Osteoblastic differentiation and potent osteogenicity of three-dimensional hBMSC-BCP particle constructs

Functional tissue-engineered microtissue formed by self-aggregation of cells for peripheral nerve regeneration

Background

Peripheral nerve injury (PNI) is one of the essential causes of physical disability with a high incidence rate. The traditional tissue engineering strategy, Top-Down strategy, has some limitations. A new tissue-engineered strategy, Bottom-Up strategy (tissue-engineered microtissue strategy), has emerged and made significant research progress in recent years. However, to the best of our knowledge, microtissues are rarely used in neural tissue engineering; thus, we intended to use microtissues to repair PNI.

Methods

We used a low-adhesion cell culture plate to construct adipose-derived mesenchymal stem cells (ASCs) into microtissues in vitro, explored the physicochemical properties and microtissues components, compared the expression of cytokines related to nerve regeneration between microtissues and the same amount of two-dimension (2D)-cultured cells, co-cultured directly microtissues with dorsal root ganglion (DRG) or Schwann cells (SCs) to observe the interaction between them using immunocytochemistry, quantitative reverse transcription polymerase chain reaction (qRT-PCR), enzyme-linked immunosorbent assay (ELISA). We used grafts constructed by microtissues and polycaprolactone (PCL) nerve conduit to repair sciatic nerve defects in rats.

Results

The present study results indicated that compared with the same number of 2D-cultured cells, microtissue could secrete more nerve regeneration related cytokines to promote SCs proliferation and axons growth. Moreover, in the direct co-culture system of microtissue and DRG or SCs, axons of DRG grown in the direction of microtissue, and there seems to be a cytoplasmic exchange between SCs and ASCs around microtissue. Furthermore, microtissues could repair sciatic nerve defects in rat models more effectively than traditional 2D-cultured ASCs.

Conclusion

Tissue-engineered microtissue is an effective strategy for stem cell culture and therapy in nerve tissue engineering.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13287-021-02676-0.

Injectable silanized hyaluronic acid hydrogel/biphasic calcium phosphate granule composites with improved handling and biodegradability promote bone regeneration in rabbits

Biphasic calcium phosphate (BCP) granules are osteoconductive biomaterials used in clinics to favor bone reconstruction. Yet, poor cohesivity, injectability and mechanical properties restrain their use as bone fillers. In this study, we incorporated BCP granules into in situ forming silanized hyaluronic acid (Si-HA) and hydroxypropylmethylcellulose (Si-HPMC) hydrogels. Hydrogel composites were shown to be easily injectable (F < 30 N), with fast hardening properties (<5 min), and similar mechanical properties (E∼ 60 kPa). In vivo, both hydrogels were well tolerated by the host, but showed different biodegradability with Si-HA gels being partially degraded after 21d, while Si-HPMC gels remained stable. Both composites were easily injected into critical size rabbit defects and remained cohesive. After 4 weeks, Si-HPMC/BCP led to poor bone healing due to a lack of degradation. Conversely, Si-HA/BCP composites were fully degraded and beneficially influenced bone regeneration by increasing the space available for bone ingrowth, and by accelerating BCP granules turnover. Our study demonstrates that the degradation rate is key to control bone regeneration and that Si-HA/BCP composites are promising biomaterials to regenerate bone defects.

Tissue Engineering Microtissue: Construction, Optimization, and Application

Until now, there is no clear definition of microtissue; it usually refers to the microtissue formed by the aggregation of seed cells under the action of cell-cell or cell-extracellular matrix (ECM). Compared with traditional cell monolayer culture, cells are cultivated into a three-dimensional microstructure in a specific way. The microstructure characteristics of microtissue are similar to natural tissues and can promote cell proliferation and differentiation. Therefore, it has a broader range of biomedical applications in tissue engineering. The traditional tissue engineering strategy is to add high-density seed cells and biomolecules on a preformed scaffold to construct a tissue engineering graft. However, due to the destruction of the ECM of the cells cultured in a monolayer during the digestion process with trypsin, the uneven distribution of the cells in the scaffold, and the damage of various adverse factors after the cells are implanted in the scaffold, this strategy is often ineffective, and the subsequent applications still face challenges. This article reviews the latest researches of a new strategy-tissue engineering microtissue strategy; discuss several traditional construction methods, structure, and function optimization; and practical application of microtissue. The review aims to provide a reference for future research on tissue engineering microtissue. Impact statement The traditional tissue engineering strategies have several disadvantages, researchers have conducted extensive research on tissue engineering microtissues in recent years, and they make significant progress. Microtissue is a kind of microtissue with three-dimensional structure, its microstructure is similar to that of natural tissue. In addition, microtissue implantation can protect cells from mechanical interference, inflammation, and other adverse factors. Furthermore, it improves the survival rate of cells and the therapeutic effect of tissue-engineered grafts. However, the practical conditions, advantages, and disadvantages of tissue engineering microtissue have not been fully elucidated. The purpose of this review is to discuss the latest research progress of microtissue and provide a reference for future research.

In situ production of pre-vascularized synthetic bone grafts for regenerating critical-sized defects in rabbits

Reconstructing large bone defects caused by severe trauma or resection of tumors remains a challenge for surgeons. A fibula free flap and its vascularized bed can be transplanted to the reconstruction site to achieve healing. However, this technique adds morbidity, and requires microsurgery and sculpting of the bone tissue to adapt the graft to both the vasculature and the anatomy of the defect. The aim of the current study was to evaluate an alternative approach consisting of the in situ production of a pre-vascularized synthetic bone graft and its subsequent transplantation to a critical-sized bone defect. 3D printed chambers containing biphasic calcium phosphate (BCP) granules, perfused by a local vascular pedicle, with or without the addition of stromal vascular fraction (SVF), were subcutaneously implanted into New Zealand White female rabbits. SVF was prepared extemporaneously from autologous adipose tissue, the vascular pedicle was isolated from the inguinal site, while BCP granules alone served as a control group. After 8 weeks, the constructs containing a vascular pedicle exhibited abundant neovascularization with blood vessels sprouting from the pedicle, leading to significantly increased vascularization compared to BCP controls. Pre-vascularized synthetic bone grafts were then transplanted into 15 mm critical-sized segmental ulnar defects for a further 8 weeks. Micro-CT and decalcified histology revealed that pre-vascularization of synthetic bone grafts led to enhanced bone regeneration. This pre-clinical study demonstrates the feasibility and efficacy of the in situ production of pre-vascularized synthetic bone grafts for regenerating large bone defects, thereby addressing an important clinical need. STATEMENT OF SIGNIFICANCE: The current gold standard in large bone defect regeneration is vascularized fibula grafting. An alternative approach consisting of in situ production of a pre-vascularized synthetic bone graft and its subsequent transplantation to a bone defect is presented here. 3D printed chambers were filled with biphasic calcium phosphate granules, supplemented with autologous stromal vascular fraction and an axial vascular pedicle and subcutaneously implanted in inguinal sites. These pre-vascularized synthetic grafts were then transplanted into critical-sized segmental ulnar defects. Micro-CT and decalcified histology revealed that the pre-vascularized synthetic bone grafts led to higher bone regeneration than non-vascularized constructs. An alternative to vascularized fibula grafting is provided and may address an important clinical need for large bone defect reconstruction.

Effect of metformin on dental pulp stem cells attachment, proliferation and differentiation cultured on biphasic bone substitutes

OBJECTIVE

To evaluate to the effect of metformin on attachment of human dental pulp stem cells (hDPSCs) and their proliferation and osteogenic differentiation on biphasic hydroxyapatite/beta-tricalcium phosphate granules of macro-porous biphasic calcium phosphate (MBCP).

MATERIALS AND METHODS

This in vitro study included four groups: A:hDPSCs + MBCP + Metfromin, B:hDPSCs + MBCP, C:hDPSCs + Metformin and D:hDPSCs (control). Attachment of hDPSCs to bone granules in groups A and B was observed by scanning electron microscopy on days 1 and 7 of cultivation. Cell viability was assessed by MTT assay on days 1, 3, and 7 after cell seeding. Differentiation of the hDPSCs was assessed by measurement of alkaline phosphatase activity on days 3, 7, 14 and 21 after cell culturing in standard and osteogenic media. The data was analyzed by two-way ANOVA at a significance level of p = 0.05.

RESULTS

The hDPSCs had firmly attached to the surface of MBCP granules, especially in group A. The MTT values increased in all groups from day 1 to day 7 (p < 0.001). The highest MTT values were observed in group C followed by the control group and groups A and B (p < 0.001). Alkaline phosphatase activity also increased in all groups between days 3 to 21 (p < 0.001) except between days 7 and 14 in standard media (p = 0.094). In standard media, groups with MBCP granules (A and B) showed higher activity (p < 0.05). In osteogenic media, the groups with metformin (A and C) showed higher alkaline phosphatase activity (p < 0.05).

CONCLUSION

This in vitro study showed that 100 Mol/L metformin increased attachment and proliferation of hDPSCs on biphasic granules. Osteogenic differentiation of hDPSCs also increased in the presence of metformin.

Allogenic vs. synthetic granules for bone tissue engineering: an in vitro study

The aim of this study was to compare human dental pulp stem cells' (DPSCs) attachment, proliferation and osteogenic differentiation on allogenic and synthetic biphasic bone granules. In this in vitro study, two types of bone granules were used: allograft [freeze-dried bone allograft (FDBA)] and biphasic granules [hydroxyapatite/beta-tricalcium phosphate (HA/β-TCP)]. By isolation of DPSCs, their attachment to bone granules was observed by scanning electron microscope (SEM) at day 1 and 7 of cultivation. Vital cells were measured by MTT assay at 1, 3, and 7 days of cell culture. Comparison of vital cells at different time points was considered as cell proliferation. Finally, differentiation of DPSCs was evaluated by measurement of alkaline phosphatase (ALP) activity 3, 7, 14, and 21 days after cell seeding in standard and osteogenic media. Data were analyzed using two-way ANOVA with a significant level of 0.05. Attachment of DPSCs on FDBA granules seemed relatively stronger. The number of cells (based on MTT values) and ALP activity of the cells cultured on both study groups increased between time points (p ≤ 0.001). FDBA granules had more cells compared to HA/β-TCP granules (p < 0.001). There was no significant difference between ALP activity of two study groups cultured in the standard medium (p = 0.347) and they were both higher than the control group (p < 0.05). In the osteogenic medium, FDBA group had significantly higher ALP activity compared to HA/β-TCP (p = 0.035) and control (p = 0.001) groups while there was no significant difference between ALP activity of HA/β-TCP and control groups (p = 0.645). In conclusion, current in vitro study revealed that FDBA granules have more potential in supporting DPSCs attachment and proliferation and inducing their ALP activity compared to HA/β-TCP granules. Therefore, FDBA could serve as a proper bone substitute material.

Inferior In Vivo Osteogenesis and Superior Angiogenesis of Human Adipose‐Derived Stem Cells Compared with Bone Marrow‐Derived Stem Cells Cultured in Xeno‐Free Conditions

The possibility of using adipose tissue-derived stromal cells (ATSC) as alternatives to bone marrow-derived stromal cells (BMSC) for bone repair has garnered interest due to the accessibility, high cell yield, and rapid in vitro expansion of ATSC. For clinical relevance, their bone forming potential in comparison to BMSC must be proven. Distinct differences between ATSC and BMSC have been observed in vitro and comparison of osteogenic potential in vivo is not clear to date. The aim of the current study was to compare the osteogenesis of human xenofree-expanded ATSC and BMSC in vitro and in an ectopic nude mouse model of bone formation. Human MSC were implanted with biphasic calcium phosphate biomaterials in subcutis pockets for 8 weeks. Implant groups were: BMSC, ATSC, BMSC and ATSC mixed together in different ratios, as well as MSC primed with either osteogenic supplements (250 μM ascorbic acid, 10 mM β-glycerolphosphate, and 10 nM dexamethasone) or 50 ng/ml recombinant bone morphogenetic protein 4 prior to implantation. In vitro results show osteogenic gene expression and differentiation potentials of ATSC. Despite this, ATSC failed to form ectopic bone in vivo, in stark contrast to BMSC, although osteogenic priming did impart minor osteogenesis to ATSC. Neovascularization was enhanced by ATSC compared with BMSC; however, less ATSC engrafted into the implant compared with BMSC. Therefore, in the content of bone regeneration, the advantages of ATSC over BMSC including enhanced angiogenesis, may be negated by their lack of osteogenesis and prerequisite for osteogenic differentiation prior to transplantation. Stem Cells Translational Medicine 2017;6:2160-2172.

In vitro and in vivo evaluation of osteoinductivity and bone fusion ability of an activin a/BMP2 chimera (AB204): a comparison study between AB204 and rhBMP-2

This study compared osteoinductivity and osteogenic capacity between AB204 and rhBMP-2 using hMSCs in vitro and a beagle's posterolateral spinal fusion model. Cultured hMSCs were treated with AB204 or rhBMP-2 with low to high doses. Three male beagles were performed posterolateral spinal fusion with biphasic calcium phosphate (2 ml) + AB204 or rhBMP-2 (20, 50 or 200 µg). They were euthanized after 8 weeks. The fusion rate and bone formation of spine samples were examined. AB204 had higher alkaline phosphatase activity, mineralization and osteogenic-related gene expression than rhBMP-2. Fusion rates in all rhBMP-2 groups were 0. They were 100% for 50 μg and 200 μg AB204 groups. Therefore, AB204 showed higher osteogenicity than rhBMP-2. It could be a better bone graft substitute.

Potency Biomarker Signature Genes from Multiparametric Osteogenesis Assays: Will cGMP Human Bone Marrow Mesenchymal Stromal Cells Make Bone?

In skeletal regeneration approaches using human bone marrow derived mesenchymal stromal cells (hBM-MSC), functional evaluation before implantation has traditionally used biomarkers identified using fetal bovine serum-based osteogenic induction media and time courses of at least two weeks. However, emerging pre-clinical evidence indicates donor-dependent discrepancies between these ex vivo measurements and the ability to form bone, calling for improved tests. Therefore, we adopted a multiparametric approach aiming to generate an osteogenic potency assay with improved correlation. hBM-MSC populations from six donors, each expanded under clinical-grade (cGMP) conditions, showed heterogeneity for ex vivo growth response, mineralization and bone-forming ability in a murine xenograft assay. A subset of literature-based biomarker genes was reproducibly upregulated to a significant extent across all populations as cells responded to two different osteogenic induction media. These 12 biomarkers were also measurable in a one-week assay, befitting clinical cell expansion time frames and cGMP growth conditions. They were selected for further challenge using a combinatorial approach aimed at determining ex vivo and in vivo consistency. We identified five globally relevant osteogenic signature genes, notably TGF-ß1 pathway interactors; ALPL, COL1A2, DCN, ELN and RUNX2. Used in agglomerative cluster analysis, they correctly grouped the bone-forming cell populations as distinct. Although donor #6 cells were correlation slope outliers, they contrastingly formed bone without showing ex vivo mineralization. Mathematical expression level normalization of the most discrepantly upregulated signature gene COL1A2, sufficed to cluster donor #6 with the bone-forming classification. Moreover, attenuating factors causing genuine COL1A2 gene down-regulation, restored ex vivo mineralization. This suggested that the signature gene had an osteogenically influential role; nonetheless no single biomarker was fully deterministic whereas all five signature genes together led to accurate cluster analysis. We show proof of principle for an osteogenic potency assay providing early characterization of primary cGMP-hBM-MSC cultures according to their donor-specific bone-forming potential.

Osteoblastic and osteoclastic differentiation of human mesenchymal stem cells and monocytes in a miniaturized three-dimensional culture with mineral granules

The pathologies of the skeleton have a significant socioeconomic impact on our population. Although therapies have improved the treatment of osteosarcoma and osteoporosis, their efficacy still remains limited. In this context, we developed a miniaturized 3-D culture model of bone cells on calcium phosphate ceramics. Human bone marrow mesenchymal stem cells (MSCs) were three-dimensionally cultured on particles of biphasic calcium phosphate (BCP, 125-200μm) in osteogenic media. The MSCs seeded on the BCP particles adhered and proliferated, producing abundant collagenous extracellular matrix (ECM). Light and confocal laser scanning microscopy showed that the MSCs created bridges between the BCP particles and formed a 3-D structure. Energy dispersive X-ray analysis in a scanning electron microscope confirmed the mineralization of the collagen matrix. The 96-well sized bone constructs were tested by immunohistology and transcription analysis, proving cell differentiation. Both techniques corroborated the osteoblastic differentiation with high production of bone sialoprotein and osteocalcin. Peripheral blood CD14-positive monocytes (MOs) were pre-differentiated into osteoclasts prior to seeding on the 3-D constructs. Multinucleated and tartrate-resistant acid phosphatase-positive cells were also identified at the surface of the 3-D constructs after 90days of culture. In addition, cell viability within these constructs was measured by flow cytometry. In summary, we have developed a miniaturized 3-D culture of bone cell precursors with osteoblasts and osteoclasts. This 3-D culture may make it possible to test the effects of new drugs for bone healing, osteoporosis and osteosarcomas, in more appropriate cell-cell and cell-matrix interactions than conventional 2-D cultures.

Bone tissue formation with human mesenchymal stem cells and biphasic calcium phosphate ceramics: the local implication of osteoclasts and macrophages

Human mesenchymal stem cells (hMSC) have immunomodulative properties and, associated with calcium phosphate (CaP) ceramics, induce bone tissue repair. However, the mechanisms of osteoinduction by hMSC with CaP are not clearly established, in particular the role of osteoclasts and macrophages. Biphasic calcium phosphate (BCP) particles were implanted with or without hMSC in the paratibial muscles of nude mice. hMSC increased osteoblastic gene expression at 1 week, the presence of macrophages at 2 and 4 weeks, osteoclastogenesis at 4 and 8 weeks, and osteogenesis at 4 and 8 weeks. hMSC disappeared from the implantation site after 2 weeks, indicating that hMSC were inducers rather than effectors of bone formation. Induced blockage of osteoclastogenesis by anti-Rankl treatment significantly impaired bone formation, revealing the pivotal role of osteoclasts in bone formation. In summary, hMSC positively influence the body foreign reaction by attracting circulating haematopoietic stem cells and inducing their differentiation into macrophages M1 and osteoclasts, thus favouring bone formation.

Determining a clinically relevant strategy for bone tissue engineering: an "all-in-one" study in nude mice

Purpose

Autologous bone grafting (BG) remains the standard reconstruction strategy for large craniofacial defects. Calcium phosphate (CaP) biomaterials, such as biphasic calcium phosphate (BCP), do not yield consistent results when used alone and must then be combined with cells through bone tissue engineering (BTE). In this context, total bone marrow (TBM) and bone marrow-derived mesenchymal stem cells (MSC) are the primary sources of cellular material used with biomaterials. However, several other BTE strategies exist, including the use of growth factors, various scaffolds, and MSC isolated from different tissues. Thus, clinicians might be unsure as to which method offers patients the most benefit. For this reason, the aim of this study was to compare eight clinically relevant BTE methods in an “all-in-one” study.

Methods

We used a transgenic rat strain expressing green fluorescent protein (GFP), from which BG, TBM, and MSC were harvested. Progenitor cells were then mixed with CaP materials and implanted subcutaneously into nude mice. After eight weeks, bone formation was evaluated by histology and scanning electron microscopy, and GFP-expressing cells were tracked with photon fluorescence microscopy.

Results/Conclusions

Bone formation was observed in only four groups. These included CaP materials mixed with BG or TBM, in which abundant de novo bone was formed, and BCP mixed with committed cells grown in two- and three-dimensions, which yielded limited bone formation. Fluorescence microscopy revealed that only the TBM and BG groups were positive for GFP expressing-cells, suggesting that these donor cells were still present in the host and contributed to the formation of bone. Since the TBM-based procedure does not require bone harvest or cell culture techniques, but provides abundant de novo bone formation, we recommend consideration of this strategy for clinical applications.

Concise review: cell-based strategies in bone tissue engineering and regenerative medicine

Cellular strategies play an important role in bone tissue engineering and regenerative medicine (BTE/RM). Variability in cell culture procedures (e.g., cell types, cell isolation and expansion, cell seeding methods, and preculture conditions before in vivo implantation) may influence experimental outcome. Meanwhile, outcomes from initial clinical trials are far behind those of animal studies, which is suggested to be related to insufficient nutrient and oxygen supply inside the BTE/RM constructs as some complex clinical implementations require bone regeneration in too large a quantity. Coculture strategies, in which angiogenic cells are introduced into osteogenic cell cultures, might provide a solution for improving vascularization and hence increasing bone formation for cell-based constructs. So far, preclinical studies have demonstrated that cell-based tissue-engineered constructs generally induce more bone formation compared with acellular constructs. Further, cocultures have been shown to enhance vascularization and bone formation compared with monocultures. However, translational efficacy from animal studies to clinical use requires improvement, and the role implanted cells play in clinical bone regeneration needs to be further elucidated. In view of this, the present review provides an overview of the critical procedures during in vitro and in vivo phases for cell-based strategies (both monoculture and coculture) in BTE/RM to achieve more standardized culture conditions for future studies, and hence enhance bone formation.