Perfusion bioreactor culture of human adipose‐derived stromal cells on decellularized adipose tissue scaffolds enhances in vivo adipose tissue regeneration

Application of Stem Cells Shows Antiinflammatory Effect in an Irradiated Random Pattern Flap Model

BACKGROUND

In reconstructive surgery, local flaps might develop tissue necrosis or partial flap loss especially after previous irradiation, which may be necessary in many tumor entities. The application of stem cells seems promising to improve flap perfusion and might be a possible solution to optimize flap survival.

METHODS

Twenty rats received harvesting of bilateral random pattern fasciocutaneous flaps. The right flaps received 20 Gy ionizing radiation 4 weeks prior to the surgery, while the left flaps served as the non-irradiated control. After flap harvest, four different stem cell mixtures (5 × 106 ASC, ASC-HUVEC, MSC, MSC-HUVEC) were applied under both right and left flaps using 1 mL fibrin glue as the delivery vehicle. Flap size and its necrotic area were examined clinically. Two weeks after the surgery, HE staining and immunohistochemical staining for CD68 and ERG, as well as PCR analysis (Interleukin 6, HIF-1α and VEGF), were performed.

RESULTS

Application of ASCs, ASCs-HUVECs and MSCs resulted in a lower number of CD68-stained cells compared to the no cell group. The expression of Hif1α was higher in the ASC group compared to those in the MSC and previously treated no cell groups. Treatment with MSCs and MSCs-HUVECs prevented shrinking of the flaps in this series.

CONCLUSION

Application of ASCs, MSCs and ASCs-HUVECs was shown to have an antiinflammatory effect. Treatment with MSCs and MSCs-HUVECs can prevent early shrinking of the flaps.

Strategies for Constructing Tissue-Engineered Fat for Soft Tissue Regeneration

BACKGROUND

Repairing soft tissue defects caused by inflammation, tumors, and trauma remains a major challenge for surgeons. Adipose tissue engineering (ATE) provides a promising way to solve this problem.

METHODS

This review summarizes the current ATE strategies for soft tissue reconstruction, and introduces potential construction methods for ATE.

RESULTS

Scaffold-based and scaffold-free strategies are the two main approaches in ATE. Although several of these methods have been effective clinically, both scaffold-based and scaffold-free strategies have limitations. The third strategy is a synergistic tissue engineering strategy and combines the advantages of scaffold-based and scaffold-free strategies.

CONCLUSION

Personalized construction, stable survival of reconstructed tissues and functional recovery of organs are future goals of building tissue-engineered fat for ATE.

Combined Use of Autologous Sustained-Release Scaffold of Adipokines and Acellular Adipose Matrix to Construct Vascularized Adipose Tissue

BACKGROUND

Adipose tissue engineering plays a key role in the reconstruction of soft-tissue defects. The acellular adipose matrix (AAM) is a promising biomaterial for the construction of engineered adipose tissue. However, AAM lacks sufficient adipoinduction potency because of the abundant loss of matrix-bound adipokines during decellularization.

METHODS

An adipose-derived extracellular matrix collagen scaffold, "adipose collagen fragment" (ACF), was prepared using a novel mechanical method that provides sustained release of adipokines. Here, the authors used label-free proteomics methods to detect the protein components in AAM and ACF. In vivo, ACF was incorporated into AAM or acellular dermal matrix and implanted into nude mice to evaluate adipogenesis. Neoadipocytes, neovessels, and corresponding gene expression were evaluated. The effects of ACF on adipogenic differentiation of human adipose-derived stem cells and tube formation by human umbilical vein endothelial cells were tested in vitro.

RESULTS

Proteomics analysis showed that ACF contains diverse adipogenic and angiogenic proteins. ACF can release diverse adipokines and induce highly vascularized, mature adipose tissue in AAM, and even in nonadipogenic acellular dermal matrix. Higher expression of adipogenic markers peroxisome proliferator-activated receptor gamma and CCAAT/enhancer-binding protein alpha and greater numbers of tubule structures were observed in ACF-treated groups in vitro.

CONCLUSION

The combination of ACF and AAM could serve as a novel and promising strategy to construct mature, vascularized adipose tissue for soft-tissue reconstruction.

CLINICAL RELEVANCE STATEMENT

The combined use of AAM and ACF has been proven to induce a highly vascularized, mature, engineered adipose tissue in the nude mouse model, which may serve as a promising strategy for soft-tissue reconstruction.

Combining Allograft Adipose and Fascia Matrix as an Off-the-Shelf Scaffold for Adipose Tissue Engineering Stimulates Angiogenic Responses and Activates a Proregenerative Macrophage Profile in a Rodent Model

OBJECTIVE

Bioscaffolds for treating soft tissue defects have limitations. As a bioscaffold, allograft adipose matrix (AAM) is a promising approach to treat soft tissue defects. Previously, we revealed that combining superficial adipose fascia matrix with AAM, components of the hypodermis layer of adipose tissue, improved volume retention, adipogenesis, and angiogenesis in rats 8 weeks after it was implanted compared with AAM alone. Here, we modified the fascia matrix and AAM preparation, examined the tissue over 18 weeks, and conducted a deeper molecular investigation. We hypothesized that the combined matrices created a better scaffold by triggering angiogenesis and proregenerative signals.

METHODS

Human AAM and fascia matrix were implanted (4 [1 mL] implants/animal) into the dorsum of male Fischer rats (6-8 weeks old; ~140 g) randomly as follows: AAM, fascia, 75/25 (AAM/fascia), 50/50, and 50/50 + hyaluronic acid (HA; to improve extrudability) (n = 4/group/time point). After 72 hours, as well as 1, 3, 6, 9, 12, and 18 weeks, graft retention was assessed by a gas pycnometer. Adipogenesis (HE), angiogenesis (CD31), and macrophage infiltration (CD80 and CD163) were evaluated histologically at all time points. The adipose area and M1/M2 macrophage ratio were determined using ImageJ. RNA sequencing (RNA-seq) and bioinformatics were conducted to evaluate pathway enrichments.

RESULTS

By 18 weeks, the adipose area was 2365% greater for 50/50 HA (281.6 ± 21.6) than AAM (11.4 ± 0.9) (P < 0.001). The M1/M2 macrophage ratio was significantly lower for 50/50 HA (0.8 ± 0.1) than AAM (0.9 ± 0.1) at 6 weeks (16%; P < 0.05). This inversely correlated with adipose area (r = -0.6; P > 0.05). The RNA-seq data revealed that upregulated adipogenesis, angiogenesis, and macrophage-induced tissue regeneration genes were temporally different between the groups.

CONCLUSIONS

Combining the fascia matrix with AAM creates a bioscaffold with an improved retention volume that supports M2 macrophage-mediated angiogenesis and adipogenesis. This bioscaffold is worthy of further investigation.

Biofabrication of vascularized adipose tissues and their biomedical applications

Recent advances in adipose tissue engineering and cell biology have led to the development of innovative therapeutic strategies in regenerative medicine for adipose tissue reconstruction. To date, the many in vitro and in vivo models developed for vascularized adipose tissue engineering cover a wide range of research areas, including studies with cells of various origins and types, polymeric scaffolds of natural and synthetic derivation, models presented using decellularized tissues, and scaffold-free approaches. In this review, studies on adipose tissue types with different functions, characteristics and body locations have been summarized with 3D in vitro fabrication approaches. The reason for the particular focus on vascularized adipose tissue models is that current liposuction and fat transplantation methods are unsuitable for adipose tissue reconstruction as the lack of blood vessels results in inadequate nutrient and oxygen delivery, leading to necrosis in situ. In the first part of this paper, current studies and applications of white and brown adipose tissues are presented according to the polymeric materials used, focusing on the studies which could show vasculature in vitro and after in vivo implantation, and then the research on adipose tissue fabrication and applications are explained.

Construction of Rapid Extracellular Matrix-Deposited Small-Diameter Vascular Grafts Induced by Hypoxia in a Bioreactor

Cardiovascular disease has become one of the most globally prevalent diseases, and autologous or vascular graft transplantation has been the main treatment for the end stage of the disease. However, there are no commercialized small-diameter vascular graft (SDVG) products available. The design of SDVGs is promising in the future, and SDVG preparation using an in vitro bioreactor is a favorable method, but it faces the problem of long-term culture of >8 weeks. Herein, we used different oxygen (O₂) concentrations and mechanical stimulation to induce greater secretion of extracellular matrix (ECM) from cells in vitro to rapidly prepare SDVGs. Culturing with 2% O₂ significantly increased the production of the ECM components and growth factors of human dermal fibroblasts (hDFs). To accelerate the formation of ECM, hDFs were seeded on a polycaprolactone (PCL) scaffold and cultured in a flow culture bioreactor with 2% O₂ for only 3 weeks. After orthotopic transplantation in rat abdominal aorta, the cultured SDVGs (PCL-decellularized ECM) showed excellent endothelialization and smooth muscle regeneration. The vascular grafts cultured with hypoxia and mechanical stimulation could accelerate the reconstruction speed and obtain an improved therapeutic effect and thereby provide a new research direction for improving the production and supply of SDVGs.

Construction of adipose tissue using a silica expander capsule and cell sheet-assembled of decellularized adipose tissue

Delayed neovascularization and unstable adipose formation are major confounding factors in adipose tissue engineering. A system using decellularized adipose tissue (DAT), adipose-derived stem cells (ADSCs), and human umbilical vein endothelial cells (HUVECs) has been preliminarily studied, but it requires optimization, as adipogenic and angiogenic capabilities for maintaining a stable construct shape are limited. The current study aimed to address these limitations. Our initial modification involved the addition of exogenous chemokine (C-C motif) ligand 2 (CCL2), which resulted in enhanced adipogenesis and angiogenesis. However, further improvement was required due to delayed blood recanalization. To further optimize the system, a vascularized fibrous capsule derived from an implanted silica expander was utilized as a second modification. We hypothesized this would function as both a microbioreactor to fix the seed cells and exogenous CCL2 locally and as a vascular bed to promote neovascularization. Compared with that of the CCL2 loaded ADSC-HUVECs cell sheet assembled DAT system, adding the silica expander capsule resulted in significantly increased construct stability, new vessel intensity, a greater number of Oil Red O-positive lipid droplets, more enhanced tissue remodeling, and upregulated peroxisome proliferator-activated receptor gamma (PPARγ) & leptin expression. Thus, these two modifications helped optimize the currently available ADSC-HUVEC cell sheet assembled DAT system, providing an adipose tissue construction strategy with enhanced adipogenesis and angiogenesis to reconstruct soft tissue defects. Moreover, close-to-normal leptin expression provided the engineered adipose tissue with a glucometabolic function, in addition to remodeling capabilities. STATEMENT OF SIGNIFICANCE: Delayed neovascularization and unstable adipose formation are the two major problems in tissue engineering adipose. Here, we introduced an adipose tissue engineering construction strategy using a silica expander capsule along with hADSCs-HUVECs cell sheet-assembled DAT in a CCL2-rich microenvironment. Our data suggested that CCL2 could improve angiogenesis and adipogenesis in vitro and in vivo. The addition of tissue expander capsule could further improve the stability of construction and fabricated adipose tissue with increased new vessel intensity, greater numbers of Oil Red O-positive lipid droplets, more enhanced tissue remodeling, and upregulated leptin expression. CCL2 and expander capsule can have clinical utility for soft tissue defects repair, and these two factors can be useful in other tissue engineering.

Decellularization for the retention of tissue niches

Decellularization of natural tissues to produce extracellular matrix is a promising method for three-dimensional scaffolding and for understanding microenvironment of the tissue of interest. Due to the lack of a universal standard protocol for tissue decellularization, recent investigations seek to develop novel methods for whole or partial organ decellularization capable of supporting cell differentiation and implantation towards appropriate tissue regeneration. This review provides a comprehensive and updated perspective on the most recent advances in decellularization strategies for a variety of organs and tissues, highlighting techniques of chemical, physical, biological, enzymatic, or combinative-based methods to remove cellular contents from tissues. In addition, the review presents modernized approaches for improving standard decellularization protocols for numerous organ types.

Recellularization of Native Tissue Derived Acellular Scaffolds with Mesenchymal Stem Cells

The functionalization of decellularized scaffolds is still challenging because of the recellularization-related limitations, including the finding of the most optimal kind of cell(s) and the best way to control their distribution within the scaffolds to generate native mimicking tissues. That is why researchers have been encouraged to study stem cells, in particular, mesenchymal stem cells (MSCs), as alternative cells to repopulate and functionalize the scaffolds properly. MSCs could be obtained from various sources and have therapeutic effects on a wide range of inflammatory/degenerative diseases. Therefore, in this mini-review, we will discuss the benefits using of MSCs for recellularization, the factors affecting their efficiency, and the drawbacks that may need to be overcome to generate bioengineered transplantable organs.

Modular cell-assembled adipose matrix-derived bead foams as a mesenchymal stromal cell delivery platform for soft tissue regeneration

With the goal of establishing a new clinically-relevant bioscaffold format to enable the delivery of high densities of human adipose-derived stromal cells (ASCs) for applications in soft tissue regeneration, a novel "cell-assembly" method was developed to generate robust 3-D scaffolds comprised of fused networks of decellularized adipose tissue (DAT)-derived beads. In vitro studies confirmed that the assembly process was mediated by remodelling of the extracellular matrix by the seeded ASCs, which were well distributed throughout the scaffolds and remained highly viable after 8 days in culture. The ASC density, sulphated glycosaminoglycan content and scaffold stability were enhanced under culture conditions that included growth factor preconditioning. In vivo testing was performed to compare ASCs delivered within the cell-assembled DAT bead foams to an equivalent number of ASCs delivered on a previously-established pre-assembled DAT bead foam platform in a subcutaneous implant model in athymic nude mice. Scaffolds were fabricated with human ASCs engineered to stably co-express firefly luciferase and tdTomato to enable long-term cell tracking. Longitudinal bioluminescence imaging showed a significantly stronger signal associated with viable human ASCs at timepoints up to 7 days in the cell-assembled scaffolds, although both implant groups were found to retain similar densities of human ASCs at 28 days. Notably, the infiltration of CD31⁺ murine endothelial cells was enhanced in the cell-assembled implants at 28 days. Moreover, microcomputed tomography angiography revealed that there was a marked reduction in vascular permeability in the cell-assembled group, indicating that the developing vascular network was more stable in the new scaffold format. Overall, the novel cell-assembled DAT bead foams represent a promising platform to harness the pro-regenerative paracrine functionality of human ASCs and warrant further investigation as a clinically-translational approach for volume augmentation.

Optimized Method to Improve Cell Activity in 3D Scaffolds Under a Dual Real-Time Dynamic Bioreactor System

Bioreactor systems that allow the simulation of in vivo variables in a controlled in vitro environment, were a great advance in the field of tissue engineering. Due to the dynamic-mechanical features that some tissues present, 3D-engineered constructs often do not exhibit the biomechanical properties of these native tissues. Thus, a successful approach must not only achieve tissue repair but also restore its function after injury. Here, we describe a method to improve cell activity in 3D scaffolds in a dynamic bioreactor system through the application of mechanical compression and fluid flow for tissue engineering approaches.

Overcoming functional challenges in autologous and engineered fat grafting trends

Autologous fat grafting offers significant promise for the repair of soft tissue deformities; however, high resorption rates indicate that engineered solutions are required to improve adipose tissue (AT) survival. Advances in material development and biofabrication have laid the foundation for the generation of functional AT constructs; however, a balance needs to be struck between clinically feasible delivery and improved structural integrity of the grafts. A new approach combining the objectives from both the clinical and research communities will assist in developing morphologically and genetically mature AT constructs, with controlled spatial arrangement and increased potential for neovascularization. In a rapidly progressing field, this review addresses research in both the preclinical and bioengineering domains and assesses their ability to resolve functional challenges.

Preconditioning Human Adipose-Derived Stromal Cells on Decellularized Adipose Tissue Scaffolds Within a Perfusion Bioreactor Modulates Cell Phenotype and Promotes a Pro-regenerative Host Response

Cell-based therapies involving the delivery of adipose-derived stromal cells (ASCs) on decellularized adipose tissue (DAT) scaffolds are a promising approach for soft tissue augmentation and reconstruction. Our lab has recently shown that culturing human ASCs on DAT scaffolds within a perfusion bioreactor prior to implantation can enhance their capacity to stimulate in vivo adipose tissue regeneration. Building from this previous work, the current study investigated the effects of bioreactor preconditioning on the ASC phenotype and secretory profile in vitro, as well as host cell recruitment following implantation in an athymic nude mouse model. Immunohistochemical analyses indicated that culturing within the bioreactor increased the percentage of ASCs co-expressing inducible nitric oxide synthase (iNOS) and arginase-1 (Arg-1), as well as tumor necrosis factor-alpha (TNF-α) and interleukin-10 (IL-10), within the peripheral regions of the DAT relative to statically cultured controls. In addition, bioreactor culture altered the expression levels of a range of immunomodulatory factors in the ASC-seeded DAT. In vivo testing revealed that culturing the ASCs on the DAT within the perfusion bioreactor prior to implantation enhanced the infiltration of host CD31⁺ endothelial cells and CD26⁺ cells into the DAT implants, but did not alter CD45⁺F4/80⁺CD68⁺ macrophage recruitment. However, a higher fraction of the CD45⁺ cell population expressed the pro-regenerative macrophage marker CD163 in the bioreactor group, which may have contributed to enhanced remodeling of the scaffolds into host-derived adipose tissue. Overall, the findings support that bioreactor preconditioning can augment the capacity of human ASCs to stimulate regeneration through paracrine-mediated mechanisms.