Physicochemical Properties of Oxidized Cassava Starch Prepared under Various Alkalinity Levels

Oxidation-induced starch molecular degradation: A comprehensive kinetic investigation using NaClO/NaBr/TEMPO system

Starch degradation often coincides with its chemical modification, and understanding how chemical modification influences starch degradation is vital for determining the properties of the resultant modified products. This work investigates the effect of oxidation on starch molecular degradation, examining factors such as oxidation degree, reaction kinetics, and degradation patterns during 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated starch oxidation under varying conditions, including reaction time, pH, temperature, and concentrations of NaBr, TEMPO, and NaClO. Results emphasize that extended reaction durations primarily lead to β-elimination, causing α-1,4 linkage cleavages. pH 8.5 favored non-selective oxidation, while pH 11 enhanced β-elimination, both slowing the reaction rate and severely damaging starch chains (Mw of 8.8 × 105 g/mol and 7.2 × 105 g/mol, respectively). Elevated temperature from 0 to 30 °C significantly expedited both selective and non-selective oxidation, dramatically reducing molecular mass to 8.1 × 105 g/mol. Increasing concentrations of NaBr and TEMPO boost the reaction rate with minimal impact on molecular mass. Meanwhile, increasing NaClO concentration from 0.2 to 2.2 mmol/g-starch not only affects the reaction rate but also reinforces β-elimination, enhancing molecular degradation. This study is insightful for starch modification to achieve desired oxidation levels and chain lengths by controlling reaction conditions, offering potential advancements in oxidized starch-based materials like nano micelles.

Characterization of structure-function properties relevant to copper-activated pyrite depression by different starches

Starches can adsorb on and depress copper-activated pyrite desirably during flotation, an important process in ore mineral extraction. In order to develop structure/function relationships, adsorption on and depression properties of copper-activated pyrite at pH 9 by normal wheat starch (NWS) and high-amylose wheat starch (HAW), dextrin, and a range of oxidized normal wheat starches (peroxide and hypochlorite treated) were investigated. Adsorption isotherms and bench flotation performance were compared with kinematic viscosity, molar mass distribution, surface coverage, and substituted functional groups assay. The differences in molar mass distribution and substituted functional groups among oxidized starches had little influence on the depression of copper-activated pyrite. However, the introduction of -C=O and -COOH substituents, combined with depolymerization, improved solubility and dispersibility, reduced aggregated structures, and strengthened surface binding of oxidized polymers, compared with NWS and HAW. At high concentrations, HAW, NWS, and dextrin were adsorbed onto the pyrite surface more than oxidized starches. However, at the low concentrations of depressant used in flotation, oxidized starches were more effective at selectively masking copper sites. This study suggests that a stable chelation between Cu(I) and starch ligands is necessary for depression of copper-activated pyrite at pH 9, which can be achieved with oxidized wheat starch.

Evaluating how avocado residue addition affects the properties of cassava starch-based foam trays

Avocado seed (AS) is an interesting residue for biopackaging because it has high starch content (41 %). We have prepared composite foam trays based on cassava starch containing different AS concentrations (0, 5, 10 and 15 % w/w) by thermopressing. Composite foam trays with AS were colorful because this residue contains phenolic compounds. The composite foam trays 10AS and 15AS were thicker (2.1-2.3 mm) and denser (0.8-0.9 g/cm³), but less porous (25.6-35.2 %) than cassava starch foam (Control). High AS concentrations yielded composite foam tray less puncture resistant (~40.4 N) and less flexible (0.7-0.9 %), but with tensile strength values (2.1 MPa) almost similar to the Control. The composite foam trays were less hydrophilic and more water resistant than control due to the presence of protein, lipid, and fibers and starch with more amylose content in AS. High AS concentration in composite foam tray decreases the temperature of thermal decomposition peak corresponding to starch. At temperatures >320 °C the foam trays with AS were more resistant to the thermal degradation due to the presence of fibers in AS. High AS concentrations delayed the degradation time of the composite foam trays by 15 days.

A Mini Review of Physicochemical Properties of Starch and Flour by Using Hydrothermal Treatment

Starch and flour from various plants have been widely used for sundry applications, especially in the food and chemical industries. However, native starch and flour have several weaknesses, especially in functional, pasting, and physicochemical properties. The quality of native starch and flour can be improved by a modification process. The type of modification that is safe, easy, and efficient is physical modification using hydrothermal treatment techniques, including heat moisture treatment (HMT) and annealing (ANN). This review discusses the hydrothermal modifications of starch and flour, especially from various tubers and cereals. The discussion is mainly on its effect on five parameters, namely functional properties, morphology, pasting properties, crystallinity, and thermal properties. Modification of HMT and ANN, in general, can improve the functional properties, causing cracking of the granule surface, stable viscosity to heat, increasing crystallinity, and increasing gelatinization temperature. However, some modifications of starch and flour by HMT and ANN had no effect on several parameters or even had the opposite effect. The summary of the various studies reviewed can be a reference for the development of hydrothermal-modified starch and flour applications for various industries.

Freeze Moisture Treatment and Ozonation of Adlay Starch (Coix lacryma-jobi): Effect on Functional, Pasting, and Physicochemical Properties

Adlay starch has great potential as a cereal starch, but it has several weaknesses, namely a low swelling volume, low solubility, and low stability. The purpose of this study was to improve the characteristics of adlay starch, such as porosity, functional properties, and pasting properties, through starch modification using freeze moisture treatment (FMT) and ozonation. This study consisted of several treatments, namely FMT, ozonation, and a combination of FMT + ozonation. The results show that the FMT and ozonation generally increased water absorption capacity, swelling volume, solubility, and number of pores of the starch granule. The pasting properties showed an increase in the viscosity of the hot paste and caused a decrease in the gelatinization temperature, breakdown, and setback viscosity. FMT 70% + ozonation produced modified adlay starch with a porous granular surface, swelling volume value of 21.10 mL/g, water absorption capacity of 1.54 g/g, a solubility of 9.20%, and an increase in the amorphous structure but did not cause the emergence of new functional groups. The combination of FMT + ozonation was effective in improving the functional, pasting, and physicochemical properties of adlay starch.

Physicochemical, Morphological, and Functional Properties of Starches Isolated from Avocado Seeds, a Potential Source for Resistant Starch

This study compared the physicochemical and functional properties of starches from eight cultivars of avocado seeds. Amylose content, morphology, crystalline structure, swelling power, solubility, thermal and pasting properties, and in vitro digestibility were investigated. The results revealed that the apparent amylose content of starches from avocado seeds varied with different varieties. Light microscopic and scanning electron microscopic examination demonstrated that the eight starches differed slightly in terms of morphology and granule size. The X-ray diffraction and Fourier transform infrared spectroscopy analyses showed that the crystal structure and chemical linkage of the avocado seed starches were similar. However, the pasting, water solubility, and thermal properties of the eight avocado seed starches differed. Importantly, all the starches had high resistant starch content (>60%), with the highest found in Hass seeds (77.83%). To conclude, starch from avocado seeds has a high potential for use in the production of resistant starch.

Iron Tetrasulfonatophthalocyanine-Catalyzed Starch Oxidation Using H2O2: Interplay between Catalyst Activity, Selectivity, and Stability

Oxidized starch can be efficiently prepared using H₂O₂ as an oxidant and iron(III) tetrasulfophthalocyanine (FePcS) as a catalyst, with properties in the same range as those for commercial oxidized starches prepared using NaOCl. Herein, we performed an in-depth study on the oxidation of potato starch focusing on the mode of operation of this green catalytic system and its fate as the reaction progresses. At optimum batch reaction conditions (H₂O₂/FePcS molar ratio of 6000, 50 °C, and pH 10), a high product yield (91 wt %) was obtained with substantial degrees of substitution (DS_COOH of 1.4 and DS_CO of 4.1 per 100 AGU) and significantly reduced viscosity (197 mPa·s) by dosing H₂O₂. Model compound studies showed limited activity of the catalyst for C6 oxidation, indicating that carboxylic acid incorporation likely results from C-C bond cleavage events. The influence of the process conditions on the stability of the FePcS catalyst was studied using UV-vis and Raman spectroscopic techniques, revealing that both increased H₂O₂ concentration and temperature promote the irreversible degradation of the FePcS catalyst at high pH. The rate and extent of FePcS degradation were found to strongly depend on the initial H₂O₂ concentration where also the rapid decomposition of H₂O₂ by FePcS occurs. These results explain why the slow addition of H₂O₂ in combination with low FePcS catalyst concentration is beneficial for the efficient application in starch oxidation.

Carioca bean starch upon synergic modification: characteristics and films properties

BACKGROUND

The use of damaged beans for starch isolation comprises an end-use alternative for a product that is not accepted by the consumer. For that reason, isolation and modification of Carioca bean starch should be explored and evaluated as a suitable source for biodegradable material. The present study aimed to evaluate the synergism of physical and chemical modifications on Carioca bean starch with respect to improving the properties of biodegradable films. A heat-moisture treatment (HMT) followed by oxidation by sodium hypochlorite was performed and vice versa.

RESULTS

Synergism was noted in the starch properties compared to the single modification. When the oxidation was applied first, a higher amylose and carbonyl content was noted. HMT, isolated and as a second modification, caused a more pronounced effect on viscosity profile than the oxidized starch, with an increase in paste temperature and a decrease in viscosity, breakdown and final viscosity.

CONCLUSION

The results obtained in the present study reflect a decrease in water vapor permeability, although a higher tensile strength was noted when oxidation was applied, as a single and as a first modification. © 2020 Society of Chemical Industry.

Gluten-free baked foods with extended shelf-life

The objective of this study was to develop a formulation that can retard staling/retrogradation of cheese breads without compromising their texture and expansion properties. During baking the dough expands and becomes soft, with lower density. Binary mixtures of cassava starch (Native + Oxidized) and with guar gum (Oxidized + Guar Gum) as well as a ternary mixture (Native + Oxidized + Guar Gum) were prepared. The mixtures were analyzed for freeze-thaw stability, expansion, pasting, thermal structural and retrogradation properties. The results were compared with those of sour cassava starch (polvilho azedo-PA), native cassava starch (N) and oxidized cassava starch (O). Moreover, cheese breads were prepared with these mixtures and evaluated during storage. The ternary mixture N + O + GG showed superior freeze-thaw stability (syneresis of 4.9, 7.8 and 11.0% in 1st, 2nd and 3rd cycles, respectively); the low retrogradation of this sample was confirmed both by DSC and FTIR analyses. The sample N + O + GG had a high expansion (> 10 mL/g) and the cheese breads developed with this mixture had a slower staling. Our results confirmed that the mixture N + O + GG can improve formulations of gluten-free baked foods.

The industrial applications of cassava: current status, opportunities and prospects

Cassava (Manihot esculenta Crantz) is a drought-tolerant, staple food crop that is grown in tropical and subtropical areas. As an important raw material, cassava is a valuable food source in developing countries and is also extensively employed for producing starch, bioethanol and other bio-based products (e.g. feed, medicine, cosmetics and biopolymers). These cassava-based industries also generate large quantities of wastes/residues rich in organic matter and suspended solids, providing great potential for conversion into value-added products through biorefinery. However, the community of cassava researchers is relatively small and there is very limited information on cassava. Therefore this review summarizes current knowledge on the system biology, economic value, nutritional quality and industrial applications of cassava and its wastes in an attempt to accelerate understanding of the basic biology of cassava. The review also discusses future perspectives with respect to integrating and utilizing cassava information resources for increasing the economic and environmental sustainability of cassava industries. © 2017 Society of Chemical Industry.

Morphological, mechanical, barrier and properties of films based on acetylated starch and cellulose from barley

BACKGROUND

Biodegradable films of native or acetylated starches with different concentrations of cellulose fibers (0%, 10% and 20%) were prepared. The films were characterized by morphological, mechanical, barrier, and thermal properties.

RESULT

The tensile strength of the acetylated starch film was lower than those of the native starch film, without fibers. The addition of fibers increased the tensile strength and decreased the elongation and the moisture of native and acetylated starches films. The acetylated starch film showed higher water solubility when compared to native starch film. The addition of cellulose fibers reduced the water solubility of the acetylated starch film. The films reinforced with cellulose fiber exhibited a higher initial decomposition temperature and thermal stability.

CONCLUSION

The mechanical, barrier, solubility, and thermal properties are factors which direct the type of the film application in packaging for food products. The films elaborated with acetylated starches of low degree of substitution were not effective in a reduction of the water vapor permeability. The addition of the cellulose fiber in acetylated and native starches films can contribute to the development of more resistant films to be applied in food systems that need to maintain their integrity. © 2016 Society of Chemical Industry.

Impact of acid and oxidative modifications, single or dual, of sorghum starch on biodegradable films

The objective of this study was to evaluate the effects of acid and oxidation modifications on sorghum starch, as well as the effect of dual modification of starch on the physical, morphological, mechanical, and barrier properties of biodegradable films. The acid modification was performed with 3% lactic acid and the oxidation was performed with 1.5% active chlorine. For dual modification, the acid modification was performed first, followed by oxidation under the same conditions as above. Both films of the oxidized starches, single and dual, had increased stiffness, providing a higher tensile strength and lower elongation when compared to films based on native and single acid modified starches. However, the dual modification increased the water vapor permeability of the films without changing their solubility. The increase in sorghum starch concentration in the filmogenic solution increased the thickness, water vapor permeability, and elongation of the films.

Physicochemical properties and responses in microcirculation of native tapioca starch-based plasma expander

Plasma expanders (PEs) such as hydroxyethyl strach are widely used for volume replacement. The plantation and production of tapioca in Thailand is abundant which may provide a new source for PEs starch with novel properties. This work investigated the properties and circulatory effects of native tapioca starch-based PE (TPE). Various formulations of mixture between native tapioca starch and 0.9% sodium chloride solution were prepared and characterized in order to obtain the proper physicochemical and rheological properties. About 1% concentration by weight per volume of TPE was compared with 6% hydroxyethyl starch 130/0.4 in 0.9% sodium chloride (HES130/0.4) using an acute hemodilution by 40% of blood volume in an animal protocol. TPE had higher turbidity and viscosity but lower colloid osmotic pressure compared with HES 130/0.4. The in vivo study demonstrated that Golden Syrian hamsters hemodiluted with TPE maintained a mean arterial blood pressure and no significant difference compared to HES 130/0.4. The arterial vasodilation and functional capillary density in the animals hemodiluted with TPE had higher values than in the animals hemodiluted with HES 130/0.4. Although the in vivo study reported positive results using this native tapioca starch-based PE, the product needs work to improve some of its physiochemical properties.

Preparation of Oxidized Starch Using Environment Friendly Chlorine Dioxide as Oxidant

In the present work, the oxidized corn starch was prepared by using chlorine dioxide as novel oxidant. It was characterized by X-ray diffraction, scanning electron microscope (SEM), and transmission electron microscope (TEM). The main factors that affect the oxidation process were studied, and the oxidation degree of oxidized starch was determined by the carboxyl content and viscosity of the product. The results show that carboxyl groups are introduced into the starch chains successfully, and the oxidation reaction mainly carries out at the amorphous area. Compared with native starch, the light transmittance and anti-retrogradation of oxidized starch increase, whereas the viscosity reduces. The best oxidized starch can be obtained at the sodium chlorate dosage of 3%, hydrochloric acid 4%, and sulfuric acid 3% (all based on the initial starch weight), while the oxidation reaction is conducted at 50°C for 5 h.

Effect of alkali and oxidative treatments on the physicochemical, pasting, thermal and morphological properties of corn starch

BACKGROUND

Few studies on starch modifications using different chemical agents are available in the literature, and no reports were found on the combined effect of oxidation and alkaline treatment of corn starch. Thus this work evaluated the physicochemical, pasting, morphological, cystallinity and thermal properties of chemically modified corn starch, after either the isolated or combined action of alkaline (sodium hydroxide) and oxidative (sodium hypochlorite) treatments.

RESULTS

The highest values for the sum of carbonyl and carboxyl and enzymatic hydrolysis occurred in starches submitted to oxidative treatment at high active chlorine concentrations. The alkali treatment in isolation modified the pasting properties, reduced the paste temperature and increased the peak viscosity, breakdown, final viscosity and setback of starches. Starch modified by the action of sodium hypochlorite and hydroxide in combination presented more severe damage on granule surfaces.

CONCLUSION

The results show that corn starch modified by the combined action of oxidative and alkaline treatments should be studied more, especially at the concentration limit of sodium hydroxide where gelatinization occurs. Under these conditions the effect of oxidation can be more intense and thus allow the production of starches with different properties and an increase in their industrial applications.

Preparation and Electrospinning of Acidified-Oxidized Potato Starch

This paper investigates the preparation and electrospinning of acidified-oxidized potato starch. In this article, acidified-oxidized potato starch was prepared by adding ammonium persulfate as an oxidizing agent and hydrochloric acid as a catalyst. The effect of reaction time, temperature, the concentration of hydrochloric acid and the content of ammonium persulfate on the viscosity and content of carboxyl were discussed. The optimum reaction conditions were as follows: 1.5 hours ,50°C, 0.5mol/l HCl, 2.5% (NH4)2S2O8. And then, the acidified-oxidized potato starch prepared at the optimum condition was dissolved in dimethyl sulfoxide (DMSO) to be electrospinned by contrast to native starch. Electrospinning of 5wt%-21wt% of modified starch in DMSO produced beads, beaded fibers, and smooth fibers, depending on the concentration range. Smooth fibers were observed until the concentration reached 19wt%, while native starch was 5wt%.