Determination of ligand binding affinities for endogenous seven-transmembrane receptors using fluorometric microvolume assay technology

Fluorescent Tools for the Imaging of Dopamine D2 -Like Receptors

The family of dopamine D2 -like receptors represents an interesting target for a variety of neurological diseases, e. g. Parkinson's disease (PD), addiction, or schizophrenia. In this study we describe the synthesis of a new set of fluorescent ligands as tools for visualization of dopamine D2 -like receptors. Pharmacological characterization in radioligand binding studies identified UR-MN212 (20) as a high-affinity ligand for D2 -like receptors (pKi (D2long R)=8.24, pKi (D3 R)=8.58, pKi (D4 R)=7.78) with decent selectivity towards D1 -like receptors. Compound 20 is a neutral antagonist in a Go1 activation assay at the D2long R, D3 R, and D4 R, which is an important feature for studies using whole cells. The neutral antagonist 20, equipped with a 5-TAMRA dye, displayed rapid association to the D2long R in binding studies using confocal microscopy demonstrating its suitability for fluorescence microscopy. Furthermore, in molecular brightness studies, the ligand's binding affinity could be determined in a single-digit nanomolar range that was in good agreement with radioligand binding data. Therefore, the fluorescent compound can be used for quantitative characterization of native D2 -like receptors in a broad variety of experimental setups.

Shedding Light on the D1 -Like Receptors: A Fluorescence-Based Toolbox for Visualization of the D1 and D5 Receptors

Dopamine D1 -like receptors are the most abundant type of dopamine receptors in the central nervous system and, even after decades of discovery, still highly interesting for the study of neurological diseases. We herein describe the synthesis of a new set of fluorescent ligands, structurally derived from D1 R antagonist SCH-23390 and labeled with two different fluorescent dyes, as tool compounds for the visualization of D1 -like receptors. Pharmacological characterization in radioligand binding studies identified UR-NR435 (25) as a high-affinity ligand for D1 -like receptors (pKi (D1 R)=8.34, pKi (D5 R)=7.62) with excellent selectivity towards D2 -like receptors. Compound 25 proved to be a neutral antagonist at the D1 R and D5 R in a Gs heterotrimer dissociation assay, an important feature to avoid receptor internalization and degradation when working with whole cells. The neutral antagonist 25 displayed rapid association and complete dissociation to the D1 R in kinetic binding studies using confocal microscopy verifying its applicability for fluorescence microscopy. Moreover, molecular brightness studies determined a single-digit nanomolar binding affinity of the ligand, which was in good agreement with radioligand binding data. For this reason, this fluorescent ligand is a useful tool for a sophisticated characterization of native D1 receptors in a variety of experimental setups.

A novel immobilization fluorescence capillary analysis method and its applications

Fluorescence capillary analysis (FCA) realizes trace-level analysis of micro-volume samples; it is easy to operate, extremely low in analytical cost and can significantly lessen environmental pollution from analytical chemistry waste. FCA has the characteristics of green analytical chemistry and has been applied in clinical, biochemical, pharmaceutical, food safety and other fields. FCA basically involves a micro-volume glass capillary, a capillary holder and an ordinary fluorescence detector. The capillary is not only a container for chemical reaction and detection but also functions as a carrier to immobilize enzymes, gene probes or reagents; it can be used repeatedly or can be disposable. In analysis, the capillary which is modified with functional reagents sucks in a measured liquid for the reaction and is then inserted into the holder within the fluorescent detector for measurement. The immobilized FCA method has been successfully used in the determination of reduced coenzyme I, ethanol in liqueur, lactic acid in dairy products, pyruvic acid and glucose in serum, trace-level sulfated bile acid in urine, the ratio of pyruvic/lactic acid in serum, and pyruvic acid in cells as well as in DNA end-labeling and dyeing methods. Further, FCA can also be extended to capillary arrays to complete multipurpose simultaneous determinations and can be combined with mobile phones as fluorescence detectors for use in mobile health analytical technology. FCA will produce considerable social benefits in medicine, pharmacy, fermentation of food, environmental protection and other fields. Therefore, the relevant contents are presented in this tutorial review.

High-Throughput Screening with HyperCyt® Flow Cytometry to Detect Small Molecule Formylpeptide Receptor Ligands

High-throughput flow cytometry (HTFC), enabled by faster automated sample processing, represents a promising high- content approach for compound library screening. HyperCyt® is a recently developed automated HTFC analysis system by which cell samples are rapidly aspirated from microplate wells and delivered to the flow cytometer. The formylpeptide receptor (FPR) family of G protein–coupled receptors contributes to the localization and activation of tissue-damaging leukocytes at sites of chronic inflammation. Here, the authors describe development and application of an HTFC screening approach to detect potential anti-inflammatory compounds that block ligand binding to FPR. Using a homogeneous no-wash assay, samples were routinely processed at 1.5 s/well (~2500 cells analyzed/sample), allowing a 96-well plate to be processed in less than 2.5 min. Assay sensitivity and accuracy were validated by detection of a previously documented active compound with relatively low FPR affinity (sulfinpyrazone, inhibition constant [Ki]=14 μM) from among a collection of 880 compounds in the Prestwick Chemical Library. The HyperCyt® system was therefore demonstrated to be a robust, sensitive, and highly quantitative method with which to screen lead compound libraries in a 96-well format.

Application of the mirrorball high-sensitivity cytometer to multiplexed assays for antibody drug discovery

Highly sensitive, high-throughput assay technologies are required for the identification of antibody therapeutics. Multiplexed assay systems are particularly advantageous because they allow evaluation of several parameters within 1 well, increasing throughput and reducing hands-on laboratory time. The mirrorball (TTP Labtech), using high-throughput fluorometric microvolume assay technology, offers simultaneous scanning with up to 3 lasers as well as laser scatter detection. This makes the mirrorball especially suitable for the development of highly sensitive and multiplexed assays. We have developed bead- and cell-based binding assays that demonstrate how the multilaser capability of the mirrorball can be exploited to enhance assay sensitivity. In addition, using the multilaser simultaneous scanning capability, we have established multiplexed cytokine quantitation assays and antibody-cell binding assays. Our results demonstrate the potential utility of this technology to improve the sensitivity and efficiency of biologics screening, resulting in streamlining of the lead antibody selection process.

Confocal detection of planar homogeneous and heterogeneous immunosorbent assays

Optically sectioned detection of fluorescence immunoassays using a confocal microscope enables the creation of both homo- and heterogeneous planar format assays. We report a set assays requiring optically sectioned detection using a model system and analysis procedures for separating signals of a surface layer from an overlying solution. A model sandwich assay with human immunoglobulin G as the target antigen is created on a glass substrate. The prepared surfaces are exposed to antigen and a FITC-labeled secondary antibody. The resulting preparations are either read directly to provide a homogeneous assay or after wash steps, giving a heterogeneous assay. The simplicity of the object shapes arising from the planar format makes the decomposition of analyte signals from the thin film bound to the surface and overlayer straightforward. Measured response functions of the thin film and overlayer fit well to the Cauchy-Lorentz and cumulative Cauchy-Lorentz functions, respectively, enabling the film and overlayer to be separated. Under the conditions used, the detection limits for the homogeneous and heterogeneous forms of the assay are 2.2 and 5.5 ng/ml, respectively. Planar format, confocally read fluorescence assays enable wash-free detection of antigens and should be applicable to a wide range of assays involving surface-bound species.

Development of a Homogeneous High-Throughput Live-Cell G-Protein-Coupled Receptor Binding Assay

The measurement of ligand receptor binding parameters for G-protein-coupled receptors is indispensable in the drug discovery process. Traditional ligand receptor binding assays require scale-up of cells and membrane preparations, which is an expensive and time-consuming process. In this report, the authors describe the development of a homogeneous live-cell binding assay for GPCRs using a fluorophore-labeled nonpeptide ligand. The model assay used Cy3B-labeled telenzepine and Chinese hamster ovary cells expressing M1 muscarinic acetylcholine receptors. This homogeneous live-cell fluorescence binding assay format is superior to the traditional binding methods because it measures binding of a ligand to intact receptors on living cells. The assay requires no washing or separation steps, thereby allowing a real-time kinetic readout for the determination of ligand association and dissociation from the intact receptors. The results also suggest that miniaturization is feasible without compromising the data quality. ( Journal of Biomolecular Screening 2008:748-754)

Recombinant Kv channels at the membrane of Escherichia coli bind specifically agitoxin2

Potassium voltage-gated channels (Kv) are considered as molecular targets in a number of serious neuronal, immune, and cardiac disorders. Search for efficient low-molecular weight modulators of Kv channel function provides a basis for the development of an appropriate therapy for various Kv-mediated diseases. We report here on a new bacterial cell-based system, which is suitable for study of interactions between ligands and ligand-binding sites of eukaryotic Kv1.3 and Kv1.1 channels. To create this system, high-level expression of KcsA-Kv1.3 and KcsA-Kv1.1 hybrid proteins (ligand-binding sites of Kv1.3 or Kv1.1 fused with prokaryotic KcsA potassium channel) was achieved in the plasma membrane of Escherichia coli. An efficient procedure of E. coli conversion to intact spheroplasts was developed. We demonstrate that fluorescently labeled agitoxin 2 binds specifically to high-affinity and lower-affinity sites of KcsA-Kv1.3 and KcsA-Kv1.1, respectively, at the membrane of spheroplasts. Number of binding sites per cell is estimated to be (1.0 +/- 0.6) x 10(5) and (0.3 +/- 0.2) x 10(5) for KcsA-Kv1.3- and KcsA-Kv1.1-presenting cells, respectively, that allows reliable detection of ligand-receptor interactions by confocal laser scanning microscopy. This bacterial cell-based system is intended for screening of ligands to membrane-embedded pharmaceutical targets.

A High-Throughput Hybridoma Selection Method Using Fluorometric Microvolume Assay Technology

Monoclonal antibodies (mAb) are not only useful reagents but also represent a promising type of therapeutics due to their high affinity and exquisite specificity for their antigens. A critical step in mAb generation is to identify antigen-specific antibodies. Although enzyme-linked immunosorbent assay (ELISA) has been broadly applied for antibody selection against secreted antigens, an inherent disadvantage for ELISA is the difficulty in identifying antibodies that recognize the native conformation of cell surface antigens. To overcome this drawback, the authors have developed a high-throughput cell-based antibody binding assay using fluorometric microvolume assay technology (FMAT). This method offers a homogeneous assay for detection of antibody binding to its antigen on the cell surface. To distinguish antibodies that bind to antigen on the cell surface from those that bind nonspecifically to cells, the binding is assessed using both antigen-expressing cells and related cells devoid of the antigen expression. This assay can detect antibodies at a concentration as low as 5 ng/mL and cell surface antigen as low as 9000 copies per cell. Results demonstrate that the FMAT method provides a sensitive and homogeneous assay to detect antibody binding to cell surface antigens and is amenable for high-throughput hybridoma selection. ( Journal of Biomolecular Screening 2008:210-217)

An intracellular allosteric site for a specific class of antagonists of the CC chemokine G protein-coupled receptors CCR4 and CCR5

A novel mechanism for antagonism of the human chemokine receptors CCR4 and CCR5 has been discovered with a series of small-molecule compounds that seems to interact with an allosteric, intracellular site on the receptor. The existence of this site is supported by a series of observations: 1) intracellular access of these antagonists is required for their activity; 2) specific, saturable binding of a radiolabeled antagonist requires the presence of CCR4; and 3) through engineering receptor chimeras by reciprocal transfer of C-terminal domains between CCR4 and CCR5, compound binding and the selective structure-activity relationships for antagonism of these receptors seem to be associated with the integrity of that intracellular region. Published antagonists from other chemical series do not seem to bind to the novel site, and their interaction with either CCR4 or CCR5 is not affected by alteration of the C-terminal domain. The precise location of the proposed binding site remains to be determined, but the known close association of the C-terminal domain, including helix 8, as a proposed intracellular region that interacts with transduction proteins (e.g., G proteins and beta-arrestin) suggests that this could be a generic allosteric site for chemokine receptors and perhaps more broadly for class A G protein-coupled receptors. The existence of such a site that can be targeted for drug discovery has implications for screening assays for receptor antagonists, which would need, therefore, to consider compound properties for access to this intracellular site.

Development of fluorescence-linked immunosorbent assay for high throughput screening of interferon-gamma

BACKGROUND

Human interferon-gamma (hIFN-gamma) is produced by lymphocytes and has a variety of biological properties. Measurement of hIFN-gamma is widely used for various immunological responses for allergic or autoimmune diseases. Enzyme-linked immunosorbent assay (ELISA) is an established immunoassay used to quantify cellular metabolites or cytokines. ELISA requires many incubation and wash steps and is not practically suitable for screening large numbers of samples.

METHODS

We have developed a fluorescence-linked immunosorbent assay (FLISA) method for the detection of hIFN-gamma. We measured the 50% inhibitory concentration (IC50) value of the hIFN-gamma production by interleukin (IL)-18 binding protein and anti-IL-18 monoclonal antibody. The IC50 described by FLISA was compared with that by ELISA.

RESULTS

We developed a new system for measuring hIFN-gamma using Allophycocyanine (APC) fluorescent protein and compared it with the previous method using Cy5.5. The proposed FLISA had a smaller coefficient of variation than ELISA, and the means of coefficient of variation using the same samples measured by ELISA and FLISA were, respectively, 11.1% and 3.8%, suggesting that the edge effect often giving non-specific results may be smaller in FLISA than in ELISA.

CONCLUSIONS

The improved FLISA system proposed is ideally suited for efficient measurements of hIFN-gamma. This homogeneous and multiplex method will be a powerful tool for high throughput screening for drug discovery research.

Receptor–ligand binding assays: Technologies and Applications

Receptor-ligand interactions play a crucial role in biological systems and their measurement forms an important part of modern pharmaceutical development. Numerous assay formats are available that can be used to screen and quantify receptor ligands. In this review, we give an overview over both radioactive and non-radioactive assay technologies with emphasis on the latter. While radioreceptor assays are fast, easy to use and reproducible, their major disadvantage is that they are hazardous to human health, produce radioactive waste, require special laboratory conditions and are thus rather expensive on a large scale. This has led to the development of non-radioactive assays based on optical methods like fluorescence polarization, fluorescence resonance energy transfer or surface plasmon resonance. In light of their application in high-throughput screening environments, there has been an emphasis on so called "mix-and-measure" assays that do not require separation of bound from free ligand. The advent of recombinant production of receptors has contributed to the increased availability of specific assays and some aspects of the expression of recombinant receptors will be reviewed. Applications of receptor-ligand binding assays described in this review will relate to screening and the quantification of pharmaceuticals in biological matrices.

Detection methods of microsphere based single-step bioaffinity and in vitro diagnostics assays

Microspheres provide a solid phase substrate for bioaffinity binding similar to the walls of traditional test tubes and the wells of microtiter plates. The coated microsphere concentrates analyte molecules in the reaction volume on its surface. When the bioaffinity binding reaction has reached an equilibrium, the local concentration of the analyte in close proximity of the microsphere is orders of magnitude higher than the concentration of the analyte in the total reaction volume. The preparation and quality control of microspheres coated with bioactive material is less costly and labour intensive when compared to test tube or microwell plate coating procedures. In addition, the cost for logistics and transportation of microsphere reagents is lower than that of coated tubes or plates. Moreover, microspheres can be easily used in miniaturised assay formats and several different detection schemes can be employed in the measurement of microsphere-based assays. Several different types of microspheres are commercially available. The microspheres can be manufactured in different sizes from many materials, such as polystyrene, acrylate, and glass. The surface of the microspheres can be activated to enable covalent binding of biomolecules. Further, the microspheres may contain internal fluorochrome or magnetic material, for identification or separation purposes. In this paper we review different assay formats for single-step measurement of bioaffinity assays employing microspheres. The term single-step is used to describe assays where all reagents and the sample are mixed, incubated and measured without separate washing steps.

Synthesis and pharmacological activity of fluorescent histamine H1 receptor antagonists related to mepyramine

Fluorescently labeled histamine H(1) receptor antagonists were synthesized starting from N-demethylmepyramine by introduction of omega-aminoalkyl chains (2-8 methylene groups in length) followed by derivatization of the terminal NH(2) group with various fluorophores (fluorescein, naphthofluorescein, rhodamine, tetramethylrhodamine, BODIPY, dansyl, and nitrobenzoxadiazole (NBD)). On the isolated guinea pig ileum and in a Ca(2+) assay on U373MG human glioblastoma cells the highest H(1) antagonistic activities were found in 5- and 6-carboxyfluorescein labeled compounds with hexa- and octamethylene spacers and in an analogous NBD-aminohexanoyl derivative (pA(2) or pK(B) values in the range: 8.3-9.0; compared to 9.3-9.4 for mepyramine).

Imaging and analysis of immobilized particle arrays

An automated imaging system was developed to quantify fluorescence signals from particles immobilized on hydrogel-coated slides. Arrays of submicrometer-diameter particles were printed with up to 600 particles/spot. The slides were read under 20x magnification without cover slips. Software was written to image individual spots and measure the median particle fluorescence in each spot. To locate array spots, an alignment program made use of two fiducial grids of fluorescent reference particles at either end of the slide. Focusing was adjusted locally using spots of reference particles located at the centers of focusing neighborhoods. The response was linear across a two-decade range, and the precision of readings was better than 5% down to approximately 1000 fluors/particle. Exposure times varied with signal intensity, reaching 1 s at the lowest levels of fluorescence. Data demonstrate feasibility for measuring fluorescence from immobilized particle arrays on an automated microscope with accuracy and precision similar to fluorescence measurements of microparticles with a flow cytometer. This work provides automation of imaging and analysis procedures necessary for development of immobilized particle arrays as an analytical platform that combines advantageous features of both planar and suspension arrays.

Oncology drug discovery applications using the FMAT 8100 HTS system

High-throughput screening (HTS) for potential anticancer agents requires a broad portfolio of assay platforms that may include kinase enzyme assays, protein-protein binding assays, and functional cell-based apoptosis assays. The authors have explored the use of fluorometric microvolume assay technology (the FMAT 8100 HTS System) in three distinct homogeneous HTS assays: (1). a Src tyrosine kinase enzyme assay, (2). a Grb2-SH2 protein-peptide interaction assay, and (3). an annexin V binding apoptosis assay. Data obtained from all three assays suggest that the FMAT system should facilitate the implementation of homogeneous assays for a wide variety of molecular targeted and cell-based screens.

1,536-Well Assay Development and Screening Using Whole Cell Displacement Binding and Laser Scanning Imaging

A screen of a GPCR against Pharmacopeia's combinatorial libraries was performed using 1,536-well plates in a 1.5-microl assay volume with an LSI that was specially modified to enable detection at these volumes. The screen encompassed approximately 4 x 10(6) compounds. The assay uses a CHO cell line that expresses human CXCR1. The plate format chosen was the Corning 1536 low-profile wafer plate. The performance of the screen is evaluated, and the necessity to obtain cytotoxicity data from the same well is described.

Measurement of interferon-gamma by high-throughput fluorometric microvolume assay technology system

Interferon gamma (IFN-gamma) has various immunoregulatory effects and its measurement is widely used for monitoring immune response in many clinical trials for cancer vaccines. In this study, we developed a fluorescent-linked immunosorbent assay (FLISA) for the measurement of IFN-gamma. The FLISA can accurately measure IFN-gamma concentrations and the linear dynamic range of standard curve is 15.6-2000 pg/ml (2.1 log range). Because the FLISA needs only a small amount of antibodies and there is no washing process, it is able to reduce hands-on time and running costs compared with traditional enzyme-linked immunosorbent assay (ELISA). The FLISA can be readily performed in both 96- and 384-well plates, and up to 60 plates can be handled automatically by a robotic arm. Measurement of IFN-gamma by fluorometric microvolume assay technology (FMAT) may be a high-throughput screening method for a large number of samples.

Galanin and galanin receptor expression in neuroblastic tumours: correlation with their differentiation status

Neuroblastoma and its benign differentiated counterpart, ganglioneuroma, are paediatric neuroblastic tumours arising in the sympathetic nervous system. Their broad spectrum of clinical virulence is mainly related to heterogeneous biologic background and tumour differentiation. Neuroblastic tumours synthesize various neuropeptides acting as neuromodulators. Previous studies suggested that galanin plays a role in sympathetic tissue where it could be involved in differentiation and development. We investigated the expression and distribution of galanin and its three known receptors (Gal-R1, Gal-R2, Gal-R3) in 19 samples of neuroblastic tumours tissue by immunohistochemistry, in situ hybridization and fluorescent-ligand binding. This study provides clear evidence for galanin and galanin receptor expression in human neuroblastic tumours. The messengers coding for galanin, Gal-R1 and -R3 were highly expressed in neuroblastoma and their amount dramatically decreased in ganglioneuroma. In contrast, Gal-R2 levels remained unchanged. Double labelling studies showed that galanin was mainly co-expressed with its receptors whatever the differentiation stage. In neuroblastic tumours, galanin might promote cell-survival or counteract neuronal differentiation through the different signalling pathways mediated by galanin receptors. Finally, our results suggest that galanin influences neuroblastoma growth and development as an autocrine/paracrine modulator. These findings suggest potential critical implications for galanin in neuroblastic tumours development.

Single-molecule detection technologies in miniaturized high throughput screening: binding assays for g protein-coupled receptors using fluorescence intensity distribution analysis and fluorescence anisotropy

G Protein-coupled receptors (GPCRs) represent one of the most important target classes for drug discovery. Various assay formats are currently applied to screen large compound libraries for agonists or antagonists. However, the development of nonradioactive, miniaturizable assays that are compatible with the requirements of ultra-high throughput screening (uHTS) has so far been slow. In this report we describe homogeneous fluorescence-based binding assays that are highly amenable to miniaturization. Fluorescence intensity distribution analysis (FIDA) is a single-molecule detection method that is sensitive to brightness changes of individual particles, such as those induced by binding of fluorescent ligands to membrane particles with multiple receptor sites. As a confocal detection technology, FIDA inherently allows reduction of the assay volume to the microliter range and below without any loss of signal. Binding and displacement experiments are demonstrated for various types of GPCRs, such as chemokine, peptide hormone, or small-molecule ligand receptors, demonstrating the broad applicability of this method. The results correlate quantitatively with radioligand binding data. We compare FIDA with fluorescence anisotropy (FA), which is based on changes of molecular rotation rates upon binding of fluorescent ligands to membranes. While FA requires a higher degree of binding, FIDA is sensitive down to lower levels of receptor expression. Both methods are, within these boundary conditions, applicable to uHTS.

High-throughput screening: new technology for the 21st century

New technologies in high-throughput screening have significantly increased throughput and reduced assay volumes. Key advances over the past few years include new fluorescence methods, detection platforms and liquid-handling technologies. Screening 100,000 samples per day in miniaturized assay volumes will soon become routine. Furthermore, new technologies are now being applied to information-rich cell-based assays, and this is beginning to remove one of the key bottlenecks downstream from primary screening.

Homogeneous Cell- and Bead-Based Assays for High Throughput Screening Using Fluorometric Microvolume Assay Technology

High throughput drug screening has become a critical component of the drug discovery process. The screening of libraries containing hundreds of thousands of compounds has resulted in a requirement for assays and instrumentation that are amenable to nonradioactive formats and that can be miniaturized. Homogeneous assays that minimize upstream automation of the individual assays are also preferable. Fluorometric microvolume assay technology (FMAT) is a fluorescence-based platform for the development of nonradioactive cell- and bead-based assays for HTS. This technology is plate format-independent, and while it was designed specifically for homogeneous ligand binding and immunological assays, it is amenable to any assay utilizing a fluorescent cell or bead. The instrument fits on a standard laboratory bench and consists of a laser scanner that generates a 1 mm(2) digitized image of a 100-µmm deep section of the bottom of a microwell plate. The instrument is directly compatible with a Zymark Twistertrade mark (Zymark Corp., Hopkinton, MA) for robotic loading of the scanner and unattended operation in HTS mode. Fluorescent cells or beads at the bottom of the well are detected as localized areas of concentrated fluorescence using data processing. Unbound flurophore comprising the background signal is ignored, allowing for the development of a wide variety of homogeneous assays. The use of FMAT for peptide ligand binding assays, immunofluorescence, apoptosis and cytotoxicity, and bead-based immunocapture assays is described here, along with a general overview of the instrument and software.

Paramagnetic proteoliposomes containing a pure, native, and oriented seven-transmembrane segment protein, CCR5

Seven-transmembrane segment, G protein-coupled receptors play central roles in a wide range of biological processes, but their characterization has been hindered by the difficulty of obtaining homogeneous preparations of native protein. We have created paramagnetic proteoliposomes containing pure and oriented CCR5, a seven-transmembrane segment protein that serves as the principal coreceptor for human immunodeficiency virus (HIV-1). The CCR5 proteoliposomes bind the HIV-1 gp120 envelope glycoprotein and conformation-dependent antibodies against CCR5. The binding of gp120 was enhanced by a soluble form of the other HIV-1 receptor, CD4, but did not require additional cellular proteins. Paramagnetic proteoliposomes are uniform in size, stable in a broad range of salt concentrations and pH, and can be used in FACS and competition assays typically applied to cells. Integral membrane proteins can be inserted in either orientation into the liposomal membrane. The magnetic properties of these proteoliposomes facilitate rapid buffer exchange useful in multiple applications. As an example, the CCR5-proteoliposomes were used to select CCR5-specific antibodies from a recombinant phage display library. Thus, paramagnetic proteoliposomes should be useful tools in the analysis of membrane protein interactions with extracellular and intracellular ligands, particularly in establishing screens for inhibitors.