Optimization of conditions for the single step IMAC purification of miraculin from Synsepalum dulcificum

In this study, the methods for extraction and purification of miraculin from Synsepalum dulcificum were investigated. For extraction, the effect of different extraction buffers (phosphate buffer saline, Tris-HCl and NaCl) on the extraction efficiency of total protein was evaluated. Immobilized metal ion affinity chromatography (IMAC) with nickel-NTA was used for the purification of the extracted protein, where the influence of binding buffer pH, crude extract pH and imidazole concentration in elution buffer upon the purification performance was explored. The total amount of protein extracted from miracle fruit was found to be 4 times higher using 0.5M NaCl as compared to Tris-HCl and phosphate buffer saline. On the other hand, the use of Tris-HCl as binding buffer gave higher purification performance than sodium phosphate and citrate-phosphate buffers in IMAC system. The optimum purification condition of miraculin using IMAC was achieved with crude extract at pH 7, Tris-HCl binding buffer at pH 7 and the use of 300 mM imidazole as elution buffer, which gave the overall yield of 80.3% and purity of 97.5%. IMAC with nickel-NTA was successfully used as a single step process for the purification of miraculin from crude extract of S. dulcificum.

Magnetic amine-functionalized polyacrylic acid-nanomagnetite for hexavalent chromium removal from polluted water

A magnetic amine-functionalized polyacrylic acid-nanomagnetite adsorbent is developed for the removal of toxic hexavalent chromium from polluted water.

An AIL/IL-based liquid/liquid extraction system for the purification of His-tagged proteins

A sorbent based on affinity ionic liquid (AIL), triazacyclononane-ionic liquid, was synthesized, characterized, and applied to the extraction of histidine (His)-tagged proteins from aqueous buffer to ionic liquid (IL) phase. The adsorbed His-tagged proteins could be back-extracted from the IL phase to the aqueous buffer with an imidazole solution. The specific binding of His-tagged proteins with AIL/IL could be affected by a few factors including the ionic strength and coordinated metal ions. In the case of His-tagged enhanced green fluorescent protein (EGFP), the maximum binding capacity of Cu(2+)-AIL/IL reached 2.58 μg/μmol under the optimized adsorption conditions. The eluted His-tagged EGFP kept fluorescent and remained active through the purification process. Moreover, a tandem extraction process successively using Cu(2+)-AIL/IL and Zn(2+)-AIL/IL systems was developed, which was proven very efficient to obtain the ultimate protein with a purity of about 90 %. An effective reclamation method for the AIL/IL extraction system was further established. The sorbent could be easily regenerated by removing metal ions with EDTA and the followed reimmobilization of metal ions. Easy handling of the presented M(2+)-AIL/IL system and highly specific ability to absorb His-tagged proteins make it attractive and potentially applicable in biomolecular separation.

pH-responsive delivery of doxorubicin from citrate-apatite nanocrystals with tailored carbonate content

In this work, the efficiency of bioinspired citrate-functionalized nanocrystalline apatites as nanocarriers for delivery of doxorubicin (DOXO) has been assessed. The nanoparticles were synthesized by thermal decomplexing of metastable calcium/citrate/phosphate solutions both in the absence (Ap) and in the presence (cAp) of carbonate ions. The presence of citrate and carbonate ions in the solution allowed us to tailor the size, shape, carbonate content, and surface chemistry of the nanoparticles. The drug-loading efficiency of the two types of apatite was evaluated by means of the adsorption isotherms, which were found to fit a Langmuir-Freundlich behavior. A model describing the interaction between apatite surface and DOXO is proposed from adsorption isotherms and ζ-potential measurements. DOXO is adsorbed as a dimer by means of a positively charged amino group that electrostatically interacts with negatively charged surface groups of nanoparticles. The drug-release profiles were explored at pHs 7.4 and 5.0, mimicking the physiological pH in the blood circulation and the more acidic pH in the endosome-lysosome intracellular compartment, respectively. After 7 days at pH 7.4, cAp-DOXO released around 42% less drug than Ap-DOXO. However, at acidic pH, both nanoassemblies released similar amounts of DOXO. In vitro assays analyzed by confocal microscopy showed that both drug-loaded apatites were internalized within GTL-16 human carcinoma cells and could release DOXO, which accumulated in the nucleus in short times and exerted cytotoxic activity with the same efficiency. cAp are thus expected to be a more promising nanocarrier for experiments in vivo, in situations where intravenous injection of nanoparticles are required to reach the targeted tumor, after circulating in the bloodstream.

Host-Tailored Sensors for Leucomalachite Green Potentiometric Measurements

A new biomimetic sensor for leucomalachite green host-guest interactions and potentiometric transduction is presented. The artificial host was imprinted in methacrylic acid or acrylamido-2-methyl-1-propanesulfonic acid-based polymers. Molecularly imprinted particles were dispersed in 2-nitrophenyloctyl ether and trapped in poly(vinyl chloride). The potentiometric sensors exhibited a near-Nernstianresponse in steady state evaluations, with slopes and detection limits ranging from 45.8 to 81.2 mVdecade-1and 0.28 to 1.01 μg mL-1, respectively. They were independent from the pH of test solutions within 3 to 5. Good selectivity was observed towards drugs that may contaminate water near fish cultures, such as oxycycline, doxycycline, enrofloxacin, trimethoprim, creatinine, chloramphenicol, and dopamine. The sensors were successfully applied to field monitoring of leucomalachite green in river samples. The method offered the advantages of simplicity, accuracy, applicability to colored and turbid samples, and automation feasibility.

Protein interactions with nanosized hydrotalcites of different composition

Nanosized hydrotalcite-like compounds (HTlc) with different chemical composition were prepared and used to study protein adsorption. Two soft proteins, myoglobin (Mb) and bovine serum albumin (BSA), were chosen to investigate the nature of the forces controlling the adsorption and how these depend on the chemical composition of the support. Both proteins strongly interact with HTlc exhibiting in most cases a Langmuir-type adsorption. Mb showed a higher affinity for Nickel Chromium (NiCr-HTlc) than for Nickel Aluminum (NiAl-HTlc), while for BSA no significant differences between supports were found. Adsorption experiments in the presence of additives showed that proteins exhibited different types of interactions onto the same HTlc surface and that the adsorption was strongly suppressed by the addition of disodium hydrogen phosphate (Na(2)HPO(4)). Atomic force microscopy images showed that the adsorption of both proteins onto nanoparticles was followed by the aggregation of biocomposites, with a more disordered structure for BSA. Fluorescence measurements for adsorbed Mb showed that the inorganic nanoparticles induced conformational changes in the biomolecules; in particular, the interactions with HTlc surface quenched the tryptophan fluorescence and this process was particularly efficient for NiCr-HTlc. The adsorption of BSA onto the HTlc nanoparticles induced a selective quenching of the exposed fluorescent residues, as indicated by the blue-shift of the emission spectra of tryptophan residues and by the shortening of the fluorescence decay times.

Effect of emulsion polymerization and magnetic field on the adsorption of albumin on poly(methyl methacrylate)-based biomaterial surfaces

The adsorption of bovine serum albumin (BSA) onto the surfaces of poly(methyl methacrylate) (PMMA) and of methyl methacrylate copolymer with 2,3-epoxypropyl methacrylate, it was investigated. The polymeric matrices were obtained through radical emulsion polymerization with and without the presence of a continuous external magnetic field (MF) of 1,500 Gs intensity. Two types of surfactant agents were used for polymers' synthesis: a classic one sodium lauryl sulphate (SLS) and beta-cyclodextrin (CD). The protein adsorption was conducted in the presence as well as in the absence of MF, by varying the coupling conditions, respectively, the temperature, pH and albumin/polymer ratio. The study underlines the assistance of MF during the adsorption process, materialized into growth of the BSA adsorbed quantity. Thus, MF presence during adsorption determines the doubling of the BSA adsorbed quantity onto the surface of polymers prepared in the MF. The adsorption process was also related to the tensioactive used for the synthesis of polymeric matrices. The higher content of the adsorbed BSA corresponds to the polymers with CD instead of SLS. The fact was attributed to the catalytic activity of the MF, which determines the molecules distortions, the growth of distance interactions and the modifications of the angles between bonds, with benefit effect upon adsorption.

Biosorption of Cu2+ and Zn2+ by raw and autoclaved Rocella phycopsis

The behavior of Cu2+ and Zn2+ biosorption onto raw and modified Roccella phycopsis from aqueous solutions was studied. Modification process was applied by autoclavation at 121 degrees C for 30 min. The effects of pH, initial metal concentration and biosorbent dosage were investigated. The maximum Cu2+ biosorption was achieved at pH 5.0 and the maximum biosorption capacities of 31.5 and 37.8 mg/g were recorded for raw and modified biosorbent, respectively. In the case of Zn2+ biosorption, maximum biosorption capacities were obtained at pH 4.0 as 29.1 and 35.3 mg/g for raw and modified biosorbent, respectively. Biosorption of Zn2+ and Cu2+ on all form of R. phycopsis increased much quickly with increasing initial metal concentrations from 10 to 100 mg/L. After modification process, probable changes in the surface polarity of raw and modified R. phycopsis were investigated by contact angle measurements. As expected, R. phycopsis has a polar surface and shows a highest contact angle with water, while after autoclavation water contact angle of R. phycopsis was significantly decreased from 47.5 degrees to 34.4 degrees.

Adsorption and conformational change of myoglobin on biomimetic hydroxyapatite nanocrystals functionalized with alendronate

The chemical conjugation of bisphosphonates (BPs), specifically alendronate, to hydroxyapatite could be an effective means to impart to it fine-tuned bioactivity. Horse heart myoglobin (Mb), a well-characterized protein, has been adsorbed onto biomimetic hydroxyapatite nanocrystals (nHA) and onto the nHA/alendronate conjugate powdered samples. The obtained materials have potential use in bone implantation and as prospective drug-delivery devices. The kinetic absorption of Mb onto nHA is dramatically affected by its functionalization with alendronate. The covering of the nHA surface by alendronate inhibits the adsorption of myoglobin. The adsorption mechanisms of the protein were studied by spectroscopic techniques (UV-vis and surface-enhanced Raman spectroscopy). The results indicate that the protein changes conformation upon adsorption on the inorganic substrate. In particular, the interaction with nHA alters the coordination state of the iron in the heme through the formation of a hexacoordinated low-spin Mb heme, possibly involving the distal histidine. Instead, the covering of the nHA surface by alendronate does not adsorb the protein but preserves the coordination state of the heme moiety. This study could be of significance either in the field of biomaterials science, in particular, to fine tune a bone-specific drug delivery device and to test nHA as a new support for heterogeneous catalysis, improving the understating of enzyme immobilization.

Monodisperse polystyrene microspheres by dispersion copolymerization of styrene and other vinyl comonomers: characterization and protein adsorption properties

Dispersion polymerization is a very attractive method for preparing micron-size monodisperse polymeric microspheres. The applications of microspheres have been greatly extended by using comonomers. In the present study, five kinds of polystyrene microspheres of 4-6 microm in diameters bearing different surface functional groups were synthesized by copolymerization of styrene and various vinyl comonomers. Their surface physicochemical characteristics were examined, including average particle size and size distribution, concentration of surface functional groups, as well as hydrophobicity. Concentration of FT-IR spectra of different samples were also discussed. The effects of microspheres' surface physicochemical properties on the isotherms of adsorption and chemisorption of BSA were determined. The results show that microspheres bearing different surface function groups have different capacity of protein adsorption. Besides, since the protein adsorption behaviors were more complex than the ideal adsorption model, the isotherms could not fit Freundlich model very well. Possible reasons were discussed. Knowledge gained from these results may be utilized for rational design of carriers of receptors and antibodies used in solid-phase immunoassay, especially Scintillation proximity assay in High-throughput Screening.

Purification of the M flax-rust resistance protein expressed in Pichia pastoris

The M flax-rust resistance (R) gene is predicted to encode a 150-kDa protein of the Toll-interleukin-like receptor-nucleotide binding site-leucine rich repeat (TIR-NBS-LRR) class of plant disease resistance proteins and provides resistance against the Melampsora lini (flax rust) fungus carrying the AvrM avirulence gene. The extremely low level of this class of R proteins found in plant tissue has precluded their biochemical and structural analysis, and the study of these proteins has been largely restricted to genetic analyses and in vivo investigations. Here we report the production and purification of the M protein in the methalotrophic yeast, Pichia pastoris. Expression trials with five different constructs reveals optimum levels of soluble native M protein can be obtained as an N-terminally 9x His-tagged protein, in which the first 21 amino acids of the predicted wild-type protein are deleted. Expression was achieved using a high cell density fed-batch bioreactor culture at low temperature. M protein was purified to near homogeneity from whole-cell lysates using cation exchange, immobilised metal ion affinity chromatography and gel filtration with a final yield of approximately 3 mg of protein/1000 g wet weight of yeast cells lysed. The successful expression and purification of soluble M protein opens the way for biochemical and structural analysis of this class of important plant proteins.

Surface energy components of a dye-ligand immobilized pHEMA membranes: Effects of their molecular attracting forces for non-covalent interactions with IgG and HSA in aqueous media

In the present paper, we report the study of the adsorption behaviour of human immunoglobulin G (IgG), human serum albumin (HSA) and polyethylenimine (PEI) onto surfaces of Procion Green HE-4BD (PG) immobilized poly(hydroxyethylmethacrylate) (pHEMA) membranes. The adsorption behaviour of the IgG and HSA onto surfaces of the PG-PEI complexed membrane was also studied. Surface wettability and hydrophilicity of all the membranes were investigated by static contact angle measurements. The measurements of the contact angle to various test liquids, i.e., water, glycerol, formamide, diiodomethane (DIM) and ethylene glycol on the investigated membranes were made by sessile drop method. In accordance to the Young equation, the smaller the surface tension of the test liquid, the smaller becomes the contact angles measured on all the investigated membranes surfaces. The highest contact angles were obtained with water, whereas ethylene glycol gave the lowest contact angles for all the tested membranes. Component and parameters of the surface free energy of all the investigated membranes were calculated from measured contact angle values using two methods (the geometric mean by Fowkes and acid-base by van Oss). HSA adsorption was enhanced after complexation of PEI with the immobilized dye-ligand. The adsorption of proteins and PEI significantly changed both the contact angles and component of surface free energies of the investigated membranes.

Binding of chemicals to melanins re-examined: adsorption of some drugs to the surface of melanin particles

This work presents a first attempt to study the interaction of some drugs with melanins, realistically considered as solid aggregates of primary particles. This situation appears similar to the adsorption of organic molecules onto the surface of colloidal absorbers, as active carbon, zeolites or titanium dioxide. We have applied some of the most popular theoretical models used in technological applications with the aim to give a more realistic picture of the melanin-drug interaction responsible for some observed side effects in vivo. Moreover, this approach can simplify the problem of the search of the physical parameters dominating the binding processes, by reducing the phenomenon to a simple physisorption/chemisorption, at least in a first approximation. We have studied the binding to melanin of gentamicin, methotrexate and chlorpromazine, molecules with different physico-chemical and structural characteristics. Our study demonstrates the possibility to fit experimental adsorption data with Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich equations. In such a way we obtain binding parameters useful to characterize the drug-surface interaction in terms of energy and of mean affinity.

Adsorption of recombinant human bone morphogenetic protein rhBMP-2m onto hydroxyapatite

Recombinant human mature bone morphogenetic protein 2 (rhBMP-2m) has been expressed to study its adsorption onto precipitated hydroxyapatite (HA). The influence on the adsorption process of different parameters such as pH and concentrations of calcium, phosphate or NaCl has been investigated. Although the adsorption proceeds rapidly at the initial stages, the maximum adsorbed amount is reached after four hours. The process is notably influenced by adding calcium or phosphate to the system but, while calcium ions increase the adsorption of rhBMP-2m onto HA, phosphate ions inhibit it. The influence of pH and NaCl concentration are notable but less important than those of calcium and phosphate. The adsorption data fit well to a Langmuir adsorption isotherm. The values of the isotherm parameters have been calculated and discussed, and an adsorption mechanism has been proposed.

Removal of aniline from aqueous solution by PVC-CDAE ligand-exchanger

The adsorption of aniline from aqueous solutions onto cobalt(II)-poly(vinyl chloride)-carboxylated diaminoethane (PVC-CDAE) resin has been studied using a mini-column apparatus at 25+/-0.1 degrees C. First of all, experimental data obtained from the breakthrough curves were tested by using the Scatchard plot analysis, to have a preliminary prediction about the types of interaction of the resin with aniline. Our aim was to determine the model which best describes the experimental data. The aspect of the Scatchard plot indicated that the aniline adsorption did not follow the Langmuir model and the presence of two types of binding sites for aniline on the resin. However, the dynamics of aniline uptake were represented by the Freundlich model reasonably well. The kinetics of aniline adsorption from aqueous solution on the cobalt(II)-PVC-CDAE have also been tested using continuous column runs and rate-controlling step of the process was determined. In this study, homogeneous diffusion model was adapted to a column system to describe the change in the aniline concentration at the column exit beginning from breakthrough point as a function of time. Kinetic studies revealed that the rate-controlling step of the aniline adsorption was predominately film diffusion controlled rather particle diffusion.

Affinity membrane chromatography: relationship of dye-ligand type to surface polarity and their effect on lysozyme separation and purification

Two different dye-ligands, i.e. Procion Brown MX-5BR (RB-10) and Procion Green H-4G (RG-5) were immobilised onto poly(2-hydroxyethylmethacrylate) (pHEMA) membranes. The polarities of the affinity membranes were determined by contact angle measurements. Separation and purification of lysozyme from solution and egg white were investigated. The adsorption data was analysed using two adsorption kinetic models the first order and the second order to determine the best-fit equation for the separation of lysozyme using affinity membranes. The second-order equation for the adsorption of lysozyme on the RB-10 and RG-5 immobilised membranes systems is the most appropriate equation to predict the adsorption capacity for the affinity membranes. The reversible lysozyme adsorption on the RB-10 and RG-5 did not follow the Langmuir model, but obeyed the Temkin and Freundlich isotherm model. Separation and purification were monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purities of the eluted lysozyme, as determined by HPLC, were 76 and 92% with recovery 63 and 77% for RB-10 and RG-5 membranes, respectively. For the separation and purification of lysozyme the RG-5 immobilised membrane provided the best results. The affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated adsorption-elution cycles.