Hierarchical Co2 P/CoS2 @C@MoS2 Composites with Hollow Cavity and Multiple Phases Toward Wideband Electromagnetic Wave Absorption

Enhanced electromagnetic wave absorption of bacterial cellulose/ reduced graphene oxide aerogel by eco-friendly in-situ construction

Electromagnetic wave absorption materials (EWAMs) have become an effective means to address electromagnetic (EM) radiation and enhance stealth technology, among which aerogels are valued for their lightweight nature and excellent designability. This study utilized environmentally friendly preparation and in-situ reduction techniques to fabricate bacterial cellulose (BC) / reduced graphene oxide (RGO) aerogels, achieving tailored EM wave loss capabilities by controlling the reduction time of ascorbic acid. Benefitting from the effects of freeze-casting, BC winding, hydrogen bond, and RGO layers coupling, the aerogel maintains their original structure after reduction and exhibits satisfactory EM wave absorption. The minimum reflection loss (RLmin) is -38.52 dB, with an effective absorption bandwidth (EAB) of 6.68 GHz and a maximum radar cross section (RCS) reduction of 44.69 dBsm. Additionally, the aerogel's lightweight (a low density of 9.03 mg/cm3) and outstanding thermal insulation properties enable it to adapt to complex conditions. Thus, the study provides a novel approach for the construction of industrialized and sustainable RGO-based EWAMs.

Self-Templating Engineering of Hollow N-Doped Carbon Microspheres Anchored with Ternary FeCoNi Alloys for Low-Frequency Microwave Absorption

Rational design and precision fabrication of magnetic-dielectric composites have significant application potential for microwave absorption in the low-frequency range of 2-8 GHz. However, the composition and structure engineering of these composites in regulating their magnetic-dielectric balance to achieve high-performance low-frequency microwave absorption remains challenging. Herein, a self-templating engineering strategy is proposed to fabricate hollow N-doped carbon microspheres anchored with ternary FeCoNi alloys. The high-temperature pyrolysis of FeCoNi alloy precursors creates core-shell FeCoNi alloy-graphitic carbon nano-units that are confined in carbon shells. Moreover, the anchored FeCoNi alloys play a critical role in maintaining hollow structural stability. In conjunction with the additional contribution of multiple heterogeneous interfaces, graphitization, and N doping to the regulation of electromagnetic parameters, hollow FeCoNi@NCMs exhibit a minimum reflection loss (RLmin) of -53.5 dB and an effective absorption bandwidth (EAB) of 2.48 GHz in the low-frequency range of 2-8 GHz. Furthermore, a filler loading of 20 wt% can also be used to achieve a broader EAB of 5.34 GHz with a matching thickness of 1.7 mm. In brief, this work opens up new avenues for the self-templating engineering of magnetic-dielectric composites for low-frequency microwave absorption.

Excellent Low-Frequency Microwave Absorption and High Thermal Conductivity in Polydimethylsiloxane Composites Endowed by Hydrangea-Like CoNi@BN Heterostructure Fillers

The advancement of thin, lightweight, and high-power electronic devices has increasingly exacerbated issues related to electromagnetic interference and heat accumulation. To address these challenges, a spray-drying-sintering process is employed to assemble chain-like CoNi and flake boron nitride (BN) into hydrangea-like CoNi@BN heterostructure fillers. These fillers are then composited with polydimethylsiloxane (PDMS) to develop CoNi@BN/PDMS composites, which integrate low-frequency microwave absorption and thermal conductivity. When the volume fraction of CoNi@BN is 44 vol% and the mass ratio of CoNi to BN is 3:1, the CoNi@BN/PDMS composites exhibit optimal performance in both low-frequency microwave absorption and thermal conductivity. These composites achieve a minimum reflection loss of -49.9 dB and a low-frequency effective absorption bandwidth of 2.40 GHz (3.92-6.32 GHz) at a thickness of 4.4 mm, fully covering the n79 band (4.4-5.0 GHz) for 5G communications. Meanwhile, the in-plane thermal conductivity (λ∥) of the CoNi@BN/PDMS composites is 7.31 W m-1 K-1, which is ≈11.4 times of the λ∥ (0.64 W m-1 K-1) for pure PDMS, and 32% higher than that of the (CoNi/BN)/PDMS composites (5.52 W m-1 K-1) with the same volume fraction of CoNi and BN obtained through direct mixing.

Multidimensional Engineering Induced Interfacial Polarization by in-Situ Confined Growth of MoS2 Nanosheets for Enhanced Microwave Absorption

Interface design has enormous potential for the enhancement of interfacial polarization and microwave absorption properties. However, the construction of interfaces is always limited in components of a single dimension. Developing systematic strategies to customize multidimensional interfaces and fully utilize advantages of low-dimensional materials remains challenging. Two-dimensional transition metal dichalcogenides (TMDCs) have garnered significant attention owing to their distinctive electrical conductivity and exceptional interfacial effects. In this study, a series of hollow TMDCs@C fibers are synthesized via sacrificial template of CdS and confined growth of TMDCs embedded in the fibers. The complex permittivity of the hollow TMDCs@C fibers can be adjusted by tuning the content of CdS templates. Importantly, the multidimensional interfaces of the fibers contribute to elevating the microwave absorption performance. Among the hollow TMDCs@C fibers, the minimum reflection loss (RLmin) of the hollow MoS2@C fibers can reach -52.0 dB at the thickness of 2.5 mm, with a broad effective absorption bandwidth of 4.56 GHz at 2.0 mm. This work establishes an alternative approach for constructing multidimensional coupling interfaces and optimizing TMDCs as microwave absorption materials.

Optimizing Integrated-Loss Capacities via Asymmetric Electronic Environments for Highly Efficient Electromagnetic Wave Absorption

Asymmetric electronic environments based on microscopic-scale perspective have injected infinite vitality in understanding the intrinsic mechanism of polarization loss for electromagnetic (EM) wave absorption, but still exists a significant challenge. Herein, Zn single-atoms (SAs), structural defects, and Co nanoclusters are simultaneously implanted into bimetallic metal-organic framework derivatives via the two-step dual coordination-pyrolysis process. Theoretical simulations and experimental results reveal that the electronic coupling interactions between Zn SAs and structural defects delocalize the symmetric electronic environments and generate additional dipole polarization without sacrificing conduction loss owing to the compensation of carbon nanotubes. Moreover, Co nanoclusters with large nanocurvatures induce a strong interfacial electric field, activate the superiority of heterointerfaces and promote interfacial polarization. Benefiting from the aforementioned merits, the resultant derivatives deliver an optimal reflection loss of -58.9 dB and the effective absorption bandwidth is 5.2 GHz. These findings provide an innovative insight into clarifying the microscopic loss mechanism from the asymmetric electron environments viewpoint and inspire the generalized electronic modulation engineering in optimizing EM wave absorption.

Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

Currently, the demand for electromagnetic wave (EMW) absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent. Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption. However, interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption. In this study, multi-component tin compound fiber composites based on carbon fiber (CF) substrate were prepared by electrospinning, hydrothermal synthesis, and high-temperature thermal reduction. By utilizing the different properties of different substances, rich heterogeneous interfaces are constructed. This effectively promotes charge transfer and enhances interfacial polarization and conduction loss. The prepared SnS/SnS2/SnO2/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt% in epoxy resin. The minimum reflection loss (RL) is - 46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz. Moreover, SnS/SnS2/SnO2/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces. Therefore, this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

Low-Temperature Oxidation Induced Phase Evolution with Gradient Magnetic Heterointerfaces for Superior Electromagnetic Wave Absorption

Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching, adjusting dielectric/magnetic resonance and promoting electromagnetic (EM) wave absorption, but still exist a significant challenging in regulating local phase evolution. Herein, accordion-shaped Co/Co3O4@N-doped carbon nanosheets (Co/Co3O4@NC) with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and low-temperature oxidation process. The results indicate that the surface epitaxial growth of crystal Co3O4 domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components, which are beneficial for optimizing impedance matching and interfacial polarization. Moreover, gradient magnetic heterointerfaces simultaneously realize magnetic coupling, and long-range magnetic diffraction. Specifically, the synthesized Co/Co3O4@NC absorbents display the strong electromagnetic wave attenuation capability of - 53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz, both are superior to those of single magnetic domains embedded in carbon matrix. This design concept provides us an inspiration in optimizing interfacial polarization, regulating magnetic coupling and promoting electromagnetic wave absorption.

Advantageous Effects of Phase Transition-Modulated Electric Polarization of Hollow CuSx for Enhanced Electromagnetic Wave Absorption

Scrutinizing the electromagnetic wave absorption mechanism of sulfides remains a challenge due to the variability of the modulation of the crystal structure of the sulfides. To take advantage of this variability, nanosheet-assembled Cu9S5/CN composites with sulfur vacancies were prepared in this study by self-assembly synthesis and subsequent high-temperature heat treatment. Systematic studies show the phase transition-dependent induced decrease in the conductivity, the defect site-induced difference in the charge density, the weakened vacancy formation of defect polarization loss, and the influence of valence state on electric dipole polarization loss and interfacial polarization loss, making the optimization of the dielectric constant a significant positive effect on the improvement of impedance matching. This work provides a reliable example and theoretical guidance for the crystal structure design for the preparation of a new generation of efficient sulfide-based wave-absorbing materials.

Hierarchical etching-assembly engineering of Fe-based composite microspheres with balanced magnetic-dielectric synergy towards ultrahigh electromagnetic wave absorption

Hierarchical engineering of magnetic-dielectric composite microspheres has attracted increasing attention owing to its potential to enhance electromagnetic wave absorption (EMA) through magnetic-dielectric synergy. However, optimizing magnetic-dielectric balance in composite microspheres at the nanoscale remains a formidable task due to their limited component optimization and microstructural regulation. Herein, a novel approach is proposed to modify conventional carbonyl iron powder (CIP) microspheres via synergistic etching-assembly strategy. By applying a polydopamine coating, successive tannic acid (TA) etching-assembly, and pyrolysis, hierarchical iron@carbon-1/N-doped carbon (Fe@C-1/NC) composite microspheres are obtained. This overcomes the drawbacks of CIP microspheres, including their high density and poor impedance matching, which hinder EMA performance. Hierarchical carbon layer engineering can introduce abundant dipole centers, heterogeneous interfaces, and conductive networks to induce dielectric loss, while magnetic components contribute to magnetic resonance and eddy current loss, as demonstrated by the results. Accordingly, Fe@C-1/NC composite microspheres demonstrate a minimum reflection loss (RLmin) of -70.7 dB and an effective absorption bandwidth of 3.75 GHz at a matching thickness of 2.3 mm. Generally, this work paves the way towards CIP engineering to provide guidance to the future exploration of hierarchical magnetic-dielectric EMA materials.

Metamaterial Absorbers with Archimedean Tiling Structures: Toward Response and Absorption of Multiband Electromagnetic Waves

With the continuous development of electromagnetic wave-absorbing materials, the design of artificial structures for electromagnetic absorbers based on the concept of metamaterials is becoming more abundant. However, in the design process, it is difficult to further broaden the effective absorption band due to the limitation that the traditional single-size structure responds to electromagnetic waves only in specific frequency bands. Therefore, in this paper, based on the moth-eye bionic hexagonal structure absorber with antireflection performance, an Archimedean tiling structure is designed to optimize it, and through the introduction of a variety of primitives with large differences in dimensions, a multifrequency band-response mechanism is achieved to enhance the multireflection mechanism, which can effectively broaden the absorption band and improve the wave absorption performance. Ultimately, the moth-eye bionic structure absorber optimized by (3.4.6.4) can achieve an effective absorption of 10.26 GHz at a thickness of 2 mm. This work presents a new idea for the design work of electromagnetic wave-absorbing metamaterials, which has a broad application prospect in the aerospace, electronic information countermeasures, communication, and detection industries.

Yolk-shell construction of Co0.7Fe0.3 modified with dual carbon for broadband microwave absorption

The rational and effective combination of multicomponent materials and the design of subtle microstructure for efficient microwave absorption are still challenging. In this study, carbon-coated CoFe with heterogeneous interfaces was space-restricted in the void space of hollow mesoporous carbon spheres through a facile approach involving electrostatic adsorption and annealing, and a high-performance microwave absorber (MAs) (denoted as Co0.7Fe0.3@C@void@C) was successfully prepared. The heterostructure, three-dimensional lightweight porous morphology, and electromagnetic synergy strategy enabled the Co0.7Fe0.3@C@void@C material with yolk-shell structure to exhibit surprising microwave absorption properties. When the annealing temperature and filler loading were 550° C and 15 wt%, respectively, the composites exhibited an effective absorption bandwidth (EAB) of 7.16 GHz at 2.48 mm and a minimum reflection loss of -24.1 dB at 2.11 mm. A maximum EAB of 7.21 GHz at 2.37 mm could be achieved for the composite prepared with an annealing temperature of 650° C. In addition, radar cross-section experiments demonstrated, the potential practical applicability of Co0.7Fe0.3@C@void@C. This work expands a new avenue to develop high-performance and lightweight MAs with ingenious microstructure.