Characteristics of catalytic destruction of dichloromethane and ethyl acetate mixture over HxPO4-RuOx/CeO2 catalyst

Catalytic destruction is an ascendant technology for the abatement of volatile organic compounds (VOCs) originating from solvent-based industrial processes. The varied composition tends to influence each VOC's catalytic behavior in the reaction mixture. We investigated the catalytic destruction of multi-component VOCs including dichloromethane (DCM) and ethyl acetate (EA), as representatives from pharmaceutical waste gases, over co-supported HxPO4-RuOx/CeO2 catalyst. A mutual inhibitory effect relating to concentrations because of competitive adsorption was verified in the binary VOCs oxidation and EA posed a more negative effect on DCM oxidation owing to EA's superior adsorption capacity. Preferential adsorption of EA on acidic sites (HxPO4/CeO2) promoted DCM activation on basic sites (O2-) and the dominating EA oxidation blocked DCM's access to oxidation centers (RuOx/CeO2), resulting in boosted monochloromethane yield and increased chlorine deposition for DCM oxidation. The impaired redox ability of Ru species owing to chlorine deposition in turn jeopardized deep oxidation of EA and its by-products, leading to increased gaseous by-products such as acetic acid originating from EA pyrolysis. Notably, DCM at low concentration slightly promoted EA conversion at low temperatures with or without water, consistent with the enhanced EA adsorption in co-adsorption analyses. This was mainly due to that DCM impeded the shielding effect of hydrolysate deposition from rapid EA hydrolysis depending on the decreased acidity. Moreover, water benefited EA hydrolysis but decreased CO2 selectivity while the generated water derived from EA was likely to affect DCM transformation. This work may provide theoretical guidance for the promotion of applied catalysts toward industrial applications.

Oxidation of Methanol and Dichloromethane on TiO2-CeO2-CuO, TiO2-CeO2 and TiO2-CuO@VUKOPOR®A Ceramic Foams

The application-attractive form of TiO₂, CeO₂ and CuO-based open-cell foam supported catalysts was designed to investigate their catalytic performance in oxidation of two model volatile organic compounds-methanol and dichloromethane. TiO₂-CeO₂, TiO₂-CuO and TiO₂-CeO₂-CuO catalysts as thin films were deposited on VUKOPOR^®A ceramic foam using a reverse micelles-controlled sol-gel method, dip-coating and calcination. Three prepared catalytic foams were investigated via light-off tests in methanol and dichloromethane oxidation in the temperature range of 45-400 °C and 100-500 °C, respectively, at GHSV of 11, 600 h^-1, which fits to semi-pilot/industrial conditions. TiO₂-CuO@VUKOPOR^®A foam showed the best catalytic activity and CO₂ yield in methanol oxidation due to its low weak Lewis acidity, high weak basicity and easily reducible CuO species and proved good catalytic stability within 20 h test. TiO₂-CeO₂-CuO@VUKOPOR^®A foam was the best in dichloromethane oxidation. Despite of its lower catalytic activity compared to TiO₂-CeO₂@VUKOPOR^®A foam, its highly-reducible -O-Cu-Ce-O- active surface sites led to the highest CO₂ yield and the highest weak Lewis acidity contributed to the highest HCl yield. This foam also showed the lowest amount of chlorine deposits.

Facile Synthesis of NiO-CuO/Activated Carbon Nanocomposites for Use in the Removal of Lead and Cadmium Ions from Water

In this work, activated carbon (AC) was synthesized and then modified using nickel(II) oxide and copper(II) oxide. Pure-AC, 10, 20, 30, and 40 wt % nanohybrid NiO-CuO/AC nanocomposites (χ-NC/AC NCs) were characterized using XRD, IR, EDS, surface area, and FE-SEM techniques. Furthermore, the adsorbents obtained were tested for their ability to remove hazardous Pb(II) and Cd(II) from water. The fabricated x-NC/AC NC adsorbents showed the highest adsorptive performance toward the adsorption of Pb(II) and Cd(II) from water. The 30-NC/AC NC adsorbent showed the complete removal of Pb(II) at pH = 5 and Cd(II) at pH = 7 within 30 min. Overall, the obtained superior experimental results suggest that the adsorptive performance of AC was greatly enhanced after loading hybrid metal oxide nanoparticles, so its application in water treatment is potential and applicable.

Solvothermal synthesis of CeO2-ZrO2-M2O3 (M = La, Y, Bi) mixed oxide and their soot oxidation activity

CeO₂–ZrO₂-M₂O₃ (M = La, Y, Bi) mixed oxide has been prepared by a solvothermal synthesis method. The physico–chemical properties of the mixed oxide have been studied by X-ray powder diffraction (XRD), Raman spectroscopy, BET, X-ray photoelectron spectroscopy (XPS), TEM and temperature-programmed reduction (TPR), and the catalytic activity for soot oxidation has been studied by thermogravimetry (TG). La³⁺, Y³⁺ and Bi³⁺ exhibit positive effects on lowering the oxidation temperature of the soot. The XRD and Raman results showed formation of mixed oxides and TEM images suggested the nanosized nature of the particles. The benefit of yttrium or lanthana doping on the catalytic activity of ceria can be related to active oxygen formation provoked by the defective structure of ceria due to the presence of La³⁺ and Y³⁺. The benefit of Bi³⁺ doping on catalytic activity can be related to the reduction at low temperature both with Bi₂O₃ and ceria.

Nano CeO₂-based oxides with meso-pores have been synthesized by a solvothermal method.

Controlling the Structural Properties and Optical Bandgap of PbO–Al2O3 Nanocomposites for Enhanced Photodegradation of Methylene Blue

In the present work, PbO-x wt% Al2O3 nanocomposites (where x = 0, 10, 20, 30, 40, 50, 60, 70, and 100 wt%) were prepared by a microwave irradiation method. Their structural parameters, morphology, and chemical bonds, were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR). It was noticed that the produced phases have an orthorhombic crystal structure and the smaller average crystallite sizes were formed when the ratio of Al2O3 is 40 wt%. The FTIR analysis reveals the formation of various bonds between Al or Pb and O. The TEM analysis reveals that the PbO-x%Al2O3 composites (x = 20, 40, and 60), composed of dense particles, and their size are smaller compared to the pure Al2O3 sample. The optical bandgap obeys the direct allowed transition and decreases from 4.83 eV to 4.35 eV as the PbO ratio in the composites increases from 0 to 100%. The intensity of the photoluminescence emission, at the same wavelength, increases as the PbO ratio increases from 0% to 60% implying that increasing the PbO content increases the capacity of free carriers within the trap centers. The prepared composites are used as a catalyst to remove the methylene blue (MB) from the wasted water under UV-visible or visible light irradiations. The photocatalytic degradation of MB was investigated by applying various kinetic models. It was found that the PbO-30% Al2O3, and PbO-40% Al2O3 composites are the best ones amongst other compositions. Furthermore, the pseudo-second-order model is the best model for describing the deterioration mechanism among the models studied. The formed composites could be suitable for the degradation of organic dyes for water purification as well as applications that required a higher optical bandgap.

Development of Pharmaceutical VOCs Elimination by Catalytic Processes in China

As a byproduct of emerging as one of the world’s key producers of pharmaceuticals, China is now challenged by the emission of harmful pharmaceutical VOCs. In this review, the catalogue and volume of VOCs emitted by the pharmaceutical industry in China was introduced. The commonly used VOC removal processes and technologies was recommended by some typical examples. The progress of catalytic combustion, photocatalytic oxidation, non-thermal plasma, and electron beam treatment were presented, especially the development of catalysts. The advantages and shortages of these technologies in recent years were discussed and analyzed. Lastly, the development of VOCs elimination technologies and the most promising technology were discussed.

Promotional effect of doping Cu into cerium-titanium binary oxides catalyst for deep oxidation of gaseous dichloromethane

In recent years, significant effort has been made in the development of novel catalysts for the total oxidation of chlorinated volatile organic compounds. In this work the catalytic activity of Cu doped cerium-titanium binary oxides for the oxidation of dichloromethane (DCM) have been studied for the first time. Combining catalysts characterization and activity data, it was found that Cu ions can uniformly disperse into titanium dioxide to form solid solution and induce the creation of additional surface oxygen species on the catalysts surface, while moderate amount of Ce ions are still needed for the activation of CCl. Detailed analysis of the in-situ FTIR experiment results revealed that the surface oxygen species, especially the hydroxyl groups associated with Cu ions, can promote the deep oxidation of the intermediate species formed in the nucleophilic substitution process occurred on the active sites of catalysts surface. The sample with the Cu/Ce molar ratio of 1:3 obtained a better CO₂ selectivity than that reached with cerium-titanium binary oxides. Meanwhile, according to element balance analysis, removal of chlorine from the catalyst surface was also promoted by Cu doping.

Enhanced activity and stability of La-doped CeO2 monolithic catalysts for lean-oxygen methane combustion

Effective utilization of coal bed methane is very significant for energy utilization and environment protection. Catalytic combustion of methane is a promising way to eliminate trace amounts of oxygen in the coal bed methane and the key to this technology is the development of high-efficiency catalysts. Herein, we report a series of Ce_1-xLa_xO_2-δ (x = 0-0.8) monolithic catalysts for the catalytic combustion of methane, which are prepared by citric acid method. The structural characterization shows that the substitution of La enhance the oxygen vacancy concentration and reducibility of the supports and promote the migration of the surface oxygen, as a result improve the catalytic activity of CeO₂. M-Ce_0.8La_0.2O_2-δ (monolithic catalyst, Ce_0.8La_0.2O_2-δ coated on cordierite honeycomb) exhibits outstanding activity for methane combustion, and the temperature for 10 and 90% methane conversion are 495 and 580 °C, respectively. Additionally, Ce_0.8La_0.2O_2-δ monolithic catalyst presents excellent stability at high temperature. These Ce_1-xLa_xO_2-δ monolithic materials with a small amount of La incorporation therefore show promises as highly efficient solid solution catalysts for lean-oxygen methane combustion. Graphical abstract ᅟ.

Novel hetero-bimetallic coordination polymer as a single source of highly dispersed Cu/Ni nanoparticles for efficient photocatalytic water splitting

Monodispersed Cu and Ni nanoparticles are deposited over TiO₂ using a hetero-bimetallic coordination polymer for efficient photocatalytic water splitting.

Room-Temperature Dynamics of Vanishing Copper Nanoparticles Supported on Silica

In heterogeneous catalysis, a nanoparticle (NP) system has immediate chemical surroundings with which its interaction needs to be considered, as nanoparticles are typically loaded onto certain supports. Beyond what is known about these interactions, dynamic atomic interactions between the nanoparticle and support could result from the increased energetics at the nanoscale. Here, we show that the dynamic response of atoms in copper nanoparticles to the underlying silica support at room temperature and ambient atmosphere results in the complete disappearance of supported nanoparticles over the course of only a few weeks. A quantitative study of copper nanoparticles at various size regimes (6-17 nm) revealed the significance of size-dependent nanoparticle energetics to the interaction with the support. Extended X-ray absorption fine structure is used to show that copper atoms could readily diffuse into the support to be locally surrounded by oxygen and silicon with structurally disordered outer coordination shells. Increased energetic states at the nanoscale and the energetically favorable configuration of individual copper atoms within silica, identified through EXAFS, are suggested as the cause of nanoparticle disappearance. This unexpected observation opens up new questions as to how nanoparticles interact with surrounding environments that could fundamentally change our conventional view of supported nanoparticle systems.

Migration of copper species in CexCu1−xO2 catalyst driven by thermal treatment and the effect on CO oxidation

A Cu-doped CeO₂ solid solution was constructed by co-precipitation and additional acid treatment to investigate the behavior of doped copper under thermal treatment.

Catalytic Oxidation of NO over MnOx-CeO₂ and MnOx-TiO₂ Catalysts

A series of MnO_x–CeO₂ and MnO_x–TiO₂ catalysts were prepared by a homogeneous precipitation method and their catalytic activities for the NO oxidation in the absence or presence of SO₂ were evaluated. Results show that the optimal molar ratio of Mn/Ce and Mn/Ti are 0.7 and 0.5, respectively. The MnO_x–CeO₂ catalyst exhibits higher catalytic activity and better resistance to SO₂ poisoning than the MnO_x–TiO₂ catalyst. On the basis of Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), and scanning transmission electron microscope with mapping (STEM-mapping) analyses, it is seen that the MnO_x–CeO₂ catalyst possesses higher BET surface area and better dispersion of MnO_x over the catalyst than MnO_x–TiO₂ catalyst. X-ray photoelectron spectroscopy (XPS) measurements reveal that MnO_x–CeO₂ catalyst provides the abundance of Mn³⁺ and more surface adsorbed oxygen, and SO₂ might be preferentially adsorbed to the surface of CeO₂ to form sulfate species, which provides a protection of MnO_x active sites from being poisoned. In contrast, MnO_x active sites over the MnO_x–TiO₂ catalyst are easily and quickly sulfated, leading to rapid deactivation of the catalyst for NO oxidation. Furthermore, temperature programmed desorption with NO and O₂ (NO + O₂-TPD) and in situ diffuse reflectance infrared transform spectroscopy (in situ DRIFTS) characterizations results show that the MnO_x–CeO₂ catalyst displays much stronger ability to adsorb NO_x than the MnO_x–TiO₂ catalyst, especially after SO₂ poisoning.

Influence of hexagonal boron nitride on the selective catalytic reduction of NO with NH3over CuOX/TiO2

hBN promoted NO conversion over CuO_X/TiO₂, hBN promoted the oxidation of NO to NO₂, hBN suppressed the NH₃oxidation, a de-NO_Xactivity of 90.6% was achieved at 275 °C and SO₂promoted the activity at 350 °C.

Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al2O3, TiO2 and ZrO2

Copper or iron supported on commercially available oxides, such as γ-Al