Reversible SO2 Uptake by Tetraalkylammonium Halides: Energetics and Structural Aspects of Adduct Formation Between SO2 and Halide Ions

Hydrogen Bonds Stabilize Chloroselenite Anions: Crystal Structure of a New Salt and Donor-Acceptor Bonding to SeO2

The single-crystal X-ray diffraction structure characterizing a new 4-methylbenzamidinium salt of chloroselenite [C8H11N2][ClSeO2] is reported. This is only the second crystal structure report on a ClSeO2- salt. The structure contains an extended planar hydrogen bond net, including a double interaction with both O atoms of the anion (an R228 ring in Etter notation). The anion has the shortest Se-Cl distances on record for any chloroselenite ion, 2.3202(9) Å. However, the two Se-O distances are distinct at 1.629(2) and 1.645(2) Å, attributed to weak anion-anion bridging involving the oxygen with the longer bond. DFT computations at the RB3PW91-D3/aug-CC-pVTZ level of theory reproduce the short Se-Cl distance in a gas-phase optimized ion pair, but free optimization of ClSeO2- leads to an elongation of this bond. A good match to a known value for [Me4N][ClSeO2] is found, which fits to the Raman spectroscopic evidence for this long-known salt and to data measured on solutions of the anion in CH3CN. The assignment of the experimental Raman spectrum was corrected by means of the DFT-computed vibrational spectrum, confirming the strong mixing of the symmetry coordinate of the Se-Cl stretch with both ν2 and ν4 modes.

Deoxygenation of chalcogen oxides EO2 (E = S, Se) with phospha-Wittig reagents

In here we present the deoxygenation of the chalcogen oxides EO₂ (E = S, Se) with R-P(PMe₃), so-called phospha-Wittig reagents. The reaction of DABSO (DABCO·2SO₂) with R-P(PMe₃) (R = Mes*, 2,4,6-tBu₃-C₆H₂; ^MesTer, 2,6-(2,4,6-Me₃-C₆H₂)₂-C₆H₃) resulted in the formation of thiadiphosphiranes (RP)₂S (1:R), while selenadiphosphiranes (RP)₂Se (2:R) were afforded with SeO₂, both accompanied by the formation of OPMe₃. Utilizing the sterically more encumbered ^DipTer-P(PMe₃) (^DipTer = 2,6-(2,6-iPr₂-C₆H₃)₂-C₆H₃) a different selectivity was observed and (^DipTerP)₂Se (2:DipTer) along with [Se(μ-P^DipTer)]₂ (3:DipTer) were isolated as the Se-containing species in the reaction with SeO₂. Interestingly, the reaction with DABSO (or with equimolar ratios of SeO₂ at elevated temperatures) gave rise to the formation of the OPMe₃-stabilized dioxophosphorane (phosphinidene dioxide) ^DipTerP(O)₂-OPMe₃ (4:DipTer) as the main product. This contrasting reactivity can be rationalized by two potential pathways in the reaction with EO₂: (i) a Wittig-type pathway and (ii) a pathway involving oxygenation of the phospha-Wittig reagents and release of SO. Thus, phospha-Wittig reagents are shown to be useful synthetic tools for the metal-free deoxygenation of EO₂ (E = S, Se).

Metal-free glycosylation with glycosyl fluorides in liquid SO2

Liquid SO₂ is a polar solvent that dissolves both covalent and ionic compounds. Sulfur dioxide possesses also Lewis acid properties, including the ability to covalently bind Lewis basic fluoride ions in a relatively stable fluorosulfite anion (FSO₂ ^-). Herein we report the application of liquid SO₂ as a promoting solvent for glycosylation with glycosyl fluorides without any external additive. By using various temperature regimes, the method is applied for both armed and disarmed glucose and mannose-derived glycosyl fluorides in moderate to excellent yields. A series of pivaloyl-protected O- and S-mannosides, as well as one example of a C-mannoside, are synthesized to demonstrate the scope of the glycosyl acceptors. The formation of the fluorosulfite species during the glycosylation with glycosyl fluorides in liquid SO₂ is proved by ¹⁹F NMR spectroscopy. A sulfur dioxide-assisted glycosylation mechanism that proceeds via solvent separated ion pairs is proposed, whereas the observed α,β-selectivity is substrate-controlled and depends on the thermodynamic equilibrium.

Sulfur dioxide removal: An overview of regenerative flue gas desulfurization and factors affecting desulfurization capacity and sorbent regeneration

Numerous mitigation techniques have been incorporated to capture or remove SO₂ with flue gas desulfurization (FGD) being the most common method. Regenerative FGD method is advantageous over other methods due to high desulfurization efficiency, sorbent regenerability, and reduction in waste handling. The capital costs of regenerative methods are higher than those of commonly used once-through methods simply due to the inclusion of sorbent regeneration while operational and management costs depend on the operating hours and fuel composition. Regenerable sorbents like ionic liquids, deep eutectic solvents, ammonium halide solutions, alkyl-aniline solutions, amino acid solutions, activated carbons, mesoporous silica, zeolite, and metal-organic frameworks have been reported to successfully achieve high SO₂ removal. The presence of other gases in flue gas, e.g., O₂, CO₂, NOx, and water vapor, and the reaction temperature critically affect the sorption capacity and sorbent regenerability. To obtain optimal SO₂ removal performance, other parameters such as pH, inlet SO₂ concentration, and additives need to be adequately governed. Due to its high removal capacity, easy preparation, non-toxicity, and low regeneration temperature, the use of deep eutectic solvents is highly feasible for upscale utilization. Metal-organic frameworks demonstrated highest reported SO₂ removal capacity; however, it is not yet applicable at industrial level due to its high price, weak stability, and robust formulation.

Understanding the Localization of Berylliosis: Interaction of Be2+ with Carbohydrates and Related Biomimetic Ligands

The interplay of metal ions with polysaccharides is important for the immune recognition in the lung. Due to the localization of beryllium associated diseases to the lung, it is likely that beryllium carbohydrate complexes play a vital role for the development of berylliosis. Herein, we present a detailed study on the interaction of Be²⁺ ions with fructose and glucose as well as simpler biomimetic ligands, which emulate binding motives of saccharides. Through NMR and IR spectroscopy as well as single‐crystal X‐ray diffraction, complemented by competition reactions we were able to determine a distinctive trend in the binding affinity of these ligands. This suggests that under physiological conditions beryllium ions are only bound irreversibly in glycoproteins or polysaccharides if a quasi ideal tetrahedral environment and κ⁴‐coordination is provided by the respective biomolecule. Furthermore, Lewis acid induced conversions of the ligands and an extreme increase in the Brønstedt acidity of the present OH‐groups imply that upon enclosure of Be²⁺, alterations may be induced by the metal ion in glycoproteins or polysaccharides. In addition the frequent formation of Be‐O‐heterocycles indicates that multinuclear beryllium compounds might be the actual trigger of berylliosis. This investigation on beryllium coordination chemistry was supplemented by binding studies of selected biomimetic ligands with Al³⁺, Zn²⁺, Mg²⁺, and Li⁺, which revealed that none of these beryllium related ions was tetrahedrally coordinated under the give conditions. Therefore, studies on the metabolization of beryllium compounds cannot be performed with other hard cations as a substitute for the hazardous Be²⁺.

The Chalcogen Bond in Crystalline Solids: A World Parallel to Halogen Bond

The distribution of the electron density around covalently bonded atoms is anisotropic, and this determines the presence, on atoms surface, of areas of higher and lower electron density where the electrostatic potential is frequently negative and positive, respectively. The ability of positive areas on atoms to form attractive interactions with electron rich sites became recently the subject of a flurry of papers. The halogen bond (HaB), the attractive interaction formed by halogens with nucleophiles, emerged as a quite common and dependable tool for controlling phenomena as diverse as the binding of small molecules to proteinaceous targets or the organization of molecular functional materials. The mindset developed in relation to the halogen bond prompted the interest in the tendency of elements of groups 13-16 of the periodic table to form analogous attractive interactions with nucleophiles. This Account addresses the chalcogen bond (ChB), the attractive interaction formed by group 16 elements with nucleophiles, by adopting a crystallographic point of view. Structures of organic derivatives are considered where chalcogen atoms form close contacts with nucleophiles in the geometry typical for chalcogen bonds. It is shown how sulfur, selenium, and tellurium can all form chalcogen bonds, the tendency to give rise to close contacts with nucleophiles increasing with the polarizability of the element. Also oxygen, when conveniently substituted, can form ChBs in crystalline solids. Chalcogen bonds can be strong enough to allow for the interaction to function as an effective and robust tool in crystal engineering. It is presented how chalcogen containing heteroaromatics, sulfides, disulfides, and selenium and tellurium analogues as well as some other molecular moieties can afford dependable chalcogen bond based supramolecular synthons. Particular attention is given to chalcogen containing azoles and their derivatives due to the relevance of these moieties in biosystems and molecular materials. It is shown how the interaction pattern around electrophilic chalcogen atoms frequently recalls the pattern around analogous halogen, pnictogen, and tetrel derivatives. For instance, directionalities of chalcogen bonds around sulfur and selenium in some thiazolium and selenazolium derivatives are similar to directionalities of halogen bonds around bromine and iodine in bromonium and iodonium compounds. This gives experimental evidence that similarities in the anisotropic distribution of the electron density in covalently bonded atoms translates in similarities in their recognition and self-assembly behavior. For instance, the analogies in interaction patterns of carbonitrile substituted elements of groups 17, 16, 15, and 14 will be presented. While the extensive experimental and theoretical data available in the literature prove that HaB and ChB form twin supramolecular synthons in the solid, more experimental information has to become available before such a statement can be safely extended to interactions wherein elements of groups 14 and 15 are the electrophiles. It will nevertheless be possible to develop some general heuristic principles for crystal engineering. Being based on the groups of the periodic table, these principles offer the advantage of being systematic.

The thermochromic behavior of aromatic amine-SO2 charge transfer complexes

The distinct thermochromism observed in solutions containing N,N-dimethylaniline (DMA) and N,N-diethylaniline (DEA) and SO₂ was investigated by resonance Raman spectroscopy in a wide range of temperatures. The results indicate in addition to the charge transfer (CT) complexes DMA-SO₂ and DEA-SO₂, the presence of collision complexes involving the CT complexes and excess DMA and DEA molecules. The latter in fact is the chromophore responsible for the long wavelength absorption originating the color. The Raman signature of the collision complex was attributed to the distinct enhancement of a band at 1140cm^-1 assigned to ν_s(SO₂), in contrast to the same mode in the 1:1 complex at 1115cm^-1. The intensity of such band, assigned to the collision complex is favored at high temperatures and depends on the steric hindrance associated to amines, as well as the SO₂ molar fraction. Quantum chemical calculations based on time-dependent density functional theory (TDDFT) support the proposed interpretation.

Absorption of SO2(g) by TDAE[O2SSO2](s) to Give TDAE[O2SS(O)2SO2](s): Related Reactions of [NR4]2[O2SSO2](s) (R = CH3, C2H5)

One mole equivalent of gaseous SO2 is absorbed by purple TDAE[O2SSO2](s), producing red, essentially spectroscopically pure TDAE[O2SS(O)2SO2](s); under prolonged evacuation, the product loses SO2(g), regenerating TDAE[O2SSO2](s). Similarly, [NR4]2[O2SS(O)2SO2](s) (R = Et, Me) can be prepared, albeit at lower purity, from the corresponding tetraalkylammonium dithionites (prepared by a modification of the known [NEt4]2[O2SSO2](s) preparation). While the [NEt4](+) salt is stable at rt; the [NMe4](+) salt has only limited stability at -78 °C. Vibrational spectra assignments for the anion in these salts were distinctly different from those for the anion in salts containing the long-known [O3SSSO3](2-) dianion, the most thermodynamically stable form of [S3O6](2-) (we prepared TDAE[O3SSSO3]·H2O(s) and obtained its structure by X-ray diffraction and vibrational analyses). The best fit between the calculated ((B3PW91/6-311+G(3df) and PBE0/6-311G(d)) and experimental vibrational spectra were obtained with the dianion having the [O2SS(O)2SO2](2-) structure. Vibrational analyses of the three [O2SS(O)2SO2](2-) salts prepared in this work showed that the corresponding [O3SSO2](2-) salts were present as a ubiquitous decomposition product. The formation of these new [O2SS(O)2SO2](2-) dianion salts was predicted to be favorable for [NMe4](+) and larger cations using a combination of theoretical calculations (B3PW91/6-311+G(3df)) and volume based thermodynamics (VBT). Similar methods accounted for the greater stabilities of the TDAE(2+) and [NEt4](+) salts of [O2SS(O)2SO2](2-) compared to [NMe4]2[O2SS(O)2SO2](s) toward irreversible decomposition to the corresponding [O3SSO2](2-) salts. These salts represent the first known examples of a new class of poly(sulfur dioxide) dianion, [SO2]n(2-) in which n > 2.

Synthesis of [N(CH3)4]2O3SOSO2(s) and [N(CH3)4]2[(O2SO)2SO2]·SO2(s) containing (SO4)(SO2)x(2-) x = 1, 2, members of a new class of sulfur oxydianions

One mole equivalent of SO2 reversibly reacts with [N(CH3)4]2SO4(s) to give [N(CH3)4]2S2O6(s) (1) containing the [O3SOSO2](2-), shown by Raman and IR to be an isomer of the [O3SSO3](2-) dianion. The experimental and calculated (B3PW91/6-311+G(3df)) vibrational spectra are in excellent agreement, and the IR spectrum is similar to that of the isoelectronic O3ClOClO2. Crystals of [N(CH3)4]2(O2SO)2SO2·SO2 (2) were isolated from solutions of [N(CH3)4]2SO4 in liquid SO2. The X-ray structure showed that 2 contained the [(O2SO)2SO2](2-) dianion. The characterized N(CH3)4(+) salts 1 and 2 are the first two members of the (SO4)(SO2)x(2-) class of sulfur oxydianions analogous to the well-known small cation salts of the SO4(SO3)x(2-) polysulfates.