Carbon Dots Mediated In Situ Confined Growth of Bi Clusters on g-C3 N4 Nanomeshes for Boosting Plasma-Assisted Photoreduction of CO2

Robust Bi-anchoring carbon dot/BiOCl sheet heterojunction photocatalysts toward superior photocatalytic activity

BiOCl has attracted much attention due to its robust layered structure, excellent photocatalytic activity and nontoxicity. However, its practical application is hindered by its narrowband UV photoresponse and rapid recombination of photocarriers. Herein, zero-dimensional Bi-anchoring carbon quantum dot (Bi-CD)/two-dimensional BiOCl heterojunction (Bi-CD/BiOCl) photocatalysts are designed and synthesized by a facile hydrothermal method. Under 190-1100 nm broadband light irradiation, the optimized Bi-CD/BiOCl sample exhibits a superb rhodamine B (RhB) degradation rate of nearly 100%, which is 2.3 (1.7) times that of pristine BiOCl (CD/BiOCl). Additionally, the optimized sample exhibits an RhB degradation rate of up to 88.1% even under direct outdoor light and robust durability in water solution. Experimental results combined with DFT calculations reveal that the superior photocatalytic activity arises from the synergetic effects of broader light absorption due to the incorporation of CD, extra hot electron excitation by the localized surface plasmon resonance (LSPR) effect of metallic Bi, and enhanced electron transfer across the heterojunction interface as well as the existence of more oxygen vacancy traps in BiOCl. This work gives insights into the structure and photocatalytic properties of Bi-CD/BiOCl and provides a new strategy for the design and fabrication of robust high-performance photocatalysts under wide spectrum light irradiation.

Bismuth-Doped Carbon Dots Decorated Escherichia coli for Enhanced Hydrogen Production

Photosynthetic inorganic biohybrid systems (PBSs) combining an inorganic photosensitizer with intact living cells provide an innovative view for solar hydrogen production. However, typical whole-cell biohybrid systems often suffer from sluggish electron transfer kinetics during transmembrane diffusion, which severely limits the efficiency of solar hydrogen production. Here, a unique biohybrid system with a quantum yield of 8.42% was constructed by feeding bismuth-doped carbon dots (Bi@CDS) to Escherichia coli (E. coli). In this biohybrid system, Bi@CDS can enter the cells and transfer the electrons upon light irradiation, greatly reducing the energy loss and shortening the distance of electron transfer. More importantly, the photocatalytic hydrogen production of the E. coli-Bi@CDs biohybrid system reached up to 0.95 mmol within 3 h under light irradiation (420-780 nm, 2000 W m-2), which is 1.36 and 2.38 times higher than that in the E. coli-CDs biohybrid system and the E. coli system, respectively. In addition, the mechanism of enhanced hydrogen production was further explored. It was found that the accelerated decomposition of glucose, the accelerated production of pyruvate, the inhibition of lactic acid, and the increase of formic acid were the reasons for the increase of hydrogen production. This work provides a novel strategy for improving the hydrogen production in photosynthetic inorganic biohybrid systems.

Schottky Junctions with Bi@Bi2MoO6 Core-Shell Photocatalysts toward High-Efficiency Solar N2-to-Ammonnia Conversion in Aqueous Phase

The photocatalytic nitrogen reduction reaction (NRR) in aqueous solution is a green and sustainable strategy for ammonia production. Nonetheless, the efficiency of the process still has a wide gap compared to that of the Haber-Bosch one due to the difficulty of N2 activation and the quick recombination of photo-generated carriers. Herein, a core-shell Bi@Bi2MoO6 microsphere through constructing Schottky junctions has been explored as a robust photocatalyst toward N2 reduction to NH3. Metal Bi self-reduced onto Bi2MoO6 not only spurs the photo-generated electron and hole separation owing to the Schottky junction at the interface of Bi and Bi2MoO6 but also promotes N2 adsorption and activation at Bi active sites synchronously. As a result, the yield of the photocatalytic N2-to-ammonia conversion reaches up to 173.40 μmol g-1 on core-shell Bi@Bi2MoO6 photocatalysts, as much as two times of that of bare Bi2MoO6. This work provides a new design for the decarbonization of the nitrogen reduction reaction by the utilization of renewable energy sources.

Amide Covalent Bonding Engineering in Heterojunction for Efficient Solar-Driven CO2 Reduction

Inefficient charge separation and slow interfacial reaction dynamics significantly hamper the efficiency of photocatalytic CO2 reduction. Herein, a facile EDC/NHS-assisted linking strategy was developed to enhance charge separation in heterojunction photocatalysts. Using this approach, we successfully synthesized amide-bonded carbon quantum dot-g-C3N4 (CQD-CN) heterojunction photocatalysts. The formation of amide covalent bonds between CN and CQDs in the CN-CQD facilitates efficient carrier migration, CO2 adsorption, and activation. Exploiting these advantages, the CN-CQD photocatalysts exhibit high selectivity with CO and CH4 evolution rates of 79.2 and 2.7 μmol g-1 h-1, respectively. These rates are about 1.7 and 3.6 times higher than those of CN@CQD and bulk CN, respectively. Importantly, the CN-CQD photocatalysts demonstrate exceptional stability, even after 12 h of continuous testing. The presence of the COOH* signal is identified as a crucial intermediate species in the conversion of CO2 to CO. This study presents a covalent bonding engineering strategy for developing high-performance heterojunction photocatalysts for efficient solar-driven reduction of CO2.

Reversible Stacking of 2D ZnIn2 S4 Atomic Layers for Enhanced Photocatalytic Hydrogen Evolution

It is technically challenging to reversibly tune the layer number of 2D materials in the solution. Herein, a facile concentration modulation strategy is demonstrated to reversibly tailor the aggregation state of 2D ZnIn2 S4 (ZIS) atomic layers, and they are implemented for effective photocatalytic hydrogen (H2 ) evolution. By adjusting the colloidal concentration of ZIS (ZIS-X, X = 0.09, 0.25, or 3.0 mg mL-1 ), ZIS atomic layers exhibit the significant aggregation of (006) facet stacking in the solution, leading to the bandgap shift from 3.21 to 2.66 eV. The colloidal stacked layers are further assembled into hollow microsphere after freeze-drying the solution into solid powders, which can be redispersed into colloidal solution with reversibility. The photocatalytic hydrogen evolution of ZIS-X colloids is evaluated, and the slightly aggregated ZIS-0.25 displays the enhanced photocatalytic H2 evolution rates (1.11 µmol m-2 h-1 ). The charge-transfer/recombination dynamics are characterized by time-resolved photoluminescence (TRPL) spectroscopy, and ZIS-0.25 displays the longest lifetime (5.55 µs), consistent with the best photocatalytic performance. This work provides a facile, consecutive, and reversible strategy for regulating the photo-electrochemical properties of 2D ZIS, which is beneficial for efficient solar energy conversion.

Regulating the Electronic Structure of Bismuth Nanosheets by Titanium Doping to Boost CO2 Electroreduction and Zn-CO2 Batteries

The electrochemical carbon dioxide reduction reaction (E-CO2 RR) to formate is a promising strategy for mitigating greenhouse gas emissions and addressing the global energy crisis. Developing low-cost and environmentally friendly electrocatalysts with high selectivity and industrial current densities for formate production is an ideal but challenging goal in the field of electrocatalysis. Herein, novel titanium-doped bismuth nanosheets (TiBi NSs) with enhanced E-CO2 RR performance are synthesized through one-step electrochemical reduction of bismuth titanate (Bi4 Ti3 O12 ). We comprehensively evaluated TiBi NSs using in situ Raman spectra, finite element method, and density functional theory. The results indicate that the ultrathin nanosheet structure of TiBi NSs can accelerate mass transfer, while the electron-rich properties can accelerate the production of *CO2 - and enhance the adsorption strength of *OCHO intermediate. The TiBi NSs deliver a high formate Faradaic efficiency (FEformate ) of 96.3% and a formate production rate of 4032 µmol h-1  cm-2 at -1.01 V versus RHE. An ultra-high current density of -338.3 mA cm-2 is achieved at -1.25 versus RHE, and simultaneously FEformate still reaches more than 90%. Furthermore, the rechargeable Zn-CO2 battery using TiBi NSs as a cathode catalyst achieves a maximum power density of 1.05 mW cm-2 and excellent charging/discharging stability of 27 h.

Green construction of metal- and additive-free citrus peel-derived carbon dot/g-C3N4 photocatalysts for the high-performance photocatalytic decomposition of sunset yellow

In this study, novel, metal-free, CP-derived CDs/g-C₃N₄ nanocomposites (CDCNs) were created by introducing citrus peel-derived carbon dots (CP-derived CDs) into graphite carbon nitride (g-C₃N₄) by a green hydrothermal method. The CDCNs were revealed to have superior photoelectrochemical properties relative to pristine g-C₃N₄ for the photocatalytic degradation of the food dye sunset yellow (SY) under visible light. For SY decomposition, the recommended catalyst contributed almost 96.3% to the photodegradation rate after 60 min of irradiation, showing satisfactory reusability, structural stability and biocompatibility. Moreover, a mechanism for enhanced photocatalytic SY degradation was proposed according to band analysis, free radical trapping and electron paramagnetic resonance (EPR) results. A possible pathway for SY photodegradation was also predicted from UV-visible (UV-Vis) spectroscopy and high-performance liquid chromatography (HPLC) results. The constructed nonmetallic nanophotocatalysts afford a novel route for the elimination of harmful dyes and for the resource conversion of citrus peels.

Hydroxyl radical-dominated selective oxidation of ethylbenzene over a photoactive polyoxometalate-based metal-organic framework

Realizing photo-promoted saturated C-H functionalization is a significant challenge. [Cu^I₃(H₂O)₆(TPT)₂][H₂BW₁₂O₄₀]·28H₂O was assembled by combining electron reservoir [BW₁₂O₄₀]^5- with photosensitizer TPT. The continuous coordination bonds and π-π stacking interactions facilitate hole-electron separation and electron transfer, and allow it to exhibit high photocatalytic activity toward ethylbenzene oxidation with O₂/H₂O as oxidants.