Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Gray mesoporous SnO2 catalyst for CO2 electroreduction with high partial current density and formate selectivity

The mesoporous metal oxide semiconductors exhibit unique chemical and physical characteristics, making them highly desirable for catalysis, electrochemistry, energy conversion, and energy storage applications. Here, we report the facial fabrication of mesoporous gray SnO2 (MGS) electrocatalysts employing an evaporation-induced co-assembly (EICA) approach, utilizing poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers Pluronic P123 (PEO-PPO-PEO) triblock copolymer as a template for electrochemical CO2 reduction reaction (eCO2RR). By sustaining the co-assembly conditions and utilizing a thermal treatment technique based on carbon, gray mesoporous SnO2 materials with a high density of active sites and oxygen vacancies can be constructed. The MGS materials were employed in eCO2RR in a flow cell type, which exhibits excellent catalytic activity and selectivity toward formate with a high partial current density of -234 mA cm-2 and Faradaic efficiency (FE) of 93.60 % at -1.3 V vs. reversible hydrogen electrode (RHE). Interestingly, the mesoporous SnO2 with a 1.5 wt% ratio of Sn precursor to P123 surfactant (MS-1.5@350N-400A) electrode exhibits a high level of Faradaic efficiency (FE) of (98%) at a low overpotential of -0.6 VRHE, which is a seldom recorded performance for similar systems. A stable FE of 96 ± 1% was observed in the range of -0.6 to -1.2 VRHE, which is the result of a large surface area (184 m2/g) and a high number of active sites and oxygen vacancies within the mesostructured framework.

Amino-Induced CO2 Spillover to Boost the Electrochemical Reduction Activity of CdS for CO Production

A considerable challenge in CO2 reduction reaction (CO2RR) to produce high-value-added chemicals comes from the adsorption and activation of CO2 to form intermediates. Herein, an amino-induced spillover strategy aimed at significantly enhancing the CO2 adsorption and activation capabilities of CdS supported on N-doped mesoporous hollow carbon sphere (NH2-CdS/NMHCS) for highly efficient CO2RR is presented. The prepared NH2-CdS/NMHCS exhibits a high CO Faradaic efficiency (FECO) exceeding 90% from -0.8 to -1.1 V versus reversible hydrogen electrode (RHE) with the highest FECO of 95% at -0.9 V versus RHE in H cell. Additional experimental and theoretical investigations demonstrate that the alkaline -NH2 group functions as a potent trapping site, effectively adsorbing the acidic CO2, and subsequently triggering CO2 spillover to CdS. The amino modification-induced CO2 spillover, combined with electron redistribution between CdS and NMHCS, not only readily achieves the spontaneous activation of CO2 to *COOH but also greatly reduces the energy required for the conversion of *COOH to *CO intermediate, thus endowing NH2-CdS/NMHCS with significantly improved reaction kinetics and reduced overpotential for CO2-to-CO conversion. It is believed that this research can provide valuable insights into the development of electrocatalysts with superior CO2 adsorption and activation capabilities for CO2RR application.

Regulation Strategy of Nanostructured Engineering on Indium-Based Materials for Electrocatalytic Conversion of CO2

Electrochemical carbon dioxide reduction (CO2 RR), as an emerging technology, can combine with sustainable energies to convert CO2 into high value-added products, providing an effective pathway to realize carbon neutrality. However, the high activation energy of CO2 , low mass transfer, and competitive hydrogen evolution reaction (HER) leads to the unsatisfied catalytic activity. Recently, Indium (In)-based materials have attracted significant attention in CO2 RR and a series of regulation strategies of nanostructured engineering are exploited to rationally design various advanced In-based electrocatalysts, which forces the necessary of a comprehensive and fundamental summary, but there is still a scarcity. Herein, this review provides a systematic discussion of the nanostructure engineering of In-based materials for the efficient electrocatalytic conversion of CO2 to fuels. These efficient regulation strategies including morphology, size, composition, defects, surface modification, interfacial structure, alloying, and single-atom structure, are summarized for exploring the internal relationship between the CO2 RR performance and the physicochemical properties of In-based catalysts. The correlation of electronic structure and adsorption behavior of reaction intermediates are highlighted to gain in-depth understanding of catalytic reaction kinetics for CO2 RR. Moreover, the challenges and opportunities of In-based materials are proposed, which is expected to inspire the development of other effective catalysts for CO2 RR.

Opening Direct Electrochemical Fischer-Tropsch Synthesis Path by Interfacial Engineering of Cu Electrode with P-Block Elements

The electrochemical synthesis of syngas (CO and H2) has garnered considerable attention in the context of Fischer-Tropsch (FT) synthesis employing thermal catalysts. Nonetheless, the need for a novel, cost-effective technique persists. In this investigation, we introduce a direct electrochemical (dEC) approach for FT synthesis that functions under ambient conditions by utilizing a p-block element (Sn and In) overlaid Cu electrode. Surface *CO and H* species were obtained in an electrolytic medium through the CO2 + H+ + e- → HOOCad → *CO (or direct CO adsorption) and H+ + e- → H* reactions, respectively. We have observed C2-7 long-chain hydrocarbons with a CnH2n+2/CnH2n ratio of 1-3, and this observation can be explained through the process of C-C coupling chain growth of the conventional FT synthesis, based on the linearity of the Anderson-Schulz-Flory equation plots. Thick Sn and In overlayers resulted in the dominant production of formate, while CO and C2H4 production were found to be proportional and inversely correlated to H2, C2H6, and C3-7 hydrocarbon production. The EC CO2/CO reduction used in dEC FT synthesis offers valuable insights into the mechanism of C2+ production and holds promise as an eco-friendly approach to producing long-chain hydrocarbons for energy and environmental purposes.

The Effect of Bismuth and Tin on Methane and Acetate Production in a Microbial Electrosynthesis Cell Fed with Carbon Dioxide

This study investigates the impacts of bismuth and tin on the production of CH4 and volatile fatty acids in a microbial electrosynthesis cell with a continuous CO2 supply. First, the impact of several transition metal ions (Ni2+, Fe2+, Cu2+, Sn2+, Mn2+, MoO42-, and Bi3+) on hydrogenotrophic and acetoclastic methanogenic microbial activity was evaluated in a series of batch bottle tests incubated with anaerobic sludge and a pre-defined concentration of dissolved transition metals. While Cu is considered a promising catalyst for the electrocatalytic conversion of CO2 to short chain fatty acids such as acetate, its presence as a Cu2+ ion was demonstrated to significantly inhibit the microbial production of CH4 and acetate. At the same time, CH4 production increased in the presence of Bi3+ (0.1 g L-1) and remained unchanged at the same concentration of Sn2+. Since Sn is of interest due to its catalytic properties in the electrochemical CO2 conversion, Bi and Sn were added to the cathode compartment of a laboratory-scale microbial electrosynthesis cell (MESC) to achieve an initial concentration of 0.1 g L-1. While an initial increase in CH4 (and acetate for Sn2+) production was observed after the first injection of the metal ions, after the second injection, CH4 production declined. Acetate accumulation was indicative of the reduced activity of acetoclastic methanogens, likely due to the high partial pressure of H2. The modification of a carbon-felt electrode by the electrodeposition of Sn metal on its surface prior to cathode inoculation with anaerobic sludge showed a doubling of CH4 production in the MESC and a lower concentration of acetate, while the electrodeposition of Bi resulted in a decreased CH4 production.

Metallic 1T-N-WS2 /WO3 Heterojunctions Featuring Interface-Engineered Cu-S Configuration for Selective Electrochemical CO2 Reduction Reaction

Electrocatalytic carbon-dioxide reduction reactions (ECO2 RR) are one of the most rational techniques to control one's carbon footprint. The desired product formation depends on deliberate reaction kinetics and a choice of electron-proton contribution. Herein the usage of novel CuS active centers decorated over stable 1T metallic N-WS2 /WO3 nanohybrids as an efficient selective formate conversion electrocatalyst with regard to ECO2 RR is reported. The preferred reaction pathway is identified as *OCHO, which is reduced (by gaining H+  + e- ) to HCOO- (HCOO- path) as the primary product. More significantly, at -1.3 V versus RHE yield of FEHCOO - is 55.6% ± 0.5 with a Jgeo of -125.05 mA cm-2 for CuS@1T-N-WS2 /WO3 nanohybrids. In addition, predominant catalytic activity, selectivity, and stability properties are observed; further post-mortem analysis demonstrates the choice of material importance. The present work describes an impressive approach to develop highly active electrocatalysts for selective ECO2 RR applications.