Composites of gellan gum hydrogel enzymatically mineralized with calcium-zinc phosphate for bone regeneration with antibacterial activity

Repair of Large-Scale Rib Defects Based on Steel-Reinforced Concrete-Designed Biomimetic 3D-Printed Scaffolds with Bone-Mineralized Microenvironments

Tissue engineering technology provides a promising approach for large-scale bone reconstruction in cases of extensive chest wall defects. However, previous studies did not consider meticulous scaffold design specific to large-scale rib regeneration in terms of three-dimensional (3D) shape, proper porous structures, enough mechanical strength, and osteogenic microenvironments. Thus, there is an urgent need to develop an appropriate bone biomimetic scaffold (BBS) to address this problem. In this study, a BBS with controllable 3D morphology, appropriate mechanical properties, good biocompatibility and biodegradability, porous structure suitable for cell loading, and a biomimetic osteogenic inorganic salt (OIS) microenvironment was successfully prepared by integrating computer-aided design, 3D-printing, cast-molding, and freeze-drying technologies. The addition of the OIS in the scaffold substantially promoted ectopic bone regeneration in vivo, which might be attributed to the activation of osteogenic and angiogenic signaling pathways as well as upregulated expression of osteogenic genes. More importantly, dual long rib defects could be successfully repaired and medullary cavity recanalized by the rib-shaped mature cortical bone, which might be mediated by the activation of osteoclast signaling pathways. Thus, this paper presents a reliable BBS and proposes a new strategy for the repair of large-scale bone defects.

Regulating Macrophage Polarization in High Glucose Microenvironment Using Lithium-Modified Bioglass-Hydrogel for Diabetic Bone Regeneration

Diabetes mellitus is a chronic metabolic disease with a proinflammatory microenvironment, causing poor vascularization and bone regeneration. Due to the lack of effective therapy and one-sided focus on the direct angiogenic properties of biomaterials and osteogenesis stimulation, the treatment of diabetic bone defect remains challenging and complex. In this study, using gelatin methacryloyl (GelMA) as a template, a lithium (Li) -modified bioglass-hydrogel for diabetic bone regeneration is developed. It exhibits a sustained ion release for better bone regeneration under diabetic microenvironment. The hydrogel is shown to be mechanically adaptable to the complex shape of the defect. In vitro, Li-modified bioglass-hydrogel promoted cell proliferation, direct osteogenesis, and regulated macrophages in high glucose (HG) microenvironment, with the secretion of bone morphogenetic protein-2 and vascular endothelial growth factor to stimulate osteogenesis and neovascularization indirectly. In vivo, composite hydrogels containing GelMA and Li-MBG (GM/M-Li) release Li ions to relieve inflammation, providing an anti-inflammatory microenvironment for osteogenesis and angiogenesis. Applying Li-modified bioglass-hydrogel, significantly enhances bone regeneration in a diabetic rat bone defect. Together, both remarkable in vitro and in vivo outcomes in this study present an opportunity for diabetic bone regeneration on the basis of HG microenvironment.

Hydrogels and Hydrogel Nanocomposites: Enhancing Healthcare through Human and Environmental Treatment

Humans are constantly exposed to exogenous chemicals throughout their life, which can lead to a multitude of negative health impacts. Advanced materials can play a key role in preventing or mitigating these impacts through a wide variety of applications. The tunable properties of hydrogels and hydrogel nanocomposites (e.g., swelling behavior, biocompatibility, stimuli responsiveness, functionality, etc.) have deemed them ideal platforms for removal of environmental contaminants, detoxification, and reduction of body burden from exogenous chemical exposures for prevention of disease initiation, and advanced treatment of chronic diseases, including cancer, diabetes, and cardiovascular disease. In this review, three main junctures where the use of hydrogel and hydrogel nanocomposite materials can intervene to positively impact human health are highlighted: 1) preventing exposures to environmental contaminants, 2) prophylactic treatments to prevent chronic disease initiation, and 3) treating chronic diseases after they have developed.

Zn-Doped CaP-Based Coatings on Ti–6Al–4V and Ti–6Al–7Nb Alloys Prepared by Magnetron Sputtering: Controllable Biodegradation, Bacteriostatic, and Osteogenic Activities

New TiNb-based alloys, such as Ti–6Al–7Nb, are currently being studied around the world as an alternative to other Ti alloys, e.g., instead of Ti–6Al–4V. We conducted a pilot study where thin (approximately 1.2 micron) CaP coatings containing low doses of Zn2+ (0.4–0.8 wt.%) were prepared by the radio frequency magnetron sputtering (RFMS) of Zn-hydroxyapatite (HA) target on Ti–6Al–4V and Ti–6Al–7Nb substrates and investigated their physicochemical properties, in vitro solubility, cytotoxicity, and antibacterial and osteogenic activities. The thickness of the obtained coatings was approximately 1.2–1.3 microns. Zn substitution did not result in roughness or structural or surface changes in the amorphous CaP coatings. The distributions of Ca, P, and Zn were homogeneous across the film thickness as shown by the EDX mapping of these elements. Zn doping of CaP coatings on both types of Ti-based alloys statistically influenced the results of the scratch-test. However, obtained values are satisfactory to use Zn-CaP coatings on biomedical implants. Increased Zn2+ release vs. tapered output of Ca and phosphate ions occurred during 5 weeks of an in vitro immersion test in 0.9% NaCl solution. Ti–6Al–7Nb alloy, unlike Ti–6Al–4V, promoted more linear biodegradation of CaP coatings in vitro. As a result, CaP-based surfaces on Ti–6Al–7Nb, compared with on Ti–6Al–4V alloy, augmented the total areas of Alizarin red staining in a 21-day culture of human adipose-derived mesenchymal stem cells in a statistically significant manner. Moreover, Zn–CaP coatings statistically reduced leukemic Jurkat T cell survival within 48 h of in vitro culture. Along with the higher solubility of the Zn–CaP surface, a greater reduction (4- to 5.5-fold) in Staphylococcus aureus growth was observed in vitro when 7-day extracts of the coatings were added into the microbial culture. Hence, Zn–CaP-coated Ti–6Al–7Nb alloy with controllable biodegradation as prepared by RFMS is a prospective material suitable for bone applications in cases where there is a risk of bacterial contamination with severe consequences, for example, in leukemic patients. Further research is needed to closely investigate the mechanical features and pathways of their solubility and antimicrobial, antitumor, and osteogenic activities.

Rationally designed protein cross-linked hydrogel for bone regeneration via synergistic release of magnesium and zinc ions

The development of recombinant protein cross-linked injectable hydrogels with good mechanical strength and effective drug loading capacity for bone regeneration is extremely attractive and rarely reported. Here, we report the fabrication of a smart hydrogel delivery system by incorporating a rationally designed T4 lysozyme mutant (T4M) to mediate the localized delivery and synergistic release of Mg²⁺ and Zn²⁺ for bone repair. Apart from its intrinsic antibacterial properties, T4M bears abundant free amine groups on its surface to function as effective covalent crosslinkers to strengthen the hydrogel network as well as exhibits specific binding affinity to multivalent cations such as Zn²⁺. Moreover, the integrin receptor-binding Arg-Gly-Asp (RGD) sequence was introduced onto the C-terminus of T4 lysozyme to improve its cellular affinity and further facilitate rapid tissue regeneration. The final composite hydrogel displays excellent injectability, improved mechanical properties, antibacterial activity, and unique bioactivities. The effective loading of Mg²⁺/Zn²⁺ in the hydrogels could mediate the sequential and sustained release of Mg²⁺ and Zn²⁺, thereby resulting in synergistic enhancement on bone regeneration through modulation of the MAPK signaling pathway. We believe that the strategy proposed in this paper opens up a new route for developing protein cross-linked smart delivery systems for tissue regeneration.

Synthesis and enhanced photocatalytic activity of the flower-like CdS/Zn3(PO4)2 Z-scheme heteronanostructures

CdS/Zn3(PO4)2 Z-scheme heteronanostructures were prepared through a simple hydrothermal route and precipitation methods, and the efficiency for the photocatalytic degradation of MB solution can be improved greatly.

Mineralization of Biomaterials for Bone Tissue Engineering

Mineralized biomaterials have been demonstrated to enhance bone regeneration compared to their non-mineralized analogs. As non-mineralized scaffolds do not perform as well as mineralized scaffolds in terms of their mechanical and surface properties, osteoconductivity and osteoinductivity, mineralization strategies are promising methods in the development of functional biomimetic bone scaffolds. In particular, the mineralization of three-dimensional (3D) scaffolds has become a promising approach for guided bone regeneration. In this paper, we review the major approaches used for mineralizing tissue engineering constructs. The resulting scaffolds provide minerals chemically similar to the inorganic component of natural bone, carbonated apatite, Ca5(PO4,CO3)3(OH). In addition, we discuss the characterization techniques that are used to characterize the mineralized scaffolds, such as the degree of mineralization, surface characteristics, mechanical properties of the scaffolds, and the chemical composition of the deposited minerals. In vitro cell culture studies show that the mineralized scaffolds are highly osteoinductive. We also summarize, based on literature examples, the applications of 3D mineralized constructs, as well as the rationale behind their use. The mineralized scaffolds have improved bone regeneration in animal models due to the enhanced mechanical properties and cell recruitment capability making them a preferable option for bone tissue engineering over non-mineralized scaffolds.

Application of Gellan Gum-Based Scaffold for Regenerative Medicine

Gellan gum (GG) is a linear microbial exopolysaccharide which is derived naturally by the fermentation process of Pseudomonas elodea. Application of GG in tissue engineering and regeneration medicine (TERM) is already over 10 years and has shown great potential. Although this biomaterial has many advantages such as biocompatibility, biodegradability, nontoxic in nature, and physical stability in the presence of cations, a variety of modification methods have been suggested due to some disadvantages such as mechanical properties, high gelation temperature, and lack of attachment sites. In this review, the application of GG-based scaffold for tissue engineering and approaches to improve GG properties are discussed. Furthermore, a recent trend and future perspective of GG-based scaffold are highlighted.

Screening and enzymatic activity of high-efficiency gellan lyase producing bacteria Pseudoalteromonas hodoensis PE1

Gellan is a widely used microbial polysaccharide and one of the more effective ways to expand its application value would be to investigate the mechanism of gellan lyase and to produce gellan oligosaccharide. In this study, efficient gellan degrading bacteria were screened. One of the strains with high efficient gellan degradation capacity was labeled PE1. Through physiological and biochemical analysis of 16S rDNA, the species was identified as Pseudoalteromonas hodoensis. The optimum conditions for enzymatic activity and how it was affected by metal ions were determined, and the results showed that the lyase activities were much higher than those of previously reported (about 20 times). The gellan degradation products were determined by thin-layer chromatography and the oligosaccharides were determined by high-efficiency liquid chromatography to analyze the action site of lyase. This study laid a solid foundation which elucidates the production and application of gellan oligosaccharides. Research highlights ● High efficiency gellan lyase producing bacteria ● Optimization of reaction conditions for gellan degradation ● Oligosaccharides were detected by TLC and HPLC to speculate the lyase action sites.

Electrospun polycaprolactone membranes with Zn-doped bioglass for nasal tissues treatment

In this work, composite membranes were investigated as future components of a layered implant for the reconstruction of nasal septum. Incorporation of zinc ions into nasal implants could potentially provide antibacterial properties to decrease or eliminate bacterial infections and subsequent surgical complications. Two types of membranes were prepared using an electrospinning method: PCL with bioglass and PCL with bioglass doped with Zn. The aim of this work was to investigate the influence of bioglass addition on the morphology, fiber diameter and composition of the membranes. The apatite-forming ability was examined in Simulated Body Fluid (SBF). The cytotoxicity of the membranes, ALP activity and in vitro mineralization were evaluated in cell culture. The mineralization and ALP activity was higher for polycaprolactone membranes modified with Zn doped bioglass than compared to pure PCL membranes or control material. The results proved that the presence of Zn²⁺ in the electrospun membranes = influence the osteogenic differentiation of cells.

Gellan Gum-based luminal fillers for peripheral nerve regeneration: an in vivo study in the rat sciatic nerve repair model

Peripheral nerve injuries (PNI) resulting in a gap to be bridged between the transected nerve ends are commonly reconstructed with autologous nerve tissue, but there is a need for valuable alternatives. This experimental work considers the innovative use of the biomaterial Gellan Gum (GG) as a luminal filler for nerve guidance channels made from chitosan with a 5% degree of acetylation. The engineered constructs should remodel the structural support given to regenerating axons by the so-called bands of Büngner. Four different GG formulations were produced by combining varying amounts of High-Acyl GG (HA-GG) and Methacrylated GG (MA-GG). The effective porosity of the freeze-dried networks was analysed by SEM and micro-CT 3D reconstructions, while the degradation and swelling abilities were characterized in vitro for up to 30 days. The metabolic activity and viability of immortalized Schwann cells seeded onto the freeze-dried networks were also evaluated. Finally, the developed hydrogel formulations were freeze-dried within the chitosan nerve guides and implanted in a 10 mm rat sciatic nerve defect. Functional and histomorphological analyses after 3, 6, and 12 weeks in vivo revealed that although it did not result in improved nerve regeneration, the NGC25:75 formulations could provide a basis for further development of GG scaffolds as luminal fillers for hollow nerve guidance channels.

Tissue engineering with gellan gum

Engineering complex tissues for research and clinical applications relies on high-performance biomaterials that are amenable to biofabrication, maintain mechanical integrity, support specific cell behaviours, and, ultimately, biodegrade. In most cases, complex tissues will need to be fabricated from not one, but many biomaterials, which collectively fulfill these demanding requirements. Gellan gum is an anionic polysaccharide with potential to fill several key roles in engineered tissues, particularly after modification and blending. This review focuses on the present state of research into gellan gum, from its origins, purification and modification, through processing and biofabrication options, to its performance as a cell scaffold for both soft tissue and load bearing applications. Overall, we find gellan gum to be a highly versatile backbone material for tissue engineering research, upon which a broad array of form and functionality can be built.

Highly Concentrated Alginate-Gellan Gum Composites for 3D Plotting of Complex Tissue Engineering Scaffolds

In tissue engineering, additive manufacturing (AM) technologies have brought considerable progress as they allow the fabrication of three-dimensional (3D) structures with defined architecture. 3D plotting is a versatile, extrusion-based AM technology suitable for processing a wide range of biomaterials including hydrogels. In this study, composites of highly concentrated alginate and gellan gum were prepared in order to combine the excellent printing properties of alginate with the favorable gelling characteristics of gellan gum. Mixtures of 16.7 wt % alginate and 2 or 3 wt % gellan gum were found applicable for 3D plotting. Characterization of the resulting composite scaffolds revealed an increased stiffness in the wet state (15%⁻20% higher Young's modulus) and significantly lower volume swelling in cell culture medium compared to pure alginate scaffolds (~10% vs. ~23%). Cytocompatibility experiments with human mesenchymal stem cells (hMSC) revealed that cell attachment was improved-the seeding efficiency was ~2.5⁻3.5 times higher on the composites than on pure alginate. Additionally, the composites were shown to support hMSC proliferation and early osteogenic differentiation. In conclusion, print fidelity of highly concentrated alginate-gellan gum composites was comparable to those of pure alginate; after plotting and crosslinking, the scaffolds possessed improved qualities regarding shape fidelity, mechanical strength, and initial cell attachment making them attractive for tissue engineering applications.