Near infrared quantum dots in biomedical applications: current status and future perspective

Synthesis, characterization, and evaluation of the anticancer properties of pH-responsive carvacrol-zinc oxide quantum dots on breast cancer cell line (MDA-MB-231)

Since most solid tumors have a low pH value, a pH-responsive drug delivery system may offer a broad method for tumor-targeting treatment. The present study is used to analyze the anticancer activity of carvacrol-zinc oxide quantum dots (CVC-ZnO QDs) against breast cancer cells (MDA-MB-231). CVC-ZnO QDs demonstrate pH responsive and are specifically released within the acidic pH tumor microenvironment. This property enables targeted drug delivery exclusively to cancer cells while minimizing the impact on normal cells. To the synthesized ZnO QDs, the CVC was loaded and then examined by X-ray diffraction, ultraviolet-visible, Fourier transform infrared spectrophotometer, scanning electron microscopy-energy dispersive X-ray, and transmission electron microscopy. For up to 20 h, CVC release was examined in different pH-buffered solutions. The results showed that carvacrol release was stable in an acidic pH solution. Further, cytotoxicity assay, antioxidant, and lipid peroxidation activity, reactive oxygen species, mitochondrial membrane potential, nuclear damage, and the ability of CVC-ZnO QDs to cause apoptosis were all examined. Apoptosis markers such as Bcl2, Bax, caspase-3, and caspase-9, were also studied. In conclusion, the CVC-ZnO QDs destabilized the MDA-MB-231cells under its acidic tumor microenvironment and regulated apoptosis.

ROS-mediated NRF2/p-ERK1/2 signaling-involved mitophagy contributes to macrophages activation induced by CdTe quantum dots

Cadmium telluride (CdTe) quantum dots (QDs) have garnered significant attention for tumor imaging due to their exceptional properties. However, there remains a need for further investigation into their potential toxicity mechanisms and corresponding enhancements. Herein, CdTe QDs were observed to accumulate in mouse liver, leading to a remarkable overproduction of IL-1β and IL-6. Additionally, there was evidence of macrophage infiltration and activation following exposure to 12.5 μmol/kg body weight of QDs. To elucidate the underlying mechanism of macrophage activation, CdTe QDs functionalized with 3-mercaptopropionic acid (MPA) were utilized. In vitro experiments revealed that 1.0 μM MPA-CdTe QDs activated PINK1-dependent mitophagy in RAW264.7 macrophages. Critically, the autophagic flux remained unimpeded, as demonstrated by the absence of p62 accumulation, LC3 turnover assay results, and successful fusion of autophagosomes with lysosomes. Mechanically, QDs increased reactive oxygen species (ROS) and mitoROS by damaging both mitochondria and lysosomes. ROS, in turn, inhibited NRF2, resulting in the phosphorylation of ERK1/2 and subsequent activation of mitophagy. Notably, 1.0 μM QDs disrupted lysosomes but autophagic flux was not impaired. Eventually, the involvement of the ROS-NRF2-ERK1/2 pathway-mediated mitophagy in the increase of IL-1β and IL-6 in macrophages was confirmed using Trolox, MitoTEMPO, ML385, specific siRNAs, and lentivirus-based interventions. This study innovatively revealed the pro-inflammatory rather than anti-inflammatory role of mitophagy in nanotoxicology, shedding new light on the mechanisms of mitochondrial disorders induced by QDs and identifying several molecular targets to comprehend the toxicological mechanisms of CdTe QDs.

Luminescence Thermometry with Nanoparticles: A Review

Luminescence thermometry has emerged as a very versatile optical technique for remote temperature measurements, exhibiting a wide range of applicability spanning from cryogenic temperatures to 2000 K. This technology has found extensive utilization across many disciplines. In the last thirty years, there has been significant growth in the field of luminous thermometry. This growth has been accompanied by the development of temperature read-out procedures, the creation of luminescent materials for very sensitive temperature probes, and advancements in theoretical understanding. This review article primarily centers on luminescent nanoparticles employed in the field of luminescence thermometry. In this paper, we provide a comprehensive survey of the recent literature pertaining to the utilization of lanthanide and transition metal nanophosphors, semiconductor quantum dots, polymer nanoparticles, carbon dots, and nanodiamonds for luminescence thermometry. In addition, we engage in a discussion regarding the benefits and limitations of nanoparticles in comparison with conventional, microsized probes for their application in luminescent thermometry.

Advances in optical molecular imaging for neural visualization

Iatrogenic nerve injury is a significant complication in surgery, which can negatively impact patients' quality of life. Currently, the main clinical neuroimaging methods, such as computed tomography, magnetic resonance imaging, and high-resolution ultrasonography, do not offer precise real-time positioning images for doctors during surgery. The clinical application of optical molecular imaging technology has led to the emergence of new concepts such as optical molecular imaging surgery, targeted surgery, and molecular-guided surgery. These advancements have made it possible to directly visualize surgical target areas, thereby providing a novel method for real-time identification of nerves during surgery planning. Unlike traditional white light imaging, optical molecular imaging technology enables precise positioning and identifies the cation of intraoperative nerves through the presentation of color images. Although a large number of experiments and data support its development, there are few reports on its actual clinical application. This paper summarizes the research results of optical molecular imaging technology and its ability to realize neural visualization. Additionally, it discusses the challenges neural visualization recognition faces and future development opportunities.

In Vitro and In Vivo Evaluation of Targeted Fluorescent Imaging Agents for Diagnosis and Resection of Cancer

Local re-occurrence of cancer in patients with solid tumors is currently the most common reason for failure of treatment strategies. This fact indicates that prevailing approaches for tumor resection can cure only 50% of patients. A major cause of failure in tumor resection is off-target drug cytotoxicity and lack of sensitivity in tumor detection methods. These disadvantages are addressed with the development of targeted therapy and diagnostics, which significantly aid treatment strategies. Targeted diagnostics exploit properties of tumor cells that show significant up-regulation of tumor biomarkers. These biomarkers are targeted by a homing ligand attached to a fluorophore for visual inspection during surgery. However, these approaches suffer from disadvantages like high autofluorescence from background tissues, tissue absorption, and scattering, resulting in decreased image sensitivity and resolution. The use of near-infrared (NIR) fluorophores to overcome these drawbacks has generated unprecedented interest among researchers. The NIR window lies within the range of 650 to 1,700 nm, which results in reduced absorption and scattering by the tissues, thereby providing deeper tissue penetration and reduced autofluorescence. NIR fluorophores can be designed to target tumor biomarkers such as prostate specific membrane antigen (PSMA) or folate receptors found over-expressed on cancer tissues. These targeted fluorophores consist of small-molecule ligands conjugated with NIR dyes that bind with high specificity to PSMA and folic acid receptors. In this protocol, we have extensively described the methodology for the synthesis of targeted NIR agents for PSMA (DUPA-NIR bioconjugate) and folic acid (folate-NIR bioconjugate), along with detailed steps for preclinical evaluation. Procedures to calculate the binding affinity to cancer cells in vitro are described, along with uptake and biodistribution in different mice models in vivo. © 2022 Wiley Periodicals LLC. Basic Protocol 1: Synthesis and purification of DUPA and folate-peptide linkers via a SPPS strategy Basic Protocol 2: Conjugation, purification, and characterization of targeted bioconjugates with NIR probe for deep-tissue imaging applications Basic Protocol 3: In vitro evaluation of binding affinity of targeted DUPA-NIR and folate-NIR bioconjugates using a spectrophotometer Basic Protocol 4: Induction of tumor in mice to develop CDX or metastatic tumor models Basic Protocol 5: Intravenous administration of targeted DUPA-NIR and folate-NIR bioconjugates in mouse CDX or metastatic tumor models for deep-tissue NIR imaging and tumor resection.

Nanomaterials Used in Fluorescence Polarization Based Biosensors

Fluorescence polarization (FP) has been applied in detecting chemicals and biomolecules for early-stage diagnosis, food safety analyses, and environmental monitoring. Compared to organic dyes, inorganic nanomaterials such as quantum dots have special fluorescence properties that can enhance the photostability of FP-based biosensing. In addition, nanomaterials, such as metallic nanoparticles, can be used as signal amplifiers to increase fluorescence polarization. In this review paper, different types of nanomaterials used in in FP-based biosensors have been reviewed. The role of each type of nanomaterial, acting as a fluorescent element and/or the signal amplifier, has been discussed. In addition, the advantages of FP-based biosensing systems have been discussed and compared with other fluorescence-based techniques. The integration of nanomaterials and FP techniques allows biosensors to quickly detect analytes in a sensitive and cost-effective manner and positively impact a variety of different fields including early-stage diagnoses.

Nanodiamonds as Possible Tools for Improved Management of Bladder Cancer and Bacterial Cystitis

Nanodiamonds (NDs) are a class of carbon nanomaterials with sizes ranging from a few nm to micrometres. Due to their excellent physical, chemical and optical properties, they have recently attracted much attention in biomedicine. In addition, their exceptional biocompatibility and the possibility of precise surface functionalisation offer promising opportunities for biological applications such as cell labelling and imaging, as well as targeted drug delivery. However, using NDs for selective targeting of desired biomolecules within a complex biological system remains challenging. Urinary bladder cancer and bacterial cystitis are major diseases of the bladder with high incidence and poor treatment options. In this review, we present: (i) the synthesis, properties and functionalisation of NDs; (ii) recent advances in the study of various NDs used for better treatment of bladder cancer and (iii) bacterial cystitis; and (iv) the use of NDs in theranostics of these diseases.

Recent Progress in Nanostructured Smart Drug Delivery Systems for Cancer Therapy: A Review

Traditional treatment approaches for cancer involve intravenous chemotherapy or other forms of drug delivery. These therapeutic measures suffer from several limitations such as nonspecific targeting, poor biodistribution, and buildup of drug resistances. However, significant technological advancements have been made in terms of superior modes of drug delivery over the last few decades. Technical capability in analyzing the molecular mechanisms of tumor biology, nanotechnology─particularly the development of biocompatible nanoparticles, surface modification techniques, microelectronics, and material sciences─has increased. As a result, a significant number of nanostructured carriers that can deliver drugs to specific cancerous sites with high efficiency have been developed. This particular maneuver that enables the introduction of a therapeutic nanostructured substance in the body by controlling the rate, time, and place is defined as the nanostructured drug delivery system (NDDS). Because of their versatility and ability to incorporate features such as specific targeting, water solubility, stability, biocompatibility, degradability, and ability to reverse drug resistance, they have attracted the interest of the scientific community, in general, and nanotechnologists as well as biomedical scientists. To keep pace with the rapid advancement of nanotechnology, specific technical aspects of the recent NDDSs and their prospects need to be reported coherently. To address these ongoing issues, this review article provides an overview of different NDDSs such as lipids, polymers, and inorganic nanoparticles. In addition, this review also reports the challenges of current NDDSs and points out the prospective research directions of these nanocarriers. From our focused review, we conclude that still now the most advanced and potent field of application for NDDSs is lipid-based, while other significantly potential fields include polymer-based and inorganic NDDSs. However, despite the promises, challenges remain in practical implementations of such NDDSs in terms of dosage and stability, and caution should be exercised regarding biocompatibility of materials. Considering these aspects objectively, this review on NDDSs will be particularly of interest for small-to-large scale industrial researchers and academicians with expertise in drug delivery, cancer research, and nanotechnology.

Biogenic Sulfur-Based Chalcogenide Nanocrystals: Methods of Fabrication, Mechanistic Aspects, and Bio-Applications

Bio-nanotechnology has emerged as an efficient and competitive methodology for the production of added-value nanomaterials (NMs). This review article gathers knowledge gleaned from the literature regarding the biosynthesis of sulfur-based chalcogenide nanoparticles (S-NPs), such as CdS, ZnS and PbS NPs, using various biological resources, namely bacteria, fungi including yeast, algae, plant extracts, single biomolecules, and viruses. In addition, this work sheds light onto the hypothetical mechanistic aspects, and discusses the impact of varying the experimental parameters, such as the employed bio-entity, time, pH, and biomass concentration, on the obtained S-NPs and, consequently, on their properties. Furthermore, various bio-applications of these NMs are described. Finally, key elements regarding the whole process are summed up and some hints are provided to overcome encountered bottlenecks towards the improved and scalable production of biogenic S-NPs.

Lycorine nanoparticles induce apoptosis through mitochondrial intrinsic pathway and inhibit migration and invasion in HepG2 cells

Lycorine-nanoparticles (LYC-NPs) were successfully synthesized using anti-solvent precipitation-freeze drying method, and characterized using transmission electron microscopy (TEM), particle size analysis and Fourier transform infrared spectroscopy (FTIR). Then, the antitumor effects of LYC-NPs against HepG2 cells were investigated, and the underlying molecular mechanisms were explored. Our results showed that LYC-NPs displayed potent antiproliferative against HepG2 cells concentration dependently. Flow cytometry analysis exhibited that LYC-NPs triggered apoptosis and impeded cell cycle in G0/G1 phase. Moreover, the up-regulated expression of cleaved caspases-3 and Bax, and decrease of mitochondrial membrane potential and the Bcl-2 expression were involved in LYC-NPs apoptosis, implying that LYC-NPs induced apoptosis via the mitochondrial-mediated apoptosis pathway. Furthermore, LYC-NPs distinctly impaired HepG2 cells migration and invasion with down-regulation of matrix metalloproteinase-2 (MMP-2) and MMP-9 expression. These results indicated that LYC-NPs could be an favorable agent for restraining the growth and metastasis of HepG2 cells.

Effects of Carboxyl or Amino Group Modified InP/ZnS Nanoparticles Toward Simulated Lung Surfactant Membrane

Quantum dots (QDs) as a promising optical probe have been widely used for in vivo biomedical imaging; especially enormous efforts recently have focused on the potential toxicity of QDs to the human body. The toxicological effects of the representative InP/ZnS QDs as a cadmium-free emitter are still in the early stage and have not been fully unveiled. In this study, the DPPC/DPPG mixed monolayer was used to simulate the lung surfactant monolayer. The InP/ZnS-COOH QDs and InP/ZnS-NH₂ QDs were introduced to simulate the lung surfactant membrane's environment in the presence of InP/ZnS QDs. The effects of InP/ZnS QDs on the surface behavior, elastic modulus, and stability of DPPC/DPPG mixed monolayer were explored by the surface pressure-mean molecular area isotherms and surface pressure-time curves. The images observed by Brewster angle microscope and atomic force microscope showed that the InP/ZnS QDs affected the morphology of the monolayer. The results further demonstrated that the InP/ZnS QDs coated with different surface groups can obviously adjust the mean molecular area, elastic modulus, stability, and microstructure of DPPC/DPPG mixed monolayer. Overall, this work provided useful information for in-depth understanding of the effects of the -COOH or -NH₂ group coated InP/ZnS QDs on the surface of lung surfactant membrane, which will help scientists to further study the physiological toxicity of InP/ZnS QDs to lung health.

3D-printed smartphone-based device for fluorimetric diagnosis of ketosis by acetone-responsive dye marker and red emissive carbon dots

A portable smartphone device is reported that uses 3D printing technology for the primary diagnosis of diseases by detecting acetone. The key part of the device consists of red carbon dots (RCDs), which are used as internal standards, and a sensing reagent (3-N,N-(diacethydrazide)-9-ethylcarbazole (2-HCA)) for acetone. With an excitation wavelength of 360 nm, the emission wavelengths of 2-HCA and RCDs are 443 nm and 619 nm, respectively. 2-HCA effectively captures acetone to form a nonfluorescent acylhydrazone via a condensation reaction occurring in aqueous solution, resulting in obvious color changes from blue-violet to dark red. The detection limit for acetone is 2.62 μM (~ 0.24 ppm). This is far lower than the ketone content in normal human blood (≤ 0.50 mM) and the acetone content in human respiratory gas (≤ 1.80 ppm). The device has good recovery rates for acetone detection in blood and exhaled breath, which are 90.56-109.98% (RSD ≤ 5.48) and 92.80-108.00% (RSD ≤ 5.07), respectively. The method designed here provides a reliable way to provide health warnings by visually detecting markers of ketosis/diabetes in blood or exhaled breath. The portable smart phone device visually detects ketosis/diabetes markers in the blood or exhaled breath through the nucleophilic addition reaction, which effectively captures acetone to form nonfluorescent acyl groups. This will be a reliable tool to warn human health.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Recent advances in near-infrared II imaging technology for biological detection

Molecular imaging technology enables us to observe the physiological or pathological processes in living tissue at the molecular level to accurately diagnose diseases at an early stage. Optical imaging can be employed to achieve the dynamic monitoring of tissue and pathological processes and has promising applications in biomedicine. The traditional first near-infrared (NIR-I) window (NIR-I, range from 700 to 900 nm) imaging technique has been available for more than two decades and has been extensively utilized in clinical diagnosis, treatment and scientific research. Compared with NIR-I, the second NIR window optical imaging (NIR-II, range from 1000 to 1700 nm) technology has low autofluorescence, a high signal-to-noise ratio, a high tissue penetration depth and a large Stokes shift. Recently, this technology has attracted significant attention and has also become a heavily researched topic in biomedicine. In this study, the optical characteristics of different fluorescence nanoprobes and the latest reports regarding the application of NIR-II nanoprobes in different biological tissues will be described. Furthermore, the existing problems and future application perspectives of NIR-II optical imaging probes will also be discussed.

NIR-quantum dots in biomedical imaging and their future

Fluorescence imaging has gathered interest over the recent years for its real-time response and high sensitivity. Developing probes for this modality has proven to be a challenge. Quantum dots (QDs) are colloidal nanoparticles that possess unique optical and electronic properties due to quantum confinement effects, whose excellent optical properties make them ideal for fluorescence imaging of biological systems. By selectively controlling the synthetic methodologies it is possible to obtain QDs that emit in the first (650-950 nm) and second (1000-1400 nm) near infra-red (NIR) windows, allowing for superior imaging properties. Despite the excellent optical properties and biocompatibility shown by some NIR QDs, there are still some challenges to overcome to enable there use in clinical applications. In this review, we discuss the latest advances in the application of NIR QDs in preclinical settings, together with the synthetic approaches and material developments that make NIR QDs promising for future biomedical applications.

An Improved Synthesis of Water-Soluble Dual Fluorescence Emission Carbon Dots from Holly Leaves for Accurate Detection of Mercury Ions in Living Cells

Background

Carbon dots (CDs) emitting near-infrared fluorescence were recently synthesized from green leaves. However, the Hg²⁺ detection of CDs was limited because of the insufficient water solubility, low fluorescence and poor stability.

Methods

Dual fluorescence emission water-soluble CD (Dual-CD) was prepared through a solvothermal method from holly leaves and low toxic PEI_1.8k. PEG was further grafted onto the surface to improve the water solubility and stability.

Results

The Dual-CD solution can emit 487 nm and 676 nm fluorescence under single excitation and exhibit high quantum yield of 16.8%. The fluorescence at 678 nm decreased remarkably while the emission at 470 nm was slightly affected by the addition of Hg²⁺. The ratiometric Hg²⁺ detection had a wide linear range of 0–100 μM and low detection limit of 14.0 nM. In A549 cells, there was a good linear relation between F₄₈₇/F₆₇₆ and the concentration of Hg²⁺ in the range of 0–60 μM; the detection limit was 477 nM. Furthermore, Dual-CD showed visual fluorescence change under Hg²⁺.

Conclusion

Dual-CD has ratiometric responsiveness to Hg²⁺ and can be applied for quantitative Hg²⁺ detection in living cells.

tLyP-1 Peptide Functionalized Human H Chain Ferritin for Targeted Delivery of Paclitaxel

PURPOSE

The aims of this study were to test the feasibility, targeting specificity and anticancer therapeutic efficacy of CendR motif tLyP-1 functionalized at the N-terminal of ferritin for paclitaxel (PTX) delivery.

METHODS

A tumor homing and penetrating peptide tLyP-1 was fused to the N-terminal of human H chain ferritin (HFtn) to generate a dual-targeting nanoparticle delivery system. PTX molecules were encapsulated into the HFtn nanocage using the disassembly/assembly method by adjusting pHs. Cellular uptake was examined by confocal laser scanning microscopy (CLSM) and flow cytometry. The MTT assay was used to test the cytotoxicity of various PTX-loaded NPs against MDA-MB-231 and SMMC-7721 tumor cells. The wound healing and cell migration assays were conducted to assess the inhibitory effect on cell motility and metastasis. The inhibition effect on the SMMC-7721 tumor spheroids was studied and penetration ability was evaluated by CLSM. The antitumor efficacy of PTX-loaded NPs was assessed in MDA-MB-231 breast cancer xenografted in female BALB/c nude mice.

RESULTS

Compared with HFtn-PTX, in vitro studies demonstrated that the tLyP-1-HFtn-PTX displayed enhanced intracellular delivery and better cytotoxicity and anti-invasion ability against both SMMC-7721 and MDA-MB-231 cells. The better penetrability and growth inhibitory effect on SMMC-7721 tumor spheroids were also testified. In vivo distribution and imaging demonstrated that the tLyP-1-HFtn-PTX NPs were selectively accumulated and penetrated at the tumor regions. Verified by the breast cancer cells model in BABL/c nude mice, tLyP-1-HFtn-PTX displayed higher in vivo therapeutic efficacy with lower systemic toxicity.

CONCLUSION

Ferritin decorated with tumor-homing penetration peptide tLyP-1 at the N terminal could deliver PTX specifically inside the cell via receptor-mediated endocytosis with better efficacy. The peptide tLyP-1 which is supposed to work only at the C terminus showed enhanced tumor tissue penetration and antitumor efficacy, demonstrating that it also worked at the N-terminal of HFtn.

c(RGDyk)-modified nanoparticles encapsulating quantum dots as a stable fluorescence probe for imaging-guided surgical resection of glioma under the auxiliary UTMD

Surgical resection remains the preferred approach for some patients with glioblastoma (GBM), and eradication of the residual tumour niche after surgical resection is very helpful for prolonging patient survival. However, complete surgical resection of invasive GBM is difficult because of its ambiguous boundary. Herein, a novel targeting material, c(RGDyk)-poloxamer-188, was synthesized by modifying carboxyl-terminated poloxamer-188 with a glioma-targeting cyclopeptide, c(RGDyk). Quantum dots (QDs) as fluorescent probe were encapsulated into the self-assembled c(RGDyk)-poloxamer-188 polymer nanoparticles (NPs) to construct glioma-targeted QDs-c(RGDyk)NP for imaging-guided surgical resection of GBM. QDs-c(RGDyk)NP exhibited a moderate hydrodynamic diameter of 212.4 nm, a negative zeta potential of -10.1 mV and good stability. QDs-c(RGDyk)NP exhibited significantly lower toxicity against PC12 and C6 cells and HUVECs than free QDs. Moreover, in vitro cellular uptake experiments demonstrated that QDs-c(RGDyk)NP specifically targeted C6 cells, making them display strong fluorescence. Combined with ultrasound-targeted microbubble destruction (UTMD), QDs-c(RGDyk)NP specifically accumulated in glioma tissue in orthotropic tumour rats after intravenous administration, evidenced by ex vivo NIR fluorescence imaging of bulk brain and glioma tissue sections. Furthermore, fluorescence imaging with QDs-c(RGDyk)NP guided accurate surgical resection of glioma. Finally, the safety of QDs-c(RGDyk)NP was verified using pathological HE staining. In conclusion, QDs-c(RGDyk)NP may be a potential imaging probe for imaging-guided surgery.

Whole-Body Fluorescence Imaging in the Near-Infrared Window

Fluorescence imaging is one of the most widely used in vivo imaging methods for both fundamental research and clinical practice. Due to the reduced photon scattering, absorption, and autofluorescence in tissues, the emerging near-infrared (NIR) imaging (650-1700 nm) can afford deep tissue imaging with high spatiotemporal resolution and in vivo report the anatomical structures as well as the physiological activities in a whole-body level. Here, we give a brief introduction to fluorescence imaging in the first NIR (NIR-I, 650-950 nm) and second NIR (NIR-II, 1000-1700 nm) windows, summarize the recently developed NIR fluorophores and their applications in whole-body vascular system imaging, precision cancer theranostics, and regenerative medicine. Finally, the clinical applications and future prospects of in vivo NIR fluorescence imaging are also discussed.

Near-infrared emission Cu, N-doped carbon dots for human umbilical vein endothelial cell labeling and their biocompatibility in vitro

Quantum dots (QDs) are luminescent semiconductor nanomaterials (NMs) with various biomedical applications, but the high toxicity associated with traditional QDs, such as Cd-based QDs, limits their uses in biomedicine. As such, the development of biocompatible metal-free QDs has gained extensive research interests. In this study, we synthesized near-infrared emission Cu, N-doped carbon dots (CDs) with optimal emission at 640 nm and a fluorescence quantum yield of 27.1% (in N,N-dimethylformamide [DMF]) by solvothermal method using o-phenylenediamine and copper acetate monohydrate. We thoroughly characterized the CDs and showed that they were highly fluorescent and stable under different conditions, although in highly acidic (pH = 1-2) or alkaline (pH = 12-13) solutions, a redshift or blueshift of fluorescence emission peak of Cu, N-doped CDs was also observed. When exposed to human umbilical vein endothelial cells (HUVECs), Cu, N-doped CDs only significantly induced cytotoxicity at very high concentrations (100 or 200 μg/ml), but their cytotoxicity appeared to be comparable with carbon black (CB) nanoparticles (NPs) at the same mass concentrations. As the mechanisms, 200 μg/ml Cu, N-doped CDs and CB NPs promoted endoplasmic reticulum (ER) stress proteins IRE1α and chop, leading to increased cleaved caspase 3/pro-caspase 3 ratio, but CB NPs were more effective. At noncytotoxic concentration (50 μg/ml), Cu, N-doped CDs successfully labeled HUVECs. In summary, we successfully prepared highly fluorescent and relatively biocompatible CDs to label HUVECs in vitro.

Toxicity of different types of quantum dots to mammalian cells in vitro: An update review

Currently, there are a great quantity type of quantum dots (QDs) that has been developed by researchers. Depending on the core material, they can be roughly divided into cadmium, silver, indium, carbon and silicon QDs. And studies on the toxicity of QDs are also increasing rapidly, but in vivo tests in model animals fail to reach a consistent conclusion. Therefore, we review the literatures dealing with the cytotoxicity of QDs in mammalian cells in vitro. After a short summary of the application characteristics of five types of QDs, the fate of QDs in cells will be discussed, ranging from the uptake, transportation, sublocation and excretion. A substantial part of the review will be focused on in vitro toxicity, in which the type of QDs is combined with their adverse effect and toxic mechanism. Because of their different luminescent properties, different subcellular fate, and different degree of cytotoxicity, we provide an overview on the balance of optical stability and biocompatibility of QDs and give a short outlook on future direction of cytotoxicology of QDs.

Silver ion-doped CdTe quantum dots as fluorescent probe for Hg2+ detection

Mercury(ii), which is a well-known toxic species, exists in the industrial waste water in many cases. In the present work, CdTe quantum dots (QDs) are studied as a fluorescence probe for Hg²⁺ detection. Ag ions are induced to QDs to enlarge their detection concentration range. l-cysteine is employed in the QD-based fluorescence probe to connect QDs with Hg²⁺. X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy results indicate the formation of zinc blende CdTe QDs with sizes of ∼5 nm and the existence of Ag⁺ in crystalline CdTe. Photoluminescence (PL) spectra and PL decay spectra were acquired to investigate the emission mechanism of Ag-doped CdTe QDs, revealing multi-emission in QD samples with higher concentrations of Ag⁺ doping. The highest PL quantum yield of the QD samples was 59.4%. Furthermore, the relationship between the fluorescence intensity and the concentration of Hg²⁺ has been established. Two linear relationships were obtained for the plot of F/F₀ against Hg²⁺ concentration, enlarging the detection concentration range of Hg²⁺.

Ag-doped CdTe QDs emit multiple-fluorescence peaks, and the relationship between fluorescence intensity and the concentration of Hg²⁺ is established. Two linear relationships are obtained, which is benefit to the extension of detection range.

Morphological and Surface-State Challenges in Ge Nanoparticle Applications

The intrinsic properties of Ge in tandem with advances in its nanostructuring have resulted in its increased attention in a variety of fields as an alternative to traditional group 12-14 and 14-16 nanoparticles (NPs). The small band gap and size-dependent development of the optical properties in tandem with their good charge transport properties make Ge NPs a suitable material for optoelectronic devices. The low toxicity of Ge, together with its IR photoluminescence (PL) that overlaps with desirable biological optical windows used for tissue imaging, allows the exploitation of these materials in the field of bioimaging and as drug carriers. In addition, the ability of germanium to both exhibit high mechanical stability in its NP form and alloy with lithium and sodium metals has led to it being a highly attractive material for next-generation lithium ion and beyond-lithium batteries. While it is attracting considerable attention in a variety of areas, research on Ge NPs is still relatively nascent. Fundamental aspects of this material, such as its Bohr radius and the origin of different observed PLs, are still under debate. Moreover, the ability to produce Ge NPs with controlled dimensions and morphology is not yet as mature as for other classes of nanomaterials. In this review, the mechanisms and origins of these properties will be introduced, which we then relate to specific applications presented in the literature.

Aqueous Synthesis of DNA-Functionalized Near-Infrared AgInS2/ZnS Core/Shell Quantum Dots

Biocompatibility, biofunctionality, and chemical stability are essential criteria to be fulfilled by quantum dot (QD) emitters for bio-imaging and -sensing applications. In addition to these criteria, achieving efficient near-infrared (NIR) emission with nontoxic QDs remains very challenging. In this perspective, we developed water-soluble NIR-emitting AgInS₂/ZnS core/shell (AIS/ZnS) QDs functionalized with DNA. The newly established aqueous route relying on a two-step hot-injection synthesis led to highly luminescent chalcopyrite-type AIS/ZnS core/shell QDs with an unprecedented photoluminescence quantum yield (PLQY) of 55% at 700 nm and a long photoluminescence (PL) decay time of 900 ns. Fast and slow hot injection of the precursors were compared for the AIS core QD synthesis, yielding a completely different behavior in terms of size, size distribution, stoichiometry, and crystal structure. The PL peak positions of both types of core QDs were 710 (fast) and 760 nm (slow injection) with PLQYs of 36 and 8%, respectively. The slow and successive incorporation of the Zn and S precursors during the subsequent shell growth step on the stronger emitting cores promoted the formation of a three-monolayer thick ZnS shell, evidenced by the increase of the average QD size from 3.0 to 4.8 nm. Bioconjugation of the AIS/ZnS QDs with hexylthiol-modified DNA was achieved during the ZnS shell growth, resulting in a grafting level of 5-6 DNA single strands per QD. The successful chemical conjugation of DNA was attested by UV-vis spectroscopy and agarose gel electrophoresis. Importantly, surface plasmon resonance imaging experiments using complementary DNA strands further corroborated the successful coupling and the stability of the AIS/ZnS-DNA QD conjugates as well as the preservation of the biological activity of the anchored DNA. The strong NIR emission and biocompatibility of these AIS/ZnS-DNA QDs provide a high potential for their use in biomedical applications.

Detection of Ferric Ions and Catecholamine Neurotransmitters via Highly Fluorescent Heteroatom Co-Doped Carbon Dots

Carbon dots (CDs) demonstrate very poor fluorescence quantum yield (QY). In this study, with the help of a hydrothermal method, we combined CDs with nitrogen and phosphorus elements belonging to the VA group (in the periodic table) to form heteroatom co-doped CDs, i.e., nitrogen and phosphorus co-doped carbon dots (NPCDs). These displayed a significant improvement in the QY (up to 84%), which was as much as four times than that of CDs synthesized by the same method. The as-prepared NPCDs could be used as an "off-on" fluorescence detector for the rapid and effective sensing of ferric ions (Fe3+) and catecholamine neurotransmitters (CNs) such as dopamine (DA), adrenaline (AD), and noradrenaline (NAD). The fluorescence of NPCDs was "turned off" and the emission wavelength was slightly red-shifted upon increasing the Fe3+ concentration. However, when CNs were incorporated, the fluorescence of NPCDs was recovered in a short response time; this indicated that CN concentration could be monitored, relying on enhancing the fluorescence signal of NPCDs. As a result, NPCDs are considered as a potential fluorescent bi-sensor for Fe3+ and CN detection. Particularly, in this research, we selected DA as the representative neurotransmitter of the CN group along with Fe3+ to study the sensing system based on NPCDs. The results exhibited good linear ranges with a limit of detection (LOD) of 0.2 and 0.1 µM for Fe3+ and DA, respectively.

Small ultra-red fluorescent protein nanoparticles as exogenous probes for noninvasive tumor imaging in vivo

Nanoparticles are excellent imaging agents for cancer, but variability in chemical structure, racemic mixtures, and addition of heavy metals hinders FDA approval in the United States. We developed a small ultra-red fluorescent protein, named smURFP, to have optical properties similar to the small-molecule Cy5, a heptamethine subclass of cyanine dyes (Ex/Em = 642/670 nm). smURFP has a fluorescence quantum yield of 18% and expresses so well in E. coli, that gram quantities of fluorescent protein are purified from cultures in the laboratory. In this research, the fluorescent protein smURFP was combined with bovine serum albumin into fluorescent protein nanoparticles. These nanoparticles are fluorescent with a quantum yield of 17% and 12-14 nm in diameter. The far-red fluorescent protein nanoparticles noninvasively image tumors in living mice via the enhanced permeation and retention (EPR) mechanism. This manuscript describes the use of a new fluorescent protein nanoparticle for in vivo fluorescent imaging. This protein nanoparticle core should prove useful as a biomacromolecular scaffold, which could bear extended chemical modifications for studies, such as the in vivo imaging of fluorescent protein nanoparticles targeted to primary and metastatic cancer, theranostic treatment, and/or dual-modality imaging with positron emission tomography for entire human imaging.

Bevacizumab-Conjugated Quantum Dots: In Vitro Antiangiogenic Potential and Biosafety in Rat Retina

Purpose: Disturbances that affect the inside of the eyeball tend to be highly harmful since they compromise the homeostasis of this organ. Alongside this, the eyeball has several anatomical barriers that prevent the entry of substances. This way, diseases that affect the retina are among those that present greater difficulty in the treatment. In many cases, abnormal proliferation of blood vessels (neovascularization) occurs from the lower layers of the retina. This process damages its structure physiologically and anatomically, causing the rapid and irreversible loss of visual capacity. This work aims to develop nanosuspensions of quantum dots (QDs) conjugated to bevacizumab. Methods: Two types of QDs were produced by aqueous route, stabilized with chitosan conjugated to bevacizumab. The antiangiogenic activity was evaluated in the chorioallantoic membrane model, in which results indicated discrete activity at the doses tested. Samples were assessed for their biosafety in animals, after intravitreal administration, by means of electroretinography (ERG), intraocular pressure (IOP) measurement, histological, morphometric, and immunohistochemical evaluation. Results: No significant alterations were detected in ERG that suggests damage to retinal function by the samples. No significant changes in IOP were also detected. The histological sections did not show signs of acute inflammation, although there was evidence of late retinal damage. The immunohistochemical analysis did not detect any apoptotic bodies. Conclusion: Preliminary results suggest that QDs present potential applicability in ocular therapy, and it is necessary to better characterize their in vivo behavior and to optimize their dosage.

Bright solid-state luminescence of green-red tunable CdTe@BaCO3 composite: Synthesis and properties

Realizing efficient solid-state luminescence is of great important to expand quantum dots (QDs) application fields. This work reports the preparation of CdTe@BaCO₃ composite by a one-pot precipitation method. Both steady-state PL and PL decay characteristics in either solid-state or colloid solution show no obvious difference, mainly benefited from the effective protection of BaCO₃ on QDs from the external environment. By utilizing green and red CdTe QDs as dual-color emission centers, precise emitting-color control from green (0.312, 0.667) to red (0.691, 0.292) could be achieved in CdTe@BaCO₃ composite by adjusting volume ratio of CdTe solution precursor. Our results demonstrate that this composite material shows bright solid-state luminescence and facile adjustment of the emitting color in QDs-based composite is feasible, which could offer new path to design color-tunable luminescent materials for future optoelectronic applications.

Electrochemical quantification of Ag2S quantum dots: evaluation of different surface coating ligands for bacteria determination

In this work, novel silver sulphide quantum dots (Ag₂S QD) are electrochemically quantified for the first time. The method is based on the electrochemical reduction of Ag⁺ to Ag⁰ at -0.3 V on screen-printed carbon electrodes (SPCEs), followed by anodic stripping voltammetric oxidation that gives a peak of currents at +0.06 V which represents the analytical signal. The optimized methodology allows the quantification of water-stabilized Ag₂S QD in the range of approximately 2 × 10⁹-2 × 10¹² QD·mL^-1 with a good reproducibility (RSD: 5%). Moreover, as proof-of-concept of relevant biosensing application, Ag₂S QD are evaluated as tags for Escherichia coli (E. coli) bacteria determination. Bacteria tagged with QD are separated by centrifugation from the sample solution and placed on the SPCE surface for quantitative analysis. The effect of two different Ag₂S QD surface coating/stabilizing agents on both the voltammetric response and the bacteria sensing is also evaluated. 3-mercaptopropionic acid (3-MPA) is studied as model of short length coating ligand with no affinity for the bacteria, while boronic acid (BA) is evaluated as longer length ligand with chemical affinity for the polysaccharides present in the peptidoglycan layer on the bacteria cells surface. The biosensing system allows to detect bacteria in the range 10^-1-10³ bacteria·mL^-1 with a limit of detection as low as 1 bacteria·mL^-1. This methodology is a promising proof-of-concept alternative to traditional laboratory-based tests, with good sensitivity and short time and low cost of analysis. Graphical abstractNovel silver sulphide quantum dots (Ag₂S QD) are electrochemically quantified for the first time. Moreover, Ag₂S QD are evaluated as tags for Escherichia coli bacteria determination. The effect of two different QD surface coating ligands is also evaluated.

Semiconductor Quantum Dots as Components of Photoactive Supramolecular Architectures

Luminescent quantum dots (QDs) are colloidal semiconductor nanocrystals consisting of an inorganic core covered by a molecular layer of organic surfactants. Although QDs have been known for more than thirty years, they are still attracting the interest of researchers because of their unique size-tunable optical and electrical properties arising from quantum confinement. Moreover, the controlled decoration of the QD surface with suitable molecular species enables the rational design of inorganic-organic multicomponent architectures that can show a vast array of functionalities. This minireview highlights the recent progress in the use of surface-modified QDs - in particular, those based on cadmium chalcogenides - as supramolecular platforms for light-related applications such as optical sensing, triplet photosensitization, photocatalysis and phototherapy.

Separation of subcellular fluorescent microspheres by capillary electrophoresis

Fluorescent microspheres (FMs) are widely employed in diagnostics and life sciences research; here, we investigated the effect of capillary coating, polymer concentration, electric field strength, and sample concentration on the separation performance of 1.0 μm FMs in hydroxyethyl cellulose (HEC) by capillary electrophoresis (CE). Results showed that (1) capillary coating could enhance the fluorescence signal. (2) For HEC with the same molecular weight, the higher HEC concentration is, the later the first peak appears in the electropherogram. (3) When FMs are diluted, increasing the electric field strength can enhance the migration speed and reduce the aggregation of FMs. (4) The number of FMs calculated is close to the theoretical value when it is diluted 10,000 times. The optimum conditions for CE were as follows: 6 cm/8 cm of effective length and total length of the coated capillary, 0.3% HEC (1300 k), and 300 V/cm of electric field strength. Such a study is helpful for the development of a FM counting system. Graphical abstract.

Nanoparticle-based Cell Trackers for Biomedical Applications

The continuous or real-time tracking of biological processes using biocompatible contrast agents over a certain period of time is vital for precise diagnosis and treatment, such as monitoring tissue regeneration after stem cell transplantation, understanding the genesis, development, invasion and metastasis of cancer and so on. The rationally designed nanoparticles, including aggregation-induced emission (AIE) dots, inorganic quantum dots (QDs), nanodiamonds, superparamagnetic iron oxide nanoparticles (SPIONs), and semiconducting polymer nanoparticles (SPNs), have been explored to meet this urgent need. In this review, the development and application of these nanoparticle-based cell trackers for a variety of imaging technologies, including fluorescence imaging, photoacoustic imaging, magnetic resonance imaging, magnetic particle imaging, positron emission tomography and single photon emission computing tomography are discussed in detail. Moreover, the further therapeutic treatments using multi-functional trackers endowed with photodynamic and photothermal modalities are also introduced to provide a comprehensive perspective in this promising research field.

A coumarin-containing Schiff base fluorescent probe with AIE effect for the copper(ii) ion

A novel coumarin-derived Cu²⁺-selective Schiff base fluorescent “turn-off” chemosensor CTPE was successfully obtained, which showed an AIE effect. It could identify Cu²⁺ by quenching its fluorescence. The lower limit of detection was 0.36 μM. CTPE can act as a highly selective and sensitive fluorescence probe for detecting Cu²⁺.

A novel coumarin-derived Schiff base fluorescent “turn-off” chemosensor with AIE effect showed selectivity towards Cu²⁺. The recognition mechanism is presented.

The Frontiers of Nanomaterials (SnS, PbS and CuS) for Dye-Sensitized Solar Cell Applications: An Exciting New Infrared Material

To date, extensive studies have been done on solar cells on how to harness the unpleasant climatic condition for the binary benefits of renewable energy sources and potential energy solutions. Photovoltaic (PV) is considered as, not only as the future of humanity's source of green energy, but also as a reliable solution to the energy crisis due to its sustainability, abundance, easy fabrication, cost-friendly and environmentally hazard-free nature. PV is grouped into first, second and third-generation cells. Dye-sensitized solar cells (DSSCs), classified as third-generation PV, have gained more ground in recent times. This is linked to their transparency, high efficiency, shape, being cost-friendly and flexibility of colour. However, further improvement of DSSCs by quantum dot sensitized solar cells (QDSSCs) has increased their efficiency through the use of semiconducting materials, such as quantum dots (QDs), as sensitizers. This has paved way for the fabrication of semiconducting QDs to replace the ideal DSSCs with quantum dot sensitized solar cells (QDSSCs). Moreover, there are no absolute photosensitizers that can cover all the infrared spectrum, the infusion of QD metal sulphides with better absorption could serve as a breakthrough. Metal sulphides, such as PbS, SnS and CuS QDs could be used as photosensitizers due to their strong near infrared (NIR) absorption properties. A few great dependable and reproducible routes to synthesize better QD size have attained much ground in the past and of late. The injection of these QD materials, which display (NIR) absorption with localized surface plasmon resonances (SPR), due to self-doped p-type carriers and photocatalytic activity could enhance the performance of the solar cell. This review will be focused on QDs in solar cell applications, the recent advances in the synthesis method, their stability, and long term prospects of QDSSCs efficiency.

Optically Active Nanomaterials for Bioimaging and Targeted Therapy

Non-invasive tracking for monitoring the selective delivery and transplantation of biotargeted agents in vivo has been employed as one of the most effective tools in the field of nanomedicine. Different nanoprobes have been developed and applied to bioimaging tissues and the treatment of diseases ranging from inflammatory and cardiovascular diseases to cancer. Herein, we will review the recent advances in the development of optics-responsive nanomaterials, including organic and inorganic nanoparticles, for multimodal bioimaging and targeted therapy. The main focus is placed on nanoprobe fabrication, mechanistic illustrations, and diagnostic, or therapeutical applications. These nanomedicine strategies have promoted a better understanding of the biological events underlying diverse disease etiologies, thereby facilitating diagnosis, illness evaluation, therapeutic effect, and drug discovery.

Cu-doped quantum dots: a new class of near-infrared emitting fluorophores for bioanalysis and bioimaging

Transition metal ion-doped quantum dots (QDs) exhibit unique optical and photophysical properties that offer significant advantages over undoped QDs, such as larger Stokes shift to avoid self-absorption/energy transfer, longer excited-state lifetimes, wider spectral window, and improved chemical and thermal stability. Among the doped QDs emitters, Cu is widely introduced into the doped QDs as novel, efficient, stable, and tunable optical materials that span a wide spectrum from blue to near-infrared (NIR) light. Their unique physical and chemical characteristics enable the use of Cu-doped QDs as NIR labels for bioanalysis and bioimaging. In this review, we discuss doping mechanisms and optical properties of Cu-doped QDs that are capable of NIR emission. Applications of Cu-doped QDs in in vitro biosensing and in in vivo bioimaging are highlighted. Moreover, a prospect of the future of Cu-doped QDs for bioanalysis and bioimaging are also summarized.

Rational design of NIR fluorescence probes for sensitive detection of viscosity in living cells

Developing near-infrared (NIR) fluorescence probes for detection of intracellular viscosity is still sufficiently challenging. In this work, three kinds of D-A-D type naphthyl and 2,1,3‑benzoxadiazol hybrid NIR dyes functionalized with amino (NY1), N‑methylamino (NY2) and N,N‑dimethylamino (NY3) groups for intracellular micro-viscosity detection were designed and synthesized. All the probes exhibited very weak NIR emission in low viscosity environment and obvious fluorescence enhancement with the increased viscosity. Different substituent groups had a high impact on the photophysical properties and response sensitive of the probes to viscosity. The structure-property relationships were systematic investigated. The results showed that stronger electron-donating ability and larger steric effect of N,N‑dimethylamino led to a narrower energy gap and more sensitive to viscosity environment. Therefore, NY3 exhibited higher signal noise ratio for viscosity detection and was successfully applied for imaging the changes of intracellular micro-viscosity. This work provides an efficient way to design powerful NIR fluorescence probes for viscosity detection.

Nanoparticles for Bioapplications: Study of the Cytotoxicity of Water Dispersible CdSe(S) and CdSe(S)/ZnO Quantum Dots

Semiconductor nanocrystals or quantum dots (QDs) have unique optical and physical properties that make them potential imaging tools in biological and medical applications. However, concerns over the aqueous dispersivity, toxicity to cells, and stability in biological environments may limit the use of QDs in such applications. Here, we report an investigation into the cytotoxicity of aqueously dispersed CdSe(S) and CdSe(S)/ZnO core/shell QDs in the presence of human colorectal carcinoma cells (HCT-116) and a human skin fibroblast cell line (WS1). The cytotoxicity of the precursor solutions used in the synthesis of the CdSe(S) QDs was also determined in the presence of HCT-116 cells. CdSe(S) QDs were found to have a low toxicity at concentrations up to 100 µg/mL, with a decreased cell viability at higher concentrations, indicating a highly dose-dependent response. Meanwhile, CdSe(S)/ZnO core/shell QDs exhibited lower toxicity than uncoated QDs at higher concentrations. Confocal microscopy images of HCT-116 cells after incubation with CdSe(S) and CdSe(S)/ZnO QDs showed that the cells were stable in aqueous concentrations of 100 µg of QDs per mL, with no sign of cell necrosis, confirming the cytotoxicity data.

Infrared Quantum Dots: Progress, Challenges, and Opportunities

Infrared technologies provide tremendous value to our modern-day society. The need for easy-to-fabricate, solution-processable, tunable infrared active optoelectronic materials has driven the development of infrared colloidal quantum dots, whose band gaps can readily be tuned by dimensional constraints due to the quantum confinement effect. In this Perspective, we summarize recent progress in the development of infrared quantum dots both as infrared light emitters ( e.g., in light-emitting diodes, biological imaging, etc.) as well as infrared absorbers ( e.g., in photovoltaics, solar fuels, photon up-conversion, etc.), focusing on how fundamental breakthroughs in synthesis, surface chemistry, and characterization techniques are facilitating the implementation of these nanostructures into exploratory device architectures as well as in emerging applications. We discuss the ongoing challenges and opportunities associated with infrared colloidal quantum dots.