Research progress on the regulation of starch-polyphenol interactions in food processing

Starch is a fundamental material in the food industry. However, the inherent structural constraints of starch impose limitations on its physicochemical properties, including thermal instability, viscosity, and retrogradation. To address these obstacles, polyphenols are extensively employed for starch modification owing to their distinctive structural characteristics and potent antioxidant capabilities. Interaction between the hydroxyl groups of polyphenols and starch results in the formation of inclusion or non-inclusion complexes, thereby inducing alterations in the multiscale structure of starch. These modifications lead to changes in the physicochemical properties of starch, while simultaneously enhancing its nutritional value. Recent studies have demonstrated that both thermal and non-thermal processing exert a significant influence on the formation of starch-polyphenol complexes. This review meticulously analyzes the techniques facilitating complex formation, elucidating the critical factors that dictate this process. Of noteworthy importance is the observation that thermal processing significantly boosts these interactions, whereas non-thermal processing enables more precise modifications. Thus, a profound comprehension and precise regulation of the production of starch-polyphenol complexes are imperative for optimizing their application in various starch-based food products. This in-depth study is dedicated to providing a valuable pathway for enhancing the quality of starchy foods through the strategic integration of suitable processing technologies.

Recent Advances in Physical Processing Techniques to Enhance the Resistant Starch Content in Foods: A Review

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat-moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat-moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch's textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material's potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements.

A review of the effects of physical processing techniques on the characteristics of legume starches and their application in low-glycemic index foods

Physical processing techniques significantly influence the characteristics of legume starch, consequently affecting the potential applications of legume-based products. This review comprehensively examines the impact of various physical processing techniques on legume starch properties, including structure, granule morphology, gelatinization, pasting properties, solubility, and in vitro digestibility. Furthermore, it evaluates the implications of these processing methods for utilizing legumes in developing low-glycemic index (GI) foods. Notably, certain physical processing methods, such as heat-moisture treatment, ultrahigh-pressure processing, dry heat treatment, and gamma irradiation, under specific conditions, enhance the resistant starch or slowly digestible starch fractions in legume starches. This enhancement is particularly advantageous for producing low-GI foods. Conversely, techniques like annealing, extrusion, ultrasound, and germination increase starch digestibility, which is less favorable for low-GI food applications. This review also provides an up-to-date overview of the use of diverse preprocessed legume products in low-GI food production. The novelty of this review lies in its detailed comparative analysis of physical processing methods and their specific effects on legume starch digestibility, which has not been extensively covered in existing literature. The comprehensive insights presented herein will benefit the legume industry by informing effective strategies for converting legume starch into valuable low-GI products.

Effect of microwave alone and microwave-assisted modification on the physicochemical properties of starch and its application in food

Native starch has poor stability and usually requires modification to expand its industrial application range. Commonly used methods are physical, chemical, enzymatic and compound modification. Microwave radiation, as a kind of physical method, is promising due to its uniform energy radiation, greenness, safety, non-toxicity. It can meet the demand of consumers for safe food. Microwave-assisted modification with other methods can directly or indirectly affect the structure of starch granules to obtain modified starch with high degree of substitution and low viscosity, and the modification efficiency is greatly improved. This paper reviews the effect of microwave radiation on the physicochemical properties of starch, such as granule morphology, crystallization characteristics, and gelatinization characteristics, as well as the application of microwave radiation in starch modification and starch food processing. It provides theoretical references and suggestions for the research of microwave heating modified starch and the deep processing of starchy foods.

Enhancing the nonlinear rheological property and digestibility of mung bean flour gels using controlled microwave treatments: Effect of starch debranching and protein denaturation

In this study, we examined the possibility of using industrial microwave processing to enhance the gelling properties and reduce the starch digestibility of mung bean flour (MBF). MBF (12.6 % moisture) was microwaved at a power of 6 W/g to different final temperatures (100-130 °C), and then its structural and functional properties were characterized. The microwave treatment had little impact on the crystalline structure or amylose content of the starch, but it roughened the starch granule surfaces and decreased the short-range ordered structure and degree of branching. In addition, the extent of mung bean protein denaturation caused by the microwave treatment depended on the final temperature. Slightly denaturing the proteins (100 °C) did not affect the nature of the gels (protein phase dispersed in a starch phase) but the gel network became more compact. Moderately denaturing the proteins (110-120 °C) led to more compact and homogeneous starch-protein double network gels. Excessive protein denaturation (130 °C) caused the gel structure to become more heterogeneous. As a result, the facilitated tangles between starch chains by more linear starch molecules after debranching, and the protein network produced by moderate protein denaturation led to the formation of stronger gel and the improvement of plasticity during large deformation (large amplitude oscillatory shear-LAOS). Starch recrystallization, lipid complexion, and protein network retard starch digestion in the MBF gels. In conclusion, an industrial microwave treatment improved the gelling and digestive properties of MBF, and Lissajous curve has good adaptability in characterizing the viscoelasticity of gels under large deformations.

Effects of microwave radiation on the physicochemical properties, structure, and digestibility of the synthesized different crystal forms of malic acid starch ester

The effects of microwave combined with L-malic acid treatment on the degree of substitution (DS), structure, physicochemical properties, and digestibility of sweet potato starch (A-type), potato starch (B-type), and pea starch (C-type) were evaluated. The order of DS obtained was: DSM-POS > DSM-SPS > DSM-PES. Fourier transform-infrared spectroscopy (FT-IR) showed that the obtained modified starch produced a new absorption band at 1735 cm-1. Scanning electron microscopy (SEM) and polarized light microscopy indicated that different types of native starches exhibited different granular morphologies and appeared to have different degrees of damage, but still had polarized crosses after modification. Sweet potato starch had the smallest particle size, while potato starch had the largest. X-ray diffractometry (XRD) showed that the modified starches still retained the same crystal structure as the native starches, but the relative crystallinity decreased. The apparent viscosity and swelling power of modified starches dropped, but their water/oil holding capacity, amylose content, and resistant starch content all increased. The results demonstrate that the degree of influence on the structure, physicochemical properties, and digestibility of different starches varies under the same modification conditions.

High-pressure pasting performance and multilevel structures of short-term microwave-treated high-amylose maize starch

Microwave treatment is an environmentally friendly method for modification of high-amylose maize starch (HAMS). Here, the effects of short-time (≤120 s) microwave treatment on the structure and pasting of two types of HAMSs, Gelose 50 (HAMSI) and Gelose 80 (HAMSII), with apparent amylose content (AAC) of 45 % and 58 %, respectively, was studied using a multiscale approach including X-ray scattering, surface structures, particle size distribution, molecular size distributions and high temperature/pressure Rapid Visco Analysis (RVA)-4800 pasting. As compared to starch with no amylose (waxy maize starch, WMS) and 25 % amylose content (normal maize starch, NMS), HAMSI underwent similar structural and pasting changes as WMS and NMS upon microwave treatment, and it might primarily be attributed to the amylopectin fraction that was affected by cleavage of the connector chains between double helices and backbone chains, which decreased the crystallinity and thickness of the crystalline lamellae. However, the multi-scale structure of HAMSII was almost unaffected by this treatment. The pasting properties of fully gelatinized HAMSI starch showed a decrease in RVA-4800 peak and final viscosities after microwave treatment. In contrast, for HAMSII starch, the microwave treatment led to an increase in these viscosities. The combined results highlight the influence of varying AAC on the effects of microwave-mediated modification, leading to diverse alterations in the structure and functionality of starches.

The characteristics of microwave-treated insoluble and soluble dietary fibers from grape and their effects on bread quality

This study investigated the morphological and hydration properties of untreated and microwave (MW)-treated isolate forms of soluble (SDF) and insoluble dietary fibers (IDF) obtained from grapes. Then, the rheological, textural, and other physical effects of the fibers (5% flour basis) were evaluated on bread quality. For this purpose, grape pomace was valorized as the juice extraction waste. MW significantly improved hydration properties of SDF and IDF by modifying their microstructures (p < .05). SDF had a clean-cut morphology whereas IDF had an indented microstructure with a wrinkled surface. After MW treatment, deep grooves and holes were observed. These variations in the IDF structure were more extensive. DF additions influenced water absorption, mixing tolerance index, dough development time, dough stability, resistance to extension, extensibility, energy of the dough and hardness, cohesiveness, springiness, chewiness, weight loss, specific volume, crust color difference of the bread in comparison with the properties of control samples significantly (p < .05). IDF had especially pronounced effects on the dough and bread characteristics. SDF enrichment provided more comparable results with the control bread than IDF. The originality of this work is to characterize isolated (100% purity) SDFs and IDFs, then discuss their effects on semi (dough) and final (bread) product quality.

Ionizing and nonionizing radiations can change physicochemical, technofunctional, and nutritional attributes of starch

Challenges for the food/non-food applications of starch mostly arise from its low stability against severe processing conditions (i.e. elevated temperatures, pH variations, intense shear forces), inordinate retrogradability, as well as restricted applicability. These drawbacks have been addressed through the modification of starch. The escalating awareness of individuals toward the presumptive side effects of chemical modification approaches has engrossed the attention of scientists to the development of physical modification procedures. In this regard, starch treatment via ionizing (i.e. gamma, electron beam, and X-rays) and non-ionizing (microwave, radiofrequency, infrared, ultraviolet) radiations has been introduced as a potent physical strategy offering new outstanding attributes to the modified product. Ionizing radiations, through dose-dependent pathways, are able to provoke depolymerization or cross-linking/grafting reactions to the starch medium. While non-ionizing radiations could modify the starch attributes by changing the morphology/architecture of granules and inducing reorientation/rearrangement in the molecular order of starch amorphous/crystalline fractions.

Customizing Starch Properties: A Review of Starch Modifications and Their Applications

Starch has been a convenient, economically important polymer with substantial applications in the food and processing industry. However, native starches present restricted applications, which hinder their industrial usage. Therefore, modification of starch is carried out to augment the positive characteristics and eliminate the limitations of the native starches. Modifications of starch can result in generating novel polymers with numerous functional and value-added properties that suit the needs of the industry. Here, we summarize the possible starch modifications in planta and outside the plant system (physical, chemical, and enzymatic) and their corresponding applications. In addition, this review will highlight the implications of each starch property adjustment.

Enhancing micronutrient absorption through simultaneous fortification and phytic acid degradation

Phytic acid (PA), an endogenous antinutrient in cereals and legumes, hinders mineral absorption by forming less bioavailable, stable PA-mineral complexes. For individual micronutrients, the PA-to-mineral molar ratio below the critical level ensures better bioavailability and is achieved by adding minerals or removing PA from cereals and pulses. Although several PA reduction and fortification strategies are available, the inability to completely eradicate or degrade PA using available techniques always subdues fortification's impact by hindering fortified micronutrient absorption. The bioavailability of micronutrients could be increased through simultaneous PA degradation and fortification. Following primary PA reduction of the raw material, the fortification step should also incorporate additional essential control stages to further PA inactivation, improving micronutrient absorption. In this review, the chemistry of PA interaction with metal ions, associated controlling parameters, and its impact on PA reduction during fortification is also evaluated, and further suggestions were made for the fortification's success.

Microwave-Induced Behavior and Digestive Properties of the Lotus Seed Starch-Chlorogenic Acid Complex

The effect of chlorogenic acid (CA) on the dielectric response of lotus seed starch (LS) after microwave treatment, the behavior and digestive characteristics of the resulting starch/chlorogenic acid complex (LS-CA) at different degrees of gelatinization and the inhibition of α-amylase by chlorogenic acid were investigated. The variation in dielectric loss factor, ε″, and dielectric loss tangent, tanδε, of the microwave thermal conversion indicated that LS-CA had a more efficient microwave-energy-to-thermal-energy conversion efficiency than LS. This gelatinized LS-CA to a greater extent at any given temperature between 65 and 85 °C than LS, and it accelerated the degradation of the starch crystalline structure. The greater disruption of the crystal structure decreased the bound water content and increased the thermal stability of LS-CA compared to LS. The simulated in vitro digestion found that the presence of the LS-CA complex improved the slow-digestion property of lotus seed starch by increasing its content of resistant and slowly digested starch. In addition, the release of chlorogenic acid during α-amylase hydrolysis further slowed starch digestion by inhibiting α-amylase activity. These findings provide a foundation for understanding the correlation between the complex behavior and digestive properties of naturally polyphenol-rich, starch-based foods, such as LS, under microwave treatment, which will facilitate the development of starch-based foods with tailored digestion rates, lower final degrees of hydrolysis and glycemic indices.

Microwave Modification of Quinoa Grains at Constant and Varying Water Content Modulates Changes in Structural and Physico-Chemical Properties of the Resulting Flours

Microwave-assisted heat moisture treatment (MWT) was applied to quinoa grains, a nutritious gluten-free pseudocereal of great interest in food product development, to achieve the physical modification of the quinoa flour. The effect of treating quinoa grains at different initial water contents (WC; 10%, 20%, and 30%) in two operational systems was compared: one open at atmospheric pressure and variable WC (V system), and the other in hermetic containers at constant WC (C system). The morphological structure of the obtained flours and their techno-functional, rheological, and thermal properties were evaluated. MWT proved to be effective in modifying these properties, the main effects probably being caused by protein denaturation and aggregation, and intragranular molecular rearrangements of starch, with disruption of short-range molecular order and even the partial collapse of starch granules in the samples treated at the highest WC. The greatest differences were observed for the 20 and 30% WC treated-samples, particularly when using C system, which increased their water absorption capacity and decreased their foaming, emulsion, and gel-forming capacities. Based on these results, the control of WC and its evolution during MWT of quinoa grains appears to be a viable and effective approach to adapt flour functionality to the needs of food production, allowing a wider range of flour properties depending on the MWT conditions.

Impact of microwave radiation on in vitro starch digestibility, structural and thermal properties of rice flour. From dry to wet treatments

Microwave radiation (MW) is an environment-friendly technology used to physically modify flours. Rice flour was MW-treated at different moisture content (MC) (3 %, 8 %, 13 %, 15 %, 20 % and 30 %). In vitro starch digestibility was determined and related to the changes caused by MW treatment to flours' structure and thermal properties, which were influenced by MC. A reduction of 49 % and 65 % in the gelatinization enthalpy of samples treated at 20 % and 30 %MC denoted a partial gelatinization. A loss of granular crystallinity in treated samples was confirmed by XR-diffraction and FTIR, particularly at 15 %, 20 % and 30 %MC. MW promoted the formation of random-coil, α-helix and β-turn protein structure, and the disappearance of LF-β-sheet. Morphological differences were found between samples treated at 8 %MC (loss of polygonal structure, protein layer covering granules' surface and small holes) and 30 %MC (rounded and aggregated granules, covered with exudate amylose). In vitro starch digestibility revealed that samples treated at 20 % and 30 %MC showed 40 % and 47 % higher rapidly digestible starch, 48 % and 70 % lower slowly digestible starch and 90 % lower resistant starch than the untreated flour. Flour MC in MW-treatment allowed the modulation of structural and thermal characteristics of rice flour and consequently its starch hydrolysis rate.

Recent advances in starch-based magnetic adsorbents for the removal of contaminants from wastewater: A review

Considerable concern exists regarding water contamination by various pollutants, such as conventional pollutants (e.g., heavy metals and organics) and emerging micropollutants (e.g., consumer care products and interfering endocrine-related compounds). Currently, academics are continuously exploring sustainability-related materials and technologies to remove contaminants from wastewater. Magnetic starch-based adsorbents (MSAs) can combine the advantages of starch and magnetic nanoparticles, which exhibit unique critical features such as availability, cost-effectiveness, size, shape, crystallinity, magnetic properties, stability, adsorption properties, and excellent surface properties. However, limited reviews on MSAs' preparations, characterizations, applications, and adsorption mechanisms could be available nowadays. Hence, this review not only focuses on their activation and preparation methods, including physical (e.g., mechanical activation treatment, microwave radiation treatment, sonication, and extrusion), chemical (e.g., grafting, cross-linking, oxidation and esterification), and enzymatic modifications to enhance their adsorption properties, but also offers an all-round state-of-the-art analysis of the full range of its characterization methods, the adsorption of various contaminants, and the underlying adsorption mechanisms. Eventually, this review focuses on the recycling and reclamation performance and highlights the main gaps in the areas where further studies are warranted. We hope that this review will spark an interdisciplinary discussion and bring about a revolution in the applications of MSAs.

Impact of microwave irradiation on chemically modified talipot starches: A characterization study on heterogeneous dual modifications

In this study, the effect of chemical modifications such as oxidation, esterification and crosslinking was investigated alone and in combination with microwave irradiation on a non-conventional starch with 76% starch yield acquired from the trunk of matured talipot palm. The single- and dual-modifications imparted significant changes in the morphological, crystalline, pasting and rheological properties and digestibility of talipot starch. Characteristic peaks were observed in single- and dual-oxidized, esterified and crosslinked starches indicating their respective functional groups. All modifications significantly decreased (p ≤ 0.05) the relative crystallinity (RC) of talipot starches except for crosslinking, and the least RC (11.33%) was observed in microwave irradiated esterified starch. Microwave irradiation prior to chemical modifications showed a significant impact in the swelling and solubility of talipot starches. The decreased setback viscosity and increased light transmittance in single- and dual-microwave irradiated talipot starches showed their lowered retrogradation tendency, suitable for frozen foods. The resistant starch (RS) content was majorly improved in all heterogeneously dual modified talipot starches by incorporating more functional groups owed to structural and crystalline destruction in starch granules upon microwave irradiation. The highest RS content (45.02%) was observed in microwave irradiated esterified uncooked talipot starch.

An Insight into the Gelatinization Properties Influencing the Modified Starches Used in Food Industry: A review

Native starch is subjected to various forms of modification to improve its structural, mechanical, and thermal properties for wider applications in the food industry. Physical, chemical, and dual modifications have a substantial effect on the gelatinization properties of starch. Consequently, this review explores and compares the different methods of starch modification applicable in the food industry and their effect on the gelatinization properties such as onset temperature (To), peak gelatinization temperature (Tp), end set temperature (Tc), and gelatinization enthalpy (ΔH), studied using differential scanning calorimetry (DSC). Chemical modifications including acetylation and acid hydrolysis decrease the gelatinization temperature of starch whereas cross-linking and oxidation result in increased gelatinization temperatures. Common physical modifications such as heat moisture treatment and annealing also increase the gelatinization temperature. The gelatinization properties of modified starch can be applied for the improvement of food products such as ready-to-eat, easily heated or frozen food, or food products with longer shelf life.

Microwave treatment alters the fine molecular structure of waxy hull-less barley starch

Waxy hull-less barley kernels and their isolated starches were exposed to different microwave conditions (power 640, 720, and 800 W, time 60, 120 and 180 s) and changes in morphology, particle size, digestibility, rheological properties, and molecular structure were measured and analyzed. Microwave treatment caused roughness and deformation of granular surfaces, and an increase in granule size. After treatment, the in vitro digestibility of starch was increased, i.e., the RDS increased, but the RS decreased. Microwave treatment decreased the K values of the in-kernel MWI WHBS. Dynamic rheological results showed that the in-kernel MWI WHBS pastes had lower T_G'max, and higher G'_max, G'_90°C, G'_25°C, G'_0.1Hz and G'_20Hz after treatment. The chain-length distribution did not significantly change after microwave treatment. However, the results for molecular size distributions showed that the peaks of amylopectin (R_h = ~100 nm) shifted left and right, indicating that the molecular volume might become smaller or larger under different processing conditions. The primary effects of microwave treatment may be loosening the molecular structure and cutting main chains of amylopectin.

Proso-millet starch: Properties, functionality, and applications

Previously proso-millet, considered an underutilized cereal, has drawn considerable attention due to health benefits like good nutritional profile, low glycemic index, and gluten-free. The present review discusses starch extractability, structural characteristics, morphology, and physicochemical properties. Starch properties mainly depend on the amylose and amylopectin composition and distribution of brained chains. A very diverse starch structure and morphology were observed among the waxy and non-waxy cultivars. The amylose content ranged from 0.75 to 28.3% in many varieties, but exceptionally Hongmeizi variety showed a 32.3% as per the reported evidence. There are a positive correlation between the amylose content and cooking quality, thermal and pasting properties. The size and shape of smallest to largest starch granules varied between 0.3 and 17 μm and round to polygonal, respectively. The non-waxy starch varieties of proso-millet are widely used in food processing due to high resistance to swelling during heat treatment. Few food applications of proso-millet are bakery products like gluten-free bread, porridge, pasta, ready-to-eat breakfast cereals, infant foods, and distilleries. We can conclude that proso millet is an alternative to existing starch for its quality characteristics and provides insight to many food processing industries.

Effect of Continuous and Discontinuous Microwave-Assisted Heating on Starch-Derived Dietary Fiber Production

Dietary fiber can be obtained by dextrinization, which occurs while heating starch in the presence of acids. During dextrinization, depolymerization, transglycosylation, and repolymerization occur, leading to structural changes responsible for increasing resistance to starch enzymatic digestion. The conventional dextrinization time can be decreased by using microwave-assisted heating. The main objective of this study was to obtain dietary fiber from acidified potato starch using continuous and discontinuous microwave-assisted heating and to investigate the structure and physicochemical properties of the resulting dextrins. Dextrins were characterized by water solubility, dextrose equivalent, and color parameters (L* a* b*). Total dietary fiber content was measured according to the AOAC 2009.01 method. Structural and morphological changes were determined by means of SEM, XRD, DSC, and GC-MS analyses. Microwave-assisted dextrinization of potato starch led to light yellow to brownish products with increased solubility in water and diminished crystallinity and gelatinization enthalpy. Dextrinization products contained glycosidic linkages and branched residues not present in native starch, indicative of its conversion into dietary fiber. Thus, microwave-assisted heating can induce structural changes in potato starch, originating products with a high level of dietary fiber content.

Development and Characterization of Physical Modified Pearl Millet Starch-Based Films

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain; this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92-76.16 °C, 67.95-81.05 °C, and 73.78-84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G') and loss modulus (G'')) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa; the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation.

Microwave reheating increases the resistant starch content in cooked rice with high water contents

This study explored how microwave reheating (to about 73 °C at different power levels) affects the microstructure and digestion characteristics of cooked rice with different water contents (1.1 and 1.5 times that of rice in weight). Irrespective of water content, mainly the V-type crystallites remained after microwaving reheating, with slight changes in other multi-scale structural features. Only at a relatively high water content (1.5) and with a power level high enough could short-range order be reduced. Such microwave reheating increased the digestion resistance of cooked rice. At a water content of 1.1 times, increasing the microwave power led to a decreased rapid digestible starch (RDS) content and an increased resistant starch (RS) content. With a higher water content (1.5), the enhancement of digestion resistance with higher microwave power was less significant but still, a reduced slowly digestible starch (SDS) content and a higher RS content were observed.

Dielectric barrier atmospheric cold plasma applied to the modification of Ariá (Goeppertia allouia) starch: Effect of plasma generation voltage

The goal of this paper was to evaluate the influence of a range of plasma generation voltages on the physicochemical, structural, and technological properties of Aria (Goeppertia allouia) starch. Untreated (0 kV) and high voltages of cold plasma generation (7, 10, 14, and 20 kV) treated samples were evaluated according to their amylose content, pH, groups carbonyl/carboxyl, molecular size distribution, structure and technological properties (empirical viscosity, hydration properties, thermal analysis and gel strength). The applied voltage of 14 kV resulted in the greatest depolymerization of the starch chains, while 20 kV allowed the formation of oxidized complexes, promoting crosslinking of the starches chain. The cold plasma technique did not affect the levels of resistant starches, but increased the starch digestibility. The increased carbonyl and carboxyl groups also influenced the paste viscosity, improved hydration properties. This study suggests that the cold plasma technique can be useful in the controlled modification of starches, producing starches with different technological properties.

Insights into the multi-scale structural properties and digestibility of lotus seed starch-chlorogenic acid complexes prepared by microwave irradiation

By inspecting starch hierarchical structural evolution, this work explored how microwave irradiation tailored the digestion characteristics of lotus seed starch-chlorogenic acid mixtures. The results showed that after microwave treatment, the granular structure, short-range ordered structure, helical conformation, and lamellar structure of starch exhibited different degrees of disorganization. In this procedure, chlorogenic acid interacted with starch molecules to form lotus seed starch-chlorogenic acid complexes and participated in the reorganization of the matrixes of the starch substrate in three forms: V-type inclusion complex, non-inclusion complex, and simply physically entrapped. These structural changes, coupled with the inhibition of chlorogenic acid on carbohydrate hydrolyzing enzymes, contributed to the slowly digestible features of lotus seed starch-chlorogenic acid complexes. This study provided a basis for understanding the multi-scale structure-digestibility relationship of starchy foods rich in phenolic acids under microwave treatment.

Structural variations of rice starch affected by constant power microwave treatment

Although lots of work has reported the structural variations of starch in microwave treatment, most of them are detected in the environment with non-constant microwave power and inhomogeneous heating, and the results are always in poor repeatability. In this study, the equipment with constant microwave power (CPM) and homogeneous heating was designed. And the phase transition of multi-scale structure of rice starch (30% moisture content) caused by CPM treatments with two heating modes, namely rapid microwave heating (RWH) and slow microwave heating (SWH) were investigated systematically. SEM results showed that the surface of starch granules after CPM treatment were rough and broken, and the damage caused by RWH was more distinct than that by SWH. SAXS, XRD and ¹³C NMR results revealed that the CPM treatment decreased the degree of crystallinity and content of double helices of starch. Moreover, the influence of RWH on the variation of starch granules was greater than that of SWH, which can be attributed to the intensive friction and collision as well as the rapid evaporation of water in RWH treatment. Specifically, it exhibited greater destruction on the linkage of starch and the internal crystalline region in RWH treatment than SWH treatment, thereby resulting in more obvious damages on the lamellar and morphological structure of rice starch. In conclusion, CPM equipment has improved the problems of uneven heating and poor experimental repeatability. After CPM treated starch, the molecular structure of starch was destroyed, which provides a useful method to modify properties of starch.

A current review of structure, functional properties, and industrial applications of pulse starches for value-added utilization

Pulse crops have received growing attention from the agri-food sector because they can provide advantageous health benefits and offer a promising source of starch and protein. Pea, lentil, and faba bean are the three leading pulse crops utilized for extracting protein concentrate/isolate in food industry, which simultaneously generates a rising volume of pulse starch as a co-product. Pulse starch can be fractionated from seeds using dry and wet methods. Compared with most commercial starches, pea, lentil, and faba bean starches have relatively high amylose contents, longer amylopectin branch chains, and characteristic C-type polymorphic arrangement in the granules. The described molecular and granular structures of the pulse starches impart unique functional attributes, including high final viscosity during pasting, strong gelling property, and relatively low digestibility in a granular form. Starch isolated from wrinkled pea-a high-amylose mutant of this pulse crop-possesses an even higher amylose content and longer branch chains of amylopectin than smooth pea, lentil, and faba bean starches, which make the physicochemical properties and digestibility of the former distinctively different from those of common pulse starches. The special functional properties of pulse starches promote their applications in food, feed, bioplastic and other industrial products, which can be further expanded by modifying them through chemical, physical and/or enzymatic approaches. Future research directions to increase the fractionation efficiency, improve the physicochemical properties, and enhance the industrial utilization of pulse starches have also been proposed. The comprehensive information covered in this review will be beneficial for the pulse industry to develop effective strategies to generate value from pulse starch.

Review of the Most Important Methods of Improving the Processing Properties of Starch toward Non-Food Applications

Starch is the second most abundantly available natural polymer in the world, after cellulose. If we add its biodegradability and non-toxicity to the natural environment, it becomes a raw material very attractive for the food and non-food industries. However, in the latter case, mainly due to the high hydrophilicity of starch, it is necessary to carry out many more or less complex operations and processes. One of the fastest growing industries in the last decade is the processing of biodegradable materials for packaging purposes. This is mainly due to awareness of producers and consumers about the dangers of unlimited production and the use of non-degradable petroleum polymers. Therefore, in the present review, an attempt was made to show the possibilities and limitations of using starch as a packaging material. The most important physicochemical features of this biopolymer are discussed, and special attention is paid to more or less environmentally friendly methods of improving its processing properties.

Review of the beneficial and anti-nutritional qualities of phytic acid, and procedures for removing it from food products

Phytic acid (PA) is the primary phosphorus reserve in cereals and legumes which serves the biosynthesis needs of growing tissues during germination. It is generally considered to be an anti-nutritional factor found in grains because it can bind to minerals, proteins, and starch, limiting their bioavailability. However, this same mineral binding property can also confer a number of health benefits such as reducing the risk of certain cancers, supporting heart health, and managing renal stones. In addition, the ability of PA to bind minerals allows it to be used in certain food quality applications such as stabilizing the green color of vegetables, preventing lipid peroxidation, and reducing enzymatic browning in fruits/vegetables. These beneficial properties create a potential for added-value applications in the utilization of PA in many new areas. Many possible processing techniques for the preparation of raw materials in the food industry can be used to reduce the concentration of PA in foods to mitigate its anti-nutritional effects. In turn, the recovered PA by-products could be available for novel uses. In this review, a general overview of the beneficial and anti-nutritional effects of PA will be discussed and then dephytinization methods will be explained.

Modification of corn starch via innovative contactless thermal effect from induced electric field

Growing attention has been focused on modifications of starch using electric field, but electrode corrosion and metal contamination remain unavoidable during the process. To solve these problems, the magneto-induced electric field was used to assist corn starch hydrolysis due to its thermal effect. Results indicated that the method accelerated corn starch acid hydrolysis and decreased the treatment time. The reducing sugar content increased to 0.59 g/L after a 60 s treatment, which was 353.44 % higher than the 20 s treatment, while the average degree of polymerization reached a minimum. The treated starch showed increased solubility and swelling power, as well as decreased freeze-thaw stability. X-ray diffraction, fourier transform infrared spectroscopy, and scanning electron microscopy results suggested that the physicochemical changes of corn starch were due to the thermal effect of the induced electric field. This study is expected to provide an important basis for applying new electric field hydrolysis technology to starch modification.

A review on the physicochemical properties of starches modified by microwave alone and in combination with other methods

Native starches are unsuitable for most industrial applications. Therefore, they are modified to improve their application in the industry. Starch may be modified using enzymatic, genetic, chemical, and physical methods. Due to the demand for safe foods by consumers, researchers are focusing on the use of cheap, safe and environmentally friendly methods such as the use of physical means for starch modification. Microwave heating of starch is a promising physical method for starch modification due to its advantages such as homogeneous operation throughout the whole sample volume, shorter processing time, greater penetration depth and better product quality. More recently, the use of synergistic methods for starch modification is being encouraged because they confer better functionality on starch than single methods. This review summarizes the present knowledge on the structure and physicochemical properties of starches from different botanical origins modified using microwave heating alone and in combination with other starch modification methods.

Effects on the structure and properties of native corn starch modified by enzymatic debranching (ED), microwave assisted esterification with citric acid (MCAE) and by the dual ED/MCAE treatment

Native corn starch was modified by enzymatic debranching (ED), microwave assisted citric acid esterification (MCAE), and by dual ED/MCAE. The structure and properties of native starch (NS), and the resulting debranched starch (DS), microwave assisted citric acid esterified starch (MCS), and microwave assisted citric acid debranched starch (MCDS) were determined and compared. Both the morphology and crystalline regions of the modified starches were changed by ED and MCAE. ED increased significantly the amylose content and transparency, but decreased the in vitro enzymatic digestibility, freeze thaw stability and relative crystallinity of DS compared to those of NS. MCAE produced a decrease in amylose content, transparency, in vitro enzymatic digestibility, and relative crystallinity, but increased the freeze-thaw stability of MCS compared to NS, and of MCDS compared to DS. The A-type crystalline structure of NS and DS was changed to B-type crystalline structure after MCAE treatment, and a new FTIR characteristic band at 1735 cm^-1 was observed for MCS and MCDS. This work provides insights for producing esterified corn starches by a combined enzyme, microwave and organic acid novel technology.

Effect of starch microstructure on microwave-assisted esterification

Dry modification of starch, especially by microwave-assisted heating, has attracted increasing attention due to its various advantages, including energy saving, high conversion, rapidity, and avoidance of volatile organic solvents in organic synthesis. This work focuses on two fundamental issues: 1) effect of starch microstructure on dry modification; 2) effect of acid anhydride in solid and liquid states on the dry reaction, since their interfaces with solid starch are significantly different. Cornstarches with different amylose/amylopectin ratios were used to demonstrate the effect of starch microstructure, while two acid anhydrides, maleic (solid) and acetic (liquid) anhydrides, were used to study the reaction mechanisms. FTIR, SEM, XRD, and DSC were used to study the performance of modified starches and the mechanisms. It was found that the degree of substitution (DS) of starches modified by maleic anhydride generally increased with increasing amylose content since amylose contains more hydroxyl groups, resulting in higher sensitivity to microwaves. On the other hand, the DS of starches modified by acetic anhydride increased with increasing amylopectin content, since liquid acetic acid can diffuse into high-amylopectin starch granules. The higher amylopectin starches, waxy and maize, showed higher RC(%) and ∆H(%) than that of higher amylose starches G50 and G80.