Turning the Page: Advancing Detection Platforms for Sulfate Reducing Bacteria and their Perks

Impact of microplastics on microbial-mediated soil sulfur transformations in flooded conditions

As emerging environmental pollutants, microplastics have become a crucial focus in environmental science research. Despite this, the impact of microplastics on soil in flooding conditions remains largely unexplored. Addressing this gap, our study examined the influence of polystyrene (PS) and polyphenylene sulfide (PPS) on the microbial populations in black soil, meadow soil, and paddy soil under flooded conditions. Given the significant regulatory influence exerted by microorganisms on sulfur transformations, our study was primarily focused on evaluating the microbial contributions to alterations in soil sulfur species. Our findings revealed several notable trends: In black soil, both PS and PPS led to a marked increase in the abundance of γ-proteobacteria and Subgroup_6, while reducing Clostridia. Ignavibacteria were found to be lower under PPS compared to PS. In meadow soil, the introduction of PPS resulted in increased levels of KD4-96 and γ-proteobacteria, while α-proteobacteria decreased. Chloroflexia under PPS was observed to be lower than under PS conditions. In paddy soil, our study identified a significant rise in Bacteroidia and Ignavibacteria, accompanied by a decrease in α-proteobacteria and γ-proteobacteria. γ-proteobacteria levels under PPS were notably higher than those under PS conditions. These shifts in microbial communities induced by both PS and PPS had a direct impact on adenosine 5'-phosphosulfate reductase, sulfite reductase, and polysulfide dioxygenase. Consequently, these changes led to soil organic sulfur decrease and sulfide increase. This study not only offers a theoretical framework but also provides empirical evidence for understanding the effects of microplastics on soil microorganisms and their role in regulating nutrient cycling, particularly in flood-prone conditions. Furthermore, this study underscores the importance of ensuring an adequate supply of sulfur in agricultural practices, such as rice and lotus root cultivation, to support optimal crop growth in the presence of microplastic pollution.

The impact of microplastics on sulfur REDOX processes in different soil types: A mechanism study

Microplastics can potentially affect the physical and chemical properties of soil, as well as soil microbial communities. This could, in turn, influence soil sulfur REDOX processes and the ability of soil to supply sulfur effectively. However, the specific mechanisms driving these effects remain unclear. To explore this, soil microcosm experiments were conducted to assess the impacts of polystyrene (PS) and polyphenylene sulfide (PPS) microplastics on sulfur reduction-oxidation (REDOX) processes in black, meadow, and paddy soils. The findings revealed that PS and PPS most significantly decreased SO42- in black soil by 9.4%, elevated SO42- in meadow soil by 20.8%, and increased S2- in paddy soil by 20.5%. PS and PPS microplastics impacted the oxidation process of sulfur in soil by influencing the activity of sulfur dioxygenase, which was mediated by α-proteobacteria and γ-proteobacteria, and the oxidation process was negatively influenced by soil organic matter. PS and PPS microplastics impacted the reduction process of sulfur in soil by influencing the activity of adenosine-5'-phosphosulfate reductase, sulfite reductase, which was mediated by Desulfuromonadales and Desulfarculales, and the reduction process was positively influenced by soil organic matter. In addition to their impacts on microorganisms, it was found that PP and PPS microplastics directly influenced the structure of soil enzymes, leading to alterations in soil enzyme activity. This study sheds light on the mechanisms by which microplastics impact soil sulfur REDOX processes, providing valuable insights into how microplastics influence soil health and functioning, which is essential for optimizing crop growth and maximizing yield in future agricultural practices.

The Roadmap of Graphene-Based Sensors: Electrochemical Methods for Bioanalytical Applications

Graphene (GR) has engrossed immense research attention as an emerging carbon material owing to its enthralling electrochemical (EC) and physical properties. Herein, we debate the role of GR-based nanomaterials (NMs) in refining EC sensing performance toward bioanalytes detection. Following the introduction, we briefly discuss the GR fabrication, properties, application as electrode materials, the principle of EC sensing system, and the importance of bioanalytes detection in early disease diagnosis. Along with the brief description of GR-derivatives, simulation, and doping, classification of GR-based EC sensors such as cancer biomarkers, neurotransmitters, DNA sensors, immunosensors, and various other bioanalytes detection is provided. The working mechanism of topical GR-based EC sensors, advantages, and real-time analysis of these along with details of analytical merit of figures for EC sensors are discussed. Last, we have concluded the review by providing some suggestions to overcome the existing downsides of GR-based sensors and future outlook. The advancement of electrochemistry, nanotechnology, and point-of-care (POC) devices could offer the next generation of precise, sensitive, and reliable EC sensors.

Novel Synthesis of Sensitive Cu-ZnO Nanorod-Based Sensor for Hydrogen Peroxide Sensing

We aimed to synthesize sensitive electrochemical sensors for hydrogen peroxide sensing by using zinc oxide nanorods grown on a fluorine-doped tin oxide electrode by using the facial hydrothermal method. It was essential to keep the surface morphology of the material (nanorods structure); due to its large surface area, the concerned material has enhanced detection ability toward the analyte. The work presents a non-enzymatic H₂O₂ sensor using vertically grown zinc oxide nanorods on the electrode (FTO) surfaces with Cu nanoparticles deposited on zinc oxide nanorods to enhance the activity. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-Ray (EDX), X-ray diffraction (XRD), and electrochemical methods were used to characterize copper–zinc oxide nanorods. In addition to the high surface area, the hexagonal Cu-ZnO nanorods exhibited enhanced electrochemical features of H₂O₂ oxidation. Nanorods made from Cu-ZnO exhibit highly efficient sensitivity of 3415 μAmM⁻¹cm⁻² low detection limits (LODs) of 0.16 μM and extremely wide linear ranges (0.001–11 mM). In addition, copper-zinc oxide nanorods demonstrated decent reproducibility, repeatability, stability, and selectivity after being used for H₂O₂ sensing in water samples with an RSD value of 3.83%. Cu nanoparticles decorated on ZnO nanorods demonstrate excellent potential for the detection of hydrogen peroxide, providing a new way to prepare hydrogen peroxide detecting devices.

Tuning the Redox Chemistry of Copper Oxide Nanoarchitectures Integrated with rGOP via Facet Engineering: Sensing H2S toward SRB Detection

The ultrasensitive determination of sulfate reducing bacteria (SRB) is of great significance for their crucial roles in environmental and industrial harms together with the early detection of microbial corrosion. In this work, we report the development of highly efficient electrocatalysts, i.e., Cu₂O-CuO extended hexapods (EHPs), which are wrapped on homemade freestanding graphene paper to construct a flexible paper electrode in the electrochemical sensing of the biomarker sulfide for SRB detection. Herein Cu₂O-CuO EHPs have been synthesized via a highly controllable and facile approach at room temperature, where the redox centers of copper oxide nanoarchitectures are tuned via facet engineering, and then they are deposited on the graphene paper surface through an electrostatic adsorption to enable homogeneous and highly dense distribution. Owing to the synergistic contribution of high electrocatalytic activity from the Cu mixed oxidation states and abundant catalytically active facets of Cu₂O-CuO EHPs and high electrical conductivity of the graphene paper electrode substrate, the resultant nanohybrid paper electrode has exhibited superb electrochemical sensing properties for H₂S with a wide linear range up to 352 μM and an extremely low detection limit (LOD) of 0.1 nM with a signal-to-noise ratio of 3 (S/N = 3), as well as high sensitivity, stability, and selectivity. Furthermore, taking advantage of the good biocompatibility and mechanical flexibility, the electrochemical sensing platform based on the proposed electrode has been applied in the sensitive detection of SRB in environmental samples through the sensing of sulfide from SRB, which holds great promise for on-site and online corrosion and environmental monitoring.

Nanomaterial-Based Label-Free Electrochemical Aptasensors for the Detection of Thrombin

Thrombin plays a central role in hemostasis and its imbalances in coagulation can lead to various pathologies. It is of clinical significance to develop a fast and accurate method for the quantitative detection of thrombin. Electrochemical aptasensors have the capability of combining the specific selectivity from aptamers with the extraordinary sensitivity from electrochemical techniques and thus have attracted considerable attention for the trace-level detection of thrombin. Nanomaterials and nanostructures can further enhance the performance of thrombin aptasensors to achieve high sensitivity, selectivity, and antifouling functions. In highlighting these material merits and their impacts on sensor performance, this paper reviews the most recent advances in label-free electrochemical aptasensors for thrombin detection, with an emphasis on nanomaterials and nanostructures utilized in sensor design and fabrication. The performance, advantages, and limitations of those aptasensors are summarized and compared according to their material structures and compositions.

Advancing interfacial properties of carbon cloth via anodic-induced self-assembly of MOFs film integrated with α-MnO2: A sustainable electrocatalyst sensing acetylcholine

The metal organic frameworks (MOFs) with tunable composition, modified structure, and morphologically controlled nanoarchitectures are quite imperative to improve the electrochemical (EC) performances of sensing platforms. Herein, EC control over the fabrication of HKUST-1 (Cu-MOFs) nanocrystals is achieved via anodic-induced electrodeposition approach following the mixing of Cu²⁺ salt precursor in the vicinity of benzene-1,3,5-tricarboxylate (BTC^3-) ligands. The problem of controlled mass transfer and slow dispersal of MOFs is resolved by EC deposition of pyramidal-octagonal MOFs on a highly conductive and flexible carbon substrate (activated carbon cloth, ACC) wrapped with rGO layers (ACC-rGO@Cu(BTC). Further, α-MnO₂ is integrated on ACC-rGO@Cu(BTC) to achieve the synergistic effect of ternary structure interfaces. The novel ACC-rGO@Cu(BTC)@MnO₂ based flexible electrode exhibits striking EC performance toward non-enzymatic sensing of acetylcholine (ACh) including wide linear range (0.1 µM - 3 mM), lowest detection limit (5 nM, S/N = 3), high selectivity, and long-term stability. Moreover, the developed sensing system has been applied for real-time detection of ACh efflux released from three different cell lines and biological matrices. Our work unlocks a new prospect of precisely structured MOFs with extensive functionalities and scaled-up fabrication methods via selection of nanoscale reaction centers to develop flexible sensing devices.