Remarkably enhanced ion-exchange capacity of H2O2-intercalated layered titanate

H2O2-intercalated layered titanate H1.07Ti1.73O4 (H2O2-HTO) exhibits a dramatically enhanced ion-exchange capacity and remarkably improved reaction rate with various divalent cations. The intercalation can increase the negative charge density of the TiO6 octahedral layer and the number of ion-exchangeable H+ by forming a Ti(iv)-O-O-H bond that is the driving force to change the ion exchange performance.

Modified Ti-MWW Zeolite as a Highly Efficient Catalyst for the Cyclopentene Epoxidation Reaction

The liquid-phase epoxidation of cyclopentene (CPE) was performed in the Ti-zeolite/H₂O₂ catalytic system for the clean synthesis of cyclopentene oxide. Among all the Ti-zeolites (Ti-Beta, Ti-MOR, Ti-MCM-68, TS-1, TS-2, and Ti-MWW) investigated in the present study, Ti-MWW provided relatively lower CPE conversion of 13% due to the diffusion constrains but a higher CPO selectivity of 99.5%. The catalytic performance of Ti-MWW was significantly enhanced by piperidine (PI) treatment, with the CPE conversion and CPO selectivity increased to 97.8 and 99.9%, respectively. The structural rearrangement upon PI treatment converted the 3-dimensional (3D) MWW structure to a 2D lamellar one, which enlarged the interlayer space and greatly alleviated the diffusion constrains of cyclic cyclopentene. Furthermore, the newly constructed “open site” six-coordinated Ti active sites with PI as the ligand exhibited higher catalytic activity. The two factors contributed to more significant enhancement of the activity upon PI-assisted structural arrangement compared to the cases in linear alkenes.

Improvement of the selectivity to aniline in benzene amination over Cu/TS-1 by potassium

Two different methods of introducing potassium into Cu/TS-1 were conducted and the catalysts obtained showed a rather different catalytic activity in the ammoxidation of benzene to aniline.

Accessibility enhancement of TS-1-based catalysts for improving the epoxidation of plant oil-derived substrates

TS-1-based catalysts with different textural features, namely layered TS-1, pillared TS-1, and Ti-pillared TS-1 as well as mesoporous TS-1, were investigated in the liquid-phase epoxidation of methyl oleate as a model compound for plant oil-derived substrates with hydrogen peroxide at 50 °C.

MFI zeolite nanosheets with post-synthetic Ti grafting for catalytic epoxidation of bulky olefins using H2O2

The external surfaces of the surfactant-directed, 2.5 nm MFI zeolite nanosheets were grafted with Ti using titanium(iv) butoxide.

In Situ UV−vis and EPR Study on the Formation of Hydroperoxide Species during Direct Gas Phase Propylene Epoxidation over Au/Ti-SiO2 Catalyst

In recent years, there have been great experimental and theoretical advances in the understanding of the epoxidation of propylene by O(2) and H(2) over Au supported on titanium-containing oxidic supports; however, thus far spectroscopic evidence of reacting species for proposed mechanisms has been lacking. Hydroperoxide species have been postulated as an intermediate responsible for the epoxidation of propylene with O(2) and H(2). In order to obtain direct evidence for the different type of active oxygen species, in situ UV-vis and EPR measurements were carried out during the epoxidation of propylene with O(2) and H(2) over a Au/Ti-SiO(2) (Ti/Si = 3:100) catalyst. It was determined that the adsorbed species of oxygen (O(2)(-)) resided on Au, more likely at a perimeter site, and it led to the formation of titanium hydroperoxo species. These results support the possible mechanism of formation of these hydroperoxo species via H(2)O(2) produced from O(2) and H(2) adsorbed on the Au surfaces.

Reactivity studies, structural characterization, and thermolysis of cubic titanosiloxanes: precursors to titanosilicate materials which catalyze olefin epoxidation

The cubic titanosiloxane [RSiO(3)Ti(OPr(i))](4) (R = 2,6-Pr(2)(i)C(6)H(3)NSiMe(3)) (1) is found to be relatively inert in its attempted reactions with alcohols and other acidic hydrogen containing compounds. The reaction of 1 with silanol (Bu(t)O)(3)SiOH however proceeds over a period of approximately 3 months to result in the hydrolysis of (Bu(t)O)(3)SiOH and yield the transesterification product [RSiO(3)Ti(OBu(t))](4) (2) rather than the expected [RSiO(3)Ti(OSi(OBu(t))(3))](4). Products 1 and 2 have been characterized by elemental analysis, thermal analysis, and spectroscopic techniques (IR, EI-MS, and NMR). The solid-state structures of both 1 and 2 have been determined by single-crystal X-ray diffraction studies. Compounds 1 and 2 are isomorphous and crystallize in a cubic space group with a central cubic Ti(4)Si(4)O(12) core. Solid state thermolysis of 1 was carried at 450, 600, 800, 900, 1000, and 1200 degrees C in air, and the resulting titanosilicate materials 1a-f were characterized by spectroscopic (IR and DR UV), powder XRD, and electron microscopic methods. While, the presence of Ti-O-Si linkages appears to be dominant in the samples prepared at lower temperatures (450-800 degrees C), phase separation of anatase and rutile forms of TiO(2) occurs at temperatures above 900 degrees C as revealed by IR spectral and PXRD studies. The presence of octahedral titanium centers was observed by DR UV spectroscopy for the samples heated at higher temperatures. The use of new titanosilicate materials as catalysts for olefin epoxidation has been investigated. The titanosilicate materials produced at temperatures below 800 degrees C with a large number of Ti-O-Si linkages (or tetrahedral titanium centers) were found to be more active catalysts compared to the materials produced above 900 degrees C. The observed conversion in the epoxidation reactions was found to be somewhat low although the selectivity of the epoxide formation over the other possible oxidized products was found to be very good.