Sol-Gel-Derived Ordered Mesoporous High Entropy Spinel Ferrites and Assessment of Their Photoelectrochemical and Electrocatalytic Water Splitting Performance

In-situ Hf/Zr co-doped Fe2O3 nanorod decorated with CuOx/CoOx: Enhanced photocatalytic performance for antibacterial and organic pollutants

Herein, we successfully synthesized Hf/Zr co-doping on Fe2O3 nanorod photocatalyst by a hydrothermal process and quenching methods. The synergistic roles of Hf and Zr double-doping on the bacteria inactivation test and decomposition of organic pollutants were investigated in detail for the 1 wt% CoOx loaded Hf/Zr-Fe2O3 NRs and CuOx/CoOx loaded Hf/Zr-Fe2O3 NRs photocatalyst. Initially, the rod-like porous morphology of the Hf/Zr-doped Fe2O3 NRs was produced via a hydrothermal method at various Hf co-doping (0, 2, 4, 7 and 10)%. Further, CoOx and CuOx loaded by a wet impregnation approach on the Hf/Zr-Fe2O3 NRs and a highly photoactive Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst were developed. After the Hf(4)/Zr-Fe2O3 [CoOx/CuOx] NRs photocatalyst treatment, the Bio-TEM imagery of bacterial cells showed extensive morphological deviations in cell membranes. Hf(4)/Zr-Fe2O3 NR achieved 84.1% orange II degradation upon 3 h illumination, which is higher than that of Hf-Fe2O3 and Zr-Fe2O3 (68.7 and 73.5%, respectively). Additionally, the optimum sample, Hf(4)/Zr-Fe2O3 [CoOx/CuOx] photocatalyst, exhibited 95.5% orange II dye degradation after light radiation for 3 h. Optimized Hf(4)/Zr-Fe2O3 [CoOx/CuOx] catalysts exhibited 99.9% and 99.7% inactivation of E. coli and S. aureus with 120 min, respectively. Further, scavenger experiments revealed that the electrons are the primary responsible species for photocatalytic kinetics. This work will provide a rapid method for the development of high photocatalytic performance materials for bacterial disinfection and organic degradation.

On the structural evolution of nanoporous optically transparent CuO photocathodes upon calcination for photoelectrochemical applications

Copper oxides are promising photocathode materials for solar hydrogen production due to their narrow optical band gap energy allowing broad visible light absorption. However, they suffer from severe photocorrosion upon illumination, mainly due to copper reduction. Nanostructuring has been proven to enhance the photoresponse of CuO photocathodes; however, there is a lack of precise structural control on the nanoscale upon sol-gel synthesis and calcination for achieving optically transparent CuO thin film photoabsorbers. In this study, nanoporous and nanocrystalline CuO networks were prepared by a soft-templating and dip-coating method utilizing poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronic® F-127) as a structure-directing agent, resulting for the first-time in uniformly structured, crack-free, and optically transparent CuO thin films. The photoelectrochemical properties of the nanoporous CuO frameworks were investigated as a function of the calcination temperature and film thickness, revealing important information about the photocurrent, photostability, and photovoltage. Based on surface photovoltage spectroscopy (SPV), the films are p-type and generate up to 60 mV photovoltage at 2.0 eV (0.050 mW cm-2) irradiation for the film annealed at 750 °C. For these high annealing temperatures, the nanocrystalline domains in the thin film structure are more developed, resulting in improved electronic quality. In aqueous electrolytes with or without methyl viologen (as a fast electron acceptor), CuO films show cathodic photocurrents of up to -2.4 mA cm-2 at 0.32 V vs. RHE (air mass (AM) 1.5). However, the photocurrents were found to be entirely due to photocorrosion of the films and decay to near zero over the course of 20 min under AM 1.5 illumination. These fundamental results on the structural and morphological development upon calcination provide a direction and show the necessity for further (surface) treatment of sol-gel derived CuO photocathodes for photoelectrochemical applications. The study demonstrates how to control the size of nanopores starting from mesopore formation at 400 °C to the evolution of macroporous frameworks at 750 °C.

Surface Adsorption and Photoinduced Degradation: A Study of Spinel Ferrite Nanomaterials for Removal of a Model Organic Pollutant from Water

Spinel oxide nanocrystals are attractive materials for photoinduced advanced oxidation processes that degrade organic pollutants in water due to their chemical stability and tunability, visible light absorption, and magnetic recoverability. However, a systematic understanding of the structural and chemical factors that control the reactivity of specific spinel oxide nanocrystal materials toward photoinduced degradation processes is lacking. This Perspective illustrates these knowledge gaps through an investigation into the impacts of surface chemistry and composition of spinel ferrite nanocrystals of formula MFe2O4 (M = Mg, Fe, Co, Ni, Cu, Zn) on their ability to remove a model organic pollutant (methyl orange (MO)) from water. We identify two mechanisms by which the nanocrystals remove MO from water: (i) surface adsorption and (ii) photoinduced degradation under visible light irradiation in the presence of hydrogen peroxide via the photo-Fenton reaction. Nanocrystals that do not contain any surface ligands are more effective at removing MO from water than nanocrystals that contain surface ligands, despite our observation that the ligand-less nanocrystals do not form stable colloidal dispersions in water, while ligand-coated nanocrystals are colloidally stable. For many of the spinel ferrite compositions studied here, the fraction of methyl orange removal via adsorption to the nanocrystal surface in the absence of photoexcitation is larger than the fraction removed under irradiation. Our data indicate that the composition-dependent surface charge of the nanocrystals controls the degree of surface adsorption of the charged MO molecule. Overall, these results demonstrate that careful consideration of the impacts of surface chemistry on the behavior of spinel ferrite nanocrystals is required to accurately assess and subsequently understand their activity toward the photoinduced degradation of organic molecules.

Hollow-Structured and Polyhedron-Shaped High Entropy Oxide toward Highly Active and Robust Oxygen Evolution Reaction in a Full pH Range

High entropy metal oxides (HEO) are superior to many reactions involving multi-step elementary reactions. However, controlled synthesis of hollow-structured HEO catalysts, which offers large surface area and fast mass transfer kinetics, remains challenging and unexplored due to the complicated metal precursors. Herein, a metal organic framework-templated synthesis of hollow-structured and polyhedron-shaped HEO catalysts assembled with ultra-small nanoparticles, with up to ten metal elements, can be achieved, by taking advantage of the ion-exchange method. ZnFeNiCuCoRu-O HEO catalyst displays excellent activity and ultra-stability for oxygen evolution reaction in full pH range, with an overpotential of 170 mV at a current density of 10 mA cm-2 , a Tafel slope of 56 mV dec-1 , and a decay of activity by 7% in 30 h in alkaline medium, as well as a 12% and 8% decay in acidic and neutral medium, respectively. DFT calculation indicates that the energy barrier of the potential determining step on Ru-Fe bridge site is significantly lower than any other Ru-related bridge sites for the unique hollow structured HEO structures. This work highlights the importance of ion-exchange method in preparing highly stable and active hollow-structured HEOs catalysts toward highly efficient energy conversion and storage devices.

The facile synthesis of and light-driven water splitting on a hetero-metallic bismuth oxide catalyst

The process of water photo-electrolysis possesses the capability to generate sustainable and renewable hydrogen fuels, consequently addressing the challenge of the irregularity of solar energy. Thus, developing highly-efficient and low-cost electrocatalysts for the use in contemporary renewable energy devices is critical. Herein, we report the fabrication of a novel BaCeFex-yBixO6 nanocrystalline material through a one-step solvothermal route using a post-annealing process at 500 °C. The synthesized material was investigated for its light-induced electrochemical HER and OER activities in alkaline media and the results revealed that the as-prepared BaCeFex-yBixO6-500 °C exhibited an excellent OER activity with an overpotential of 100 mV to achieve a current density of 10 mA cm-2, thus outperforming the IrO2 electrocatalyst. Besides its excellent water oxidation performance, the catalyst also demonstrated an admirable HER activity comparable to that of the Pt/C catalyst, indicating that the higher temperature treatment plays a significant role in achieving the maximum performance of the developed electrocatalyst. This work provides insights into the enhancement of light-induced OER and HER activities of bismuth oxides for a wide range of catalytic applications.

Modulating metal-support interaction and inducing electron-rich environment of Ni2P NPs by B atoms incorporation for enhanced hydrogen evolution reaction performance

Modulation of the electronic interaction between the metal and support has been verified as a feasible strategy to improve the electrocatalytic performance of supported-type catalysts. Here, we have successfully synthesized an electrocatalyst of Ni2P nanoparticles (NPs) anchored on B, N co-doped graphite-like carbon nanosheets (Ni2P@B, N-GC), and elucidated the main mechanism by which B atoms doping enhances electrocatalytic hydrogen evolution reaction (HER) performance. The B atoms with electron-rich characteristic not only modulate the electronic structure on carbon skeleton, but also regulate the interfacial electronic interaction between Ni2P NPs and the carbon skeleton, which can lead to the increased available electron density of Ni sites. Such optimization is conducive to accelerating proton transfer and promoting reactive activity. As revealed, the Ni2P@B, N-GC catalyst with B atoms doping exhibits superior performance to the Ni2P@N-GC catalyst in acidic, neutral and alkaline medias. In addition, the assembled Ni(OH)2@B, N-GC||Ni2P@B, N-GC electrolyzer displays prominent overall water splitting performance in alkaline solution, which only demands 1.57 V to reach 10 mA/cm2, and in complicated natural seawater electrolyte, as low as 1.59 V. Hence, the B atoms doping strategy shows the significant enhancement for HER electrocatalysis.

Self-Floating Nanoporous High-Entropy Oxides with Tunable Bandgap for Efficient Solar Seawater Desalination

Nanoporous high-entropy oxide (np-HEO) powders with tunable composition are integrated with a poly(vinylidene fluoride) network to create self-floating solar absorber films for seawater desalination. By progressively increasing the element count, we obtain an optimized 9-component AlNiCoFeCrMoVCuTi-Ox. Density functional theory (DFT) calculations reveal a remarkable reduction in its bandgap, facilitating the light-induced migration of electrons to conduction bands to generate electron-hole pairs, which recombine to produce heat. Simultaneously, the intricate light reflection and refraction pathways, shaped by the nanoporous structure, coupled with the reduced thermal conductivity attributed to the suboptimal crystalline quality of the np-HEO ensure an effective conversion of captured light into thermal energy. Consequently, all these films demonstrate an impressive absorbance rate exceeding 93% across the 250-2500 nm spectral range. Under one sun, the surface temperature of the 9-component film rapidly rises to 110 °C within 90 s with a high pure water evaporation rate of 2.16 kg m-2 h-1.

Electrodeposition of Self-Supported High-Entropy Spinel Oxides for Stable Oxygen Evolution

Spinel oxides have attracted increasing interest due to their excellent activity in the oxygen evolution reaction (OER). However, despite the high intrinsic OER activity, their poor electrical conductivity and weak structural stability prevented their application for a long time. These shortcomings can be solved by effectively adjusting the electronic structures of spinel oxides through a high-entropy strategy. Herein, a rapid two-step method was developed to prepare self-supported high-entropy spinel-type oxides on a carbon cloth (CC) to yield (Fe0.2Co0.2Ni0.2Mn0.2Cr0.2)3O4@CC (abbreviated as FeCoNiMnCr@CC). The unique electronic structure and stable crystal configuration of the resulting FeCoNiMnCr@CC materials required only an overpotential of 287 mV for the OER at a current density of 10 mA cm-2 coupled with excellent cyclic stability. In summary, the proposed high-entropy strategy looks promising for improving the catalytic performance of spinel oxides.

Conductometric Flexible CuO-Based Sweat-Loss Monitoring Sensor for Future Wearable Technology in Healthcare

Healthcare tracking supports early diagnosis of illnesses, real-time tracking of the impacts of therapy and treatment, and tracking of cases of human health. Based on this, real-time tracking of sweat loss provides an easy, convenient, and noninvasive approach to the early diagnosis of physical illness in individuals. To date, copper oxide (CuO) as a nanostructured semiconductor metal-oxide is regarded as a hopefully p-type sensing material. The corresponding sweat rate monitoring systems were fabricated using a repeatable and cost-effective SILAR system using a cellulose acetate-based organic substrate. To provide a practical application, we investigated the working efficiency of Al:CuO under room conditions since most clinical and healthcare industries operate under ambient temperature. Fabricated flexible devices immediately respond to the implementation of the sweat solution and reach a steady-state value in a short time. It can be obtained from experimental results that the sweat-loss monitoring performances of CuO-based devices can be enhanced by employing Al-doping. The increment in the sensing efficacy was interpreted in terms of structural and morphological characterization and electrical data. Our designed flexible thin film-based system can be used in conjunction with a customized wearable, healthcare industry integrated, low-cost fabrication source.

Mesoporous CuFe2 O4 Photoanodes for Solar Water Oxidation: Impact of Surface Morphology on the Photoelectrochemical Properties

Metal oxide-based photoelectrodes for solar water splitting often utilize nanostructures to increase the solid-liquid interface area. This reduces charge transport distances and increases the photocurrent for materials with short minority charge carrier diffusion lengths. While the merits of nanostructuring are well established, the effect of surface order on the photocurrent and carrier recombination has not yet received much attention in the literature. To evaluate the impact of pore ordering on the photoelectrochemical properties, mesoporous CuFe₂ O₄ (CFO) thin film photoanodes were prepared by dip-coating and soft-templating. Here, the pore order and geometry can be controlled by addition of copolymer surfactants poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronic® F-127), polyisobutylene-block-poly(ethylene oxide) (PIB-PEO) and poly(ethylene-co-butylene)-block-poly(ethylene oxide) (Kraton liquid™-PEO, KLE). The non-ordered CFO showed the highest photocurrent density of 0.2 mA/cm² at 1.3 V vs. RHE for sulfite oxidation, but the least photocurrent density for water oxidation. Conversely, the ordered CFO presented the best photoelectrochemical water oxidation performance. These differences can be understood on the basis of the high surface area, which promotes hole transfer to sulfite (a fast hole acceptor), but retards oxidation of water (a slow hole acceptor) due to electron-hole recombination at the defective surface. This interpretation is confirmed by intensity-modulated photocurrent (IMPS) and vibrating Kelvin probe surface photovoltage spectroscopy (VKP-SPS). The lowest surface recombination rate was observed for the ordered KLE-based mesoporous CFO, which retains spherical pore shapes at the surface resulting in fewer surface defects. Overall, this work shows that the photoelectrochemical energy conversion efficiency of copper ferrite thin films is not just controlled by the surface area, but also by surface order.