Challenge for the detection of microplastics in the environment

Detection of microplastics in zebrafish housing systems: Can microplastic background contamination affect the final results of microplastic-related toxicological tests?

Concentrations of microplastics (MPs) were determined in three commonly used zebrafish housing systems to see if their levels could affect the final results of laboratory microplastic-related toxicology tests. MPs have received notable attention in the last few years, and their toxicology tests have also come to the fore. Zebrafish (Danio rerio), kept in fish housing systems, are widely used as models for MPs studies. Most of these systems contain a significant number of parts made of different polymers. As usage and amortization can erode these parts, MPs might appear in the keeping water or the fish body, which may represent a background load and possibly influence the results of microplastic-related toxicological tests. To take representative water samples from systems, two in-situ filtration techniques, a newly developed peristaltic pump-, and a jet pump-driven method were applied. The collected MP particles were analyzed with a Fourier-transform infrared microscope (detection limit 50 μm), and their possible origin was also investigated. The newly developed technique was more sufficient for sampling as it had a higher MPs recovery, especially in the smaller size range. Polyester, polyethylene and polypropylene were the most frequently detected polymers in the examined fish housing systems, the highest detected concentration was 0.31±0.12 particles/liter (0.22±0.16 μg/liter). These values are negligible compared to the literature data reporting enormously high applied MPs concentrations (104 - 2.21 × 108 particles/liter) during toxicology tests. The results also show that some detected MPs did not originate from the systems, their origin was presumed to be external.

Surface enhanced raman spectroscopy based sensitive and onsite detection of microplastics in water utilizing silver nanoparticles and nanodendrites

Plastics, of the order of microns in size, being not visible to the naked eye, are one of the significant contributors to pollution in the environment. Thus, the detection of micron-sized plastics (microplastics (MPs)) is crucial because of its hazardous toxic effects on our surroundings. In this work, we have proposed a quick and on-site detection of MPs, such as, polyvinyl chloride (PVC), polyvinyl alcohol (PVA) and polystyrene (PS) at ultra trace level using surface-enhanced Raman spectroscopy (SERS). To detect and analyse the spectra, two different nanostructures, such as, spherical shaped Ag nanoparticles (NPs), and shape anisotropic Ag nano-dendrites (NDs) were utilised to acquire the SERS spectra. A comprehensive analysis was further performed to check and investigate the amount of enhancements due to the mentioned nanostructures. We observed the Ag NDs exhibited amplified signal intensity compared to the Ag NPs due to the shape anisotropy leading to the surface charge confinement effect to create highly dense hotspots. However, the spherical shaped polystyrene beads of micron size exhibited better enhancement in Raman signal intensity when mixed with Ag NPs due to increased surface adsorption with the NPs. Therefore, the comparative study emphasizes the ability of using solution-based nanostructure as SERS for the onsite detection of microplastics having diverge size range at low concentration.

Analytical methods, source, concentration, and human risks of microplastics: a review

Microplastics (MPs) as an atmospheric pollutant are currently receiving widespread attention. Although atmospheric MPs have been extensively studied, due to different research methods, systematic comparisons of atmospheric MPs are still needed. This review critically reviewed the analytical methods, research status and potential human exposure. In this review, the detection principles, advantages and limitations of different visual and chemical analysis methods are reported, and the potential risks of MPs to the human are also introduced. Based on future research about the human risks, emphasized the importance of establishing standardized research methods.

Toy building bricks as a potential source of microplastics and nanoplastics

Microplastics and nanoplastics have become noteworthy contaminants, affecting not only outdoor ecosystems but also making a notable impact within indoor environments. The release of microplastics and nanoplastics from commonly used plastic items remains a concern, and the characterisation of these contaminants is still challenging. This study focused on evaluating the microplastics and nanoplastics produced from plastic building bricks. Using Raman spectroscopy and correlation analysis, the plastic material used to manufacture building blocks was determined to be either acrylonitrile butadiene styrene (correlation value of 0.77) or polycarbonate (correlation value of 0.96). A principal component analysis (PCA) algorithm was optimised for improved detection of the debris particles released. Some challenges in microplastic analysis, such as the interference from the colourants in the building block materials, was explored and discussed. Combining Raman results with scanning electron microscopy - energy-dispersive X-ray spectroscopy, we found the scratches on the building blocks to be a significant source of contamination, estimated several thousand microplastics and several hundred thousand nanoplastics were generated per mm2 following simulated play activities. The potential exposure to microplastics and nanoplastics during play poses risks associated with the ingestion and inhalation of these minute plastic particles.

Microplastics and Oxidative Stress-Current Problems and Prospects

Microplastics (MPs) are plastic particles between 0.1 and 5000 µm in size that have attracted considerable attention from the scientific community and the general public, as they threaten the environment. Microplastics contribute to various harmful effects, including lipid peroxidation, DNA damage, activation of mitogen-activated protein kinase pathways, cell membrane breakages, mitochondrial dysfunction, lysosomal defects, inflammation, and apoptosis. They affect cells, tissues, organs, and overall health, potentially contributing to conditions like cancer and cardiovascular disease. They pose a significant danger due to their widespread occurrence in food. In recent years, information has emerged indicating that MPs can cause oxidative stress (OS), a known factor in accelerating the aging of organisms. This comprehensive evaluation exposed notable variability in the reported connection between MPs and OS. This work aims to provide a critical review of whether the harmfulness of plastic particles that constitute environmental contaminants may result from OS through a comprehensive analysis of recent research and existing scientific literature, as well as an assessment of the characteristics of MPs causing OS. Additionally, the article covers the analytical methodology used in this field. The conclusions of this review point to the necessity for further research into the effects of MPs on OS.

Assessing the current state of plastic pollution research in Antarctica: Knowledge gaps and recommendations

Antarctica stands as one of the most isolated and pristine regions on our planet. Regardless, recent studies have evidenced the presence of plastic pollution in Antarctic environments and biota. While these findings are alarming and put into perspective the reach of plastic pollution, it is necessary to assess the current knowledge of plastic pollution in Antarctica. In the present review, an updated literature review of plastic pollution in multiple Antarctic environmental compartments and biota was conducted. Studies were cataloged based on environmental compartments (e.g., sediments, seawater, soil, atmosphere) and biota from different ecological niches. A detailed analysis of the main findings, as well as the flaws and shortcomings across studies, was conducted. In general terms, several studies have shown a lack of adequate sampling and analytical procedures for plastic research (particularly in the case of microplastics) and standard procedures; thus, compromising the reliability of the data reported and comparability across studies. Aiming to guide future studies and highlight research needs, a list of knowledge gaps and recommendations were provided based on the analysis and discussion of the literature and following standardized procedures.

Sea surface microplastics in the Galapagos: Grab samples reveal high concentrations of particles <200 μm in size

Plastic pollution in the oceans is increasing, yet most global sea surface data is collected using plankton nets which limits our knowledge of the smaller and more bioaccessible size fraction of microplastics (<5 mm). We sampled the biodiverse coastal waters of the Galapagos Island of San Cristobal, comparing two different microplastic sampling methodologies; 1 l whole seawater grab samples filtered to 1.2 μm and sea surface plankton tows with a net mesh size of 200 μm. Our data reveal high concentrations of microplastics in Galapagos coastal waters surrounding the urban area, averaging 11.5 ± 1.48 particles l-1, with a four-order of magnitude increase in microplastic abundance observed using grab sampling compared with 200 μm plankton nets. This increase was greater when including anthropogenic cellulose particles, averaging 19.8 ± 1.86 particles l-1. Microplastic and anthropogenic cellulose particles smaller than 200 μm comprised 44 % of the particles from grab samples, suggesting previous estimates of microplastic pollution based on plankton nets likely miss and therefore underestimate these smaller particles. The particle characteristics and distribution of these smaller particles points strongly to a local input of cellulosic fibres in addition to the microplastic particles transported longer distances via the Humbolt current found across the surface seawater of the Galapagos. Improving our understanding of particle characteristics and distributions to highlight likely local sources will facilitate the development of local mitigation and management plans to reduce the input and impacts of microplastics to marine species, not just in the Galapagos but globally.

The quantification of the airborne plastic particles of 0.43-11 μm: Procedure development and application to atmospheric environment

The environmental degradation of microplastics results in ultrafine particles that may incur severe biological concerns. Despite this, the atmospheric existence of plastics of less than a few microns has barely been investigated due to the particle size limit of conventional analytical methods. This study develops a procedure to quantify and characterize plastic particles (including nanoplastics; less than 1 μm) in the air through fractional sampling, a simple pretreatment method, and pyrolysis-gas chromatography-mass spectrometry (pyr-GC/MS). We targeted 11 major polymers, namely, polyethylene, polypropylene, polystyrene, acrylonitrile-butadiene-styrene resin, styrene-butadiene rubber, polymethylmethacrylate, polycarbonate, polyvinyl chloride, polyethylene terephthalate (PET), polyamide 6, and polyamide 66 (PA66). The average spike and recovery rate of each polymer in the aerosol collected on the roof of a four-story building near a major road in Kyoto, Japan, amounted to 78-130%, with a coefficient of variation of less than 15%. By coupling pyr-GC/MS analysis with fractional sampling of particles within the size range of >11 μm, 11-7.0 μm, 7.0-4.7 μm, 4.7-3.3 μm, 3.3-2.1 μm, 2.1-1.1 μm, 1.1-0.65 μm, 0.65-0.43 μm, it was possible to quantify airborne nano- and microplastics by particle size. Polyethylene, polystyrene, PET, and PA66 were detected in the air, and the total mass concentration of tiny plastic particles (0.43-11 μm) amounted to 1.20 μg/m3. This translates into total particle numbers of 3.05 × 106 particles/m3 (assuming spheres), revealing a substantial number of particles under 1 μm. These results will contribute to future studies to understand the atmospheric behaviors of ultrafine plastic particles and their flow-on effects on the respiratory system.

Labelling of micro- and nanoplastics for environmental studies: state-of-the-art and future challenges

Studying microplastics and nanoplastics (MNP) in environmental matrices is extremely challenging, and recent developments in labelling techniques may hold much promise to further our knowledge in this field. Here, we reviewed MNP labelling techniques and applications to provide the first systematic and in-depth insight into MNP labelling. We classified all labelling techniques for MNP into four main types (fluorescent, metal, stable isotope and radioisotope) and discussed per type the synthesis methods, detection methods, influencing factors, and the current and future applications and challenges. Direct labelling of environmental MNP with fluorescent dyes and metals enables simple visualisation and selective detection of MNP to improve detection efficiency. However, it is still an open question how to avoid co-labelling of non-plastic (i.e. non-target, matrix) materials. Labelling of MNP that are intentionally added in the environment may allow semi-automatic detection of MNP particles with high accuracy and sensitivity during studies on e.g. transport and degradation. The detection limit of labelled MNP largely depends on particle size and the type of matrix. Fluorescent labelling allows efficient detection of microplastics, whereas metal labelling is preferred for nanoplastics research due to a potentially higher sensitivity. A major challenge for fluorescent and metal labelling is to develop techniques that do not alter the inherent MNP properties or only do so minimally, in particular the surface properties. Stable and radioactive isotope labelling (13C and 14C, but also 15N, 2H) of the polymer itself allows to preserve inherent MNP properties, but have been largely ignored. Overall, labelling of MNP holds great promise for advancing our fundamental understanding of the behaviour of plastics, notably the smallest fractions, in the environment.

Uptake and transport of micro/nanoplastics in terrestrial plants: Detection, mechanisms, and influencing factors

The pervasive dispersion of micro/nanoplastics in various environmental matrices has raised concerns regarding their potential intrusion into terrestrial ecosystems and, notably, plants. In this comprehensive review, we focus on the interaction between these minute plastic particles and plants. We delve into the current methodologies available for detecting micro/nanoplastics in plant tissues, assess the accumulation and distribution of these particles within roots, stems, and leaves, and elucidate the specific uptake and transport mechanisms, including endocytosis, apoplastic transport, crack-entry mode, and stomatal entry. Moreover, uptake and transport of micro/nanoplastics are complex processes influenced by multiple factors, including particle size, surface charge, mechanical properties, and physiological characteristics of plants, as well as external environmental conditions. In conclusion, this review paper provided valuable insights into the current understanding of these mechanisms, highlighting the complexity of the processes and the multitude of factors that can influence them. Further research in this area is warranted to fully comprehend the fate of micro/nanoplastics in plants and their implications for environmental sustainability.

A review of microplastic threat mitigation in Asian lentic environments

Microplastic (MP) pollution has evolved into a significant worldwide environmental concern due to its widespread sources, enduring presence, and adverse effects on lentic ecosystems and human well-being. The growing awareness of the hidden threat posed by MPs in lentic ecosystems has emphasized the need for more in-depth research. Unlike marine environments, there remain unanswered questions about MP hotspots, ecotoxic effects, transport mechanisms, and fragmentation in lentic ecosystems. The introduction of MPs represents a novel threat to long-term environmental health, posing unresolved challenges for sustainable management. While MP pollution in lentic ecosystems has garnered global attention due to its ecotoxicity, our understanding of MP hotspots in lakes from an Asian perspective remains limited. Hence, the aim of this review is to provide a comprehensive analysis of MP hotspots, morphological attributes, ecotoxic impacts, sustainable solutions, and future challenges across Asia. The review summarizes the methods employed in previous studies and the techniques for sampling and analyzing microplastics in lake water and sediment. Notably, most studies concerning lake microplastics tend to follow the order of China > India > Pakistan > Nepal > Turkey > Bangladesh. Additionally, this review critically addresses the analysis of microplastics in lake water and sediment, shedding light on the prevalent net-based sampling methods. Ultimately, this study emphasizes the existing research gaps and suggests new research directions, taking into account recent advancements in the study of microplastics in lentic environments. In conclusion, the review advocates for sustainable interventions to mitigate MP pollution in the future, highlighting the presence of MPs in Asian lakes, water, and sediment, and their potential ecotoxicological repercussions on both the environment and human health.

Research progress on the cellular toxicity caused by microplastics and nanoplastics

Microplastics (MPs) are plastic particles of a diameter of less than 5 mm and a major carrier of pollution. In accordance with its diameter range, MPs can be divided into microplastics (100-5 mm) and nanoplastics (<100 nm). In recent years, in addition to the impact of MPs on the environment, the ways in which MPs affect the body has also attracted continuous attention. However, relevant studies on the cytotoxicity of MPs are not comprehensive. Based on the current research, this paper summarizes four main cytotoxic mechanisms of MPs, inducing oxidative stress, damaging cell membrane organelles, inducing immune response, and genotoxicity. Generally, MPs cause cytotoxicity such as oxidative stress, damage to cell membranes and organelles, activation of immune responses, and genotoxicity through mechanical damage or induction of cells to produce reactive oxygen species. Understanding these toxic mechanisms is helpful for the evaluation and prevention of human toxicity of MPs. This paper also analyzes the limitations of current research and prospects for future research into cellular MPs, with the aim of providing a scientific basis and reference for further research into the toxic mechanism of MPs.

Micro(nano)plastics in commercial foods: A review of their characterization and potential hazards to human health

Micro (nano)plastics (MNPs) are pollutants of worldwide concern for their ubiquitous environmental presence and associated impacts. The higher consumption of MNPs contaminated commercial food can cause potential adverse human health effects. This review highlights the evidence of MNPs in commercial food items and summarizes different sampling, extraction, and digestion techniques for the isolation of MNPs, such as oxidizing digestion, enzymatic digestion, alkaline digestion and acidic digestion. Various methods for the characterization and quantification of microplastics (MPs) are also compared, including μ-Raman spectroscopy, μ-Fourier transform infrared spectroscopy (FTIR), thermal analysis and Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). Finally, we share our concerns about the risks of MNPs to human health through the consumption of commercial seafood. The knowledge of the potential human health impacts at a subcellular or molecular level of consuming mariculture products contaminated with MNPs is still limited. Moreover, MNPs are somewhat limited, hard to measure, and still contentious. Due to the nutritional significance of fish consumption, the risk of exposure to MNPs and the associated health effects are of the utmost importance.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

Quantification of microplastic by particle size down to 1.1 μm in surface road dust in an urban city, Japan

The impact of microplastics (MPs, plastic particles ≤5 mm) on ecosystems is of great concern. Road surfaces represent a significant source of MPs where plastic fragments are physically and chemically reduced to MPs. However, the literature lacks information on fragmentation tendencies below 11 μm. This study aimed to characterize the occurrence of MPs in road dust in different size fractions down to 1.1 μm. Road dust was collected at five sites near a major road in Kusatsu city, Japan, and partitioned by size into 13 fractions (1.1-850 μm). The coarser fractions accounted for a greater proportion of the dust. The percentage of organic matter, determined by loss on ignition, increased as the fractions became finer. Pyrolysis-gas chromatography-mass spectrometry was used to quantify 12 types of polymers in each fraction. The dust was found to contain nine types of MP, namely, polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), polystyrene (PS), styrene/butadiene rubber (SBR), acrylonitrile/butadiene/styrene resin (ABS), polycarbonate (PC), polymethylmethacrylate (PMMA), and polyamide 66 (PA66). The total MP concentration in road dust particles by particle size fraction (concentrationf) began to increase from the 125-250 μm fraction and remained elevated in finer fractions down to 1.1 μm, indicating that MPs in the road dust micronized to at least 1.1 μm. However, for individual polymer types, the tendency for concentrationf to increase or decrease with particle size fraction varied: the concentrationf of some polymers, such as PE and PVC, remained elevated in fractions down to 1.1 μm; the concentrationf of SBR, a rubber-MP, showed a stable or decreasing trend in fractions of 7.0-11 μm and finer. Particles of PE, PVC, and some other plastics might become increasingly finer, even down to 1.1 μm. Further research is needed to understand the comminution limits of these polymers under pertinent environmental conditions.

Radiolabeling of Micro-/Nanoplastics via In-Diffusion

Micro- and nanoplastics are emerging pollutants with a concerning persistence in the environment. Research into their environmental impact requires addressing challenges related to sensitively and selectively detecting them in complex ecological media. One solution with great potential for alleviating these issues is using radiolabeling strategies. Here, we report the successful introduction of a 64Cu radiotracer into common microplastics, namely polyethylene, polyethylene terephthalate, polystyrene, polyamide, and polyvinylidene dichloride, which allows the sensitive detection of mere nanograms of substance. Utilizing a Hansen Solubility Parameter screening, we developed a swelling and in-diffusion process for tetraphenylporphyrin-complexed 64Cu, which permits one-pot labeling of polymer particles.

Occurrence of Microplastics in Most Consumed Fruits and Vegetables from Turkey and Public Risk Assessment for Consumers

Microplastics are transferred to humans through the food chain by consuming food contaminated with microplastics. However, the knowledge about the risks of dietary exposure for humans to these particles is very limited. Moreover, only a few studies on microplastic pollution in fruit and vegetables have been carried on. Thus, this study aims to investigate the presence of microplastics in some of the most consumed fruits and vegetables (pear (Pyrus communis), apple (Malus domestica), tomato (Solanum lycopersicum), onion (Allium cepa), potatoes (Solanum tuberosum), and cucumber (Cucumis sativus)) from Turkey and to evaluate the potential risk for consumers. Fruits and vegetable samples were purchased from different markets and fruiterer (two of each) in Muğla province, Southwest of Turkey. Microplastic extraction processes were carried out on the edible parts of the samples. According to the results obtained, a total of 210 particles (2.9 ± 1.6 particle g-1) were detected in all samples. Any significant difference occurred among the different markets. The maximum average amount of microplastic was determined in tomato samples (3.63 ± 1.39 particle g-1). The highest microplastic intake was with tomato (398,520 particles individual-1 year-1 for Estimated Annual Intake (EAI) and Estimated Daily Intake (EDI) for children 68.24 particles kg-1 day-1). The occurrence of microplastics of big size, that are not allowed to pass by plant xylem transport, suggests that fresh vegetables and fruits can be contaminated with plastic, especially during the production phase, during agricultural activities and during the marketing process (transport to the market and purchasing process).

Microplastic contamination in edible clams from popular recreational clam-digging sites in Hong Kong and implications for human health

The ubiquitous presence of microplastics in edible bivalves and the human health risks associated with bivalve consumption have raised public concerns. Farmed and market-sold bivalves have received the most attention, while wild bivalves have received much less scrutiny. In the present study, 249 individuals were examined across six wild clam species from two popular recreational clam-digging sites in Hong Kong. Of the clams, 56.6 % contained microplastics, with an average abundance of 1.04 items/g (wet weight) and 0.98 items/individual. This resulted in an estimated annual dietary exposure of 14,307 items per Hong Kong resident. Moreover, the potential microplastic risks for humans associated with wild clam consumption were assessed using the polymer hazard index, and the results indicated a medium degree of risk, indicating that exposure to microplastics through wild clam consumption is inevitable and poses a potential health threat to humans. Further research is needed to facilitate a better understanding of the widespread occurrence of microplastics in wild bivalves, and further refinements of the risk assessment framework can hopefully allow a more accurate and holistic health risk assessment for microplastics.

Recent analytical techniques, and potential eco-toxicological impacts of textile fibrous microplastics (FMPs) and associated contaminates: A review

Despite of our growing understanding of microplastic's implications, research on the effects of fibrous microplastic (FMPs) on the environment is still in its infancy. Some scientists have hypothesized the possibility of natural textile fibres, which may act as one of the emerging environmental pollutants prevalent among microplastic pollutants in the environment. Therefore, this review aims to critically evaluate the toxic effects of emerging FMPs, the presence, and sources of FMPs in the environment, identification and analytical techniques, and the potential impact or toxicity of the FMPs on the environment and human health. About175 publications (2011-2023) based on FMPs were identified and critically reviewed for transportation, analysis and ecotoxicological behaviours of FMPs in the environment. Textile industries, wastewater treatment plants, and household washing of clothes are significant sources of FMPs. In addition, various characterization techniques (e.g., FTIR, SEM, RAMAN, TGA, microscope, and X-Ray Fluorescence Spectroscopy) commonly used for the identification and analysis of FMPs are also discussed, which justifies the novelty aspects of this review. FMPs are pollutants of emerging concern due to their prevalence and persistence in the environment. FMPs are also found in the food chain, which is an alarming situation for living organisms, including effects on the nervous system, digestive system, circulatory system, and genetic alteration. This review will provide readers with a comparison of different analytical techniques, which will be helpful for researchers to select the appropriate analytical techniques for their study and enhance their knowledge about the harmful effects of FMPs.

Physicochemical characterization and quantification of nanoplastics: applicability, limitations and complementarity of batch and fractionation methods

A comprehensive physicochemical characterization of heterogeneous nanoplastic (NPL) samples remains an analytical challenge requiring a combination of orthogonal measurement techniques to improve the accuracy and robustness of the results. Here, batch methods, including dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), tunable resistive pulse sensing (TRPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM), as well as separation/fractionation methods such as centrifugal liquid sedimentation (CLS) and field-flow fractionation (FFF)-multi-angle light scattering (MALS) combined with pyrolysis gas chromatography mass spectrometry (pyGC-MS) or Raman microspectroscopy (RM) were evaluated for NPL size, shape, and chemical composition measurements and for quantification. A set of representative/test particles of different chemical natures, including (i) polydisperse polyethylene (PE), (ii) (doped) polystyrene (PS) NPLs, (iii) titanium dioxide, and (iv) iron oxide nanoparticles (spherical and elongated), was used to assess the applicability and limitations of the selected methodologies. Particle sizes and number-based concentrations obtained by orthogonal batch methods (DLS, NTA, TRPS) were comparable for monodisperse spherical samples, while higher deviations were observed for polydisperse, agglomerated samples and for non-spherical particles, especially for light scattering methods. CLS and TRPS offer further insight with increased size resolution, while detailed morphological information can be derived by electron microscopy (EM)-based approaches. Combined techniques such as FFF coupled to MALS and RM can provide complementary information on physical and chemical properties by online measurements, while pyGC-MS analysis of FFF fractions can be used for the identification of polymer particles (vs. inorganic particles) and for their offline (semi)quantification. However, NPL analysis in complex samples will continue to present a serious challenge for the evaluated techniques without significant improvements in sample preparation.

Microplastics in infant milk powder

Microplastics can be found almost everywhere and extensively expose to human. Infants are vulnerable, and the potential risks of microplastics may be greater for infants, however, infants' microplastic exposure is still poorly understood. Since milk powder makes up a significant portion of many infants' diets, we investigated microplastic pollution in infant milk powder and calculated the microplastic exposure from milk powder, feeding bottles and milk powder preparation. On one hand, we studied 13 different types of milk powder with different packaging, processing systems, and milk sources. The boxed milk powder (7 ± 3 items/100 g) was more polluted with microplastics than the canned milk powder (4 ± 3 items/100 g). The inner packaging of the boxed milk powder was plastic and aluminum foil laminated, it emitted 8 ± 2 to 17 ± 1 items/100 g of microplastics, and might be a main source of microplastics in boxed milk powder. On the other hand, we found that when infants consume milk powder, the microplastic exposure from milk powder itself is little, exposure from feeding bottles is 6.8 times higher than that from milk powder and milk powder preparation is 1.7 times higher.

Mechanism and characterization of microplastic aging process: A review

With the increasing production of petroleum-based plastics, the problem of environmental pollution caused by plastics has aroused widespread concern. Microplastics, which are formed by the fragmentation of macro plastics, are bio-accumulate easily due to their small size and slow degradation under natural conditions. The aging of plastics is an inevitable process for their degradation and enhancement of adsorption performance toward pollutants due to a series of changes in their physiochemical properties, which significantly increase the toxicity and harm of plastics. Therefore, studies should focus on the aging process of microplastics through reasonable characterization methods to promote the aging process and prevent white pollution. This review summarizes the latest progress in natural aging process and characterization methods to determine the natural aging mechanism of microplastics. In addition, recent advances in the artificial aging of microplastic pollutants are reviewed. The degradation status and by-products of biodegradable plastics in the natural environment and whether they can truly solve the plastic pollution problem have been discussed. Findings from the literature pointed out that the aging process of microplastics lacks professional and exclusive characterization methods, which include qualitative and quantitative analyses. To lessen the toxicity of microplastics in the environment, future research directions have been suggested based on existing problems in the current research. This review could provide a systematic reference for in-depth exploration of the aging mechanism and behavior of microplastics in natural and artificial systems.

Unaccounted Microplastics in the Outlet of Wastewater Treatment Plants—Challenges and Opportunities

Since the 1950s, plastic production has skyrocketed. Various environmental and human activities are leading to the formation and accumulation of microplastics (MPs) in aquatic and terrestrial ecosystems, causing detrimental effects on water, soil, plants, and living creatures. Wastewater treatment plants (WWTPs) are one of the primary MP management centers meant to check their entry into the natural systems. However, there are considerable limitations in effectively capturing, detecting, and characterizing these MPs in the inlet and outlet of WWTPs leading to “unaccounted MPs” that are eventually discharged into our ecosystems. In order to assess the holistic picture of the MPs’ distribution in the ecosystems, prevent the release of these omitted MPs into the environment, and formulate regulatory policies, it is vital to develop protocols that can be standardized across the globe to accurately detect and account for MPs in different sample types. This review will cover the details of current WWTP adoption procedures for MP management. Specifically, the following aspects are discussed: (i) several processes involved in the workflow of estimating MPs in the outlet of WWTPs; (ii) key limitations or challenges in each process that would increase the uncertainty in accurately estimating MPs; (iii) favorable recommendations that would lead to the standardization of protocols in the workflow and facilitate more accurate analysis of MPs; (iv) research opportunities to tackle the problem of ‘missing MPs’; and (v) future research directions for the efficient management of MPs. Considering the burgeoning research interest in the area of MPs, this work would help early scientists in understanding the current status in the field of MP analysis in the outlet of WWTPs.

Detection methods of micro and nanoplastics

Plastics and related contaminants (including microplastics; MPs and nanoplastics; NPs) have become a serious global safety issue due to their overuse in many products and applications and their inadequate management, leading to possible leakage into the environment and eventually to the food chain and humans. There is a growing literature reporting on the occurrence of plastics, (MPs and NPs) in both marine and terrestrial organisms, with many indications about the harmful impact of these contaminants on plants and animals, as well as potential human health risks. The presence of MPs and NPs in many foods and beverages including seafood (especially finfish, crustaceans, bivalves, and cephalopods), fruits, vegetables, milk, wine and beer, meat, and table salts, has become popular research areas in recent years. Detection, identification, and quantification of MPs and NPs have been widely investigated using a wide range of traditional methods, such as visual and optical methods, scanning electron microscopy, and gas chromatography-mass spectrometry, but these methods are burdened with a number of limitations. In contrast, spectroscopic techniques, especially Fourier-transform infrared spectroscopy and Raman spectroscopy, and other emerging techniques, such as hyperspectral imaging are increasingly being applied due to their potential to enable rapid, non-destructive, and high-throughput analysis. Despite huge research efforts, there is still an overarching need to develop reliable analytical techniques with low cost and high efficiency. Mitigation of plastic pollution requires establishing standard and harmonized methods, adopting holistic approaches, and raising awareness and engaging the public and policymakers. Therefore, this chapter focuses mainly on identification and quantification techniques of MPs and NPs in different food matrices (mostly seafood).

Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers

The scientific community has been focusing on studying and understanding the extent of damage caused by microplastics (MPs) to flora, fauna, and humans, including the environmental and health risks associated with them. MPs with different morphologies have been described in different environments, with fibers being the most common type regardless of the environment. Various methods have been used to analyze MPs. Analytical methodologies such as visual inspection, spectroscopic methods, and others currently used to study MPs are time-consuming, and only subjective results are obtained when these methods are used for sample analysis. Researchers have used various dyes, such as Nile Red (NR), a selective fluorescent stain, to differentiate the polymers from the other sample components and address these problems. Using such dyes helps distinguish polymer particles from other contaminants present in the samples. We aimed to study the analytical process, morphology, and wettability of synthetic (such as polyethylene and polypropylene) and natural (such as linen and cotton) fibers using NR to characterize the fibers. The fibers were fragmented manually, and the samples were prepared using a cryomicrotome. The prepared samples were subjected to different NR incubation times of 30 min, 24 h, and 168 h, and characterized under ultraviolet light using optical microscopy. We investigated the effect of NR on different fibers, and the samples selection using the fluorescence properties generated when the fibers adsorbed the NR dye. The wettabilities of the samples indicated that polyethylene and polypropylene were hydrophobic, while linen and cotton were hydrophilic. Both synthetic and natural fibers exhibited fluorescence properties in the presence of NR. This increased the complexity of executing the MP characterization process, indicating that combined methodologies and optical and chemical identification processes should be used to characterize plastic specimens efficiently. We summarize and discuss the results and findings and provide recommendations for future laboratory research on microplastic fibers focusing on (I) microplastic selection, (II) stain preparation, and (III) microplastic characterization.

Impact of coastal wastewater treatment plants on microplastic pollution in surface seawater and ecological risk assessment

This study aims to understand the influence of wastewater treatment plant discharge on the microplastic status in the surface seawater of Istanbul. For this purpose, for the first time, the distribution, composition, and ecological risk of microplastics at nine sampling stations on the southern coast of Istanbul, Marmara, were investigated at monthly intervals over a one-year period. The results showed that the microplastic abundance ranged from 0 to over 1000 particles per liter. Fibers were the dominant form at all stations. Microplastics 249-100 μm were the dominant size, and transparency was the color most found at all stations. Polyethylene and ethylene-vinyl acetate were the major types of microplastics, accounting for 50% overall. The pollution load index revealed that over 70% of sampling stations were at hazard level I. However, the hazardous index was categorized as level III with a value of 662.3 due to the presence of the most hazardous polymer named polyurethane. Further investigations into the risk assessment of MP can reveal crucial knowledge for understanding the microplastic cycle.

Characterization and regulation of microplastic pollution for protecting planetary and human health

Microplastics are plastic particles <5 mm in diameter. Since the 1950s, there has been an exponential increase in the production of plastics. As of 2015, it is estimated that approximately 6300 million metric tons of plastic waste had been generated of which 79% has accumulated in landfills or the natural environment. Further, it is estimated that if current trends continue, roughly 12,000 million metric tons of plastic waste will accumulate by 2050. Plastics and microplastics are now found ubiquitously-in the air, water, and soil. Microplastics are small enough to enter the tissues of plants and animals and have been detected in human lungs, stools, placentas, and blood. Their presence in human tissues and the food chain is a cause for concern. While direct clinical evidence or epidemiological studies on the adverse effects of microplastic on human health are lacking, in vitro cellular and tissue studies and in vivo animal studies suggest potential adverse effects. With the ever-increasing presence of plastic waste in our environment, it is critical to understand their effects on our environment and on human health. The use of plastic additives, many of which have known toxic effects are also of concern. This review provides a brief overview of microplastics and the extent of the microplastic problem. There have been a few inroads in regulating plastics but currently these are insufficient to adequately mitigate plastic pollution. We also review recent advances in microplastic testing methodologies, which should support management and regulation of plastic wastes. Significant efforts to reduce, reuse, and recycle plastics are needed at the individual, community, national, and international levels to meet the challenge. In particular, significant reductions in plastic production must occur to curb the impacts of plastic on human and worldwide health, given the fact that plastic is not truly recyclable.

Comparison between the traditional Manta net and an innovative device for microplastic sampling in surface marine waters

Manta nets are commonly used for microplastics sampling although a number of limitations have emerged. In this study we compare the manta net to an innovative microplastic sampler, referred to as MuMi, registered as utility model. The results highlight the large variability that can exist in the outcomes of the different studies due to the lack of harmonization between methods and the differing factors such as sampling mesh size, representativeness or reproducibility of the sampling volumes. Control over the filtered volume is an issue to be improved in trawl sampling methods, while in the MuMi sampler the control over the sampling depth could be improved. Still, MuMi represents a highly advantageous sampling system in terms of ease of operation, lower cost, smaller microplastics target size and greater precision, all while maintaining the representativeness of the collected samples.

Conjugated Polymer Nanoparticles as a Universal High-Affinity Probe for the Selective Detection of Microplastics

Microplastic (MP) pollution is a global challenge that requires immediate mitigation practices. Monitoring is crucial for quantifying MPs, but their mitigation remains very challenging due to several factors, including the lack of selective materials to specific polymers, and the low sensitivity of the current detection techniques. In this work, we introduce a novel design for the selective detection of MPs through fluorescence spectroscopy by exploiting conjugated polymer nanoparticles (CPNs). Fluorescent diketopyrrolopyrrole nanoparticles were prepared by nanoprecipitation to incorporate peripheral hyaluronic acid to increase their affinity for various plastics. The affinity of the new ligand for various types of MPs was examined through several characterization techniques, including fluorescence spectroscopy and microscopy, nanoparticle tracking analysis and computational studies. The new CPN were shown to be highly fluorescent in the presence of typically abundant MPs, achieving very strong binding constants in the picomolar range. This very strong affinity for a broad family of plastics was found to be the results of cooperative supramolecular effects and topographical affinity, as probed by advanced microscopy and in silico studies. Furthermore, the new affinity probes were shown to be highly selective for MPs, allowing for their detection in heterogeneous samples, including soil debris and other organic contaminants. The new materials design introduced in this work constitute a promising platform for the development of novel MP detection devices directly useable at the point of collection. Moreover, it opens new avenue for the mitigation of this environmental hazard through tailorable materials.

Fate of petroleum-based and plant-based teabags exposed to environmental soil conditions for one year

Petroleum-based plastics are materials which have provided important industrial benefits from being lightweight and having low production costs. However, plastic pollution is pervasive and ubiquitous on all environments. This has led some industries to rapidly introduce the so called ‘bioplastics’ into the market by switching the conventional ones for new plant-based alternatives with similar properties. However, little is known about the fate of such alternatives especially in the open environment. In this novel study, the degradation of teabags from eight different brands was investigated, five petroleum based (cellulose-PP blend) and three plant-based (cellulose, cellulose-PLA blend and PLA). The degradation was tested under real-environmental soil conditions over a 12-month period. Fourier Transform Infrared Spectroscopy (FTIR-ATR) and Scanning Electron Microscopy (SEM) techniques were used to examine the change in polymer makeup and surface degradation of teabags at 3 weeks, 3.5, 6 and 12 months. Teabag dry weight and any retrieved fragments were measured over time. Teabags that contained a plastic blended to cellulose were brittle or degraded into smaller fragments after 3 weeks in soil. Parallel to this, the cellulose layer also degraded in this short timeline. Petroleum-based teabags produced the highest numbers of PP fragments overtime and fragmented teabags were still found after 12 months. Plant-based teabags made of cellulose only or a blend of cellulose-PLA were absent from soil samples after 3.5 months, including no fragments. Contrary to this, teabags made of PLA which were marketed as completely biodegradable, persisted completely intact in soil throughout all time points. The novel results from this study provide a perspective on plastic degradation in terrestrial sources. Based on these findings, it can be recommended that teabags mostly made of cellulose or cellulose blended with a bioplastic present in a smaller ratio, are a better alternative to petroleum-based or pure PLA plastics, in terms of rapid environmental degradation. Further studies should focus on their ecotoxicity, additive presence, microbial degradation and life cycle in order to draw a full environmental assessment.

Paving roads with recycled plastics: Microplastic pollution or eco-friendly solution?

Although plastic-modified roads are a promising approach to reducing the amount of landfilled and incinerated plastic and improving asphalt pavement performance, the contribution of plastic-modified roads to microplastic pollution is unknown. This study aimed to develop a new abrasion procedure to quantify the release of microplastics from recycled plastic-modified asphalt depending on environmental factors, the type and content of plastic used, and the incorporation method in bitumen/asphalt. A Wet Track Abrasion machine was used to simulate road traffic abrasion on a plastic-modified asphalt sample, and a novel microplastic extraction procedure was designed to extract the generated microplastics. Incorporating recycled plastic as a polymer modifier in the bitumen matrix resulted in an early release of microplastics compared to its addition as a synthetic aggregate substitute in the asphalt mix. Cold temperatures and low pH values favoured the generation of microplastics from plastic-modified asphalt. Due to the lack of universal thresholds for the release of microplastics into the environment, environmental agencies and local authorities could benefit from this novel laboratory-based microplastic assessment procedure to foster the sustainable use of recycled plastic in roads.

Characterizing Fragmentation of Polystyrene Foam Debris by Isopods Oniscus asellus (Isopoda: Oniscidae) and Trachelipus rathkii (Isopoda: Trachelipodidae)

Microplastics present a novel and potentially unique threat to soil ecosystems, one whose effects may be mediated by soil organisms themselves. We investigated fragmentation of polystyrene (PS) foam into microplastic particles by two isopods, Oniscus asellus L. and Trachelipus rathkii Brandt, in laboratory arena experiments. First, we examined the temporal dynamics of fragmentation across a time span of 96 h. O. asellus produced more fragments than T. rathkii, and neither species significantly fragmented the PS foam until 48 h had passed. Second, we asked whether O. asellus would still fragment PS foam in the presence of an alternate, more natural substrate like wood. Wood did not significantly affect fragmentation rates, in line with the few other studies examining the effect of alternate food on soil invertebrates' propensity to consume and/or fragment plastics. Our results provide additional characterization of PS foam fragmentation by isopods and indicate that laboratory experiments involving soil invertebrates and plastic debris can take place over relatively short timespans of four or fewer days, but do not necessarily need to provide alternate food to prove that plastic consumption would still occur in its presence.

Nanoplastic Toxicity: Insights and Challenges from Experimental Model Systems

Nanoplastic particles (NPs) can be produced or derived from the degradation of several daily used products and can therefore be found in the air, water, and food. Every day, these microscopic particles are confronted by different routes of exposure. Recent investigations have shown the internalization of these particles, differing in size and modification, in vivo in aquatic organisms and terrestrial organisms, as well as in vitro in different human cell lines. During the last years, the number of studies investigating the effects of NPs using widely different model systems and experimental approaches is exponentially growing, thus providing information about NPs, especially about polystyrene particle toxicity on health. To facilitate the grasping of the most relevant information, an overview is provided on the toxic effects of NPs coming from studies in cellular systems and in vivo in model organisms and on aspects which can be of particular relevance for particle toxicity (e.g., particle internalization mechanisms and structural modifications). Major achievements and gaps in the field as well as the point of view on how more systematic studies and exploitation of in vivo model organisms may improve the knowledge on important aspects of NPs are also pointed out.

Anthropogenic microfibers are highly abundant at the Burdwood Bank seamount, a protected sub-Antarctic environment in the Southwestern Atlantic Ocean

Microplastics debris in the marine environment have been widely studied across the globe. Within these particles, the most abundant and prevalent type in the oceans are anthropogenic microfibers (MFs), although they have been historically overlooked mostly due to methodological constraints. MFs are currently considered omnipresent in natural environments, however, contrary to the Northern Hemisphere, data on their abundance and distribution in Southern Oceans ecosystems are still scarce, in particular for sub-Antarctic regions. Using Niskin bottles we've explored microfibers abundance and distribution in the water column (3-2450 m depth) at the Burdwood Bank (BB), a seamount located at the southern extreme of the Patagonian shelf, in the Southwestern Atlantic Ocean. The MFs detected from filtered water samples were photographed and measured using ImageJ software, to estimate length, width, and the projected surface area of each particle. Our results indicate that small pieces of fibers are widespread in the water column at the BB (mean of 17.4 ± 12.6 MFs.L^-1), from which, 10.6 ± 5.3 MFs.L^-1 were at the surface (3-10 m depth), 20 ± 9 MFs.L^-1 in intermediate waters (41-97 m), 24.6 ± 17.3 MFs.L^-1 in deeper waters (102-164 m), and 9.2 ± 5.3 MFs.L^-1 within the slope break of the seamount. Approximately 76.1% of the MFs were composed of Polyethylene terephthalate, and the abundance was dominated by the size fraction from 0.1 to 0.3 mm of length. Given the high relative abundance of small and aged MFs, and the oceanographic complexity of the study area, we postulate that MFs are most likely transported to the BB via the Antarctic Circumpolar Current. Our findings imply that this sub-Antarctic protected ecosystem is highly exposed to microplastic pollution, and this threat could be spreading towards the highly productive waters, north of the study area.

A review of microplastic fibres: generation, transport, and vectors for metal(loid)s in terrestrial environments

The laundering of synthetic fabrics has been identified as an important and diffuse source of microplastic (<5 mm) fibre contamination to wastewater systems. Home laundering can release up to 13 million fibres per kg of fabric, which end up in wastewater treatment plants. During treatment, 72-99% of microplastics are retained in the residual sewage sludge, which can contain upwards of 56 000 microplastics per kg. Sewage sludge is commonly disposed of by application to agricultural land as a soil amendment. In some European countries, application rates are up to 91%, representing an important pathway for microplastics to enter the terrestrial environment, which urgently requires quantification. Sewage sludge also often contains elevated concentrations of metals and metalloids, and some studies have quantified metal(loid) sorption onto various microplastics. The sorption of metals and metalloids is strongly influenced by the chemical properties of the sorbate, the solution chemistry, and the physicochemical properties of the microplastics themselves. Plastic-water partition coefficients for the sorption of cadmium, mercury and lead onto microplastics are up to 8, 32, and 217 mL g^-1 respectively. Sorptive capacities of microplastics may increase over time, due to environmental degradation processes increasing the specific surface area and surface density of oxygen-containing functional groups. A range of metal(loid)s, including cadmium, chromium, and zinc, have been shown to readily desorb from microplastics under acidic conditions. Sorbed metal(loid)s may therefore become more bioavailable to soil organisms when the microplastics are ingested, due to the acidic gut conditions facilitating desorption. Polyester (polyethylene terephthalate) should be of particular focus for future research, as few quantitative sorption studies currently exist, it is potentially overlooked from density separation studies due to its high density, and it is by far the most widely used fibre in apparel textiles production.

Evaluation of conventional wastewater treatment plants efficiency to remove microplastics in terms of abundance, size, shape, and type: A systematic review and Meta-analysis

In the present study Web of Science, Scopus, and PubMed as electronic databases were used to find work published up to October 27, 2020 about microplastics evaluation in conventional wastewater treatment plants. In total, 407 publications were found, of which 77 were eligible for meta-analysis. A comprehensive meta-analysis was undertaken to evaluate the relevant publications regarding microplastics abundance. The average microplastics abundance was within the 1-31,400, 0.2-12,580, 0.002-7863, and 0.003-447 items range per liter wastewater for influent, primary, secondary, and tertiary treatment steps, respectively. The difference between the abundance of microplastics characterization for the different treatment steps was analyzed using ANOVA or Kruskal-Wallis test (depending on the data distribution). According to the pooled data, the average microplastics abundance was 124.04, 20.67, 5.62, and 1.97 (items/l) for influent, primary, secondary, and tertiary treatment. The results of Egger's test (t = 7.49, P ≤ 0.0001) were statistically significant, suggesting the existence of publication bias.

Critical steps for microplastics characterization from the atmosphere

The microplastics found in many environments, whether in atmospheric, terrestrial, aquatic marine, or freshwater systems, result from exaggerated consumption of plastics. These, when discarded incorrectly, persist in the environment, and degrade into many forms. Researchers have studied microplastics using many collection and characterization methodologies, yet often obtaining divergent results for the same environments. This study presents a bibliographic review of sampling and characterization methodologies for nano and microplastics in the atmospheric environment. Part I of this review presents sampling types and pre-treatment microplastics found in the air to elucidate the principal means of separating plastic species with consequent polymer identification. In Part II, Infrared and Raman Spectroscopy techniques are evaluated for their precision in microplastic identification. The study demonstrates by a systematic revision that depending on the MPs origin, certain characterization techniques are more appropriate. Considering the direct influence of sample impurities, sample pre-treatment is a critical step for correct chemical identification.

The impact of nano/micro-plastics toxicity on seafood quality and human health: facts and gaps

Contamination of the food and especially marine environment with nano/micro-plastic particles has raised serious concern in recent years. Environmental pollution and the resulting seafood contamination with microplastic (MP) pose a potential threat to consumers. The absorption rate of the MP by fish is generally considered low, although the bioavailability depends on the physical and chemical properties of the consumed MP. The available safety studies are inconclusive, although there is an indication that prolonged exposure to high levels of orally administered MP can be hazardous for consumers. This review details novel findings about the occurrence of MP, along with its physical and chemical properties, in the marine environment and seafood. The effect of processing on the content of MP in the final product is also reviewed. Additionally, recent findings regarding the impact of exposure of MP on human health are discussed. Finally, gaps in current knowledge are underlined, and the possibilities for future research are indicated in the review. There is an urgent need for further research on the absorption and bioavailability of consumed MP and in vivo studies on chronic exposure. Policymakers should also consider the implementation of novel legislation related to MP presence in food.

Polymer quantification using the Rock-Eval® device for identification of plastics in sediments

In this work, artificial thermal degradation experiments using the Rock-Eval® device were performed on selected polymer microsphere samples (PE, PP, PE100, PA6, PA11, PFA and PET). The main idea of this work is first to create a database of different polymer standard responses using the specific Rock-Eval® FID/IR peak signals. Several specific Rock-Eval® parameters are now defined to characterize each polymer family. For instance, each polymer is characterized by specific quantified parameters like Total HC_polymer, Total CO_polymer, TotalCO2_polymer, Tpeak_polymer, among others. This study attempts to demonstrate if this quick thermal degradation method can be also used to characterize the plastic contents (detection, type, and quantity) in sedimentary samples. Results indicate that each investigated polymer shows specific Rock-Eval® parameters that can be considered as useful characteristics of polymer families (mainly Tpeak_polymer, TOC_polymer, PC_polymer, RC_polymer, total HC_polymer, total CO_polymer and total CO2_polymer parameters). Samples containing different mineral matrices (e.g. sand, shale, marl and carbonate) were also mixed with polymers at different concentrations varying between 0.2 and 4.2 wt%. These composite samples were also analyzed in order to evaluate their thermal degradation comparing their specific Rock-Eval® FID/IR signatures. For example, most composite samples show an excellent linear correlation between TOC, PC, RC, total HC, CO and CO2 parameters versus the amount polymer at different concentrations. Although more work is still needed, a methodology is here proposed to distinguish and quantify the presence of plastics in the environment applying the proposed polymer Rock-Eval® database.

Seafood Processing, Preservation, and Analytical Techniques in the Age of Industry 4.0

Fish and other seafood products are essential dietary components that are highly appreciated and consumed worldwide. However, the high perishability of these products has driven the development of a wide range of processing, preservation, and analytical techniques. This development has been accelerated in recent years with the advent of the fourth industrial revolution (Industry 4.0) technologies, digitally transforming almost every industry, including the food and seafood industry. The purpose of this review paper is to provide an updated overview of recent thermal and nonthermal processing and preservation technologies, as well as advanced analytical techniques used in the seafood industry. A special focus will be given to the role of different Industry 4.0 technologies to achieve smart seafood manufacturing, with high automation and digitalization. The literature discussed in this work showed that emerging technologies (e.g., ohmic heating, pulsed electric field, high pressure processing, nanotechnology, advanced mass spectrometry and spectroscopic techniques, and hyperspectral imaging sensors) are key elements in industrial revolutions not only in the seafood industry but also in all food industry sectors. More research is still needed to explore how to harness the Industry 4.0 innovations in order to achieve a green transition toward more profitable and sustainable food production systems.

Dynamics of airborne microplastics, appraisal and distributional behaviour in atmosphere; a review

The use of plastics is common across all aspects of human life owing to its durable and versatile nature. The generation and utilization of plastics are directly related to the anthropogenic activities. The extensive use of plastics and adoption of inappropriate waste-management frameworks has resulted in their release into the environment, where they may persist. Different environmental factors, such as, photochemical, thermo-oxidation, and biological degradation, can lead to the degradation of plastics into micro- (MPs) and nano-plastics (NPs). The behaviour and concentration of MPs in the terrestrial environment can depend on their size, density, and local atmospheric conditions. Microplastics and nanoplastics may enter the food web, carrying various organic pollutants, which bio-accumulate at different trophic levels, prompting organism health concerns. Microplastics being airborne identifies as new exposure route. Dietary and airborne exposure to MPs has led researchers to stress the importance of evaluating their toxicological potential. The primary goal of this paper is to explore the environmental fate of MPs from sources to sink in the terrestrial environment, as well as detail their potential impacts on human health. Additionally, this review article focuses on the presence of airborne microplastics, detailed sample pre-processing methods, and outlines analytical methods for their characterization.

Soil Invertebrates Generate Microplastics From Polystyrene Foam Debris

To fully understand microplastics' impact on soil ecosystems, one must recognize soil organisms as not just passively enduring their negative effects, but potentially contributing to microplastics' formation, distribution, and dynamics in soil. We investigated the ability of four soil invertebrates, the cricket Acheta domesticus L. (Orthoptera: Gryllidae), the isopod Oniscus asellus L. (Isopoda: Oniscidae), larvae of the beetle Zophobas morio Fabricius (Coleoptera: Tenebrionidae), and the snail Cornu aspersum Müller (Stylommatophora: Helicidae) to fragment macroscopic pieces of weathered or pristine polystyrene (PS) foam. We placed invertebrates into arenas with single PS foam pieces for 24 h, then collected and assessed the microplastic content of each invertebrate's fecal material, its cadaver, and the sand substrate of its arena via hydrogen peroxide digestion, filtration, and fluorescent staining. All taxa excreted PS particles, though snails only to a tiny extent. Beetle larvae produced significantly more microplastics than snails, and crickets and isopods fragmented the weathered PS foam pieces more than the pristine pieces, which they left untouched. A follow-up experiment with pristine PS foam assessed the effect of different treatments mimicking exposure to the elements on fragmentation by isopods. PS foam pieces soaked in a soil suspension were significantly more fragmented than untreated pieces or pieces exposed to UV light alone. These findings indicate that soil invertebrates may represent a source of microplastics to the environment in places polluted with PS foam trash, and that the condition of macroplastic debris likely affects its palatability to these organisms.

Microplastics in mangroves and coral reef ecosystems: a review

Microplastic pollution has recently been identified as a major issue for the health of ecosystems. Microplastics have typically sizes of less than 5 mm and occur in various forms, such as pellets, fibres, fragments, films, and granules. Mangroves and coral reefs are sensitive and restricted ecosystems that provide free ecological services such as coastal protection, maintaining natural cycles, hotspots of biodiversity and economically valuable goods. However, urbanization and industrial activities have started contaminating even these preserved ecosystems. Here we review sources, occurrence, and toxicity of microplastics in the trophic levels of mangrove and coral reef ecosystems. We present detection methods, such as microscopic identification and spectroscopy. We discuss mitigating measures that prevent the entry of microplastics into the marine environment.

Human and ecological health effects of nanoplastics: may not be a tiny problem

Nanoplastics (NPs) are present in food, soil, water, air and personal care products, resulting in concern regarding exposure and potential adverse effects. NPs principally arise from the degradation of larger-sized plastic particles. The uptake and effects of NPs in humans is not yet known. However, recent laboratory studies have documented the uptake and adverse effects of NPs from the cellular to the community level. As NPs are in the size range of particles that can be absorbed by cells, research on these materials should be accelerated to properly assess their potential risks.

In vivo impact assessment of orally administered polystyrene nanoplastics: biodistribution, toxicity, and inflammatory response in mice

To assess the in vivo impact of nanoplastics (NP) and coagulation-based purified NP (PurNP), this study analyzed for alterations in the biodistribution, toxicity and inflammatory response in ICR mice exposed to three different doses of NP (5, 25, and 50 mg/kg) and PurNP for 2 weeks. Except water consumption, which was dose-dependently and significantly increased in all NP-treated groups, most factors assessed for feeding behaviors and excretions remained constant, without any significant change. Orally administered NP was detected in the intestine, kidneys, and liver at all concentrations, although the accumulation was higher in the intestine than in the kidneys and liver. No significant alterations were detected in the levels of serum biochemical markers and histopathological structures. However, compared to the vehicle group, expressions of the inflammatory response proteins (iNOS and COX-2) and mRNA levels of the inflammatory cytokines were remarkably increased in the liver, kidneys, and intestine of NP-treated mice. A similar increase was detected in the oxidative stress responses, including ROS concentration, SOD activity, and Nrf2 expression. Furthermore, similar inflammatory responses were observed in the PurNP-treated group, as compared to the vehicle-treated group. The results presented in this study provide the first strong evidence that oral administration of NP for 2 weeks results in high accumulation in the liver, kidneys, and intestine of ICR mice, and induces severe inflammatory and oxidative stress responses. These results additionally confirm the efficacy of water purification using the tannic acid-mediated coagulation removal technique.