VO Cluster-Stabilized H2O Adsorption on a TiO2 (110) Surface at Room Temperature

We probe the adsorption of molecular H2O on a TiO2 (110)-(1 × 1) surface decorated with isolated VO clusters using ultrahigh-vacuum scanning tunneling microscopy (UHV-STM) and temperature-programmed desorption (TPD). Our STM images show that preadsorbed VO clusters on the TiO2 (110)-(1 × 1) surface induce the adsorption of H2O molecules at room temperature (RT). The adsorbed H2O molecules form strings of beads of H2O dimers bound to the 5-fold coordinated Ti atom (5c-Ti) rows and are anchored by VO. This RT adsorption is completely reversible and is unique to the VO-decorated TiO2 surface. TPD spectra reveal two new desorption states for VO stabilized H2O at 395 and 445 K, which is in sharp contrast to the desorption of water due to recombination of hydroxyl groups at 490 K from clean TiO2(110)-(1 × 1) surfaces. Density functional theory (DFT) calculations show that the binding energy of molecular H2O to the VO clusters on the TiO2 (110)-(1 × 1) surface is higher than binding to the bare surface by 0.42 eV, and the resulting H2O-VO-TiO2 (110) complex provides the anchor point for adsorption of the string of beads of H2O dimers.

Performance, Reaction Pathway, and Pretreatment of Au Catalyst Precursor in H2/O2 Atmosphere for the Epoxidation of Propylene

Gas-phase epoxidation of propylene in the copresence of H2 and O2 was performed over the catalyst of Au on as-synthesized TS-1 that contained a small amount of anatase TiO2. The catalytic performance was studied by washing or nonwashing the catalyst precursor to modulate the content of purity (K, Cl) and then calcining the samples in O2 or H2 prior to reaction. The results show that the catalytic performance of Au/TS-1 can be improved without washing (more K+ and Au maintained) and O2 pretreatment. It was found that the calcination in O2 was able to maintain more metallic Au and form more surface-active oxygen species and thus providing a better yield of propylene oxide with the assistance of potassium. Interestingly, more acrolein can be produced over the catalysts with respect to the in situ calcination in O2 than that in H2 when the feed only contained 10% O2 and 10% propylene in argon, while there was no formation of propylene oxide. On the other hand, the catalyst precursor calcined in H2 prefers the formation of successive oxygenates of PO.

Influence of the Support on Propene Oxidation over Gold Catalysts

The epoxidation of propene without forming a substantial amount of byproducts is one of the holy grails of catalysis. Supported Cu, Ag and Au catalysts are studied for this reaction and the activity of the supported metals is generally well understood. On the contrary, limited information is available on the influence of the support on the epoxide selectivity. The reaction of propene with equal amounts of hydrogen and oxygen was tested over gold nanoparticles deposited onto CeO2, TiO2, WO3, γ-Al2O3, SiO2, TiO2-SiO2 and titanosilicate-1. Several metal oxide supports caused further conversion of the synthesized propene oxide. Strongly acidic supports, such as WO3 and titanosilicate-1, catalyzed the isomerization of propene oxide towards propanal and acetone. Key factors for achieving high PO selectivity are having inert or neutralized surface sites, a low specific surface and/or a low density of surface -OH groups. This work provides insights and practical guidelines to which metal oxide support properties lead to which products in the reaction of propene in the presence of oxygen and hydrogen over supported gold catalysts.

Support work function as a descriptor and predictor for the charge and morphology of deposited Au nanoparticles

We show, using density functional theory calculations, that the charge, magnetic moment, and morphology of deposited Au nanoclusters can be tuned widely by doping the oxide support with aliovalent cations and anions. As model systems, we have considered Au_n (n = 1, 2, or 20) deposited on doped MgO and MgO/Mo supports. The supports have been substitutionally doped with varying concentrations θ of F, Al, N, Na, or Li. At θ = 2.78%, by varying the dopant species, we are able to tune the charge of the Au monomer between -0.84e and +0.21e, the Au dimer between -0.87e and -0.16e, and, most interestingly, Au₂₀ between -3.97e and +0.49e. These ranges can be further extended by varying θ. These changes in charge are correlated with changes in adsorption and/or cluster geometry and magnetic moment. We find that the work function Φ of the bare support is a good predictor and descriptor of both the geometry and charge of the deposited Au cluster; it can, therefore, be used to quickly estimate which dopant species and concentration can result in a desired cluster morphology and charge state. This is of interest as these parameters are known to significantly impact cluster reactivity, with positively or negatively charged clusters being preferred as catalysts for different chemical reactions. It is particularly noteworthy that the Na-doped and Li-doped supports succeed in making Au₂₀ positively charged, given the high electronegativity of Au.

(Co)polymerization of (−)-menthide and β-butyrolactone with yttrium-bis(phenolates): tuning material properties of sustainable polyesters

Sustainable thermoplastic elastomers derived from block copolymers of syndiotactic poly(3-hydroxybutyrate) and poly((−)-menthide) were synthesized via yttrium-mediated ring-opening polymerization.

Theoretical Studies on the Direct Propylene Epoxidation Using Gold-Based Catalysts: A Mini-Review

Direct propylene epoxidation using Au-based catalysts is an important gas-phase reaction and is clearly a promising route for the future industrial production of propylene oxide (PO). For instance, gold nanoparticles or clusters that consist of a small number of atoms demonstrate unique and even unexpected properties, since the high ratio of surface to bulk atoms can provide new reaction pathways with lower activation barriers. Support materials can have a remarkable effect on Au nanoparticles or clusters due to charge transfer. Moreover, Au (or Au-based alloy, such as Au–Pd) can be loaded on supports to form active interfacial sites (or multiple interfaces). Model studies are needed to help probe the underlying mechanistic aspects and identify key factors controlling the activity and selectivity. The current theoretical/computational progress on this system is reviewed with respect to the molecular- and catalyst-level aspects (e.g., first-principles calculations and kinetic modeling) of propylene epoxidation over Au-based catalysts. This includes an analysis of H2 and O2 adsorption, H2O2 (OOH) species formation, epoxidation of propylene into PO, as well as possible byproduct formation. These studies have provided a better understanding of the nature of the active centers and the dominant reaction mechanisms, and thus, could potentially be used to design novel catalysts with improved efficiency.

Gas phase stabiliser-free production of hydrogen peroxide using supported gold-palladium catalysts

Hydrogen peroxide synthesis from hydrogen and oxygen in the gas phase is postulated to be a key reaction step in the gas phase epoxidation of propene using gold-titanium silicate catalysts. During this process H₂O₂ is consumed in a secondary step to oxidise an organic molecule so is typically not observed as a reaction product. We demonstrate that using AuPd nanoparticles, which are known to have high H₂O₂ synthesis rates in the liquid phase, it is possible to not only oxidise organic molecules in the gas phase but to detect H₂O₂ for the first time as a reaction product in both a fixed bed reactor and a pulsed Temporal Analysis of Products (TAP) reactor without stabilisers present in the gas feed. This observation opens up possibility of synthesising H₂O₂ directly using a gas phase reaction.

Hafnium catalysts for direct alkene epoxidation using molecular oxygen as oxidant

Direct alkene epoxidation catalytic cycles were computed for hafnium-based catalysts containing bis(dinitrone) and bis(imine nitrone) ligation using molecular oxygen as oxidant without co-reductant.

Heterogeneous Metal Catalysts for Oxidation Reactions

Oxidation reactions may be considered as the heart of chemical synthesis. However, the indiscriminate uses of harsh and corrosive chemicals in this endeavor are threating to the ecosystems, public health, and terrestrial, aquatic, and aerial flora and fauna. Heterogeneous catalysts with various supports are brought to the spotlight because of their excellent capabilities to accelerate the rate of chemical reactions with low cost. They also minimize the use of chemicals in industries and thus are friendly and green to the environment. However, heterogeneous oxidation catalysis are not comprehensively presented in literature. In this short review, we clearly depicted the current state of catalytic oxidation reactions in chemical industries with specific emphasis on heterogeneous catalysts. We outlined here both the synthesis and applications of important oxidation catalysts. We believe it would serve as a reference guide for the selection of oxidation catalysts for both industries and academics.

Organic transformations on metal nanoparticles: controlling activity, stability, and recyclability by support and solvent interactions

The different mechanisms by which the support and the solvent can influence the catalytic properties of a metal nanoparticle (NP) are reviewed. The use of a support not only significantly facilitates the recycling of NPs but also has many additional advantages varying from enhanced stabilization of the NP dispersion to the alteration of the electronic properties of the metal, shape selectivity effects, and even active participation in the reaction mechanism. The correct choice of solvent, on the other hand, can drastically influence properties such as the morphology of the particles and, in the case of alloys, determine the composition of the NPs. Judicious solvent selection also enhances recyclability and stability, and in some cases, the solvent plays a cocatalytic role. Despite the many beneficial effects of combining metal NPs with the correct support or solvent, many processes are not well understood. Further research should be conducted on elucidating the general mechanisms behind the support-NP or solvent-NP interactions.