The effect of ethylene glycol on starch-g-PCL graft copolymer synthesis

Functionality and characterization of modified starch films with pineapple leaf fibers

The objective of this work was to modify banana starch with pineapple leaf fibers (PALF) and its production of biodegradable films. The reaction conditions of the starch modification were a Starch/PALF mass ratio of 50, a time of 1 h and a temperature of 140 °C, to obtain a yield of 41.18 %. Characterization by FTIR and NMR confirmed that the chemical reaction was carried out. XRD and TGA analysis showed that the crystalline zones of the starch were affected during the modification and the product obtained is thermally less stable compared to unmodified starch. The modified starch showed a lower pasting profile compared to the native starch; however, the modified starch showed the ability to form a film. The starch-PALF films were obtained by the casting method and partially characterized. These films presented better mechanical properties compared to the unmodified films. Also, these films could compete with conventional non-biodegradable plastics.

Modification of banana starch (Musa paradisiaca L.) with polyethylene terephthalate: Virgin and bottle waste

Chemical modification of banana starch (Musa paradisiaca L.) with the degradation products of virgin and bottle waste of polyethylene terephthalate was carried out in situ. The modified starch was characterized by FTIR and NMR, which allowed proposing three chemical structures. SEM micrographs showed that the morphology of the modified starch granule is directly related with mass ratio of Starch/PET and type of PET used in the reaction. The crystallinity of the modified starch decreased up to 92.6% and 62.5% using bottle waste and virgin PET, respectively, according to XRD diffractograms. TGA analysis showed that the starch degradation temperature decreased by 12 °C. Modified starch films were elaborate and its electrical conductivity was found to be 2.9 times compared to that of native starch. The starch/PET film presented the highest value in the mechanical property of elongation at break compared to the starch-only film. The modified starch film was degraded above 80% by aqueous hydrolysis.

Thermal, morphological and structural characterization of a copolymer of starch and polyethylene

The objective of this paper was to perform a copolymerization between polyethylene and starch in order to obtain new environmentally friendly materials. The copolymer obtained was characterized thermally, morphologically and structurally, including its pasting profile. The starch-g-PE copolymer showed lower thermal stability compared to the control materials. FTIR analysis determined that the chemical bond signal between the starch and polyethylene in the copolymer overlaps with the native starch signals. The signal from this chemical bond was assigned by proton NMR spectroscopy at δ 4.45 ppm. X-ray studies of the copolymer showed a material with more amorphous characteristics compared to native starch. SEM analysis demonstrated the presence of cracks in the starch granules which favored the chemical interaction between the polymers. The pasting behavior of the copolymer was less pronounced compared to native starch. Therefore, the copolymerization of both polymers could be an alternative to recycle polyethylene and make biodegradable materials.

Multi-objective optimization of process conditions in the manufacturing of banana (Musa paradisiaca L.) starch/natural rubber films

Multi-objective optimization was used to evaluate the effect of adding banana (Musa paradisiaca L.) starch and natural rubber (cis-1,4-poliisopreno) at different ratios (1-13w/w) to the manufacturing process of biodegradable films, specifically the effect on the biodegradability, crystallinity and moisture of the films. A structural characterization of the films was performed by X-ray diffraction, Fourier transform infrared spectroscopy and SEM, moisture and biodegradability properties were studied. The models obtained showed that degradability vs. moisture tend to be inversely proportional and crystallinity vs. degradability tend to be directly proportional. With respect to crystallinity vs. moisture behavior, it is observed that crystallinity remains constant when moisture values remain between 27 and 41%. Beyond this value there is an exponential increase in crystallinity. These results allow for predictions on the mechanical behavior that can occur in starch/rubber films.