Electrochemical Sensing Platforms of Dihydroxybenzene: Part 2 – Nanomaterials Excluding Carbon Nanotubes and Graphene

Transforming Waste into Wealth: Advanced Carbon-Based Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage

This comprehensive review addresses the need for sustainable and efficient energy storage technologies against escalating global energy demand and environmental concerns. It explores the innovative utilization of waste materials from oil refineries and coal processing industries as precursors for carbon-based electrodes in next-generation energy storage systems, including batteries and supercapacitors. These waste-derived carbon materials, such as semi-coke, coal gasification fine ash, coal tar pitch, petroleum coke, and petroleum vacuum residue, offer a promising alternative to conventional electrode materials. They present an optimal balance of high carbon content and enhanced electrochemical properties while promoting environmental sustainability through effectively repurposing waste materials from coal and hydrocarbon industries. This review systematically examines recent advancements in fabricating and applying waste-derived carbon-based electrodes. It delves into the methodologies for converting industrial by-products into high-quality carbon electrodes, with a particular emphasis on carbonization and activation processes tailored to enhance the electrochemical performance of the derived materials. Key findings indicate that while higher carbonization temperatures may impede the development of a porous structure, using KOH as an activating agent has proven effective in developing mesoporous structures conducive to ion transport and storage. Moreover, incorporating heteroatom doping (with elements such as sulfur, potassium, and nitrogen) has shown promise in enhancing surface interactions and facilitating the diffusion process through increased availability of active sites, thereby demonstrating the potential for improved storage capabilities. The electrochemical performance of these waste-derived carbon materials is evaluated across various configurations and electrolytes. Challenges and future directions are identified, highlighting the need for a deeper understanding of the microstructural characteristics that influence electrochemical performance and advocating for interdisciplinary research to achieve precise control over material properties. This review contributes to advancing electrode material technology and promotes environmental sustainability by repurposing industrial waste into valuable resources for energy storage. It underscores the potential of waste-derived carbon materials in sustainably meeting global energy storage demands.

Advancements in Olive-derived Carbon: Preparation Methods and Sustainable Applications

In the realm of material science, carbon materials, especially olive-derived carbon (ODC), have become vital due to their sustainability and diverse properties. This review examines the sustainable extraction and use of ODC, a carbohydrate-rich by-product of olive biomass. We focus on innovative preparation techniques like pyrolysis, which are crucial forenhancing ODC's microstructure and surface properties. Variables such as activating agents, impregnation ratios, and pyrolysis conditions significantly influence these properties. ODC's high specific surface area renders it invaluable for applications in energy storage (batteries and supercapacitors) and environmental sectors (water purification, hydrogen storage). Its versatility and accessibility underscore its potential for broad industrial use, makingit as a key element in sustainable development. This review provides a detailed analysis of ODC preparation methodologies, its various applications, and its role in advancing sustainable energy solutions. We highlight the novelty of ODC research and its impact on future studies, establishing this review as a crucial resource for researchers and practitioners in sustainable carbon materials. As global focus shifts towards eco-friendly solutions, ODC emerges as a critical component in shaping a sustainable, innovation-driven future.

Recent Progress in Polyaniline and its Composites for Supercapacitors

Polyaniline (PANI) has piqued the interest of nanotechnology researchers due to its potential as an electrode material for supercapacitors. Despite its ease of synthesis and ability to be doped with a wide range of materials, PANI's poor mechanical properties have limited its use in practical applications. To address this issue, researchers investigated using PANI composites with materials with highly specific surface areas, active sites, porous architectures, and high conductivity. The resulting composite materials have improved energy storage performance, making them promising electrode materials for supercapacitors. Here, we provide an overview of recent developments in PANI-based supercapacitors, focusing on using electrochemically active carbon and redox-active materials as composites. We discuss challenges and opportunities of synthesizing PANI-based composites for supercapacitor applications. Furthermore, we provide theoretical insights into the electrical properties of PANI composites and their potential as active electrode materials. The need for this review stems from the growing interest in PANI-based composites to improve supercapacitor performance. By examining recent progress in this field, we provide a comprehensive overview of the current state-of-the-art and potential of PANI-based composites for supercapacitor applications. This review adds value by highlighting challenges and opportunities associated with synthesizing and utilizing PANI-based composites, thereby guiding future research directions.

A single-atom cobalt integrated flexible sensor for simultaneous detection of dihydroxybenzene isomers

Simultaneous detection of dihydroxybenzene isomers including hydroquinone (HQ), catechol (CC), and resorcinol (RS) is significant for water quality control as they are highly toxic and often coexist. However, it is a great challenge to realize their accurate and simultaneous detection due to their similarity in structure and properties. Herein, an electrochemical flexible strip with single-atom cobalt (SA-Co/NG) was constructed through high-resolution electrohydrodynamic (EHD) printing for dihydroxybenzene isomer's simultaneous detection. Results showed that the provided SA-Co/NG strip exhibited excellent sensing performance with reliable repeatability, reproducibility, long-term stability, and flexibility. Linear ranges of 0.50-31 745 μM, 0.50-5909 μM, and 0.50-153.5 μM were achieved for HQ, CC, and RS, respectively, with a detection limit of 0.164 μM. Based on the experimental data, the mechanism concerning SA-Co/NG catalytic activity towards HQ can be deduced, starting from the combination of Co* and OH^- in water, followed by the formation of Co-OH-dihydroxybenzene, and finally leading to O-H bond dissociation to generate benzoquinone. As for CC or RS, pyridinic N or CO synergistic with a single Co atom catalyzes their oxidation. Besides, the printed flexible SA-Co/NG strip further demonstrates the accurate and simultaneous detection of HQ, CC, and RS in textile wastewater, proposing a powerful practical application.

Gold Nanomaterials and their Composites as Electrochemical Sensing Platforms for Nitrite Detection

Nitrite is one of the abundant toxic components existing in the environment and is likely to have a great potential to affect human health badly. For that reason, it has become crucial to build a reliable nitrite detection method. In recent years, several nitrite monitoring systems have been proposed. Compared with traditional analytical strategies, the electrochemical approach has a bunch of advantages, including low cost, rapid response, easy operation, simplicity, etc. In this case, noble metal nanomaterials, especially Au-based nanomaterials, have attracted attention in electrode modification because of higher catalytic activity, facile mass transfer, and broad active area for determining nitrite. This review is based on the state-of-the-art, which includes a variety of nanomaterials that have been coupled with AuNPs for the creation of nanocomposites, and the construction as well as development of electrochemical sensors for nitrite detection over the last few years (2016-2022). A background study on synthesizing different morphological AuNPs and nanocomposites has also been introduced. The fabrication methods and sensing capabilities of modified electrodes are given special consideration.

Preparation of Highly Stable and Electrochemically Active Three-dimensional Interconnected Graphene Frameworks from Jute Sticks

Over the past few years, the environmentally friendly synthesis of nanomaterials, including graphene using green chemistry, has attracted tremendous attention due to its easy handling, low cost, and biocompatibility. Here we demonstrate a facile and efficient green synthesis route for producing highly stable and electrochemically active three-dimensional interconnected graphene frameworks (3DIGF) from jute sticks. Initially, jute sticks derived three-dimensional amorphous activated carbon nanosheets (3DAACNs) were prepared at low temperatures (i.e., 850 °C) in an inert environment. The resultant 3DAACNs were then heat treated at a high temperature (i.e., 2700 °C) under an inert environment, resulting in 3DIGF. The prepared carbonaceous materials were fully characterized, and various experimental techniques confirmed the preparation of 3DIGF. The prepared 3DIGF shows a highly stable nature in thermal and chemical environments and demonstrates a highly dynamic nature for the electrooxidation of sulfide. This study could be considered a vital contribution towards the economic and simple approach for preparing 3DIGF from biomass.

Recent Advancements in Electrochemical Deposition of Metal-Based Electrode Materials for Electrochemical Supercapacitors

The demand for energy storage devices with high energy and power densities has increased tremendously in this rapidly growing world. Conventional capacitors, fuel cells, and lithium-ion batteries have been used as energy storage devices for the long term. However, supercapacitors are one of the most promising energy storage devices because of their high specific capacitance, high power density, and longer cycle life. Recent research has focused on synthesizing transition-metal oxides/hydroxides, carbon materials, and conducting polymers as supercapacitor electrode materials. The performance of supercapacitors can be improved by altering electrolytes, electrode materials, current collectors, experimental temperatures, and film thickness. Thousands of papers on supercapacitors have already been published, reflecting the significance and elucidating how much demanding such energy storage devices for this fast-growing generation. This review aims to illustrate the electrode materials loaded on various conductive substrates by electrochemical deposition employed for supercapacitors to provide broad knowledge on synthetic pathways, which will pave the way for future research. We also discussed the basic parameters involved in supercapacitor studies and the advantages of the electrochemical deposition techniques through literature analysis. Finally, future trends and directions on exploring metals/metal composites toward designing and constructing viable, high-class, and even newly featured flexible energy storage materials, electrodes, and systems are presented.

Cobalt Oxide Nanorod-Modified GCE as Sensitive Electrodes for Simultaneous Detection of Hydroquinone and Catechol

An electrochemical sensor based on a cobalt oxide nanorod (Co3O4NR) modified glassy carbon electrode (GCE) (Co3O4NR-GCE) was prepared for simultaneous and selective determination of hydroquinone (HQ) and catechol (CT). Surface morphology and crystallinity of Co3O4NR were investigated employing field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analysis. The structure (16 nm) of the Co3O4 nanorod was observed in the FESEM image. A sharp peak pattern in the XRD survey revealed the following crystal planes in Co3O4NR material: (111), (220), (311), (222), (400), (422), (511), and (440). Electrochemical characterization of modified Co3O4NR-GCE was carried out performing cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Selective and simultaneous detection of HQ and CT was carried out by performing CV and differential pulse voltammetry (DPV) analysis. In both studies, modified Co3O4NR-GCE showed well defined oxidation and reduction peaks for HQ and CT with enhanced peak current, and the oxidation peaks for HQ and CT were observed at 0.152 V and 0.254 V, respectively, in the CV analysis. Scan rate and pH variation analysis were performed to evaluate different kinetic parameters, including charge transfer coefficient (α = 0.56 for HQ and 0.66 for CT), heterogeneous charge transfer rate constant (ks = 56 for HQ and 72 for CT), and the number of electrons involved in HQ and CT oxidation. Quantitative analysis of HQ and CT was studied by observing the current response of DPV analysis with respect to concentration variation. Here, the detection limit was calculated as 0.2 µM for HQ with a linear concentration range of 5–200 µM, and 0.4 µM for CT with a linear concentration range of 5–150 µM. The practical applicability of the proposed sensor was investigated using sample solutions prepared in tap water. The reported sensor showed impressive selectivity towards HQ and CT in the presence of common interferents.

Preparation of Sulfur-doped Carbon for Supercapacitor Applications: A Review

Electrochemical capacitors, also known as supercapacitors (SCs), have lately played an important role in energy storage and conversion systems due to their specific characteristics such as high strength, durability, and environmental friendliness. A wide range of materials is used as electrodes for SC applications because the electrochemical efficiency is primarily determined by the electrode materials used. Carbonaceous materials with unique surface, chemical, electrochemical, and electronic characteristics have become attractive for energy storage research, but they cannot meet the rising need for high specific energy and specific power. Besides, heteroatom-doped carbon materials have shown pseudocapacitance characteristics and improved specific energy, specific power, and conductivity. This makes them more adaptable in SC application. Among different heteroatom doping of carbon, S-doped carbon has gained considerable attention in SC applications due to its unpaired electrons and easily polarizable nature. S-doped carbon materials-based SCs have demonstrated enhanced surface wettability, improved conductivity, and induced pseudocapacitance effect, thereby delivering improved specific energy and specific power. Many reports on S-doped carbon for SC applications have been published, but there is no specific Review on the preparation of S-doped carbon for SC applications. This Review focuses on recent developments in the field of SC electrodes made from S-doped carbon materials. Herein, the preparation methods and applications of S-doped carbon for SCs were summarized following a brief discussion of different electrochemical characterization techniques of SCs. Finally, the challenges of S-doped carbon materials and their potential prospects were discussed to give crucial insights into the favorable factors for future innovations of SC electrodes. This Review aims to provide insight for further research on the preparation of S-doped carbon for electrochemical energy storage applications.

A Review of Preparation Methods for Heterogeneous Catalysts

:

Catalysts contribute significantly to the industrial revolution in terms of reaction rates and reduction in production costs. Extensive research has been documented on various industrial catalysis in the last few decades. The performance of catalysts is influenced by many parameters, including synthesis methods. The current work overviews the most common methods applied for the synthesis of supported catalysts. This review presents the detailed background, principles, and mechanism of each preparation method. The advantages and limitations of each method have also been elaborated in detail. In addition, the applications of each method in terms of catalyst synthesis have been documented in the present review paper.

Recent Advances in Processing and Applications of Heterobimetallic Oxide Thin Films by Aerosol-assisted Chemical Vapor Deposition

The fabrication of smart, efficient, and innovative devices critically needs highly refined thin-film nanomaterials; therefore, facile, scalable, and economical methods of thin films production are highly sought-after for the sustainable growth of the hi-tech industry. The chemical vapor deposition (CVD) technique is widely implemented at the industrial level due to its versatile features. However, common issues with a precursor, such as reduced volatility and thermal stability, restrict the use of CVD to produce novel and unique materials. A modified CVD approach, named aerosol-assisted CVD (AACVD), has been the center of attention due to its remarkable tendency to fabricate uniform, homogenous, and distinct nano-architecture thin films in an uncomplicated and straightforward manner. Above all, AACVD can utilize any custom-made or commercially available precursors, which can be transformed into a transparent solution in a common organic solvent; thus, a vast array of compounds can be used for the formation of nanomaterial thin films. This review article highlights the importance of AACVD in fabricating heterobimetallic oxide thin films and their potential in making energy production (e. g., photoelectrochemical water splitting), energy storage (e. g., supercapacitors), and environmental protection (e. g., electrochemical sensors) devices. A heterobimetallic oxide system involves two metallic species either in a composite, solid solution, or metal-doped metal oxides. Moreover, the AACVD tunable parameters, such as temperature, deposition time, and precursor, which drastically affect thin films microstructure and their performance in device applications, are also discussed. Lastly, the key challenges and issues of scaling up AACVD to the industrial level and processing for emerging functional materials are also highlighted.

A Review of Supercapacitors: Materials Design, Modification, and Applications

Supercapacitors (SCs) have received much interest due to their enhanced electrochemical performance, superior cycling life, excellent specific power, and fast charging–discharging rate. The energy density of SCs is comparable to batteries; however, their power density and cyclability are higher by several orders of magnitude relative to batteries, making them a flexible and compromising energy storage alternative, provided a proper design and efficient materials are used. This review emphasizes various types of SCs, such as electrochemical double-layer capacitors, hybrid supercapacitors, and pseudo-supercapacitors. Furthermore, various synthesis strategies, including sol-gel, electro-polymerization, hydrothermal, co-precipitation, chemical vapor deposition, direct coating, vacuum filtration, de-alloying, microwave auxiliary, in situ polymerization, electro-spinning, silar, carbonization, dipping, and drying methods, are discussed. Furthermore, various functionalizations of SC electrode materials are summarized. In addition to their potential applications, brief insights into the recent advances and associated problems are provided, along with conclusions. This review is a noteworthy addition because of its simplicity and conciseness with regard to SCs, which can be helpful for researchers who are not directly involved in electrochemical energy storage.

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.

Present Status and Future Prospects of Jute in Nanotechnology: A Review

Nanotechnology has transformed the world with its diverse applications, ranging from industrial developments to impacting our daily lives. It has multiple applications throughout financial sectors and enables the development of facilitating scientific endeavors with extensive commercial potentials. Nanomaterials, especially the ones which have shown biomedical and other health-related properties, have added new dimensions to the field of nanotechnology. Recently, the use of bioresources in nanotechnology has gained significant attention from the scientific community due to its 100 % eco-friendly features, availability, and low costs. In this context, jute offers a considerable potential. Globally, its plant produces the second most common natural cellulose fibers and a large amount of jute sticks as a byproduct. The main chemical compositions of jute fibers and sticks, which have a trace amount of ash content, are cellulose, hemicellulose, and lignin. This makes jute as an ideal source of pure nanocellulose, nano-lignin, and nanocarbon preparation. It has also been used as a source in the evolution of nanomaterials used in various applications. In addition, hemicellulose and lignin, which are extractable from jute fibers and sticks, could be utilized as a reductant/stabilizer for preparing other nanomaterials. This review highlights the status and prospects of jute in nanotechnology. Different research areas in which jute can be applied, such as in nanocellulose preparation, as scaffolds for other nanomaterials, catalysis, carbon preparation, life sciences, coatings, polymers, energy storage, drug delivery, fertilizer delivery, electrochemistry, reductant, and stabilizer for synthesizing other nanomaterials, petroleum industry, paper industry, polymeric nanocomposites, sensors, coatings, and electronics, have been summarized in detail. We hope that these prospects will serve as a precursor of jute-based nanotechnology research in the future.