Two Birds with One Stone: Using Indium Oxide Surficial Modification to Tune Inner Helmholtz Plane and Regulate Nucleation for Dendrite-free Lithium Anode

Bottom-up Growth of Convex Sphere with Adjustable Cu(0)/Cu(I) Interfaces for Effective C2 Production from CO2 Electroreduction

One challenge confronting the Cu2O catalysts in the electrocatalysis of carbon dioxide reduction reaction (CO2RR) is the reduction of active Cu(I) species, resulting in low selectivity and quick deactivation. In this study, we for the first time introduce a bottom-up growth of convex sphere with adjustable Cu(0)/Cu(I) interfaces (Cux@Cu2O convex spheres). Interestingly, the interfaces are dynamically modulated by varying hydrothermal time, thus regulating the conversion of C1 and C2 products. In particular, the 4 h hydrothermal treatment applied to Cu0.25@Cu2O convex sphere with the favorable Cu(0)/Cu(I) interface results in the highest selectivity for C2 products (90.5 %). In situ Fourier-transform infrared spectroscopy measurements and density functional theory calculations reveal that the Cu(0)/Cu(I) interface lowers the energy barrier for the production of ethylene and ethanol while increasing the coverage of localized *CO adsorbate for increased dimerization. This work establishes a novel approach for transforming the state of valence-sensitive electrocatalysts into high-value energy-related engineering products.

A computational study of the negative LiIn modified anode and its interaction with β-Li3PS4 solid-electrolyte for battery applications

All-solid-state lithium batteries (ASSLBs) have sparked interest due to their far superior energy density compared to current commercial material, but the heightened reactivity of the negative Li electrode can compromise the long-term cyclability of the cell, calling for the introduction of passivating layers or alloy anodes. In this article, we aim to explain the outstanding stability of LiIn alloy-based anodes over extended cycling by comparing its bulk and interface properties to Li-metal. Using density functional theory, we conducted an in-depth analysis of the LiIn surfaces' formation and subsequent structural stability in interfaces with the solid electrolyte β-Li3PS4. Several LiIn facets are shown to possess sufficient structural stability, with the (110) surface being the most stable. The stable interfaces established with the β-Li3PS4(100) surface featured favorable adhesion energy, low strain energy, and little reconstruction. By comparing these interface properties with the bulk properties of Li-metal and LiIn, we highlighted the influence of the cohesion energy, Fermi energy level, and band position of the two materials in the long-term stability of their anodes under battery conditions.

Galvanic Replacement Synthesis of VOx@EGaIn-PEG Core-Shell Nanohybrids for Peroxidase Mimics

The development of high-performance biosensors is a key focus in the nanozyme field, but the current limitations in biocompatibility and recyclability hinder their broader applications. Herein, we address these challenges by constructing core-shell nanohybrids with biocompatible poly(ethylene glycol) (PEG) modification using a galvanic replacement reaction between orthovanadate ions and liquid metal (LM) (VOx@EGaIn-PEG). By leveraging the excellent charge transfer properties and the low band gap of the LM surface oxide, the VOx@EGaIn-PEG heterojunction can effectively convert hydrogen peroxide into hydroxyl radicals, demonstrating excellent peroxidase-like activity and stability (Km = 490 μM, vmax = 1.206 μM/s). The unique self-healing characteristics of LM further enable the recovery and regeneration of VOx@EGaIn-PEG nanozymes, thereby significantly reducing the cost of biological detection. Building upon this, we developed a nanozyme colorimetric sensor suitable for biological systems and integrated it with a smartphone to create an efficient quantitative detection platform. This platform allows for the convenient and sensitive detection of glucose in serum samples, exhibiting a good linear relationship in the range of 10-500 μM and a detection limit of 2.35 μM. The remarkable catalytic potential of LM, combined with its biocompatibility and regenerative properties, offers valuable insights for applications in catalysis and biomedical fields.

Lithiophilic Magnetic Host Facilitates Target-Deposited Lithium for Practical Lithium-Metal Batteries

Lithium-metal shows promising prospects in constructing various high-energy-density lithium-metal batteries (LMBs) while long-lasting tricky issues including the uncontrolled dendritic lithium growth and infinite lithium volume expansion seriously impede the application of LMBs. In this work, it is originally found that a unique lithiophilic magnetic host matrix (Co₃ O₄ -CCNFs) can simultaneously eliminate the uncontrolled dendritic lithium growth and huge lithium volume expansion that commonly occur in typical LMBs. The magnetic Co₃ O₄ nanocrystals which inherently embed on the host matrix act as nucleation sites and can also induce micromagnetic field and facilitate a targeted and ordered lithium deposition behavior thus, eliminating the formation of dendritic Li. Meanwhile, the conductive host can effectively homogenize the current distribution and Li-ion flux, thus, further relieving the volume expansion during cycling. Benefiting from this, the featured electrodes demonstrate ultra-high coulombic efficiency of 99.1% under 1 mA cm^-2 and 1 mAh cm^-2 . Symmetric cell under limited Li (10 mAh cm^-2 ) inspiringly delivers ultralong cycle life of 1600 h (under 2 mA cm^-2 , 1 mAh cm^-2 ). Moreover, LiFePO₄ ||Co₃ O₄ -CCNFs@Li full-cell under practical condition of limited negative/positive capacity ratio (2.3:1) can deliver remarkably improved cycling stability (with 86.6% capacity retention over 440 cycles).

Advanced Composite Lithium Metal Anodes with 3D Frameworks: Preloading Strategies, Interfacial Optimization, and Perspectives

Lithium (Li) metal is regarded as the most promising anode candidate for next-generation rechargeable storage systems due to its impeccable capacity and the lowest electrochemical potential. Nevertheless, the irregular dendritic Li, unstable interface, and infinite volume change, which are the intrinsic drawbacks rooted in Li metal, give a seriously negative effect on the practical commercialization for Li metal batteries. Among the numerous optimization strategies, designing a 3D framework with high specific surface area and sufficient space is a convincing way out to ameliorate the above issues. Due to the Li-free property of the 3D framework, a Li preloading process is necessary before the 3D framework that matches with the electrolyte and cathode. How to achieve homogeneous integration with Li and 3D framework is essential to determine the electrochemical performance of Li metal anode. Herein, this review overviews the recent general fabrication methods of 3D framework-based composite Li metal anode, including electrodeposition, molten Li infusion, and pressure-derived fabrication, with the focus on the underlying mechanism, design criteria, and interfacial optimization. These results can give specific perspectives for future Li metal batteries with thin thickness, low N/P ratio, lean electrolyte, and high energy density (>350 Wh Kg^-1 ).

One-Step Phase Separation for Core-Shell Carbon@Indium Oxide@Bismuth Microspheres with Enhanced Activity for CO2 Electroreduction to Formate

It is a substantial challenge to construct electrocatalysts with high activity, good selectivity, and long-term stability for electrocatalytic reduction of carbon dioxide to formic acid. Herein, bismuth and indium species are innovatively integrated into a uniform heterogeneous spherical structure by a neoteric quasi-microemulsion method, and a novel C@In₂ O₃ @Bi₅₀ core-shell structure is constructed through a subsequent one-step phase separation strategy due to melting point difference and Kirkendall effect with the nano-limiting effect of the carbon structure. This core-shell C@In₂ O₃ @Bi₅₀ catalyst can selectively reduce CO₂ to formate with high selectivity (≈90% faradaic efficiency), large partial current density (24.53 mA cm^-2 at -1.36 V), and long-term stability (up to 14.5 h), superior to most of the Bi-based catalysts. The hybrid Bi/In₂ O₃ interfaces of core-shell C@In₂ O₃ @Bi will stabilize the key intermediate HCOO* and suppress CO poisoning, benefiting the CO₂ RR selectivity and stability, while the internal cavity of core-shell structure will improve the reaction kinetics because of the large specific surface area and the enhancement of ion shuttle and electron transfer. Furthermore, the nano-limited domain effect of outmost carbon prevent active components from oxidation and agglomeration, helpful for stabilizing the catalyst. This work offers valuable insights into core-shell structure engineering to promote practical CO₂ conversion technology.

High Utilization of Composite Magnesium Metal Anodes Enabled by a Magnesiophilic Coating

Metallic magnesium is a promising high-capacity anode material for energy storage technologies beyond lithium-ion batteries. However, most reported Mg metal anodes are only cyclable under shallow cycling (≤1 mAh cm^-2) and thus poor Mg utilization (<3%) conditions, significantly compromising their energy-dense characteristic. Herein, composite Mg metal anodes with high capacity utilization of 75% are achieved by coating magnesiophilic gold nanoparticles on copper foils for the first time. Benefiting from homogeneous ionic flux and uniform deposition morphology, the Mg-plated Au-Cu electrode exhibits high average Coulombic efficiency of 99.16% over 170 h cycling at 75% Mg utilization. Moreover, the full cell based on Mg-plated Au-Cu anode and Mo₆S₈ cathode achieves superior capacity retention of 80% after 300 cycles at a low negative/positive ratio of 1.33. This work provides a simple yet effective general strategy to enhance Mg utilization and reversibility, which can be extended to other metal anodes as well.