Improving the Oxygen Evolution Activity of Layered Double-Hydroxide via Erbium-Induced Electronic Engineering

Hybridization of bimetallic cobalt-molybdenum oxide multihole nanosheets with selenium adulteration as advanced bifunctional electrocatalysts for boosting overall water splitting

Electrocatalytic water splitting produces green and pollution-free hydrogen as a clean energy carrier, which can effectively alleviate energy crisis. In this paper, bimetallic and selenium doped cobalt molybdate (Se-CoMoO4) nanosheets with rough surface are resoundingly prepared. The multihole Se-CoMoO4 nanosheets display ultrathin and rectangular architecture with the dimensions of ∼ 3.5 μm and 700 nm for length and width, respectively. The Se-CoMoO4 electrocatalyst shows remarkable water electrolysis activity and stability. The overpotentials of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are 270 and 63.3 mV at 10 mA cm-2, along with low Tafel slopes of 51.6 and 62.0 mV dec-1. Furthermore, the Se-CoMoO4 couple electrolyzer merely requires a cell voltage of 1.48 V to achieve 10 mA cm-2 current density and presents no apparent attenuation for 30 h. This investigation declares that the hybridization of transition bimetallic oxide with nonmetallic adulteration can afford a tactic for the preparation of bifunctional non-precious metal-based electrocatalysts.

Ce-4f as an electron-modulation reservoir weakening Fe-O bond to induce iron vacancies in CeFevNi hydroxide for enhancing oxygen evolution reaction

Designing novel rare-earth-transition metal composites is at the forefront of electrocatalyst research. However, the modulation of transition metal electronic structures by rare earths to induce vacancy defects and enhance electrochemical performance has rarely been reported. In this study, we systematically investigate the mechanism by which Ce-4f electron modulation weakens the Fe-O bond, thereby altering the electronic structure in CeFevNi hydroxide to improve oxygen evolution reaction (OER) performance. Theoretical calculations and experimental characterizations reveal that Ce-4f orbitals function as electron-modulation reservoirs, capable not only of retaining or donating electrons but also of influencing the material's electronic structure. Moreover, Ce-4f bands optimize the Fe lower Hubbard bands (LHB) and O-2p bands, leading to weakened Fe-O bonds and the formation of cationic vacancies. This change results in the upshift of the d-band center at the active sites, favoring the reaction energy barrier for oxygen intermediates in the OER process. The synthesized catalyst demonstrated an overpotential of 201 mV at 10 mA cm-2 and a lifetime exceeding 200 h at 100 mA cm-2 under alkaline conditions. This work offers a proof-of-concept for the application of the mechanism of rare earth-induced transition metal vacancy defects, providing a general guideline for the design and development of novel highly efficient catalysts.

Unleashing unprecedented activation of high-valent Ni and Fe charge dynamics in CeF3-NiFe layered double hydroxide heterostructure: Demonstrating oxygen evolution reaction at an extremely high current density

The efficacy of any electrochemical reaction hinges on the extent of interaction achievable between reactive intermediates and the electrocatalytic active site. Any weak adsorption of these intermediates on the metal's active site results in low oxygen evolution reaction (OER) rates, mainly when catalysed by the Ni-based layered double hydroxide. To tackle this challenge, a heterojunction consisting of nickel-iron layered double hydroxide (NiFe-LDH) and cerium trifluoride (CeF3) is synthesized. Both phases were developed in-situ to have an abundance of heterointerfaces. The charge transfer amid the NiFe-LDH and CeF3 phases is brought about via these heterointerfaces. As a result, the overall charge dynamics associated with nickel (Ni) and iron (Fe) atoms are somewhat increased, and an enhanced positive charge on the metal site makes it more active in grabbing the reactive species, thereby making the entire OER process faster. The CeF3-NiFeLDH catalyst reaches a current density of 1000 mA cm-2 at an overpotential of 340 mV. Such a high current density is highly significant for the industrial-scale production of the products. The catalyst demonstrated impressive durability, maintaining stable performance for 90 h while operating at 500 mA cm-2. The charge dynamics between both phases were thoroughly examined using X-ray photoelectron spectroscopy (XPS).

Design of Mg-Ni binary single-atom catalysts for conversion of carbon dioxide to syngas with a wide tunable ratio: Each species doing its own job or working together to win?

Electrochemical carbon dioxide reduction reaction (eCO2RR) to generate syngas is an appealing strategy for CO2 net reduction. However, it suffers from the inferior faradaic efficiency (FE), selectivity, and difficult modulation of hydrogen/carbon monoxide (H2/CO) ratio. To address these issues, a series of magnesium-nickel (Mg-Ni) dual atomic catalysts with different Ni contents are fabricated on the nitrogen-doped carbon matrix (MgNiX-NC DACs) by one-step pyrolysis. MgNi5-NC electrocatalyst generates 0.51-0.79 H2/CO ratios in a potential range of -0.6 to -1.0 V vs. reversible hydrogen electrode (RHE) and the total FE reaches 100 % with good stability. While a wider range of H2/CO (0.95-4.34) is achieved for MgNi3-NC electrocatalyst in the same overpotential range, which is suitable for typical downstream thermochemical reactions. Introduction of Ni species accelerates the generation of CO, however, there is much less influence on the H2 production as compared with Mg-based single atomic electrocatalyst. According to the experimental results and density functional theory (DFT) calculations, the synergistic effect between Mg and Ni achieves the satisfied results rather than each one fulfill its own duty for selective producing H2 and CO, respectively. This work introduces a feasible approach to develop atomic catalysts on main group metal for more controllable CO2RR.

Ultrasonic-assisted Fenton reaction inducing surface reconstruction endows nickel/iron-layered double hydroxide with efficient water and organics electrooxidation

Nickel/iron-layered double hydroxide (NiFe-LDH) tends to undergo an electrochemically induced surface reconstruction during the water oxidation in alkaline, which will consume excess electric energy to overcome the reconstruction thermodynamic barrier. In the present work, a novel ultrasonic wave-assisted Fenton reaction strategy is employed to synthesize the surface reconstructed NiFe-LDH nanosheets cultivated directly on Ni foam (NiFe-LDH/NF-W). Morphological and structural characterizations reveal that the low-spin states of Ni2+ (t2g6eg2) and Fe2+ (t2g4eg2) on the NiFe-LDH surface partially transform into high-spin states of Ni3+ (t2g6eg1) and Fe3+ (t2g3eg2) and formation of the highly active species of NiFeOOH. A lower surface reconstruction thermodynamic barrier advantages the electrochemical process and enables the NiFe-LDH/NF-W electrode to exhibit superior electrocatalytic water oxidation activity, which delivers 10 mA cm-2 merely needing an overpotential of 235 mV. Besides, surface reconstruction endows NiFe-LDH/NF-W with outstanding electrooxidation activities for organic molecules of methanol, ethanol, glycerol, ethylene glycol, glucose, and urea. Ultrasonic-assisted Fenton reaction inducing surface reconstruction strategy will further advance the utilization of NiFe-LDH catalyst in water and organics electrooxidation.

Boosting Oxygen Evolution Reaction Performance on NiFe-Based Catalysts Through d-Orbital Hybridization

Anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant NiFe-based catalysts. By introducing a third metal into NiFe-based catalysts to construct asymmetrical M-NiFe units, the d-orbital and electronic structures can be adjusted, which is an important strategy to achieve sufficient oxygen evolution reaction (OER) performance in AEMWEs. Herein, the ternary NiFeM (M: La, Mo) catalysts featured with distinct M-NiFe units and varying d-orbitals are reported in this work. Experimental and theoretical calculation results reveal that the doping of La leads to optimized hybridization between d orbital in NiFeM and 2p in oxygen, resulting in enhanced adsorption strength of oxygen intermediates, and reduced rate-determining step energy barrier, which is responsible for the enhanced OER performance. More critically, the obtained NiFeLa catalyst only requires 1.58 V to reach 1 A cm-2 in an anion exchange membrane electrolyzer and demonstrates excellent long-term stability of up to 600 h.

Advances in Stability of NiFe-Based Anodes toward Oxygen Evolution Reaction for Alkaline Water Electrolysis

Alkaline electrolysis plays a crucial role in sustainable energy solutions by utilizing electrolytic cells to produce hydrogen gas, providing a clean and efficient method for energy storage and conversion. Efficient, stable, and low-cost electrocatalysts for the oxygen evolution reaction (OER) are essential to facilitate alkaline water electrolysis on a commercial scale. Nickel-iron-based (NiFe-based) transition metal electrocatalysts are considered the most promising non-precious metal catalysts for alkaline OER due to their low cost, abundance, and tunable catalytic properties. Nevertheless, the majority of existing NiFe-based catalysts suffer from limited activity and poor stability, posing a significant challenge in meeting industrial applications. This also highlights a common situation where the emphasis on material activity receives significant attention, while the equally critical stability aspect is often underemphasized. Initiating with a comprehensive exploration of the stability of NiFe-based OER materials, this article first summarizes the debate surrounding the determination of active sites in NiFe-based OER electrocatalysts. Subsequently, the degradation mechanisms of recently reported NiFe-based electrocatalysts are outlined, encompassing assessments of both chemical and mechanical endurance, along with essential approaches for enhancing their stability. Finally, suggestions are put forth regarding the essential considerations for the design of NiFe-based OER electrocatalysts, with a focus on heightened stability.

Synergistic Sr Activation and Cr Buffering Effect on RuO2 Electronic Structures for Enhancing the Acidic Oxygen Evolution Reaction

The oxygen evolution reaction (OER) performance of ruthenium-based oxides strongly correlates with the electronic structures of Ru. However, the widely adopted monometal doping method unidirectionally regulates only the electronic structures, often failing to balance the activity and stability. Here, we propose an "elastic electron transfer" strategy to achieve bidirectional optimization of the electronic structures of Sr, Cr codoped RuO2 catalysts for acidic OER. The introduction of electron-withdrawing Sr intrinsically activates the Ru sites by increasing the oxidation state of Ru. Simultaneously, Cr acts as an electron buffer, donating electrons to Ru in the presence of Sr in the as-prepared catalysts and absorbing excess electrons from Sr leaching during the OER. Such a bidirectional regulation feature of Cr prevents overoxidation of Ru and maintains its high oxidation state during the OER. The optimal Ru3Cr1Sr0.175 catalyst exhibits a low overpotential (214 mV @ 10 mA cm-2) and excellent stability (over 300 h).

Amorphous P-CoOX Promotes the Formation of Hypervalent Ni Species in NiFe LDHs by Amorphous/Crystalline Interfaces for Excellent Catalytic Performance of Oxygen Evolution Reaction

Water electrolysis has become an attractive hydrogen production method. Oxygen evolution reaction (OER) is a bottleneck of water splitting as its four-electron transfer procedure presents sluggish reaction kinetics. Designing composite catalysts with high performance for efficient OER still remains a huge challenge. Here, the P-doped cobalt oxide/NiFe layered double hydroxides (P-CoOX/NiFe LDHs) composite catalysts with amorphous/crystalline interfaces are successfully prepared for OER by hydrothermal-electrodeposition combined method. The results of electrochemical characterizations, operando Raman spectra, and DFT theoretical calculations have demonstrated the electrons in the P-CoOX/NiFe LDHs heterointerfaces are easily transferred from Ni2+ to Co3+ because that the amorphous configuration of P-CoOX can well induce Ni-O-Co orbital coupling. The electron transfer of Ni2+ to the surrounding Fe3+ and Co3+ will lead to the unoccupied eg orbitals of Ni3+ that can promote water dissociation and accelerate *OOH migration to improve OER catalytic performance. The optimized P-CoOX/NiFe LDHs exhibit superior catalytic performance for OER with a very low overpotential of 265 mV at 300 mA cm-2 and excellent long-term stability of 500 h with almost no attenuation at 100 mA cm-2. This work will provide a new method to design high-performance NiFe LDHs-based catalysts for OER.

4f-2p-3d Orbital Coupling in Ce-Ni3S2 Enhancing the Urea Oxidation Reaction

The electrocatalytic urea oxidation reaction (UOR) provides a promising alternative to the oxygen evolution reaction (OER) for various renewable energy-related systems owing to its lower thermodynamic barriers. However, its optimization and commercial utilization were hampered due to a lack of mechanistic understanding. Here, we demonstrate a Ce-doped Ni3S2 catalyst supported on Ni foam (Ce-Ni3S2/NF) with superior activity toward UOR. The resultant Ce-Ni3S2/NF catalyst exhibits a lower Tafel slope of 20.3 mV dec-1, a higher current density of 100 mA cm-2 at 1.39 V versus RHE, and better durability than those for Ni3S2/NF. Based on in situ synchrotron radiation X-ray absorption spectroscopy, in situ Fourier transform infrared (FTIR), and in situ Raman spectroscopy, we observe the structural reconstruction of sulfide and identify the adsorbed intermediates during UOR. Density functional theory (DFT) calculations reveal that Ce can regulate the electronic structure of Ni through Ce(4f)-O(2p)-Ni(3d) orbital electronic coupling. The modulated Ni sites have weaker adsorption of carbonaceous intermediates, thus accelerating the UOR. This work provides a promising route for the design of high-activity UOR catalysts.

Energizing Co Active Sites via d-Band Center Engineering in CeO2-Co3O4 Heterostructures: Interfacial Charge Transfer Enabling Efficient Nitrate Electrosynthesis

The electrochemical nitrogen oxidation reaction (NOR) holds significant potential to revolutionize the traditional nitrate synthesis processes. However, the progression in NOR has been notably stymied due to the sluggish kinetics of initial N2 adsorption and activation processes. Herein, the research embarks on the development of a CeO2-Co3O4 heterostructure, strategically engineered to facilitate the electron transfer from CeO2 to Co3O4. This orchestrated transfer operates to amplify the d-band center of the Co active sites, thereby enhancing N2 adsorption and activation dynamics by strengthening the Co─N bond and diminishing the resilience of the N≡N bond. The synthesized CeO2-Co3O4 manifests promising prospects, showcasing a significant HNO3 yield of 37.96 µg h-1 mgcat -1 and an elevated Faradaic efficiency (FE) of 29.30% in a 0.1 m Na2SO4 solution at 1.81 V versus RHE. Further substantiating these findings, an array of in situ methodologies coupled with DFT calculations vividly illustrate the augmented adsorption and activation of N2 on the surface of CeO2-Co3O4 heterostructure, resulting in a substantial reduction in the energy barrier pertinent to the rate-determining step within the NOR pathway. This research carves a promising pathway to amplify N2 adsorption throughout the electrochemical NOR operations and delineates a blueprint for crafting highly efficient NOR electrocatalysts.

Role of amorphous engineering and cerium doping in NiFe oxyhydroxide for electrocatalytic water oxidation

Amorphous engineering and atomistic doping provide an effective way to improve the catalytic activity in the oxygen evolution reaction (OER) of transition metal layered double hydroxides. Herein, Cerium (Ce) was introduced into NiFe-based oxyhydroxide using a modified aqueous sol-gel procedure. Ce as an electron acceptor promoted the coupling oxidation of Ni2+/3+ in NiFe oxyhydroxide, and the activated oxyhydroxide showed excellent catalytic activity in OER. The amorphous NiFeCe oxyhydroxide electrocatalyst demonstrated great modified OER catalytic activity under alkaline conditions and excellent cyclic stability, with an overpotential of only 284 mV at 50 mA cm-2, which was significantly better than amorphous NiFe oxyhydroxide and crystalline NiFeCe oxyhydroxide. Theoretical investigations further indicated that the overpotential of the rate-determining step (*OOH deprotonation) decreased from 0.66 to 0.41 V after Ce doping and strong electron interaction, effectively reducing the dependence of proton activity in the solution of OER, and optimizing the adsorption/desorption process of related oxygen-containing species in the reaction. This work also provides a good reference for optimizing OER activity by using rare-earth-metal induced electronic regulation strategies.

Shifting the Oxygen-Evolution Reaction Pathway via Cation Engineering to Activate Lattice Oxygen in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) as promising electrocatalysts have been widely studied, but their performance is limited by conductivity and coordinating saturation. This study proposes a cationic (V) modification strategy and evaluates its effect on the electrocatalytic performance of CoFe-MOF nanosheet arrays. The optimal V-CoFe-MOF/NF electrocatalyst exhibits excellent oxygen-evolution reaction (OER)/hydrogen-evolution reaction (HER) performance (231 mV at 100 mA cm-2/86 mV at 10 mA cm-2) in alkaline conditions, with its OER durability exceeding 400 h without evident degradation. Furthermore, as a bifunctional electrocatalyst for water splitting, a small cell voltage is achieved (1.60 V at 10 mA cm-2). The practicability of the catalyst is further evaluated by membrane electrode assembly (MEA), showing outstanding activity (1.53 V at 10 mA cm-2) and long-term stability (at 300 mA cm-2). Moreover, our results reveal the apparent reconstruction properties of V-CoFe-MOF/NF in alkaline electrolytes, where the partially dissolved V promotes the formation of more active β-MOOH. The mechanism study shows the OER mechanism shifts to a lattice oxygen oxidation mechanism (LOM) after V doping, which directly avoids complex multistep adsorption mechanism and reduces reaction energy. This study provides a cation mediated strategy for designing efficient electrocatalysts.

Production of H2 and Glucaric Acid Using Electrocatalyst Glucose Oxidation by the Ta NiFe LDH Electrode

The slow anodic oxygen evolution reaction (OER) significantly limits electrocatalytic water splitting for hydrogen production. We proposed the electrocatalyst for glucose oxidation by Ta-doping NiFe LDH nanosheets to simultaneously obtain glucaric acid (GRA) and hydrogen gas as a useful byproduct. Superior glucose oxidation reaction (GOR) activity is demonstrated by the optimized Ta-NiFe LDH, which has a low overpotential of 192 mV, allowing for a small Tafel slope of 70 mV dec-1 and a current density of 50 mA cm-2. The Ta NiFe LDH-oxidized glucose to GRA with a 72.94% yield and 64.3% Faradaic efficiency at 1.45 VRHE. Herein, we report the Ta NiFe LDH/NF electrode for the GOR&hydrogen evolution reaction (HER), which exhibits a cell voltage of 1.62 V to reach a current density of 10 mA cm-2, which is 250 mV lower compared to OER&HER (1.87 V). This study reveals that GOR is an energy-efficient and cost-effective method for producing H2 and valorizing biomass.

A Doping-Induced SrCo0.4Fe0.6O3/CoFe2O4 Nanocomposite for Efficient Oxygen Evolution in Alkaline Media

Perovskite and spinel oxides are promising alternatives to noble metal-based electrocatalysts for oxygen evolution reaction (OER). Herein, a novel perovskite/spinel nanocomposite comprised of SrCo0.4Fe0.6O3 and CoFe2O4 (SCF/CF) is prepared through a simple one-step method that incorporates iron doping into a SrCoO3- δ matrix, circumventing complex fabrication processes typical of these materials. At a Fe dopant content of 60%, the CoFe2O4 spinel phase is directly precipitated from the parent SrCo0.4Fe0.6O3 perovskite phase and the number of active B-site metals (Co/Fe) in the parent SCF can be maximized. This nanocomposite exhibits a remarkable OER activity in alkaline media with a small overpotentional of 294 mV at 10 mA cm-2. According to surface states analysis, the parent SCF perovskite remains in its pristine form under alkaline OER conditions, serving as a stable substrate, while the second spinel CF is covered by 5/8 monolayer (ML) O*, exhibiting considerable affinity toward the oxygen species involved in the OER. Analysis based on advanced OER microkinetic volcano model indicates that a 5/8 ML O* covered-CF is the origin for the remarkable activity of this nanocomposite. The results reported here significantly advance knowledge in OER and can boost application, scale-up and commercialisation of electrocatalytic technologies toward clean energy devices.

Highly Stable Mo-NiO@NiFe-Layered Double Hydroxide Heterojunction Anode Catalyst for Alkaline Electrolyzers with Porous Membrane

Heterostructure catalysts are considered as promising candidates for promoting the oxygen evolution reaction (OER) process due to their strong electron coupling. However, the inevitable dissolution and detachment of the heterostructure catalysts are caused by the severe reconstruction, dramatically limiting their industrial application. Herein, the NiFe-layered double hydroxide (LDH) nanosheets attached on Mo-NiO microrods (Mo-NiO@NiFe LDH) by the preoxidation strategy of the core NiMoN layer are synthesized for ensuring the high catalytic performance and stability. Owing to the enhanced electron coupling and preoxidation process, the obtained Mo-NiO@NiFe LDH exhibits a superlow overpotential of 253 mV to achieve a practically relevant current density of 1000 mA cm-2 for OER with exceptional stability over 1200 h. Notably, the overall water splitting system based on Mo-NiO@NiFe LDH reveals remarkable stability, maintaining the catalytic activity at a current density of 1000 mA cm-2 for 140 h under industrial harsh conditions. Furthermore, the Mo-NiO@NiFe LDH demonstrates outstanding activity and long-term durability in a practical alkaline electrolyzer assembly with a porous membrane, even surpassing the performance of IrO2. This work provides a new sight for designing and synthesizing highly stable heterojunction electrocatalysts, further promoting and realizing the industrial electrocatalytic OER.

Rare-earth Element-based Electrocatalysts Designed for CO2 Electro-reduction

Electrochemical CO2 reduction presents a promising approach for synthesizing fuels and chemical feedstocks using renewable energy sources. Although significant advancements have been made in the design of catalysts for CO2 reduction reaction (CO2RR) in recent years, the linear scaling relationship of key intermediates, selectivity, stability, and economical efficiency are still required to be improved. Rare earth (RE) elements, recognized as pivotal components in various industrial applications, have been widely used in catalysis due to their unique properties such as redox characteristics, orbital structure, oxygen affinity, large ion radius, and electronic configuration. Furthermore, RE elements could effectively modulate the adsorption strength of intermediates and provide abundant metal active sites for CO2RR. Despite their potential, there is still a shortage of comprehensive and systematic analysis of RE elements employed in the design of electrocatalysts of CO2RR. Therefore, the current approaches for the design of RE element-based electrocatalysts and their applications in CO2RR are thoroughly summarized in this review. The review starts by outlining the characteristics of CO2RR and RE elements, followed by a summary of design strategies and synthetic methods for RE element-based electrocatalysts. Finally, an overview of current limitations in research and an outline of the prospects for future investigations are proposed.

Facilitated Visible-Light-Driven Peroxymonosulfate Activation by a Co-Fe Layered Double Hydroxide Derived p-n Heterostructure for Sulfadiazine Degradation: Affecting Parameters, Kinetics, and Mechanistic Insights

The utilization of multivalence ionic metal species generated through a peroxymonosulfate (PMS)-assisted photocatalytic system is a promising platform for the selective degradation of water contaminants. However, achieving an effective electron transport and enhanced separation efficiency for these metal species is a daunting challenge. Thus, our current study addresses this challenge by using a Co-Fe-based layered-double-hydroxide template to synthesize a Co3O4/FeCo2O4 p-n heterojunction composite via a simple monosynthetic route. The resultant composite is thoroughly validated through advanced characterization techniques that efficiently activate PMS for sulfadiazine (SDZ) degradation under visible light, achieving a remarkable degradation efficiency of up to 90%. This accomplishment is attributed to factors including intimate interfacial contact, excellent light harvesting, mesoporosity, and oxygen vacancies within the composite. The formation of a distinct p-n heterojunction following the S-scheme charge dynamic significantly enhances photogenerated carrier separation and reduces charge recombination. The research delves into comprehensive investigations including degradation studies, active species trapping experiments, parameter exploration, and in-depth liquid chromatography-mass spectrometry for analysis of the degradation byproducts and pathway. Induced oxygen vacancies, strategically placed active surface sites, and mesoporosity in the Co3O4/FeCo2O4 composite synergistically boosted the sluggish PMS activation, leading to enhanced SDZ degradation. This study introduces a new perspective by demonstrating the potential of a single-material, mixed-metal oxide-based p-n heterojunction photocatalytic system following the S-scheme charge-transfer route for SDZ degradation. The findings contribute toward emphasizing the importance of tailored composite materials in tackling persistent contaminants.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Europium-doped cerium oxide nanoparticles: investigating oxygen vacancies and their role in enhanced photocatalytic and magnetic properties

In this study, pure and europium-doped (2%, 4%, 6%, and 8%) cerium oxide (CeO2) nanoparticles (NPs) were employed for efficient dye removal through photocatalytic approach. XRD and TEM confirmed the formation of pure CeO2 nanoparticles, while XPS and Raman spectroscopy were used to analyze the electronic properties and lattice defects, such as oxygen vacancies. The presence of lattice defects, which increased with the concentration of Eu, was found to be responsible for the enhanced degradation of Rose Bengal dye (82.4% for 8% Eu-doped sample) in 75 min. FTIR confirmed the chemical composition of the synthesized sample. The band at 617 cm-1, corresponding to the symmetrical stretching vibration mode of (Ce-O-Ce) or (Ce-O-Eu). The magnetic properties of synthesized samples were examined using VSM, revealing an increase from 4.48 to 11.0 emu/g in magnetization. This enhancement was attributed to F-center exchange mechanism (FCE), resulting from the presence of oxygen vacancies. These findings contribute to the development of advanced materials for sustainable wastewater treatment and spintronics.

Enhanced electrocatalytic efficiencies for water electrolysis and para-nitrophenol hydrogenation by self-supported nickel cobalt phosphide-nickel iron layered double hydroxide p-n junction

Charge redistribution across heterointerfaces is an important tactic to enhance the catalytic activities and bifunctionality of hybrid catalysts, especially for green hydrogen production from water electrolysis and harmless electrocatalytic valorization of organics. Herein, a self-supported p-n junction catalytic electrode was constructed by tandem electrodeposition of nickel cobalt phosphide (NiCoP) and nickel iron layered double hydroxide (NiFe LDH) onto Ni foam (NF) substrate, denoted as NiCoP@NiFe LDH/NF, to enhance the electrocatalytic capabilities for water electrolysis and hydrogenation of an organic, para-nitrophenol (4-NP). Benefitting from the charge redistribution across the p-n junction, high electrocatalytic efficiencies for oxygen evolution reaction (OER, overpotential of 388 mV at 100 mA cm-2) and hydrogen evolution reaction (HER, overpotential of 132 mV at 10 mA cm-2) could be achieved concurrently by the NiCoP@NiFe LDH/NF electrode, and both overpotentials were located within the mainstream levels in this domain. The bifunctional catalytic features enabled a full water electrolysis response of 10 mA cm-2 at 1.61 V. In addition, the p-n junction electrode catalyzed the hydrogenation of 4-NP at a conversion of 100%, para-aminophenol (4-AP) selectivity of 90% and faradaic efficiency (FE) of 88% at -0.18 V. The current work offers a feasible strategy for fulfilling electrochemical H2 production and hydrogenation valorization of 4-NP pollutant by constructing a self-supported p-n junction catalytic electrode.

Importing Antibonding-Orbital Occupancy through Pd-O-Gd Bridge Promotes Electrocatalytic Oxygen Reduction

The active-site density, intrinsic activity, and durability of Pd-based materials for oxygen reduction reaction (ORR) are critical to their application in industrial energy devices. This work constructs a series of carbon-based rare-earth (RE) oxides (Gd2 O3 , Sm2 O3 , Eu2 O3 , and CeO2 ) by using RE metal-organic frameworks to tune the ORR performance of the Pd sites through the Pd-REx Oy interface interaction. Taking Pd-Gd2 O3 /C as a representative, it is identified that the strong coupling between Pd and Gd2 O3 induces the formation of the Pd-O-Gd bridge, which triggers charge redistribution of Pd and Gd2 O3 . The screened Pd-Gd2 O3 /C exhibits impressive ORR performance with high onset potential (0.986 VRHE ), half-wave potential (0.877 VRHE ), and excellent stability. Similar ORR results are also found for Pd-Sm2 O3 /C, Pd-Eu2 O3 /C, and Pd-CeO2 /C catalysts. Theoretical analyses reveal that the coupling between Pd and Gd2 O3 promotes electron transfer through the Pd-O-Gd bridge, which induces the antibonding-orbital occupancy of Pd-*OH for the optimization of *OH adsorption in the rate-determining step of ORR. The pH-dependent microkinetic modeling shows that Pd-Gd2 O3 is close to the theoretical optimal activity for ORR, outperforming Pt under the same conditions. By its ascendancy in ORR, the Pd-Gd2 O3 /C exhibits superior performance in Zn-air battery as an air cathode, implying its excellent practicability.

Nonredox trivalent nickel catalyzing nucleophilic electrooxidation of organics

A thorough comprehension of the mechanism behind organic electrooxidation is crucial for the development of efficient energy conversion technology. Here, we find that trivalent nickel is capable of oxidizing organics through a nucleophilic attack and electron transfer via a nonredox process. This nonredox trivalent nickel exhibits exceptional kinetic efficiency in oxidizing organics that possess the highest occupied molecular orbital energy levels ranging from -7.4 to -6 eV (vs. Vacuum level) and the dual local softness values of nucleophilic atoms in nucleophilic functional groups, such as hydroxyls (methanol, ethanol, benzyl alcohol), carbonyls (formamide, urea, formaldehyde, glucose, and N-acetyl glucosamine), and aminos (benzylamine), ranging from -0.65 to -0.15. The rapid electrooxidation kinetics can be attributed to the isoenergetic channels created by the nucleophilic attack and the nonredox electron transfer via the unoccupied eg orbitals of trivalent nickel (t2g6eg1). Our findings are valuable in identifying kinetically fast organic electrooxidation on nonredox catalysts for efficient energy conversions.

Redox-active ligands enhance oxygen evolution reaction activity: Regulating the spin state of ferric ions and accelerating electron transfer

Metal-organic frameworks (MOFs) are considered as one of the most promising catalysts for oxygen evolution reaction (OER). However, only a few have introduced redox-active ligands into MOFs and explored their role in the OER process. In this work, we synthesized FeNi DHBQ/NF using the redox-active ligand 2,5-dihydroxy-1,4-benzoquinone (DHBQ), which exhibited excellent redox activity and required only 207 and 242 mV overpotentials to achieve current densities of 10 and 100 mA cm-2. Our research confirms that (i) the doping of Fe leads to the formation of Ni → O → Fe electron transfer channels in the MOFs and stronger electron transfer, attributed to the stronger d-π conjugation between the metal center and the ligand and reduced the d-orbital crystal field splitting energy of Fe3+; (ii) the rate determination step (RDS) in the OER process of the catalyst is the formation of O*, while Fe and redox-active ligands effectively regulate the adsorption energy of oxygen-containing intermediates, reducing the energy barrier of the RDS; (iii) the redox-active ligands can act as "electron reservoirs" in the electrochemical process, making Ni more readily oxidized to Ni3+ or even Ni4+ at low potentials, which is beneficial to the subsequent OER process.

Construction of Co/FeCo@Fe(Co)3O4 heterojunction rich in oxygen vacancies derived from metal-organic frameworks using O2 plasma as a high-performance bifunctional catalyst for rechargeable zinc-air batteries

Developing high-efficient, good-durability, and low-cost bifunctional non-precious metal catalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is urgent and significant for promoting the practical rechargeable zinc-air batteries (RZABs). Herein, N-doped carbon coated Co/FeCo@Fe(Co)3O4 heterojunction rich in oxygen vacancies derived from metal-organic frameworks (MOFs) is successfully constructed by O2 plasma treatment. The phase transition of Co/FeCo to FeCo oxide (Fe3O4/Co3O4) mainly occurs on the surface of nanoparticles (NPs) during the O2 plasma treatment, which can form rich oxygen vacancies simultaneously. The fabricated catalyst P-Co3Fe1/NC-700-10 with optimal O2 plasma treatment time of 10 min can reduce the potential gap between the OER and ORR to 760 mV, which is much lower than commercial 20% Pt/C + RuO2 (910 mV). Density functional theory (DFT) calculation indicates that the synergistic coupling between Co/FeCo alloy NPs and FeCo oxide layer can promote the ORR/OER performance. Both liquid electrolyte RZAB and flexible all-solid-state RZAB using P-Co3Fe1/NC-700-10 as the air-cathode catalyst display high power density, specific capacity and excellent stability. This work provides an effective idea for the development of high performance bifunctional electrocatalyst and the application of RZABs.

Rare-Earth-Modified Metal-Organic Frameworks and Derivatives for Photo/Electrocatalysis

Metal-organic frameworks (MOFs) and their derivatives have attracted much attention in the field of photo/electrocatalysis owing to their ultrahigh porosity, tunable properties, and superior coordination ability. Regulating the valence electronic structure and coordination environment of MOFs is an effective way to enhance their intrinsic catalytic performance. Rare earth (RE) elements with 4f orbital occupancy provide an opportunity to evoke electron rearrangement, accelerate charged carrier transport, and synergize the surface adsorption of catalysts. Therefore, the integration of RE with MOFs makes it possible to optimize their electronic structure and coordination environment, resulting in enhanced catalytic performance. In this review, progress in current research on the use of RE-modified MOFs and their derivatives for photo/electrocatalysis is summarized and discussed. First, the theoretical advantages of RE in MOF modification are introduced, with a focus on the roles of 4f orbital occupancy and RE ion organic coordination ligands. Then, the application of RE-modified MOFs and their derivatives in photo/electrocatalysis is systematically discussed. Finally, research challenges, future opportunities, and prospects for RE-MOFs are also discussed.

High-Valence Mo Doping and Oxygen Vacancy Engineering to Promote Morphological Evolution and Oxygen Evolution Reaction Activity

The rational design of high-efficiency, low-cost electrocatalysts for electrochemical water oxidation in alkaline media remains a huge challenge. Herein, combined strategies of metal doping and vacancy engineering are employed to develop unique Mo-doped cobalt oxide nanosheet arrays. The Mo dopants exist in the form of high-valence Mo6+, and the doping amount has a significant effect on the structure morphology, which transforms from 1D nanowires/nanobelts to 2D nanosheets and finally 3D nanoflowers. In addition, the introduction of vast oxygen vacancies helps to modulate the electronic states and increase the electronic conductivity. The optimal catalyst MoCoO-3 exhibits greatly increased active sites and enhanced reaction kinetics. It gives a dramatically lower overpotential at 50 mA cm-2 (288 mV), much smaller than that of the undoped counterpart (418 mV) and comparable to those of the recently reported electrocatalysts. Density functional theory results further verify that the increased electronic conductivity and optimized adsorption energy toward oxygen evolution reaction intermediates are mainly responsible for the enhanced catalytic activity. Moreover, the assembled two-electrode electrolyzer (MoCoO-3||Pt/C) exhibits superior performance with the cell potential decreased by 233 mV to reach a current density of 50 mA cm-2 with respect to the benchmark counterpart catalysts (RuO2||Pt/C). This work might contribute to the rational design of effective, low-cost electrocatalyst materials by combining multiple strategies.

(FeMnCe)-co-doped MOF-74 with significantly improved performance for overall water splitting

Developing inexpensive electrocatalysts with high activity and stability is of great value for overall water splitting. In this work, we designed a series of 3d-4f (FeMnCe)-trimetallic MOF-74 with different ratios of 3d- and 4f-metal centers. Among them, FeMn6Ce0.5-MOF-74/NF exhibited the best electrocatalytic performance for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline solution. It only requires a low overpotential of 281 mV@100 mA cm-2 for OER and 186 mV@-10 mA cm-2 for HER in 1 M KOH. With FeMn6Ce0.5-MOF-74/NF as the anode and cathode in the overall water splitting system, only 1.65 V is needed to deliver a current density of 10 mA cm-2. In particular, for the as-fabricated FeMn6Ce0.5-MOF-74/NF||Pt/C cell unit, only 1.40 V is needed to achieve 10 mA cm-2. Therefore, the successful design of 3d-4f mixed-metallic MOF-74 provides a new viewpoint to develop highly efficient non-precious metal electrocatalysts.