Starch Nanocrystals Grafted with Epichlorohydrin Dimethylamine for Methyl Blue Dye Removal

Bacterial cellulose based TiO2-CdS nanocomposite gel with enhanced photocatalytic activity for adsorptive degradation of cationic dye

Dye released by industrial is one of the main known pollutants in wastewater, which is harmfully affected to the human health. Adsorptive method by absorbents and photocatalytic degradation technique are advanced technologies to remove dyes from wastewater. However, the single technique mentioned above has imperfections limiting its application. Herein, in order to integrate the two techniques and take both advantages, bacterial cellulose (BC) based titanium dioxide (TiO2)‑cadmium sulfide (CdS) nanocomposite gel was prepared by microwave-assisted solvothermal synthesis. The BC@TiO2-CdS nanocomposite gel was characterized by SEM, EDS, XRD, XPS, Raman spectral and TG, its photocatalytic mechanism was proved by PL. The results showed the TiO2-CdS nanophotocatalyst exhibited binary hierarchical structure and followed the Z-scheme type photocatalytic system. The Z-scheme heterojunction is advantageous for photo-generated charge separation and migration. The photocatalytic performance of BC@TiO2-CdS nanocomposite gel was evaluated by MB degradation under visible light irradiation. Due to synergistic effect of BC matrix and TiO2-CdS, the as-prepared BC@TiO2-CdS nanocomposite gel possesses enhanced photocatalytic activity with 94.47 % removal of methylene blue (MB) after 180 min visible light irradiation. Therefore, this work provides a facile route to fabricate bio-mass based efficient nanophotocatalytic material for pretreating the water pollution.

Effective application of citric acid treated Trapa natans and Citrullus lanatus lignocellulosic macromolecules for adsorptive remediation of acid Violet-7 dye

The peels of Trapa natans (TRA) and Citrullus lanatus (CIT), were modified with a variety of chemicals to boost their surface for the optimization of adsorption performance by providing a greater number of additional active binding sites. Citric acid-processed peels (TRAC and CITC) had shown more favorable adsorption performance to eradicate acid violet 7 dye (AVS). Extra and additional active sites generated after chemical processing, including hydroxyl (OH), carboxyl (COOH), amines NH2, carbonyl, and ester (-O-CO-) groups, as evidenced from FTIR and SEM characterizations, may boost the potential of physicochemical integration of adsorbent surface activity in order to promote and encourage the retention of hazardous and risky AVS molecules from the water. The Langmuir isotherm assessed the qmax for the adsorption of AVS on TRAC, CITC, TRA, and CIT to be 212.8, 294, 24.3, and 60.6 mg/g, respectively, whereas the correlation coefficients assessed for both TRAC and CITC were 0.98 and for TRA and CIT were 0.97, closer to unity reflecting monolayer physio-sorption. According to Temkin, the adsorption of AVS on TRAC, TRA, CITC, and CIT gives "BT" values of 1.275, 0.947, 1.085, and 1.211 mg/g, also suggesting physio-sorption. Therefore, chemically modified peels can be employed for detoxification of AVS.

Production and characterization of starch-lignin based materials: A review

In their pristine state, starch and lignin are abundant and inexpensive natural polymers frequently considered green alternatives to oil-based and synthetic polymers. Despite their availability and owing to their physicochemical properties; starch and lignin are not often utilized in their pristine forms for high-performance applications. Generally, chemical and physical modifications transform them into starch- and lignin-based materials with broadened properties and functionality. In the last decade, the combination of starch and lignin for producing reinforced materials has gained significant attention. The reinforcing of starch matrices with lignin has received primary focus because of the enhanced water sensitivity, UV protection, and mechanical and thermal resistance that lignin introduces to starch-based materials. This review paper aims to assess starch-lignin materials' production and characterization technologies, highlighting their physicochemical properties, outcomes, challenges, and opportunities. First, this paper describes the current status, sources, and chemical modifications of lignin and starch. Next, the discussion is oriented toward starch-lignin materials and their production approaches, such as blends, composites, plasticized/crosslinked films, and coupled polymers. Special attention is given to the characterization methods of starch-lignin materials, focusing on their advantages, disadvantages, and expected outcomes. Finally, the challenges, opportunities, and future perspectives in developing starch-lignin materials, such as adhesives, coatings, films, and controlled delivery systems, are discussed.