Direct Quantification of Aspergillus niger Spore Adhesion in Liquid Using an Atomic Force Microscope

Effects of Cationic and Anionic Surfaces on the Perpendicular and Lateral Forces and Binding of Aspergillus niger Conidia

The binding of conidia to surfaces is a prerequisite for biofouling by fungal species. In this study, Aspergillus niger subtypes 1957 and 1988 were used which produced differently shaped conidia (round or spikey respectively). Test surfaces were characterised for their surface topography, wettability, and hardness. Conidial assays included perpendicular and lateral force measurements, as well as attachment, adhesion and retention assays. Anionic surfaces were less rough (Ra 2.4 nm), less wettable (54°) and harder (0.72 GPa) than cationic surfaces (Ra 5.4 nm, 36° and 0.5 GPa, respectively). Perpendicular and lateral force assays demonstrated that both types of conidia adhered with more force to the anionic surfaces and were influenced by surface wettability. Following the binding assays, fewer A. niger 1957 and A. niger 1988 conidia bound to the anionic surface. However, surface wettability affected the density and dispersion of the conidia on the coatings, whilst clustering was affected by their spore shapes. This work demonstrated that anionic surfaces were more repulsive to A. niger 1998 spores than cationic surfaces were, but once attached, the conidia bound more firmly to the anionic surfaces. This work informs on the importance of understanding how conidia become tightly bound to surfaces, which can be used to prevent biofouling.

Aerosolization of fungal spores in indoor environments

Fungi in indoor environments can cause adverse health effects through inhalation and epidermal exposure. The risk of fungal exposure originates from the aerosolization of fungal spores. However, spore aerosolization is still not well understood. This paper provides a review of indoor fungal contamination, especially the aerosolization of fungal spores. We attempted to summarize what is known today and to identify what more information is needed to predict the aerosolization of fungal spores. This paper first reviews fungal contamination in indoor environments and HVAC systems. The detachment of fungal spores from colonies and the spore aerosolization principle are then summarized. Based on the above discussion, prediction methods for spore aerosolization are discussed. This review further clarifies the current situation and future efforts required to accurately predict spore aerosolization. This information is useful for forecasting and controlling the aerosolization of fungal spores.

Diverse surface properties reveal that substratum roughness affects fungal spore binding

Binding to surfaces by fungal spores is a prerequisite to biofilm formation. The interactions of polytetrafluoroethylene (PTFE), glass, and silicon with three fungal spores, of differing shapes and sizes (Aspergillus niger 1957, Aspergillus niger 1988, and Aureobasidium pullulans), were investigated. A multifractal analysis was conducted to provide quantitative measures of density, dispersion, and clustering of spores on the surfaces. The PTFE, glass, and silicon surfaces presented a range of surface topographies and wettabilities. PTFE was the roughest and most non-wettable surface, whereas silicon was the opposite in terms of both these aspects. The A. niger species were more non-wettable than A. pullulans. Overall, A. niger 1957 attached in higher numbers to PTFE, whereas A. niger 1988 and A. pullulans bound in highest numbers to glass. The results of this work demonstrated that the overall substratum surface roughness influenced spore binding rather than the physicochemical or chemical properties of surfaces or spores.

•

Multifractal analysis gave measures of density, dispersion, and clustering of spores

•

A. niger 1957 attached in higher numbers to PTFE

•

A. niger 1988 and A. pullulans bound in highest numbers to glass

•

Substratum surface roughness influenced spore binding

Fungal spore adhesion on glycidoxypropyltrimethoxy silane modified silica nanoparticle surfaces as revealed by single cell force spectroscopy

Thin film coatings prepared from commercially available glycidoxypropyltrimethoxysilane (GPS) modified silica nanoparticles (SiNPs) (Bindzil® CC301 and Bindzil® CC302) have previously shown excellent antifouling performance against a broad range of microbes [Molino et al., "Hydration layer structure of biofouling-resistant nanoparticles," ACS Nano 12, 11610 (2018)]. In this work, single cell force spectroscopy (SCFS) was used to measure the biological interactions between Epicoccum nigrum fungal spores and the same silica nanoparticle-based surfaces used in the aforementioned study, including a: glass coverslip, unmodified SiNP coatings, and both low (Bindzil® CC301) and high density (CC302) GPS functionalized SiNP coatings as a function of NaCl concentration. From the SCFS curves, the spore adhesion to the surface was greatest on the glass coverslip (20-80 nN) followed by the unmodified SiNP (3-5 nN) across all salt concentrations. Upon approach to both surfaces, the spores showed a long-range attraction generally with a profile characteristic of biointeractions and likely those of the outer cell wall structures or biological constituents. The attractive force allowed the spores to initially adhere to the surface and was found to be linearly proportional to the spore adhesion. In comparison, both high and low density GPS-SINP significantly reduced the spore adhesion (0.5-0.9 nN). In addition, the spore adhesion on high density GPS-SiNP occurred in only 14%-27% of SCFS curves (40%-48% for low density GPS-SiNP) compared to 83%-97% for the unmodified SiNP, indicating that in most cases the GPS functionalization completely prevented spore adhesion. The GPS-SiNP surfaces conversely showed a long-range electrostatic repulsion at low 1mM NaCl that was replaced by short-range repulsion at the higher salt concentrations. From the findings, it is proposed that the attractive force is a critical step in initial adhesion processes of the spore. The effective antifouling properties of the GPS are attributed to the ability to negate the attractive forces, either through electrostatic repulsion in low salt conditions and primarily from short-range repulsion correlating to the previously reported combined steric-hydration effect of the GPS functionalization on SiNP coatings.

Atomic Force Microscopy: A Promising Tool for Deciphering the Pathogenic Mechanisms of Fungi in Cystic Fibrosis

During the past decades, atomic force microscopy (AFM) has emerged as a powerful tool in microbiology. Although most of the works concerned bacteria, AFM also permitted major breakthroughs in the understanding of physiology and pathogenic mechanisms of some fungal species associated with cystic fibrosis. Complementary to electron microscopies, AFM offers unprecedented insights to visualize the cell wall architecture and components through three-dimensional imaging with nanometer resolution and to follow their dynamic changes during cell growth and division or following the exposure to drugs and chemicals. Besides imaging, force spectroscopy with piconewton sensitivity provides a direct means to decipher the forces governing cell-cell and cell-substrate interactions, but also to quantify specific and non-specific interactions between cell surface components at the single-molecule level. This nanotool explores new ways for a better understanding of the structures and functions of the cell surface components and therefore may be useful to elucidate the role of these components in the host-pathogen interactions as well as in the complex interplay between bacteria and fungi in the lung microbiome.

The filamentous fungal pellet and forces driving its formation

Filamentous fungi play an important role not only in the bio-manufacturing of value-added products, but also in bioenergy and environmental research. The bioprocess manipulation of filamentous fungi is more difficult than that of other microbial species because of their different pellet morphologies and the presence of tangled mycelia under different cultivation conditions. Fungal pellets, which have the advantages of harvest ease, low fermentation broth viscosity and high yield of some proteins, have been used for a long time. Many attempts have been made to establish the relationship between pellet and product yield using quantitative approaches. Fungal pellet formation is attributed to the combination of electrostatic interactions, hydrophobicity and specific interactions from spore wall components. Electrostatic interactions result from van der Waals forces and negative charge repulsion from carboxyl groups in the spore wall structure. Electrostatic interactions are also affected by counter-ions (cations) and the physiologic conditions of spores that modify the carboxyl groups. Fungal aggregates are promoted by the hydrophobicity generated by hydrophobins, which form a hydrophobic coat that covers the spore. The specific interactions of spore wall components contribute to spore aggregation through salt bridging. A model of spore aggregation was proposed based on these forces. Additionally, some challenges were addressed, including the limitations of research techniques, the quantitative determination of forces and the complex information of biological systems, to clarify the mechanism of fungal pellet formation.

Characterization of an adhesive molecule from Bacillus megaterium ADE-0-1

An adhesive exopolysaccharide (EPS), from a biofilm forming marine strain ADE-0-1, identified as Bacillus megaterium using conventional microbiological test and 16S rDNA analysis, contained 75% carbohydrate, 17% uronic acid and 0.00125% pyruvate on dry weight basis as per colorimetric determinations and found anionic in nature by ion exchange chromatography. Paper chromatographic and HPLC analysis of EPS hydrolysate indicated presence of arabinose, glucose, mannose, galacturonic acid and glucuronic acid. Its molecular weight was 0.5×10(6) Da, by gel permeation chromatography. FT-IR spectroscopic analysis of EPS revealed presence of hydroxyl and carboxyl groups particularly. EPS exhibited an adhesive nature and could glue wood, metals and acrylic plastic. Using this EPS adhesive (10% w/v), maximum lap shear strength observed was 6.12 MPa at pH 7 and 50 °C (curing temperature) for wood to wood specimen as compared to 6.54 MPa obtained with fevicol (48 to 50% w/v).

Conidia of the insect pathogenic fungus, Metarhizium anisopliae, fail to adhere to mosquito larval cuticle

Adhesion of conidia of the insect pathogenic fungus, Metarhizium anisopliae, to the arthropod host cuticle initially involves hydrophobic forces followed by consolidation facilitated by the action of extracellular enzymes and secretion of mucilage. Gene expression analysis and atomic force microscopy were used to directly quantify recognition and adhesion between single conidia of M. anisopliae and the cuticle of the aquatic larval stage of Aedes aegypti and a representative terrestrial host, Tenebrio molitor. Gene expression data indicated recognition by the pathogen of both hosts; however, the forces for adhesion to the mosquito were approximately five times lower than those observed for Tenebrio. Although weak forces were recorded in response to Aedes, Metarhizium was unable to consolidate firm attachment. An analysis of the cuticular composition revealed an absence of long-chain hydrocarbons in Aedes larvae which are thought to be required for fungal development on host cuticle. This study provides, to our knowledge, the first evidence that Metarhizium does not form firm attachment to Ae. aegypti larvae in situ, therefore preventing the normal route of invasion and pathogenesis from occuring.

Nanoscale structural and mechanical analysis of Bacillus anthracis spores inactivated with rapid dry heating

Effective killing of Bacillus anthracis spores is of paramount importance to antibioterrorism, food safety, environmental protection, and the medical device industry. Thus, a deeper understanding of the mechanisms of spore resistance and inactivation is highly desired for developing new strategies or improving the known methods for spore destruction. Previous studies have shown that spore inactivation mechanisms differ considerably depending upon the killing agents, such as heat (wet heat, dry heat), UV, ionizing radiation, and chemicals. It is believed that wet heat kills spores by inactivating critical enzymes, while dry heat kills spores by damaging their DNA. Many studies have focused on the biochemical aspects of spore inactivation by dry heat; few have investigated structural damages and changes in spore mechanical properties. In this study, we have inactivated Bacillus anthracis spores with rapid dry heating and performed nanoscale topographical and mechanical analysis of inactivated spores using atomic force microscopy (AFM). Our results revealed significant changes in spore morphology and nanomechanical properties after heat inactivation. In addition, we also found that these changes were different under different heating conditions that produced similar inactivation probabilities (high temperature for short exposure time versus low temperature for long exposure time). We attributed the differences to the differential thermal and mechanical stresses in the spore. The buildup of internal thermal and mechanical stresses may become prominent only in ultrafast, high-temperature heat inactivation when the experimental timescale is too short for heat-generated vapor to efficiently escape from the spore. Our results thus provide direct, visual evidences of the importance of thermal stresses and heat and mass transfer to spore inactivation by very rapid dry heating.

Determination of adhesion between single Aspergillus niger spores in aqueous solutions using an atomic force microscope

The interaction force between single cells in contact is of high interest in various interdisciplinary fields of biotechnology, for instance, in cultivation or biofilm formation. A method for the determination of adhesion forces between two single Aspergillus niger spores in different aqueous solutions was established in this study. Adhesion force distributions were determined at three different sodium chloride concentrations and two different pH values using an atomic force microscope (AFM). It was pointed out that adhesion data can be described by log-normal density functions, of which corresponding parameters have been estimated. Using the knowledge of distribution shape, the influence of the environmental condition on the mean values of adhesion force could be studied quantitatively. The highest value of 0.95 nN was observed at pH 2.5 and an ionic strength of 0.5 mol L(-1). Decreasing the ionic strength to 0.05 mol L(-1) decreases the adhesion force mean for about 25%. Increasing the pH value to pH 5 at a sodium chloride concentration of 0.154 mol L(-1) entails a decrease of adhesion from 0.88 to 0.56 nN. These results qualitatively agree with the absolute value of the expected surface potential of Aspergillus niger spores, which is much higher at pH 5 and should take more effect at lower concentrations of counterions.

Application of AFM from microbial cell to biofilm

Atomic Force Microscopy (AFM) has proven itself over recent years as an essential tool for the analysis of microbial systems. This article will review how AFM has been used to study microbial systems to provide unique insight into their behavior and relationship with their environment. Immobilization of live cells has enabled AFM imaging and force measurement to provide understanding of the structure and function of numerous microbial cells. At the macromolecular level AFM investigation into the properties of surface macromolecules and the energies associated with their mechanical conformation and functionality has helped unravel the complex interactions of microbial cells. At the level of the whole cell AFM has provided an integrated analysis of how the microbial cell exploits its environment through its selective, adaptable interface, the cell surface. In addition to these areas of study the AFM investigation of microbial biofilms has been vital for industrial and medical process analysis. There exists a tremendous potential for the future application of AFM to microbial systems and this has been strengthened by the trend to use AFM in combination with other characterization methods, such as confocal microscopy and Raman spectroscopy, to elucidate dynamic cellular processes.

Morphology of filamentous fungi: linking cellular biology to process engineering using Aspergillus niger

In various biotechnological processes, filamentous fungi, e.g. Aspergillus niger, are widely applied for the production of high value-added products due to their secretion efficiency. There is, however, a tangled relationship between the morphology of these microorganisms, the transport phenomena and the related productivity. The morphological characteristics vary between freely dispersed mycelia and distinct pellets of aggregated biomass. Hence, advantages and disadvantages for mycel or pellet cultivation have to be balanced out carefully. Due to this inadequate understanding of morphogenesis of filamentous microorganisms, fungal morphology, along with reproducibility of inocula of the same quality, is often a bottleneck of productivity in industrial production. To obtain an optimisation of the production process it is of great importance to gain a better understanding of the molecular and cell biology of these microorganisms as well as the approaches in biochemical engineering and particle technique, in particular to characterise the interactions between the growth conditions, cell morphology, spore-hyphae-interactions and product formation. Advances in particle and image analysis techniques as well as micromechanical devices and their applications to fungal cultivations have made available quantitative morphological data on filamentous cells. This chapter provides the ambitious aspects of this line of action, focussing on the control and characterisation of the morphology, the transport gradients and the approaches to understand the metabolism of filamentous fungi. Based on these data, bottlenecks in the morphogenesis of A. niger within the complex production pathways from gene to product should be identified and this may improve the production yield.

Change in surface properties of Microthrix parvicella upon addition of polyaluminium chloride as characterized by atomic force microscopy

The filamentous bacterium Microthrix parvicella causes severe separation and foaming problems at wastewater treatment plants (WWTPs). An effective control of the bacterium in activated sludge WWTPs can be accomplished by dosage with polyaluminium chloride (PAX-14). The purpose of this study was to investigate whether addition of PAX-14 affects surface properties such as the hydrophobicity of the bacterium and to study the exopolymers of M. parvicella that host surface-associated enzymes. To this end, force measurements by atomic force microscopy were carried out to measure the interactions between hydrophilic and hydrophobized tips and the bacterium surface. Addition of PAX-14 caused no changes in the hydrophobicity of the bacterium surface but the data indicate that it collapsed the polymeric layer likely due to electrostatic screening. It is concluded that the collapse of the polymeric layer may affect the transport of substrates (eg free fatty acids) to the bacterium and hence the competitiveness of M. parvicella compared to the other bacteria present in activated sludge.

The influence of ionic strength, nutrients and pH on bacterial adhesion to metals

Bacteria-metal interactions in aqueous solutions are important in biofilm formation, biofouling and biocorrosion problems in the natural environment and engineered systems. In this study, the adhesion forces of two anaerobes (Desulfovibrio desulfuricans and Desulfovibrio singaporenus) and an aerobe (Pseudomonas sp.) to stainless steel 316 in various aqueous systems were quantified using atomic force microscopy (AFM) with a cell probe. Results show that the nutrient and ionic strength of the solutions influence the bacteria-metal interactions. The bacteria-metal adhesion force was reduced in the presence of the nutrients in the solution, because a trace organic film was formed and thus decreased the metal surface wettability. Stronger ionic strength in the solution results in a larger bacteria-metal adhesion force, which is due to the stronger electrostatic attraction force between the positively charged metal surface and negatively charged bacterial surface. Solution pH also influences the interaction between the bacterial cells and the metal surface; the bacteria-metal adhesion force reached its highest value when the pH of the solution was near the isoelectric point of the bacteria, i.e. at the zero point charge. The adhesion forces at pH 9 were higher than at pH 7 due to the increase in the attraction between Fe ions and negative carboxylate groups.

Force measurements of bacterial adhesion on metals using a cell probe atomic force microscope

The adhesion of microbial cells to metal surfaces in aqueous media is an important phenomenon in both the natural environment and engineering systems. The adhesion of two anaerobic sulfate-reducing bacteria (Desulfovibrio desulfuricans and a local marine isolate) and an aerobe (Pseudomonas sp.) to four polished metal surfaces (i.e., stainless steel 316, mild steel, aluminum, and copper) was examined using a force spectroscopy technique with an atomic force microscope (AFM). Using a modified bacterial tip, the attraction and repulsion forces (in the nano-Newton range) between the bacterial cell and the metal surface in aqueous media were quantified. Results show that the bacterial adhesion force to aluminum is the highest among the metals investigated, whereas the one to copper is the lowest. The bacterial adhesion forces to metals are influenced by both the electrostatic force and metal surface hydrophobicity. It is also found that the physiological properties of the bacterium, namely the bacterial surface charges and hydrophobicity, also have influence on the bacteria-metal interaction. The adhesion to the metals by Pseudomonas sp. and D. desulfuricans was greater than by the marine SRB isolate. The cell-cell interactions show that there are strong electrostatic repulsion forces between bacterial cells. Cell probe atomic force microscopy has provided some useful insight into the interactions of bacterial cells with the metal surfaces.

Ultrastructure of spined conidia and hyphae of the rice false smut fungus Ustilaginoidea virens

Spined conidia and hyphae of Ustilaginoidea virens were examined by light and electron microscopy. Bright-field light microscopy showed that conidia were round to elliptical and warty on the surface with diameters approximately ranging from 3 to 5 microm. Scanning electron microscopy revealed the globose to irregularly rounded and ornamented conidia with prominent spines. The spines were pointed at the apex or irregularly curved, and approximately 200-500 nm long. Ultrastructure of spined conidia and hyphae revealed by transmission electron microscopy showed lipid globules and vacuoles in the cytoplasm enclosed by an electron-transparent cell wall. Conspicuous electron-dense spines were evident on the surface of conidia, and had obclavate or irregularly protruding shapes with varying heights along the conidial cell wall. Microfibrillar structures with stretching or branching patterns were evident in the spine matrix. Some conidia were interconnected by spines from the neighboring conidia by their extended outgrowth. Hyphae had concentric bodies that showed an electron-transparent core surrounded by an electron-dense layer. One or more intrahyphal hyphae were found in hyphal cytoplasm. The fungus is thought to form concentric bodies and intrahyphal hyphae as survival mechanisms against the water- and nutrient-deficient environments that may occur in the necrotic regions of host plants.

Assessment of elasticity and topography of Aspergillus nidulans spores via atomic force microscopy

Previous studies have described both surface morphology and adhesive properties of fungal spores, but little information is currently available on their mechanical properties. In this study, atomic force microscopy (AFM) was used to investigate both surface topography and micromechanical properties of Aspergillus nidulans spores. To assess the influence of proteins covering the spore surface, wild-type spores were compared with spores from isogenic rodA(+) and rodA(-) strains. Tapping-mode AFM images of wild-type and rodA(+) spores in air showed characteristic "rodlet" protein structures covering a granular spore surface. In comparison, rodA(-) spores were rodlet free but showed a granular surface structure similar to that of the wild-type and rodA(+) spores. Rodlets were removed from rodA(+) spores by sonication, uncovering the underlying granular layer. Both rodlet-covered and rodlet-free spores were subjected to nanoindentation measurements, conducted in air, which showed the stiffnesses to be 110 +/- 10, 120 +/- 10, and 300 +/- 20 N/m and the elastic moduli to be 6.6 +/- 0.4, 7.0 +/- 0.7, and 22 +/- 2 GPa for wild-type, rodA(+) and rodA(-) spores, respectively. These results imply the rodlet layer is significantly softer than the underlying portion of the cell wall.

Adhesion of Aureobasidium pullulans Is Controlled by Uronic Acid Based Polymers and Pullulan

Aureobasidium pullulans is a potentially pathogenic microfungus that produces and secretes the polysaccharide pullulan and other biomacromolecules, depending on the microbe's physiological state. The role of these macromolecules in mediating adhesion and attachment were examined. Interfacial forces and adhesion affinities of A. pullulans were probed for early-exponential phase (EEP) and late-exponential phase (LEP) cells, using atomic force microscopy (AFM). Biochemical assays showed that A. pullulans produces both pullulan and a uronic acid based polymer. The pullulan is not produced until the LEP, and it can be removed by treatment with pullulanase. Both adhesion forces between the microbe and the AFM tip (silicon nitride) and attachment of the cells to quartz sand grains were controlled by the density of the uronic acid polymer. Uronic acid polymers doubled in density between the EEP and the LEP and were unaffected by the enzyme pullulanase. Retention to quartz in a packed column was quantified using the collision efficiency (alpha), the fraction of collisions between the microbes, and the sand grains, that result in attachment. Adhesion forces and retention on glass were well correlated, with these values being higher for EEP cells (F(adh) = 7.65 +/-4.67 nN; alpha = 1.15) than LEP (F(adh) = 2.94 +/- 0.75; alpha = 0.49) and LEP + pullulanase cells (F(adh) = 2.33 +/-2.01 nN; alpha = 0.43). Steric interactions alone do not describe the adhesion behavior of this fungus, but they do provide information regarding the length and density of the macromolecules studied.

Aggregation of yeast cells: direct measurement of discrete lectin–carbohydrate interactions

Aggregation of microbial cells mediated by specific interactions plays a pivotal role in the natural environment, in medicine and in biotechnological processes. Here we used atomic force microscopy (AFM) to measure individual lectin–carbohydrate interactions involved in the flocculation of yeast cells, an aggregation event of crucial importance in fermentation technology. AFM probes functionalized with oligoglucose carbohydrates were used to record force-distance curves on living yeast cells at a rate of 0·5 μm s−1. Flocculating cells showed adhesion forces of 121±53 pN, reflecting the specific interaction between individual cell-surface lectins and glucose residues. Similar adhesion forces, 117±41 pN, were measured using probes functionalized with the lectin concanavalin A and attributed to specific binding to cell-surface mannose residues. By contrast, specific interaction forces were not observed in non-flocculating conditions, i.e. in the presence of mannose or when using non-flocculating cells, pointing to their involvement in yeast flocculation. The single molecule force spectroscopy measurements presented here provide a means to study a variety of cellular interactions at the molecular level, such as the adhesion of bacteria to animal and plant tissues.

Role of ionic strength on the relationship of biopolymer conformation, DLVO contributions, and steric interactions to bioadhesion of Pseudomonas putida KT2442

Biopolymers produced extracellularly by Pseudomonas putida KT2442 were examined via atomic force microscopy (AFM) and single molecule force spectroscopy. Surface biopolymers were probed in solutions with added salt concentrations ranging from that of pure water to 1 M KCl. By studying the physicochemical properties of the polymers over this range of salt concentrations, we observed a transition in the steric and electrostatic properties and in the conformation of the biopolymers that were each directly related to bioadhesion. In low salt solutions, the electrophoretic mobility of the bacterium was negative, and large theoretical energy barriers to adhesion were predicted from soft-particle DLVO theory calculations. The brush layer in low salt solution was extended due to electrostatic repulsion, and therefore, steric repulsion was also high (polymers extended 440 nm from surface in pure water). The extended polymer brush layer was "soft", characterized by the slope of the compliance region of the AFM approach curves (-0.014 nN/nm). These properties resulted in low adhesion between biopolymers and the silicon nitride AFM tip. As the salt concentration increased to > or =0.01 M, a transition was observed toward a more rigid and compressed polymer brush layer, and the adhesion forces increased. In 1 M KCl, the polymer brush extended 120 nm from the surface and the rigidity of the outer cell surface was greater (slope of the compliance region = -0.114 nN/nm). A compressed and more rigid polymer layer, as well as a less negative electrophoretic mobility for the bacterium, resulted in higher adhesion forces between the biopolymers and the AFM tip. Scaling theories for polyelectrolyte brushes were also used to explain the behavior of the biopolymer brush layer as a function of salt concentration.

The measurement of Bacillus mycoides spore adhesion using atomic force microscopy, simple counting methods, and a spinning disk technique

An atomic force microscope has been used to study the adhesion of Bacillus mycoides spores to a hydrophilic glass surface and a hydrophobic-coated glass surface. AFM images of spores attached to the hydrophobic-coated mica surface allowed the measurement of spore dimensions in an aqueous environment without desiccation. The spore exosporium was observed to be flexible and to promote the adhesion of the spore by increasing the area of spore contact with the surface. Results from counting procedures using light microscopy matched the density of spores observed on the hydrophobic-coated glass surface with AFM. However, no spores were observed on the hydrophilic glass surface with AFM, a consequence of the weaker adhesion of the spores at this surface. AFM was also used to quantify directly the interactions of B. mycoides spores at the two surfaces in an aqueous environment. The measurements used "spore probes" constructed by immobilizing a single spore at the apex of a tipless AFM cantilever. The data showed that stretching and sequential bond breaking occurred as the spores were retracted from the hydrophilic glass surface. The greatest spore adhesion was measured at the hydrophobic-coated glass surface. An attractive force on the spores was measured as the spores approached the hydrophobic-coated surface. At the hydrophilic glass surface, only repulsive forces were measured during the approach of the spores. The AFM force measurements were in qualitative agreement with the results of a hydrodynamic shear adhesion assay that used a spinning disk technique. Quantitatively, AFM measurements of adhesive force were up to 4 x 10(3) times larger than the estimates made using the spinning disk data. This is a consequence of the different types of forces applied to the spore in the different adhesion assays. AFM has provided some unique insights into the interactions of spores with surfaces. No other instrument can make such direct measurements for single microbiological cells.

Atomic Force Microscopy Study of the Adhesion of Saccharomyces cerevisiae

An atomic force microscope (AFM) has been used to quantify directly the adhesion of metabolically active Saccharomyces cerevisiae cells at a hydrophilic mica surface, a mica surface with a hydrophobic coating, and a protein-coated mica surface in an aqueous environment. The measurements used "cell probes" constructed by immobilizing a single cell at the apex of a tipless AFM cantilever. Adhesion was quantified from force-distance data for the retraction of the cell from the surface. The data indicated stretching and sequential bond-breaking as the cell probe was retracted from all of the surfaces. Detailed studies were made for physiologically active cells, which were shown to have different adhesion properties to glutaraldehyde-treated cells. Greatest cell adhesion was measured at the hydrophobic surface. Prior adsorption of a bovine serum albumin protein layer at the hydrophilic surface did not significantly affect cell adhesion. Changes in yeast surface hydrophobicity and zeta-potential with yeast cell age were correlated with differences in adhesion. Cells from the stationary phase adhered most strongly to a mica surface. Time of surface contact was demonstrated to be important. Both the force needed to detach a cell from a hydrophilic mica surface and the length of the adhesive interaction increased after 5 min contact. The AFM cell probe technique gives unique insights into primary colonization events in biofilm formation. It will continue to aid both fundamental studies and the assessment of new procedures that are designed to lower cell adhesion at surfaces relevant to biotechnology, medicine, and dentistry Copyright 2001 Academic Press.