduction of nitrogen-containing intermediates.

Unveiling synergy of strain and ligand effects in metallic aerogel for electrocatalytic polyethylene terephthalate upcycling

Recently, there has been a notable surge in interest regarding reclaiming valuable chemicals from waste plastics. However, the energy-intensive conventional thermal catalysis does not align with the concept of sustainable development. Herein, we report a sustainable electrocatalytic approach allowing the selective synthesis of glycolic acid (GA) from waste polyethylene terephthalate (PET) over a Pd67Ag33 alloy catalyst under ambient conditions. Notably, Pd67Ag33 delivers a high mass activity of 9.7 A mgPd-1 for ethylene glycol oxidation reaction (EGOR) and GA Faradaic efficiency of 92.7 %, representing the most active catalyst for selective GA synthesis. In situ experiments and computational simulations uncover that ligand effect induced by Ag incorporation enhances the GA selectivity by facilitating carbonyl intermediates desorption, while the lattice mismatch-triggered tensile strain optimizes the adsorption of *OH species to boost reaction kinetics. This work unveils the synergistic of strain and ligand effect in alloy catalyst and provides guidance for the design of future catalysts for PET upcycling. We further investigate the versatility of Pd67Ag33 catalyst on CO2 reduction reaction (CO2RR) and assemble EGOR//CO2RR integrated electrolyzer, presenting a pioneering demonstration for reforming waste carbon resource (i.e., PET and CO2) into high-value chemicals.

A sulfur-modified pore-blocking method to enhance the electrocatalytic stability of carbon-supported platinum nanoparticles

Currently, the durability of electrode materials remains a big obstacle to the widespread adoption of proton exchange membrane fuel cells (PEMFCs). Herein thiourea and sodium dodecyl benzene sulfonate (SDS) were employed as sulfur source and carbon source to modify the pristine carbon black (Ketjen black EC300 J). A highly durable carbon supported Pt nanosized catalyst with higher platinum utilization for oxygen reduction reaction (ORR) in PEMFCs was produced by doping elemental sulfur into carbon supports and decreasing the carbon pore sizes and volume through a successive impregnation technique. The catalyst exhibits an initial activity of 0.167 A mgPt -1 at 0.90 V and demonstrates minimal activity loss after acceleration stress test (30,000 cycles of AST). The half-wave potential loss for representative sample (Pt/S-C-3) is only 14 mV with only 21.8 % ECSA decrease, 27.5 % MA loss and 5.9 % SA loss. A sintering test at various temperature shows a minor average size increase for sulfur-doped carbon (S-C) supported one (from 2.09 to 2.52 nm). In single-cell test, the MEA sample employing the platinum catalyst on modified carbon as cathode exhibited almost negligible performance loss after 30,000 cycles of AST.

FeCoCuMnRuB Nanobox with Dual Driving of High-Entropy and Electron-Trap Effects as the Efficient Electrocatalyst for Water Oxidation

High-entropy borides hold potential as electrocatalysts for water oxidation. However, the synthesis of the tailored nanostructures remains a challenge due to the thermodynamic immiscibility of polymetallic components. Herein, a FeCoCuMnRuB nanobox decorated with a nanosheet array was synthesized for the first time by a "coordination-etch-reduction" method. The FeCoCuMnRuB nanobox has various structural characteristics to express the catalytic performance; meanwhile, it combines the high-entropy effect of multiple components with the electron trap effect induced by electron-deficient B, synergistically regulating its electronic structure. As a result, FeCoCuMnRuB nanobox exhibits enhanced OER activity with a low overpotential (η10 = 233 mV), high TOF value (0.0539 s-1), small Tafel slope (61 mV/dec), and a satisfactory stability for 200 h, outperforming the high-entropy alloy and low-entropy borides. This work develops a high entropy and electron-deficient B-driven strategy for motivating the catalytic performance of water oxidation, which broadens the structural diversity and category of high-entropy materials.

Highly Efficient Transformation of Tar Model Compounds into Hydrogen by a Ni-Co Alloy Nanocatalyst During Tar Steam Reforming

Hydrogen (H2) production from coal and biomass gasification was considered a long-term and viable way to solve energy crises and global warming. Tar, generated as a hazardous byproduct, limited its large-scale applications by clogging and corroding gasification equipment. Although catalytic steam reforming technology was used to convert tar into H2, catalyst deactivation restricted its applicability. A novel nanocatalyst was first synthesized by the modified sol-gel method using activated biochar as the support, nickel (Ni) as the active component, and cobalt (Co) as the promoter for converting tar into H2. The results indicated that a high H2 yield of 263.84 g H2/kg TMCs (Tar Model Compounds) and TMC conversion of almost 100% were obtained over 6% Ni-4% Co/char, with more than 30% increase in hydrogen yield compared to traditional catalysts. Moreover, 6% Ni-4% Co/char exhibited excellent resistance to carbon deposition by removing the nucleation sites for graphite formation, forming stable Ni-Co alloy, and promoting the char gasification reaction; resistance to oxidation deactivation due to the high oxygen affinity of Co and reduction of the oxidized nickel by H2 and CO; resistance to sintering deactivation by strengthened interaction between Ni and Co, high specific surface area (920.61 m2/g), and high dispersion (7.3%) of Ni nanoparticles. This work provided a novel nanocatalyst with significant potential for long-term practical applications in the in situ conversion of tar into H2 during steam reforming.

Hollow Ru/RuO2 nanospheres with nanoparticulate shells for high performance electrocatalytic oxygen evolution reactions

This work shows that hollow Ru/RuO2 nanoparticles having nanoparticulate shells (HN-Ru/RuO2) can be prepared using hollow microporous organic polymers with Ru species (H-MOP-Ru) as precursors. Using silica spheres as templates, H-MOPs were prepared through the Sonogashira-Hagihara coupling of 1,3,5-triethynylbenzene with 2,3-ethoxymethylenedioxy-1,4-diiodobenzene. Acid hydrolysis of cyclic ethyl orthoformate protecting groups generated catechol moieties to form H-MOP-Cat. Then, H-MOP-Ru was obtained by incorporating Ru species into H-MOP-Cat. Heat-treatment of H-MOP-Ru under air induced the formation of HN-Ru/RuO2 with a diameter of 61 nm and shells consisting of 6-7 nm nanoparticles. Due to the hollow structure and nanoparticulate shells, HN-Ru/RuO2 showed a high surface area of 80 m2 g-1 and a pore volume of 0.18 cm3 g-1. The HN-Ru/RuO2 showed enhanced electrocatalytic performance for the oxygen evolution reaction (OER) with an overpotential of 295 mV @ 10 mA cm-2 and a Tafel slope of 46 mV dec-1 in alkaline electrolyte, compared with control RuO2 such as commercial Ru/RuO2 nanoparticles (A-Ru/RuO2) and home-made Ru/RuO2 nanoparticles (N-Ru/RuO2) prepared via the same synthetic procedure as HN-Ru/RuO2. While HN-Ru/RuO2 inevitably contained Pd originated from coupling catalysts, it showed superior performance to Ru/RuO2 nanoparticles with the same Pd content (N1-Ru/RuO2), indicating that the efficient electrocatalytic performance of HN-Ru/RuO2 is attributable to its hollow structure and nanoparticulate shells.

Electron Redistribution in Iridium-Iron Dual-Metal-Atom Active Sites Enables Synergistic Enhancement for H2O2 Decomposition

Developing efficient heterogeneous H2O2 decomposition catalysts under neutral conditions is of great importance in many fields such as clinical therapy, sewage treatment, and semiconductor manufacturing but still suffers from low intrinsic activity and ambiguous mechanism understanding. Herein, we constructed activated carbon supported with an Ir-Fe dual-metal-atom active sites catalyst (IrFe-AC) by using a facile method based on a pulsed laser. The electron redistribution in Ir-Fe dual-metal-atom active sites leads to the formation of double reductive metal active sites, which can strengthen the metal-H2O2 interaction and boost the H2O2 decomposition performance of Ir-Fe dual-metal-atom active sites. Ir-Fe dual-metal-atom active sites show a high second-order reaction rate constant of 3.53 × 106 M-1·min-1, which is ∼106 times higher than that of Fe3O4. IrFe-AC is effective in removing excess intracellular reactive oxygen species, protecting DNA, and reducing inflammation under oxidative stress, indicating its therapeutic potential against oxidative stress-related diseases. This study could advance the mechanism understanding of H2O2 decomposition by heterogeneous catalysts and provide guidance for the rational design of high-performance catalysts for H2O2 decomposition.

Alkynes Electrooxidation to α,α-Dichloroketones in Seawater with Natural Chlorine Participation via Competitive Reaction Inhibition and Tip-Enhanced Reagent Concentration

The traditional synthesis of α,α-dichloroketones usually requires corrosive chlorine, harsh reaction conditions, or excessive electrolytes. Here, we report an electrooxidation strategy of ethynylbenzenes to α,α-dichloroketones by directly utilizing seawater as the chlorine source and electrolyte solution without an additional supporting electrolyte. High-curvature NiCo2O4 nanocones are designed to inhibit competitive O2 and Cl2 evolution reactions and concentrate Cl- and OH- ions, accelerating α,α-dichloroketone electrosynthesis. NiCo2O4 nanocones produce 81% yield, 61% Faradaic efficiency, and 44.2 mmol gcat.-1 h-1 yield rate of α,α-dichloroketones, outperforming NiCo2O4 nanosheets. A Cl• radical triggered Cl• and OH• radical addition mechanism is revealed by a variety of radical-trapping and control experiments. The feasibility of a solar-powered electrosynthesis system, methodological universality, and extended synthesis of α,α-dichloroketone-drug blocks confirm its practical potential. This work may provide a sustainable solution to the electrocatalytic synthesis of α,α-dichloroketones via the utilization of seawater resources.

Facile one-step synthesis of mesoporous Pt-based alloy nanospheres for ethanol electrooxidation

Mesoporous Pt-based alloy nanospheres were prepared via a one-step soft-template strategy. The regulation of electronic structure, lattice contraction and abundant active sites endowed the mesoporous Pt-based catalysts with remarkable electrochemical activity towards ethanol oxidation reaction.

Unlocking Catalytic Potential: Encasing CoP Nanoparticles within Mesoporous CoFeP Nanocubes for Enhanced Oxygen Evolution Reaction

Efficient and durable electrocatalysts fabricated by using nanosized nonprecious-metal-based materials have attracted considerable attention for use in the oxygen evolution reaction (OER). Understanding performance disparities and structure-property relationships of various nonprecious-metal-based nanostructures is crucial for optimizing their applications. Herein, CoP nanoparticles encompassed within a CoFeP shell (named CoP/CoFeP) are fabricated. The mesoporous CoFeP shell enables effective mass transport, affords abundant active sites, and ensures the accessibility of hybrid interfaces between CoP and CoFeP. Therefore, encased CoP/CoFeP nanocubes exhibit excellent OER catalytic activity with an overpotential of 266 mV at a current density of 10 mA cm-2 in alkaline media, superior to reference hollow CoFeP nanocubes and commercial RuO2. Experimental characterization and theoretical calculations show that the encased structure of CoP/CoFeP with a rich Fe-doped shell enables electronic interactions between CoP and CoFeP, as well as accelerates structural reconstruction that exposes more active sites, yielding an enhanced OER performance. This study aims to inspire further work on nonprecious-metal catalysts with tailored nanostructures and electronic properties for the OER.

Insight into selenium vacancies enhanced CoSe2/MoSe2 heterojunction nanosheets for hydrazine-assisted electrocatalytic water splitting

The integration of interface engineering and vacancy engineering was a feasible way to develop highly efficient electrocatalysts toward water electrolysis. Herein, we designed CoSe2/MoSe2 heterojunction nanosheets with abundant Se vacancies (VSe-CoSe2/MoSe2) for electrocatalytic water splitting. In the VSe-CoSe2/MoSe2 electrocatalyst, the electrons more easily transferred from CoSe2 to MoSe2, and interface engineering not only modulated the electronic structure, but also supplied more heterointerfaces and catalytic sites. After chemical etching, partial Se atoms were eliminated, which further activated the inert plane of the VSe-CoSe2/MoSe2 electrocatalyst and induced electron redistribution. The removal of surface Se atoms was also beneficial to expose inner reactive sites, which promoted adsorption toward reaction intermediates. Density functional theory calculations revealed that interface engineering and vacancy engineering collaboratively optimized the adsorption energy of the VSe-CoSe2/MoSe2 electrocatalyst toward the intermediate H* during the hydrogen evolution reaction process, leading to better electrocatalytic activity. The density of state diagram manifested the refined electronic structure of the VSe-CoSe2/MoSe2 electrocatalyst, and it exhibited a higher electronic state near the Fermi level, which indicated superior electronic conductivity, facilitating electron transport during the catalytic process. In alkaline media, the VSe-CoSe2/MoSe2 electrocatalyst delivered low overpotentials of merely 74 and 242 mV to obtain 10 mA cm-2 toward hydrogen evolution reaction and oxygen evolution reaction. This work illustrated the feasibility of combining two or more strategies to develop high-performance catalysts for water electrolysis.

Modulating Electronic Metal-Support Interactions to Boost Visible-Light-Driven Hydrolysis of Ammonia Borane: Nickel-Platinum Nanoparticles Supported on Phosphorus-Doped Titania

Ammonia borane (AB) is a promising material for chemical H2 storage owing to its high H2 density (up to 19.6 wt %). However, the development of an efficient catalyst for driving H2 evolution through AB hydrolysis remains challenging. Therefore, a visible-light-driven strategy for generating H2 through AB hydrolysis was implemented in this study using Ni-Pt nanoparticles supported on phosphorus-doped TiO2 (Ni-Pt/P-TiO2 ) as photocatalysts. Through surface engineering, P-TiO2 was prepared by phytic-acid-assisted phosphorization and then employed as an ideal support for immobilizing Ni-Pt nanoparticles via a facile co-reduction strategy. Under visible-light irradiation at 283 K, Ni40 Pt60 /P-TiO2 exhibited improved recyclability and a high turnover frequency of 967.8 molH 2 ${{_{{\rm H}{_{2}}}}}$  molPt -1  min-1 . Characterization experiments and density functional theory calculations indicated that the enhanced performance of Ni40 Pt60 /P-TiO2 originated from a combination of the Ni-Pt alloying effect, the Mott-Schottky junction at the metal-semiconductor interface, and strong metal-support interactions. These findings not only underscore the benefits of utilizing multipronged effects to construct highly active AB-hydrolyzing catalysts, but also pave a path toward designing high-performance catalysts by surface engineering to modulate the electronic metal-support interactions for other visible-light-induced reactions.

Surface and near-surface engineering design of transition metal catalysts for promoting water splitting

Transition metal catalysts are widely used in the field of hydrogen production via water electrolysis. The surface state and near-surface environment of the catalysts greatly affect the efficiency of hydrogen production. Therefore, the rational design of surface engineering and near-surface engineering of transition metal catalysts can significantly improve the performance of water electrolysis. This review systematically introduces surface engineering strategies, including heteroatom doping, vacancy engineering, strain regulation, heterojunction effect, and surface reconstruction. These strategies optimize the surface electronic structure of the catalysts, expose more active sites, and promote the formation of highly active species, ultimately enhancing water electrolysis performance. Furthermore, near-surface engineering strategies, such as surface wettability, three-dimensional structure, high-curvature structure, external field assistance, and extra ion addition, are thoroughly discussed. These strategies expedite the mass transfer of reactants and gas products, improve the local chemical environment near the catalyst surface, and contribute toward achieving an industrial-level current density for overall water splitting. Finally, the key challenges faced by surface engineering and near-surface engineering of transition metal catalysts are highlighted and potential solutions are proposed. This review offers essential guidelines for the design and development of efficient transition metal catalysts for water electrolysis.

Phosphorus-Doped PdSn Nanocatalyst with Abundant Defective Atoms for Enhanced Methanol Oxidation

The design of the nanostructure of palladium-based nanocatalysts is considered to be a very effective way to improve the performance of nanocatalysts. Recent studies have shown that multiphase nanostructures can increase the active sites of palladium catalysts, thus effectively improving the catalytic efficiency of palladium atoms. However, it is difficult to regulate the phase structure of Pd nanocatalysts to form a compound phase structure. In this work, PdSnP nanocatalysts with different compositions were synthesized by fine-regulating the doping amount of phosphorus atoms. The results show that the doping of phosphorus atoms not only changes the composition of PdSn nanocatalysts but also changes the microstructure, forming amorphous and crystalline multiphase structures. This multiphase nanostructure contains abundant interfacial defects, which effectively promotes the electrocatalytic oxidation efficiency of Pd atoms in small-molecule alcohols. Compared with the undoped PdSn nanocatalyst (480 mA mg_Pd^-1 and 2.28 mA cm^-2) and the commercial Pd/C catalyst (397 mA mg_Pd^-1 and 1.15 mA cm^-2), the mass (1746 mA mg_Pd^-1) and specific activities (8.56 mA cm^-2) of PdSn_0.38P_0.05 nanocatalysts in the methanol oxidation reaction were increased by 3.6 and 3.8 times and 4.4 and 7.4 times, respectively. This study provides a new synthesis strategy for the design and synthesis of efficient palladium-based nanocatalysts for the oxidation of small-molecule alcohols.

Pt-C interactions in carbon-supported Pt-based electrocatalysts

Carbon-supported Pt-based materials are highly promising electrocatalysts. The carbon support plays an important role in the Pt-based catalysts by remarkably influencing the growth, particle size, morphology, dispersion, electronic structure, physiochemical property and function of Pt. This review summarizes recent progress made in the development of carbon-supported Pt-based catalysts, with special emphasis being given to how activity and stability enhancements are related to Pt-C interactions in various carbon supports, including porous carbon, heteroatom doped carbon, carbon-based binary support, and their corresponding electrocatalytic applications. Finally, the current challenges and future prospects in the development of carbon-supported Pt-based catalysts are discussed.

Stepwise Monomicelle Assembly for Highly Ordered Mesoporous TiO2 Membranes with Precisely Tailored Mesophase and Porosity

Mesoporous materials with crystalline frameworks have been acknowledged as very attractive materials in various applications. Nevertheless, due to the cracking issue during crystallization and incompatible hydrolysis and assembly, the precise control for crystalline mesoscale membranes is quite infertile. Herein, we presented an ingenious stepwise monomicelle assembly route for the syntheses of highly ordered mesoporous crystalline TiO₂ membranes with delicately controlled mesophase, mesoporosity, and thickness. Such a process involves the preparation of monomicelle hydrogels and follows self-assembly by stepwise solvent evaporation, which enables the sensitive hydrolysis of TiO₂ oligomers and dilatory micelle assembly to be united. In consequence, the fabricated mesoporous TiO₂ membranes exhibit a broad flexibility, including tunable ordered mesophases (worm-like, hexagonal p6mm to body-centered cubic Im3̅m), controlled mesopore sizes (3.0-8.0 nm), and anatase grain sizes (2.3-8.4 nm). Besides, such mesostructured crystalline TiO₂ membranes can be extended to diverse substrates (Ti, Ag, Si, FTO) with tailored thickness. The great mesoporosity of the in situ fabricated mesoscopic membranes also affords excellent pseudocapacitive behavior for sodium ion storage. This study underscores a novel pathway for balancing the interaction of precursors and micelles, which could have implications for synthesizing crystalline mesostructures in higher controllability.

Heterostructured Ultrathin Two-Dimensional Co-FeOOH Nanosheets@1D Ir-Co(OH)F Nanorods for Efficient Electrocatalytic Water Splitting

It is highly desirable to develop high-performance and robust electrocatalysts for overall water splitting, as the existing electrocatalysts exhibit poor catalytic performance toward hydrogen and oxygen evolution reactions (HER and OER) in the same electrolytes, resulting in high cost, low energy conversion efficiency, and complicated operating procedures. Herein, a heterostructured electrocatalyst is realized by growing Co-ZIF-67-derived 2D Co-doped FeOOH on 1D Ir-doped Co(OH)F nanorods, denoted as Co-FeOOH@Ir-Co(OH)F. The Ir-doping couples with the synergy between Co-FeOOH and Ir-Co(OH)F effectively modulate the electronic structures and induce defect-enriched interfaces. This bestows Co-FeOOH@Ir-Co(OH)F with abundant exposed active sites, accelerated reaction kinetics, improved charge transfer abilities, and optimized adsorption energies of reaction intermediates, which ultimately boost the bifunctional catalytic activity. Consequently, Co-FeOOH@Ir-Co(OH)F exhibits low overpotentials of 192/231/251 and 38/83/111 mV at current densities of 10/100/250 mA cm^-2 toward the OER and HER in a 1.0 M KOH electrolyte, respectively. When Co-FeOOH@Ir-Co(OH)F is used for overall water splitting, cell voltages of 1.48/1.60/1.67 V are required at current densities of 10/100/250 mA cm^-2. Furthermore, it possesses outstanding long-term stability for OER, HER, and overall water splitting. Our study provides a promising way to prepare advanced heterostructured bifunctional electrocatalysts for overall alkaline water splitting.

Functional Surfactant-Induced Long-Range Compressive Strain in Curved Ultrathin Nanodendrites Boosts Electrocatalysis

Curved ultrathin PtPd nanodendrites (CNDs) with long-range compressive strain and highly branched feature are first prepared by a functional surfactant-induced strategy. Precise synthesis realized the construction of both curved and flat PtPd nanodendrites (NDs) with the same atomic ratio, which contributed to exploration of the strain effect on electrocatalytic performance alone. Abundant evidence is provided to confirm that the long-range compressive strain in curved PtPd architectures can effectively tailor the local coordination environment of active sites, lower the position of the d-band center, weaken the adsorption energy of the intermediates (e.g., H* and CO*), and ultimately increase their intrinsic activity. The density functional theory (DFT) calculations further reveal that the introduction of compressive strain weakens the Gibbs free-energy of the intermediate (ΔG_H*), which is favorable for accelerating the hydrogen evolution reaction (HER) kinetics. A similar enhanced electrocatalytic performance can also be found in the methanol oxidation reaction (MOR).

Engineering Amorphous/Crystalline Rod-like Core-Shell Electrocatalysts for Overall Water Splitting

The design of bifunctional electrocatalysts for hydrogen and oxygen evolution reactions delivering excellent catalytic activity and stability is highly desirable, yet challenged. Herein, we report an amorphous RuO₂-encapsulated crystalline Ni_0.85Se nanorod structure (termed as a/c-RuO₂/Ni_0.85Se) for enhanced HER and OER activities. The as-prepared a/c-RuO₂/Ni_0.85Se nanorods not only demonstrate splendid HER activity (58 mV@10 mA cm^-2 vs RHE), OER activity (233 mV@10 mA cm^-2 vs RHE), and electrolyzer activity (1.488 V@10 mA cm^-2 vs RHE for overall water splitting) but also exhibit long-term stability with negligible performance decay after 50 h continuous test for overall water splitting. In addition, the variation of the d-band center (from the perspective of bonding and antibonding states) is unveiled theoretically by density functional theory calculations upon amorphous RuO₂ layers coupling to clarify the increased hydrogen species adsorption for HER activity enhancement. This work represents a new pathway for the fabrication of bifunctional electrocatalysts toward green hydrogen generation.

Graphitic Carbon Cloth-Based Hybrid Molecular Catalyst: A Non-conventional, Synthetic Strategy of the Drop Casting Method for a Stable and Bifunctional Electrocatalyst for Enhanced Hydrogen and Oxygen Evolution Reactions

Hydrogen energy production through water electrolysis is envisaged as one of the most promising, sustainable, and viable alternate sources to cater to the incessant demands of renewable energy storage. Germane to our effort in this field, we report easily synthesizable and very cost-effective isoperthiocyanic acid (IPA) molecular complexes as electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under acidic and alkaline conditions. The Pd(II)IPA, Co(II)IPA, and Ni(II)IPA complexes were synthesized and were evaluated for HER and OER applications. These complexes when embedded onto graphitized carbon cloth (GrCC) exhibited a significant enhancement in the HER activity in contrast to their pristine counterparts. The hybrid electrocatalyst Pd(II)IPA among the three showed an extremely low overpotential of 94.1 mV to achieve a current density of 10 mA cm-2, while Co(II)IPA and Ni(II)IPA complexes showed overpotentials of 367 and 394 mV, respectively, to achieve a current density of 10 mA cm-2. These complexes on carbon cloth showed decreased charge transfer resistance compared to that of pristine metal complexes. The enhanced catalytic activity of the complexes on carbon cloth can be attributed to the porous and conducting nature of the graphitized carbon cloth. For OER activity, the Pd(II)IPA complex showed an excellent performance with an overpotential value of 210 mV, while Co(II)IPA and Ni(II)IPA exhibited overpotentials of 400 and 270 mV, respectively, to drive a current density of 10 mA cm-2 in 0.1 M KOH. This work further widens the scope and application of molecular complexes in combination with an excellent carbon support for renewable energy storage applications.