Involvement of tail domains in regulation of Dictyostelium myosin II

Stretching actin filaments within cells enhances their affinity for the myosin II motor domain

To test the hypothesis that the myosin II motor domain (S1) preferentially binds to specific subsets of actin filaments in vivo, we expressed GFP-fused S1 with mutations that enhanced its affinity for actin in Dictyostelium cells. Consistent with the hypothesis, the GFP-S1 mutants were localized along specific portions of the cell cortex. Comparison with rhodamine-phalloidin staining in fixed cells demonstrated that the GFP-S1 probes preferentially bound to actin filaments in the rear cortex and cleavage furrows, where actin filaments are stretched by interaction with endogenous myosin II filaments. The GFP-S1 probes were similarly enriched in the cortex stretched passively by traction forces in the absence of myosin II or by external forces using a microcapillary. The preferential binding of GFP-S1 mutants to stretched actin filaments did not depend on cortexillin I or PTEN, two proteins previously implicated in the recruitment of myosin II filaments to stretched cortex. These results suggested that it is the stretching of the actin filaments itself that increases their affinity for the myosin II motor domain. In contrast, the GFP-fused myosin I motor domain did not localize to stretched actin filaments, which suggests different preferences of the motor domains for different structures of actin filaments play a role in distinct intracellular localizations of myosin I and II. We propose a scheme in which the stretching of actin filaments, the preferential binding of myosin II filaments to stretched actin filaments, and myosin II-dependent contraction form a positive feedback loop that contributes to the stabilization of cell polarity and to the responsiveness of the cells to external mechanical stimuli.

Expression of Y53A-actin in Dictyostelium disrupts the cytoskeleton and inhibits intracellular and intercellular chemotactic signaling

We showed previously that phosphorylation of Tyr(53), or its mutation to Ala, inhibits actin polymerization in vitro with formation of aggregates of short filaments, and that expression of Y53A-actin in Dictyostelium blocks differentiation and development at the mound stage (Liu, X., Shu, S., Hong, M. S., Levine, R. L., and Korn, E. D. (2006) Proc. Natl. Acad. Sci. U.S.A. 103, 13694-13699; Liu, X., Shu, S., Hong, M. S., Yu, B., and Korn, E. D. (2010) J. Biol. Chem. 285, 9729-9739). We now show that expression of Y53A-actin, which does not affect cell growth, phagocytosis, or pinocytosis, inhibits the formation of head-to-tail cell streams during cAMP-induced aggregation, although individual amoebae chemotax normally. We show that expression of Y53A-actin causes a 50% reduction of cell surface cAMP receptors, and inhibits cAMP-induced increases in adenylyl cyclase A activity, phosphorylation of ERK2, and actin polymerization. Trafficking of vesicles containing adenylyl cyclase A to the rear of the cell and secretion of the ACA vesicles are also inhibited. The actin cytoskeleton of cells expressing Y53A-actin is characterized by numerous short filaments, and bundled and aggregated filaments similar to the structures formed by copolymerization of purified Y53A-actin and wild-type actin in vitro. This disorganized actin cytoskeleton may be responsible for the inhibition of intracellular and intercellular cAMP signaling in cells expressing F-Y53A-actin.

Mutation of actin Tyr-53 alters the conformations of the DNase I-binding loop and the nucleotide-binding cleft

All but 11 of the 323 known actin sequences have Tyr at position 53, and the 11 exceptions have the conservative substitution Phe, which raises the following questions. What is the critical role(s) of Tyr-53, and, if it can be replaced by Phe, why has this happened so infrequently? We compared the properties of purified endogenous Dictyostelium actin and mutant constructs with Tyr-53 replaced by Phe, Ala, Glu, Trp, and Leu. The Y53F mutant did not differ significantly from endogenous actin in any of the properties assayed, but the Y53A and Y53E mutants differed substantially; affinity for DNase I was reduced, the rate of nucleotide exchange was increased, the critical concentration for polymerization was increased, filament elongation was inhibited, and polymerized actin was in the form of small oligomers and imperfect filaments. Growth and/or development of cells expressing these actin mutants were also inhibited. The Trp and Leu mutations had lesser but still significant effects on cell phenotype and the biochemical properties of the purified actins. We conclude that either Tyr or Phe is required to maintain the functional conformations of the DNase I-binding loop (D-loop) in both G- and F-actin, and that the conformation of the D-loop affects not only the properties that directly involve the D-loop (binding to DNase I and polymerization) but also allosterically modifies the conformation of the nucleotide-binding cleft, thus increasing the rate of nucleotide exchange. The apparent evolutionary "preference" for Tyr at position 53 may be the result of Tyr allowing dynamic modification of the D-loop conformation by phosphorylation (Baek, K., Liu, X., Ferron, F., Shu, S., Korn, E. D., and Dominguez, R. (2008) Proc. Natl. Acad. Sci. U.S.A. 105, 11748-11753) with effects similar, but not identical, to those of the Ala and Glu mutations.

Visualizing myosin-actin interaction with a genetically-encoded fluorescent strain sensor

Many proteins have been shown to undergo conformational changes in response to externally applied force in vitro, but whether the force-induced protein conformational changes occur in vivo remains unclear. To reveal the force-induced conformational changes, or strains, within proteins in living cells, we have developed a genetically encoded fluorescent "strain sensor," by combining the proximity imaging (PRIM) technique, which uses spectral changes of 2 GFP molecules that are in direct contact, and myosin-actin as a model system. The developed PRIM-based strain sensor module (PriSSM) consists of the tandem fusion of a normal and circularly permuted GFP. To apply strain to PriSSM, it was inserted between 2 motor domains of Dictyostelium myosin II. In the absence of strain, the 2 GFP moieties in PriSSM are in contact, whereas when the motor domains are bound to F-actin, PriSSM has a strained conformation, leading to the loss of contact and a concomitant spectral change. Using the sensor system, we found that the position of the lever arm in the rigor state was affected by mutations within the motor domain. Moreover, the sensor was used to visualize the interaction between myosin II and F-actin in Dictyostelium cells. In normal cells, myosin was largely detached from F-actin, whereas ATP depletion or hyperosmotic stress increased the fraction of myosin bound to F-actin. The PRIM-based strain sensor may provide a general approach for studying force-induced protein conformational changes in cells.

Enzymatic Activity and Motility of Recombinant Arabidopsis Myosin XI, MYA1

We expressed recombinant Arabidopsis myosin XI (MYA1), in which the motor domain of MYA1 was connected to an artificial lever arm composed of triple helical repeats of Dictyostelium alpha-actinin, in order to understand its motor activity and intracellular function. The V(max) and K(actin) of the actin-activated Mg(2+) ATPase activity of the recombinant MYA1 were 50.7 Pi head(-1) s(-1) and 30.2 microM, respectively, at 25 degrees C. The recombinant MYA1 could translocate actin filament at the maximum velocity of 1.8 microm s(-1) at 25 degrees C in the in vitro motility assay. The value corresponded to a motility of 3.2 microm s(-1) for native MYA1 if we consider the difference in the lever arm length, and this value was very close to the velocity of cytoplasmic streaming in Arabidopsis hypocotyl epidermal cells. The extent of inhibition by ADP of the motility of MYA1 was similar to that of the well-known processive motor, myosin V, suggesting that MYA1 is a processive motor. The dissociation rate of the actin-MYA1-ADP complex induced by ATP (73.5 s(-1)) and the V(max) value of the actin-activated Mg(2+) ATPase activity revealed that MYA1 stays in the actin-bound state for about 70% of its mechanochemical cycle time. This high ratio of actin-bound states is also a characteristic of processive motors. Our results strongly suggest that MYA1 is a processive motor and involved in vesicle transport and/or cytoplasmic streaming.

A point mutation in the SH1 helix alters elasticity and thermal stability of myosin II

Movement generated by the myosin motor is generally thought to be driven by distortion of an elastic element within the myosin molecule and subsequent release of the resulting strain. However, the location of this elastic element in myosin remains unclear. The myosin motor domain consists of four major subdomains connected by flexible joints. The SH1 helix is the joint that connects the converter subdomain to the other domains, and is thought to play an important role in arrangements of the converter relative to the motor. To investigate the involvement of the SH1 helix in elastic distortion in myosin, we have introduced a point mutation into the SH1 helix of Dictyostelium myosin II (R689H), which in human nonmuscle myosin IIA causes nonsyndromic hereditary deafness, DFNA17. The mutation resulted in a significant impairment in motile activities, whereas actin-activated ATPase activity was only slightly affected. Single molecule mechanical measurements using optical trap showed that the step size was not shortened by the mutation, suggesting that the slower motility is caused by altered kinetics. The single molecule measurements demonstrated that the mutation significantly reduced cross-bridge stiffness. Motile activities produced by mixtures of wild-type and mutant myosins also suggested that the mutation affected the elasticity of myosin. These results suggest that the SH1 helix is involved in modulation of myosin elasticity, presumably by modulating the converter flexibility. Consistent with this, the mutation was also shown to reduce thermal stability and induce thermal aggregation of the protein, which might be implicated in the disease process.

The Shwachman-Bodian-Diamond syndrome gene encodes an RNA-binding protein that localizes to the pseudopod ofDictyosteliumamoebae during chemotaxis

The Shwachman-Bodian-Diamond syndrome (SBDS) is an autosomal disorder with multisystem defects. The Shwachman-Bodian-Diamond syndrome gene (SBDS), which contains mutations in a majority of SBDS patients, encodes a protein of unknown function, although it has been strongly implicated in RNA metabolism. There is also some evidence that it interacts with molecules that regulate cytoskeletal organization. Recently, it has been demonstrated by computer-assisted methods that the single behavioral defect of polymorphonuclear leukocytes (PMNs) of SBDS patients is the incapacity to orient correctly in a spatial gradient of chemoattractant. We considered using the social amoeba Dictyostelium discoideum, a model for PMN chemotaxis, an excellent system for elucidating the function of the SBDS protein. We first identified the homolog of SBDS in D. discoideum and found that the amino acids that are altered in human disease were conserved. Given that several proteins involved in chemotactic orientation localize to the pseudopods of cells undergoing chemotaxis, we tested whether the SBDS gene product did the same. We produced an SBDS-GFP chimeric in-frame fusion gene, and generated transformants either with multiple ectopic insertions of the fusion gene or multiple copies of a non-integrated plasmid carrying the fusion gene. In both cases, the SBDS-GFP protein was dispersed equally through the cytoplasm and pseudopods of cells migrating in buffer. However, we observed differential enrichment of SBDS in the pseudopods of cells treated with the chemoattractant cAMP, suggesting that the SBDS protein may play a role in chemotaxis. In light of these results, we discuss how SBDS might function during chemotaxis.

Biological, biochemical, and kinetic effects of mutations of the cardiomyopathy loop of Dictyostelium myosin II: importance of ALA400

The cardiomyopathy (CM)-loop of the heavy chain of class-II myosins begins with a highly conserved Arg residue (whose mutation in human beta-cardiac myosin II results in familial hypertrophic cardiomyopathy). The CM-loop of Dictyostelium myosin II (Arg397-Gln407) is essential for its biological functions and biochemical activities. We found that the CM-loop of smooth muscle myosin II substituted partially, and the CM-loop of beta-cardiac myosin II less well, for growth, capping of surface receptors and development, and the actin-activated MgATPase and in vitro motility activities of purified myosins. There was little correlation between the biochemical and biological activities of the two chimeras and 19 point mutants, but only the five mutants with k cat/K actin values equivalent to wild-type myosin supported essentially full biological function. The three point mutations of Arg397 equivalent to those that result in hypertrophic cardiomyopathy in humans had minimal biological effects and different biochemical effects. The A400V mutation rendered full-length wild-type myosin almost completely inactive, both in vitro and in vivo, and the reverse V400A mutation in the cardiac CM-loop chimera restored almost full activity, even though the sequence still differed from wild-type in 7 of 11 positions. Transient kinetic studies of acto-subfragment-1 (S1) showed that the chimeras and the Ala/Val, Val/Ala mutations do not affect the equilibrium or the association and dissociation rate constants for either ATP or ADP binding to acto-S1 or the rate of ATP-induced dissociation of acto-S1. We conclude that the Ala/Val, Val/Ala mutations affect the release of Pi from acto-S1.ADP.Pi. In addition, Val at position 400 substantially reduces the affinity of actin for S1 in the absence of nucleotide.

Blebbistatin and blebbistatin-inactivated myosin II inhibit myosin II-independent processes in Dictyostelium

Blebbistatin, a cell-permeable inhibitor of class-II myosins, was developed to provide a tool for studying the biologic roles of myosin II. Consistent with this use, we find that blebbistatin inhibits three myosin II-dependent processes in Dictyostelium (growth in suspension culture, capping of Con A receptors, and development to fruiting bodies) and does not inhibit growth on plates, which does not require myosin II. As expected, macropinocytosis (myosin I-dependent), contractile vacuole activity (myosin V-dependent), and phagocytosis (myosin VII-dependent), none of which requires myosin II, are not inhibited by blebbistatin in myosin II-null cells, but, unexpectedly, blebbistatin does inhibit macropinocytosis and phagocytosis by cells expressing myosin II. Expression of catalytically inactive myosin II in myosin II-null cells also inhibits macropinocytosis and phagocytosis. Both blebbistatin-inhibited myosin II and catalytically inactive myosin II form cytoplasmic aggregates, which may be why they inhibit myosin II-independent processes, but neither affects the distribution of actin filaments in vegetative cells or actin and myosin distribution in dividing or polarized cells. Blebbistatin also inhibits cell streaming and plaque expansion in myosin II-null cells. Our results are consistent with myosin II being the only Dictyostelium myosin that is inhibited by blebbistatin but also show that blebbistatin-inactivated myosin II inhibits some myosin II-independent processes and that blebbistatin inhibits other activities in the absence of myosin II.

Importance of the Converter Region for the Motility of Myosin as Revealed by the Studies on Chimeric Chara Myosins

A long alpha-helix in myosin head constitutes a lever arm together with light chains. It is known from X-ray crystallographic studies that the first three turns of this lever arm alpha-helix are inserted into the converter region of myosin. We previously showed that chimeric Chara myosin in which the motor domain of Chara myosin was connected to the lever arm alpha-helix of Dictyostelium myosin had motility far less than that expected for the motor domain of Chara myosin. Here, we replaced the inserted three turns of alpha-helix of Dictyostelium myosin with that of the Chara myosin and found that the replacement enhanced the motility 2.6-fold without changing the ATPase activity so much. The result clearly showed the importance of interaction between the converter region and the lever arm alpha-helix for the efficient motility of myosin.

Amino acids 519-524 of Dictyostelium myosin II form a surface loop that aids actin binding by facilitating a conformational change

Residues 519-524 of Dictyostelium myosin II form a small surface loop on the actin binding face, and have been suggested to bind directly to actin through high affinity hydrophobic interactions. To test this hypothesis, we have characterized mutant myosins that lack this loop in vivo and in vitro. A mutant myosin in which this loop was replaced by an Ala residue (delta519-524/+A) was non-functional in vivo. Replacement with a single Gly residue instead of Ala yielded partial function, suggesting that structural flexibility, rather than hydrophobicity, is the key feature of the loop. The in vivo phenotype of the mutant enabled us to identify a number of additional amino acid changes that restore function to the delta519-524/+A mutation. Intriguingly, many of these, including L596S, were located at some distances away from the 519-524 loop. We have also isolated suppressors for the L596S mutant myosin, which was not functional in vivo. The suppressors for delta519-524/+A and those for L596S showed complementary charge patterns. In ATPase assays, delta519-524/+A S1 showed very low activity and little enhancement by actin, whereas L596S S1 was hyper active and displayed enhanced affinity for actin. In motility assays, delta519-524/+A myosin released actin filaments upon addition of ATP and was unable to support movements. L596S myosin was also inactive, but in this case actin filaments stayed immobile even after the addition of ATP. Transient kinetic measurements demonstrated that delta519-524/+A S1 is not only slower than wild type to bind actin filaments, but also slower to dissociate from actin filaments. Based on these results, we concluded that the 519-524 loop is not a major actin binding site but aids actin binding by facilitating a critical conformational change.

DWWA, a novel protein containing two WW domains and an IQ motif, is required for scission of the residual cytoplasmic bridge during cytokinesis in Dictyostelium

We have identified a novel gene, dwwA, which is required for cytokinesis of Dictyostelium cells on solid surfaces. Its product, Dd WW domain containing protein A (DWWA), contains several motifs, including two WW domains, an IQ motif, a C2 domain, and a proline-rich region. On substrates, cells lacking dwwA were multinucleated and larger and flatter than wild-type cells due to their frequent inability to sever the cytoplasmic bridge connecting daughter cells after mitosis. When cultured in suspension, however, dwwA-null cells seemed to carry out cytokinesis normally via a process not driven by the shearing force arising from agitation of the culture. GFP-DWWA localized to the cell cortex and nucleus; analysis of the distributions of various truncation mutants revealed that the N-terminal half of the protein, which contains the C2 domain, is required for the cortical localization of DWWA. The IQ motif of DWWA binds calmodulin in vitro. Given that the scission process is also defective in calmodulin knockdown cells cultured on substrates (Liu et al., 1992), we propose that DWWA's multiple binding domains enable it to function as an adaptor protein, facilitating the scission process through the regulation of Ca(2+)/calmodulin-mediated remodeling of the actin cytoskeleton and/or modulation of membrane dynamics.

Requirement of domain-domain interaction for conformational change and functional ATP hydrolysis in myosin

Coordination between the nucleotide-binding site and the converter domain of myosin is essential for its ATP-dependent motor activities. To unveil the communication pathway between these two sites, we investigated contact between side chains of Phe-482 in the relay helix and Gly-680 in the SH1-SH2 helix. F482A myosin, in which Phe-482 was changed to alanine with a smaller side chain, was not functional in vivo. In vitro, F482A myosin did not move actin filaments and the Mg2+-ATPase activity of F482A myosin was hardly activated by actin. Phosphate burst and tryptophan fluorescence analyses, as well as fluorescence resonance energy transfer measurements to estimate the movements of the lever arm domain, indicated that the transition from the open state to the closed state, which precedes ATP hydrolysis, is very slow. In contrast, F482A/G680F doubly mutated myosin was functional in vivo and in vitro. The fact that a larger side chain at the 680th position suppresses the defects of F482A myosin suggests that the defects are caused by insufficient contact between side chains of Ala-482 and Gly-680. Thus, the contact between these two side chains appears to play an important role in the coordinated conformational changes and subsequent ATP hydrolysis.

Dictyostelium and Acanthamoeba myosin II assembly domains go to the cleavage furrow of Dictyostelium myosin II-null cells

How myosin II localizes to the cleavage furrow of dividing cells is largely unknown. We show here that a 283-residue protein, assembly domain (AD)1, corresponding to the AD in the tail of Dictyostelium myosin II assembles into bundles of long tubules when expressed in myosin II-null cells and localizes to the cleavage furrow of dividing cells. AD1 mutants that do not polymerize in vitro do not go to the cleavage furrow in vivo. An assembly-competent polypeptide corresponding to the C-terminal 256 residues of Acanthamoeba myosin II also goes to the cleavage furrow of Dictyostelium myosin II-null cells. When overexpressed in wild-type cells, AD1 colocalizes with endogenous myosin II (possibly as a copolymer) in interphase, motile, and dividing cells and under caps of Con A receptors but has no effect on myosin II-dependent functions. These results suggest that neither a specific sequence, other than that required for polymerization, nor interaction with other proteins is required for localization of myosin II to the cleavage furrow.

Design and functional analysis of actomyosin motor domain chimera proteins

To gain more structural and functional information on the actomyosin complexes, we have engineered chimera proteins carrying the entire Dictyostelium actin in the loop 2 sequence of the motor domain of Dictyostelium myosin II. Although the chimera proteins were unable to polymerize by themselves, addition of skeletal actin promoted polymerization. Electron microscopic observation demonstrated that the chimera proteins were incorporated into actin filaments, when copolymerized with skeletal actin. Copolymerization with skeletal actin greatly enhanced the MgATPase, while the chimera proteins without added skeletal actin hydrolyzed ATP at a very low rate. These results indicate that the actin part and the motor domain part of the chimera proteins are correctly folded, but the chimera proteins are structurally stressed so that efficient polymerization is inhibited.

Novel myosin heavy chain kinase involved in disassembly of myosin II filaments and efficient cleavage in mitotic dictyostelium cells

We have cloned a full-length cDNA encoding a novel myosin II heavy chain kinase (mhckC) from Dictyostelium. Like other members of the myosin heavy chain kinase family, the mhckC gene product, MHCK C, has a kinase domain in its N-terminal half and six WD repeats in the C-terminal half. GFP-MHCK C fusion protein localized to the cortex of interphase cells, to the cleavage furrow of mitotic cells, and to the posterior of migrating cells. These distributions of GFP-MHCK C always corresponded with that of myosin II filaments and were not observed in myosin II-null cells, where GFP-MHCK C was diffusely distributed in the cytoplasm. Thus, localization of MHCK C seems to be myosin II-dependent. Cells lacking the mhckC gene exhibited excessive aggregation of myosin II filaments in the cleavage furrows and in the posteriors of the daughter cells once cleavage was complete. The cleavage process of these cells took longer than that of wild-type cells. Taken together, these findings suggest MHCK C drives the disassembly of myosin II filaments for efficient cytokinesis and recycling of myosin II that occurs during cytokinesis.

Chimeras of Dictyostelium myosin II head and neck domains with Acanthamoeba or chicken smooth muscle myosin II tail domain have greatly increased and unregulated actin-dependent MgATPase activity

Phosphorylation of the regulatory light chain of Dictyostelium myosin II increases V(max) of its actin-dependent MgATPase activity about 5-fold under normal assay conditions. Under these assay conditions, unphosphorylated chimeric myosins in which the tail domain of the Dictyostelium myosin II heavy chain is replaced by either the tail domain of chicken gizzard smooth muscle or Acanthamoeba myosin II are 20 times more active because of a 10- to 15-fold increase in V(max) and a 2- to 7-fold decrease in apparent K(ATPase) and are only slightly activated by regulatory light chain phosphorylation. Actin-dependent MgATPase activity of the Dictyostelium/Acanthamoeba chimera is not affected by phosphorylation of serine residues in the tail whose phosphorylation completely inactivates wild-type Acanthamoeba myosin II. These results indicate that the actin-dependent MgATPase activity of these myosins involves specific, tightly coupled, interactions between head and tail domains.

Green fluorescent protein and epitope tag fusion vectors for Dictyostelium discoideum

We have constructed expression vectors for Dictyostelium discoideum which encode a green fluorescent protein (GFP) sequence upstream of a multicloning site for introduction of sequences of interest. Insertion of cDNAs into the multicloning site results in expression of fusion protein bearing an amino- or carboxyl-terminal GFP tag which can be used for fluorescent localization studies in Dictyostelium cells. A parallel construct fuses a FLAG epitope tag at the amino terminus of expressed protein. Each fusion cartridge was placed either in a G418-resistance vector allowing transactivated Ddp2-based extrachromosomal replication or in a vector allowing autonomous Ddp1-based replication. Distinct differences in expression stability were observed in the two vector types. When GFP-expressing cells were analyzed by fluorescence microscopy, significant cell-to-cell variability in expression level was observed when expression was based on the Ddp2 vector, while less cell-to-cell variation in expression level was observed when the Ddp1 backbone was used for expression.