Force-induced conformational change of bacteriorhodopsin

Insights in Cell Biomechanics through Atomic Force Microscopy

We review the advances obtained by using Atomic Force Microscopy (AFM)-based approaches in the field of cell/tissue mechanics and adhesion, comparing the solutions proposed and critically discussing them. AFM offers a wide range of detectable forces with a high force sensitivity, thus allowing a broad class of biological issues to be addressed. Furthermore, it allows for the accurate control of the probe position during the experiments, providing spatially resolved mechanical maps of the biological samples with subcellular resolution. Nowadays, mechanobiology is recognized as a subject of great relevance in biotechnological and biomedical fields. Focusing on the past decade, we discuss the intriguing issues of cellular mechanosensing, i.e., how cells sense and adapt to their mechanical environment. Next, we examine the relationship between cell mechanical properties and pathological states, focusing on cancer and neurodegenerative diseases. We show how AFM has contributed to the characterization of pathological mechanisms and discuss its role in the development of a new class of diagnostic tools that consider cell mechanics as new tumor biomarkers. Finally, we describe the unique ability of AFM to study cell adhesion, working quantitatively and at the single-cell level. Again, we relate cell adhesion experiments to the study of mechanisms directly or secondarily involved in pathologies.

Single molecule kinetics of bacteriorhodopsin by HS-AFM

Bacteriorhodopsin is a seven-helix light-driven proton-pump that was structurally and functionally extensively studied. Despite a wealth of data, the single molecule kinetics of the reaction cycle remain unknown. Here, we use high-speed atomic force microscopy methods to characterize the single molecule kinetics of wild-type bR exposed to continuous light and short pulses. Monitoring bR conformational changes with millisecond temporal resolution, we determine that the cytoplasmic gate opens 2.9 ms after photon absorption, and stays open for proton capture for 13.2 ms. Surprisingly, a previously active protomer cannot be reactivated for another 37.6 ms, even under excess continuous light, giving a single molecule reaction cycle of ~20 s⁻¹. The reaction cycle slows at low light where the closed state is prolonged, and at basic or acidic pH where the open state is extended.

Here, the authors use high-speed atomic force microscopy (HS-AFM) methods to characterize the single molecule kinetics of wild-type bacteriorhodopsin (bR) with millisecond temporal resolution, providing new insights into the bR conformational cycle.

Insertion and activation of functional Bacteriorhodopsin in a floating bilayer

The proton pump transmembrane protein bacteriorhodopsin was successfully incorporated into planar floating lipid bilayers in gel and fluid phases, by applying a detergent-mediated incorporation method. The method was optimized on single supported bilayers by using quartz crystal microbalance, atomic force and fluorescence microscopy techniques. Neutron and X-ray reflectometry were used on both single and floating bilayers with the aim of determining the structure and composition of this membrane-protein system before and after protein reconstitution at sub-nanometer resolution. Lipid bilayer integrity and protein activity were preserved upon the reconstitution process. Reversible structural modifications of the membrane, induced by the bacteriorhodopsin functional activity triggered by visible light, were observed and characterized at the nanoscale.

Subnanometer-scale imaging of nanobio-interfaces by frequency modulation atomic force microscopy

Recently, there have been significant advancements in dynamic-mode atomic force microscopy (AFM) for biological applications. With frequency modulation AFM (FM-AFM), subnanometer-scale surface structures of biomolecules such as secondary structures of proteins, phosphate groups of DNAs, and lipid-ion complexes have been directly visualized. In addition, three-dimensional AFM (3D-AFM) has been developed by combining a high-resolution AFM technique with a 3D tip scanning method. This method enabled visualization of 3D distributions of water (i.e. hydration structures) with subnanometer-scale resolution on various biological molecules such as lipids, proteins, and DNAs. Furthermore, 3D-AFM also allows visualization of subnanometer-scale 3D distributions of flexible surface structures such as thermally fluctuating lipid headgroups. Such a direct local information at nano-bio interfaces can play a critical role in determining the atomic- or molecular-scale model to explain interfacial structures and functions. Here, we present an overview of these recent advancements in the dynamic-mode AFM techniques and their biological applications.

Imaging and Force Spectroscopy of Single Transmembrane Proteins with the Atomic Force Microscope

The atomic force microscope (AFM) has opened avenues and provided opportunities to investigate biological soft matter and processes ranging from nanometer (nm) to millimeter (mm). The high temporal (millisecond) and spatial (nanometer) resolutions of the AFM are suited for studying many biological processes in their native conditions. The AFM cantilever-aptly termed as a "lab on a tip"-can be used as an imaging tool as well as a handle to manipulate single bonds and proteins. Recent examples have convincingly established AFM as a tool to study the mechanical properties and monitor processes of single proteins and cells with high sensitivity, thus affording insight into important mechanistic details. This chapter specifically focuses on practical and analytical protocols of single-molecule AFM methodologies related to high-resolution imaging and single-molecule force spectroscopy of transmembrane proteins in a lipid bilayer (reconstituted or native). Both these techniques are operator oriented, and require specialized working knowledge of the instrument, theory and practical skills.

A practical review on the measurement tools for cellular adhesion force

Cell-cell and cell-matrix adhesions are fundamental in all multicellular organisms. They play a key role in cellular growth, differentiation, pattern formation and migration. Cell-cell adhesion is substantial in the immune response, pathogen-host interactions, and tumor development. The success of tissue engineering and stem cell implantations strongly depends on the fine control of live cell adhesion on the surface of natural or biomimetic scaffolds. Therefore, the quantitative and precise measurement of the adhesion strength of living cells is critical, not only in basic research but in modern technologies, too. Several techniques have been developed or are under development to quantify cell adhesion. All of them have their pros and cons, which has to be carefully considered before the experiments and interpretation of the recorded data. Current review provides a guide to choose the appropriate technique to answer a specific biological question or to complete a biomedical test by measuring cell adhesion.

A novel phase-shift-based amplitude detector for a high-speed atomic force microscope

In any atomic force microscope operated in amplitude modulation mode, aka "tapping mode" or "oscillating mode," the most crucial operation is the detection of the cantilever oscillation amplitude. Indeed, it is the change in the cantilever oscillation amplitude that drives the feedback loop, and thus, the accuracy and speed of amplitude detection are of utmost importance for improved atomic force microscopy operation. This becomes even more crucial for the operation of a high-speed atomic force microscope (HS-AFM), where feedback operation on a single or a low number of cantilever oscillation cycles between 500 kHz and 1000 kHz oscillation frequency is desired. So far, the amplitude detection was performed by Fourier analysis of each oscillation, resulting in a single output amplitude value at the end of each oscillation cycle, i.e., 360° phase delay. Here, we present a novel analog amplitude detection circuit with theoretic continuous amplitude detection at 90° phase delay. In factual operation, when exposed to an abrupt amplitude change, our novel amplitude detector circuit reacted with a phase delay of ∼138° compared with the phase delay of ∼682° achieved by the Fourier analysis method. Integrated to a HS-AFM, the novel amplitude detector should allow faster image acquisition with lower invasiveness due to the faster and more accurate detection of cantilever oscillation amplitude change.

Design and synthesis of new antitumor agents with the 1,7-epoxycyclononane framework. Study of their anticancer action mechanism by a model compound

This article describes the design, synthesis and biological evaluation of a new family of antitumor agents having the 1,7-epoxycyclononane framework. We have developed a versatile synthetic methodology that allows the preparation of a chemical library with structural diversity and in good yield. The synthetic methodology has been scaled up to the multigram level and can be developed in an enantioselective fashion. The study in vitro of a model compound, in front of the cancer cell lines HL-60 and MCF-7, showed a growth inhibitory effect better than that of cisplatin. The observation of cancer cells by fluorescence microscopy showed the presence of apoptotic bodies and a degradation of microtubules. The study of cell cycle and mechanism of death of cancer cells by flow cytometry indicates that the cell cycle arrested at the G₀/G₁ phase and that the cells died by apoptosis preferably over necrosis. A high percentage of apoptotic cells at the subG₀/G₁ level was observed. This indicates that our model compound does not behave as an antimitotic agent like nocodazole, used as a reference, which arrests the cell cycle at G₂/M phase. The interaction of anticancer agents with DNA molecules was evaluated by atomic force microscopy, circular dichroism and electrophoresis on agarose gel. The results indicate that the model compound has not DNA as a target molecule. The in silico study of the model compound showed a potential good oral bioavailability.

Single-Molecule Force Spectroscopy of Transmembrane β-Barrel Proteins

Single-molecule force spectroscopy (SMFS) has been widely applied to study the mechanical unfolding and folding of transmembrane proteins. Here, we review the recent progress in characterizing bacterial and human transmembrane β-barrel proteins by SMFS. First, we describe the mechanical unfolding of transmembrane β-barrels, which follows a general mechanism dictated by the sequential unfolding and extraction of individual β-strands and β-hairpins from membranes. Upon force relaxation, the unfolded polypeptide can insert stepwise into the membrane as single β-strands or β-hairpins to fold as the native β-barrel. The refolding can be followed at a high spatial and temporal resolution, showing that small β-barrels are able to fold without assistance, whereas large and complex β-barrels require chaperone cofactors. Applied in the dynamic mode, SMFS can quantify the kinetic and mechanical properties of single β-hairpins and reveal complementary insight into the membrane protein structure and function relationship. We further outline the challenges that SMFS experiments must overcome for a comprehensive understanding of the folding and function of transmembrane β-barrel proteins.

Compressive Force Spectroscopy: From Living Cells to Single Proteins

One of the most successful applications of atomic force microscopy (AFM) in biology involves monitoring the effect of force on single biological molecules, often referred to as force spectroscopy. Such studies generally entail the application of pulling forces of different magnitudes and velocities upon individual molecules to resolve individualistic unfolding/separation pathways and the quantification of the force-dependent rate constants. However, a less recognized variation of this method, the application of compressive force, actually pre-dates many of these "tensile" force spectroscopic studies. Further, beyond being limited to the study of single molecules, these compressive force spectroscopic investigations have spanned samples as large as living cells to smaller, multi-molecular complexes such as viruses down to single protein molecules. Correspondingly, these studies have enabled the detailed characterization of individual cell states, subtle differences between seemingly identical viral structures, as well as the quantification of rate constants of functionally important, structural transitions in single proteins. Here, we briefly review some of the recent achievements that have been obtained with compressive force spectroscopy using AFM and highlight exciting areas of its future development.

High-Resolution Imaging and Multiparametric Characterization of Native Membranes by Combining Confocal Microscopy and an Atomic Force Microscopy-Based Toolbox

To understand how membrane proteins function requires characterizing their structure, assembly, and inter- and intramolecular interactions in physiologically relevant conditions. Conventionally, such multiparametric insight is revealed by applying different biophysical methods. Here we introduce the combination of confocal microscopy, force-distance curve-based (FD-based) atomic force microscopy (AFM), and single-molecule force spectroscopy (SMFS) for the identification of native membranes and the subsequent multiparametric analysis of their membrane proteins. As a well-studied model system, we use native purple membrane from Halobacterium salinarum, whose membrane protein bacteriorhodopsin was His-tagged to bind nitrilotriacetate (NTA) ligands. First, by confocal microscopy we localize the extracellular and cytoplasmic surfaces of purple membrane. Then, we apply AFM to image single bacteriorhodopsins approaching sub-nanometer resolution. Afterwards, the binding of NTA ligands to bacteriorhodopsins is localized and quantified by FD-based AFM. Finally, we apply AFM-based SMFS to characterize the (un)folding of the membrane protein and to structurally map inter- and intramolecular interactions. The multimethodological approach is generally applicable to characterize biological membranes and membrane proteins at physiologically relevant conditions.

Detecting Ligand-Binding Events and Free Energy Landscape while Imaging Membrane Receptors at Subnanometer Resolution

Force-distance curve-based atomic force microscopy has emerged into a sophisticated technique for imaging cellular membranes and for detecting specific ligand-binding events of native membrane receptors. However, so far the resolution achieved has been insufficient to structurally map ligand-binding sites onto membrane proteins. Here, we introduce experimental and theoretical approaches for overcoming this limitation. To establish a structurally and functionally well-defined reference sample, we engineer a ligand-binding site to the light-driven proton pump bacteriorhodopsin of purple membrane. Functionalizing the AFM stylus with an appropriate linker-system tethering the ligand and optimizing the AFM conditions allows for imaging the engineered bacteriorhodopsin at subnanometer resolution while structurally mapping the specific ligand-receptor binding events. Improved data analysis allows reconstructing the ligand-binding free energy landscape from the experimental data, thus providing thermodynamic and kinetic insight into the ligand-binding process. The nanoscopic method introduced is generally applicable for imaging receptors in native membranes at subnanometer resolution and for systematically mapping and quantifying the free energy landscape of ligand binding.

Unraveling the Pore-Forming Steps of Pneumolysin from Streptococcus pneumoniae

Pneumolysin (PLY) is the main virulence factor of Streptococcus pneumoniae that causes pneumonia, meningitis, and invasive pneumococcal infection. PLY is produced as monomers, which bind to cholesterol-containing membranes, where they oligomerize into large pores. To investigate the pore-forming mechanism, we determined the crystal structure of PLY at 2.4 Å and used it to design mutants on the surface of monomers. Electron microscopy of liposomes incubated with PLY mutants revealed that several mutations interfered with ring formation. Mutants that formed incomplete rings or linear arrays had strongly reduced hemolytic activity. By high-resolution time-lapse atomic force microscopy of wild-type PLY, we observed two different ring-shaped complexes. Most of the complexes protruded ∼8 nm above the membrane surface, while a smaller number protruded ∼11 nm or more. The lower complexes were identified as pores or prepores by the presence or absence of a lipid bilayer in their center. The taller complexes were side-by-side assemblies of monomers of soluble PLY that represent an early form of the prepore. Our observations suggest a four-step mechanism of membrane attachment and pore formation by PLY, which is discussed in the context of recent structural models. The functional separation of these steps is necessary for the understanding how cholesterol-dependent cytolysins form pores and lyse cells.

Assemblies of pore-forming toxins visualized by atomic force microscopy

A number of pore-forming toxins (PFTs) can assemble on lipid membranes through their specific interactions with lipids. The oligomeric assemblies of some PFTs have been successfully revealed either by electron microscopy (EM) and/or atomic force microscopy (AFM). Unlike EM, AFM imaging can be performed under physiological conditions, enabling the real-time visualization of PFT assembly and the transition from the prepore state, in which the toxin does not span the membrane, to the pore state. In addition to characterizing PFT oligomers, AFM has also been used to examine toxin-induced alterations in membrane organization. In this review, we summarize the contributions of AFM to the understanding of both PFT assembly and PFT-induced membrane reorganization. This article is part of a Special Issue entitled: Pore-Forming Toxins edited by Mauro Dalla Serra and Franco Gambale.

Glass is a Viable Substrate for Precision Force Microscopy of Membrane Proteins

Though ubiquitous in optical microscopy, glass has long been overlooked as a specimen supporting surface for high resolution atomic force microscopy (AFM) investigations due to its roughness. Using bacteriorhodopsin from Halobacterium salinarum and the translocon SecYEG from Escherichia coli, we demonstrate that faithful images of 2D crystalline and non-crystalline membrane proteins in lipid bilayers can be obtained on microscope cover glass following a straight-forward cleaning procedure. Direct comparison between AFM data obtained on glass and on mica substrates show no major differences in image fidelity. Repeated association of the ATPase SecA with the cytoplasmic protrusion of SecYEG demonstrates that the translocon remains competent for binding after tens of minutes of continuous AFM imaging. This opens the door for precision long-timescale investigations of the active translocase in near-native conditions and, more generally, for integration of high resolution biological AFM with many powerful optical techniques that require non-birefringent substrates.

High-resolution atomic force microscopy imaging of rhodopsin in rod outer segment disk membranes

Atomic force microscopy (AFM) is a powerful imaging technique that allows recording topographical information of membrane proteins under near-physiological conditions. Remarkable results have been obtained on membrane proteins that were reconstituted into lipid bilayers. High-resolution AFM imaging of native disk membranes from vertebrate rod outer segments has unveiled the higher-order oligomeric state of the G protein-coupled receptor rhodopsin, which is highly expressed in disk membranes. Based on AFM imaging, it has been demonstrated that rhodopsin assembles in rows of dimers and paracrystals and that the rhodopsin dimer is the fundamental building block of higher-order structures.

Localizing chemical groups while imaging single native proteins by high-resolution atomic force microscopy

Simultaneous high-resolution imaging and localization of chemical interaction sites on single native proteins is a pertinent biophysical, biochemical, and nanotechnological challenge. Such structural mapping and characterization of binding sites is of importance in understanding how proteins interact with their environment and in manipulating such interactions in a plethora of biotechnological applications. Thus far, this challenge remains to be tackled. Here, we introduce force-distance curve-based atomic force microscopy (FD-based AFM) for the high-resolution imaging of SAS-6, a protein that self-assembles into cartwheel-like structures. Using functionalized AFM tips bearing Ni(2+)-N-nitrilotriacetate groups, we locate specific interaction sites on SAS-6 at nanometer resolution and quantify the binding strength of the Ni(2+)-NTA groups to histidine residues. The FD-based AFM approach can readily be applied to image any other native protein and to locate and structurally map histidine residues. Moreover, the surface chemistry used to functionalize the AFM tip can be modified to map other chemical interaction sites.

Ultrastable atomic force microscopy: improved force and positional stability

Atomic force microscopy (AFM) is an exciting technique for biophysical studies of single molecules, but its usefulness is limited by instrumental drift. We dramatically reduced positional drift by adding two lasers to track and thereby actively stabilize the tip and the surface. These lasers also enabled label-free optical images that were spatially aligned to the tip position. Finally, sub-pN force stability over 100 s was achieved by removing the gold coating from soft cantilevers. These enhancements to AFM instrumentation can immediately benefit research in biophysics and nanoscience.

Atomic force microscopy with sub-picoNewton force stability for biological applications

Atomic force microscopy (AFM) is widely used in the biological sciences. Despite 25 years of technical developments, two popular modes of bioAFM, imaging and single molecule force spectroscopy, remain hindered by relatively poor force precision and stability. Recently, we achieved both sub-pN force precision and stability under biologically useful conditions (in liquid at room temperature). Importantly, this sub-pN level of performance is routinely accessible using a commercial cantilever on a commercial instrument. The two critical results are that (i) force precision and stability were limited by the gold coating on the cantilevers, and (ii) smaller yet stiffer cantilevers did not lead to better force precision on time scales longer than 25 ms. These new findings complement our previous work that addressed tip-sample stability. In this review, we detail the methods needed to achieve this sub-pN force stability and demonstrate improvements in force spectroscopy and imaging when using uncoated cantilevers. With this improved cantilever performance, the widespread use of nonspecific biomolecular attachments becomes a limiting factor in high-precision studies. Thus, we conclude by briefly reviewing site-specific covalent-immobilization protocols for linking a biomolecule to the substrate and to the AFM tip.

Nanomechanical properties of proteins and membranes depend on loading rate and electrostatic interactions

Knowing the dynamic mechanical response of tissue, cells, membranes, proteins, nucleic acids, and carbohydrates to external perturbations is important to understand various biological and biotechnological problems. Atomic force microscopy (AFM)-based approaches are the most frequently used nanotechnologies to determine the mechanical properties of biological samples that range in size from microscopic to (sub)nanoscopic. However, the dynamic nature of biomechanical properties has barely been addressed by AFM imaging. In this work, we characterizethe viscoelastic properties of the native light-driven proton pump bacteriorhodopsin of the purple membrane of Halobacterium salinarum. Using force-distance curve (F-D)-based AFM we imaged purple membranes while force probing their mechanical response over a wide range of loading rates (from ∼0.5 to 100 μN/s). Our results show that the mechanical stiffness of protein and membrane increases with the loading rate up to a factor of 10 (from ∼0.3 to 3.2 N/m). In addition, the electrostatic repulsion between AFM tip and sample can alter the mechanical stiffness measured by AFM up to ∼60% (from ∼0.8 to 1.3 N/m).These findings indicate that the mechanical response of membranes and proteins and probably of other biomolecular systems should be determined at different loading rates to fully understand their properties.

Intersubunit coordination and cooperativity in ring-shaped NTPases

Ring-shaped nucleoside triphosphatases (ring NTPases) are biological molecular machines powered by energy from NTP hydrolysis and are responsible for various cellular activities. These ring NTPases translocate their substrates or rotate their own subunits to/in the hole of the ring. Coordination and cooperativity among subunits in the oligomer ring is a topic of debate focused on understanding the operation mechanism of these protein machines. With the help of X-ray crystallographic structural analysis and optical microscopic single-molecules studies, distinct models, including stochastic, concerted, and rotary catalysis have been proposed. Here, we discuss these models and introduce high-speed atomic force microscopy as a new potent tool for verification of the model, with our recent example of the rotary catalysis of the stator ring of F1-adenosine triphosphatase.

Reconstitution of homomeric GluA2(flop) receptors in supported lipid membranes: functional and structural properties

AMPA receptors (AMPARs) are glutamate-gated ion channels ubiquitous in the vertebrate central nervous system, where they mediate fast excitatory neurotransmission and act as molecular determinants of memory formation and learning. Together with detailed analyses of individual AMPAR domains, structural studies of full-length AMPARs by electron microscopy and x-ray crystallography have provided important insights into channel assembly and function. However, the correlation between the structure and functional states of the channel remains ambiguous particularly because these functional states can be assessed only with the receptor bound within an intact lipid bilayer. To provide a basis for investigating AMPAR structure in a membrane environment, we developed an optimized reconstitution protocol using a receptor whose structure has previously been characterized by electron microscopy. Single-channel recordings of reconstituted homomeric GluA2(flop) receptors recapitulate key electrophysiological parameters of the channels expressed in native cellular membranes. Atomic force microscopy studies of the reconstituted samples provide high-resolution images of membrane-embedded full-length AMPARs at densities comparable to those in postsynaptic membranes. The data demonstrate the effect of protein density on conformational flexibility and dimensions of the receptors and provide the first structural characterization of functional membrane-embedded AMPARs, thus laying the foundation for correlated structure-function analyses of the predominant mediators of excitatory synaptic signals in the brain.

Atomic force microscopy and spectroscopy to probe single membrane proteins in lipid bilayers

The atomic force microscope (AFM) has opened vast avenues hitherto inaccessible to the biological scientist. The high temporal (millisecond) and spatial (nanometer) resolutions of the AFM are suited for studying many biological processes in their native conditions. The AFM cantilever stylus is aptly termed as a "lab on a tip" owing to its versatility as an imaging tool as well as a handle to manipulate single bonds and proteins. Recent examples assert that the AFM can be used to study the mechanical properties and monitor processes of single proteins and single cells, thus affording insight into important mechanistic details. This chapter specifically focuses on practical and analytical protocols of single-molecule AFM methodologies related to high-resolution imaging and single-molecule force spectroscopy of membrane proteins. Both these techniques are operator oriented, and require specialized working knowledge of the instrument, theoretical, and practical skills.

Heteroepitaxial streptavidin nanocrystals reveal critical role of proton "fingers" and subsurface atoms in determining adsorbed protein orientation

Characterization of noncovalent interactions between nanometer-sized structures, such as proteins, and solid surfaces is a subject of intense interest of late owing to the rapid development of numerous solid materials for medical and technological applications. Yet the rational design of these surfaces to promote the adsorption of specific nanoscale complexes is hindered by a lack of an understanding of the noncovalent interactions between nanostructures and solid surfaces. Here we take advantage of the unexpected observation of two-dimensional nanocrystals of streptavidin on muscovite mica to provide details of the streptavidin-mica interface. Analysis of atomic force microscopic images together with structural modeling identifies six positively charged residues whose terminal amine locations match the positions of the single atom-sized anionic cavities in the basal mica surface to within 1 Å. Moreover, we find that the streptavidin crystallites are oriented only along a single direction on this surface and not in either of three different directions as they must be if the protein interacted solely with the 3-fold symmetric basal surface atoms. Hence, this broken symmetry indicates that the terminal amine protons must also interact directly with the subsurface hydroxide atoms that line the bottom of these anionic cavities and generate only a single axis of symmetry. Thus, in total, these results reveal that subsurface atoms can have a significant influence on protein adsorption and orientation and identify the insertion of proton "fingers" as a means by which proteins may generally interact with solid surfaces.

Force-induced formation and propagation of adhesion nanodomains in living fungal cells

Understanding how cell adhesion proteins form adhesion domains is a key challenge in cell biology. Here, we use single-molecule atomic force microscopy (AFM) to demonstrate the force-induced formation and propagation of adhesion nanodomains in living fungal cells, focusing on the covalently anchored cell-wall protein Als5p from Candida albicans. We show that pulling on single adhesins with AFM tips terminated with specific antibodies triggers the formation of adhesion domains of 100-500 nm and that the force-induced nanodomains propagate over the entire cell surface. Control experiments (with cells lacking Als5p, single-site mutation in the protein, bare tips, and tips modified with irrelevant antibodies) demonstrate that Als5p nanodomains result from protein redistribution triggered by force-induced conformational changes in the initially probed proteins, rather than from nonspecific cell-wall perturbations. Als5p remodeling is independent of cellular metabolic activity because heat-killed cells show the same behavior as live cells. Using AFM and fluorescence microscopy, we also find that nanodomains are formed within ∼30 min and migrate at a speed of ∼20 nm·min(-1), indicating that domain formation and propagation are slow, time-dependent processes. These results demonstrate that mechanical stimuli can trigger adhesion nanodomains in fungal cells and suggest that the force-induced clustering of adhesins may be a mechanism for activating cell adhesion.

Applications of atomic force microscopy in biophysical chemistry of cells

This article addresses the question of what information and new insights atomic force microscopy (AFM) provides that are of importance and relevance to cellular biophysical chemistry research. Three enabling aspects of AFM are discussed: (a) visualization of membrane structural features with nanometer resolution, such as microvilli, ridges, porosomes, lamellapodia, and filopodia; (b) revealing structural evolution associated with cellular signaling pathways by time-dependent and high-resolution imaging of the cellular membrane in correlation with intracellular components from simultaneous optical microscopy; and (c) qualitative and quantitative measurements of single cell mechanics by acquisition of force-deformation profiles and extraction of Young's moduli for the membrane as well as cytoskeleton. A future prospective of AFM is also presented.

Complexes between photoactivated rhodopsin and transducin: progress and questions

Activation of GPCRs (G-protein-coupled receptors) leads to conformational changes that ultimately initiate signal transduction. Activated GPCRs transiently combine with and activate heterotrimeric G-proteins resulting in GTP replacement of GDP on the G-protein alpha subunit. Both the detailed structural changes essential for productive GDP/GTP exchange on the G-protein alpha subunit and the structure of the GPCR-G-protein complex itself have yet to be elucidated. Nevertheless, transient GPCR-G-protein complexes can be trapped by nucleotide depletion, yielding an empty-nucleotide G-protein-GPCR complex that can be isolated. Whereas early biochemical studies indicated formation of a complex between G-protein and activated receptor only, more recent results suggest that G-protein can bind to pre-activated states of receptor or even couple transiently to non-activated receptor to facilitate rapid responses to stimuli. Efficient and reproducible formation of physiologically relevant, conformationally homogenous GPCR-G-protein complexes is a prerequisite for structural studies designed to address these possibilities.

Automated setpoint adjustment for biological contact mode atomic force microscopy imaging

Contact mode atomic force microscopy (AFM) is the most frequently used AFM imaging mode in biology. It is about 5-10 times faster than oscillating mode imaging (in conventional AFM setups), and provides topographs of biological samples with sub-molecular resolution and at a high signal-to-noise ratio. Unfortunately, contact mode imaging is sensitive to the applied force and intrinsic force drift: inappropriate force applied by the AFM tip damages the soft biological samples. We present a methodology that automatically searches for and maintains high resolution imaging forces. We found that the vertical and lateral vibrations of the probe during scanning are valuable signals for the characterization of the actual applied force by the tip. This allows automated adjustment and correction of the setpoint force during an experiment. A system that permanently performs this methodology steered the AFM towards high resolution imaging forces and imaged purple membrane at molecular resolution and live cells at high signal-to-noise ratio for hours without an operator.

Atomic force microscopy of biological membranes

Atomic force microscopy (AFM) is an ideal method to study the surface topography of biological membranes. It allows membranes that are adsorbed to flat solid supports to be raster-scanned in physiological solutions with an atomically sharp tip. Therefore, AFM is capable of observing biological molecular machines at work. In addition, the tip can be tethered to the end of a single membrane protein, and forces acting on the tip upon its retraction indicate barriers that occur during the process of protein unfolding. Here we discuss the fundamental limitations of AFM determined by the properties of cantilevers, present aspects of sample preparation, and review results achieved on reconstituted and native biological membranes.

Past, present and future of atomic force microscopy in life sciences and medicine

To introduce this special issue of the Journal of Molecular Recognition dedicated to the applications of atomic force microscopy (AFM) in life sciences, this paper presents a short summary of the history of AFM in biology. Based on contributions from the first international conference of AFM in biological sciences and medicine (AFM BioMed Barcelona, 19-21 April 2007), we present and discuss recent progress made using AFM for studying cells and cellular interactions, probing single molecules, imaging biosurfaces at high resolution and investigating model membranes and their interactions. Future prospects in these different fields are also highlighted.

Hydration dependence of active core fluctuations in bacteriorhodopsin

We used neutron scattering and specific hydrogen-deuterium labeling to investigate the thermal dynamics of isotope-labeled amino acids and retinal, predominantly in the active core and extracellular moiety of bacteriorhodopsin (BR) in the purple membrane and the dynamical response to hydration. Measurements on two neutron spectrometers allowed two populations of motions to be characterized. The lower amplitude motions were found to be the same for both the labeled amino acids and retinal of BR and the global membrane. The larger amplitude dynamics of the labeled part, however, were found to be more resilient than the average membrane, suggesting their functional importance. The response to hydration was characterized, showing that the labeled part of BR is not shielded from hydration effects. The results suggest that the inhibition of high-amplitude motions by lowering hydration may play a key role in the slowing down of the photocycle and the proton pumping activity of BR.

Vertebrate membrane proteins: structure, function, and insights from biophysical approaches

Membrane proteins are key targets for pharmacological intervention because they are vital for cellular function. Here, we analyze recent progress made in the understanding of the structure and function of membrane proteins with a focus on rhodopsin and development of atomic force microscopy techniques to study biological membranes. Membrane proteins are compartmentalized to carry out extra- and intracellular processes. Biological membranes are densely populated with membrane proteins that occupy approximately 50% of their volume. In most cases membranes contain lipid rafts, protein patches, or paracrystalline formations that lack the higher-order symmetry that would allow them to be characterized by diffraction methods. Despite many technical difficulties, several crystal structures of membrane proteins that illustrate their internal structural organization have been determined. Moreover, high-resolution atomic force microscopy, near-field scanning optical microscopy, and other lower resolution techniques have been used to investigate these structures. Single-molecule force spectroscopy tracks interactions that stabilize membrane proteins and those that switch their functional state; this spectroscopy can be applied to locate a ligand-binding site. Recent development of this technique also reveals the energy landscape of a membrane protein, defining its folding, reaction pathways, and kinetics. Future development and application of novel approaches during the coming years should provide even greater insights to the understanding of biological membrane organization and function.

Atomic force microscopy and spectroscopy of native membrane proteins

Membrane proteins comprise 30% of the proteome of higher organisms. They mediate energy conversion, signal transduction, solute transport and secretion. Their native environment is a bilayer in a physiological buffer solution, hence their structure and function are preferably assessed in this environment. The surface structure of single membrane proteins can be determined in buffer solutions by atomic force microscopy (AFM) at a lateral resolution of less than 1 nm and a vertical resolution of 0.1-0.2 nm. Moreover, single proteins can be directly addressed, stuck to the AFM stylus and subsequently unfolded, revealing the molecular interactions of the protein studied. The examples discussed here illustrate the power of AFM in the structural analysis of membrane proteins in a native environment.

Structural models of the supramolecular organization of AQP0 and connexons in junctional microdomains

Membrane proteins perform many essential cellular functions. Over the last years, substantial advances have been made in our understanding of the structure and function of isolated membrane proteins. However, like soluble proteins, many membrane proteins assemble into supramolecular complexes that perform specific functions in specialized membrane domains. Since supramolecular complexes of membrane proteins are difficult to study by conventional approaches, little is known about their composition, organization and assembly. The high signal-to-noise ratio of the images that can be obtained with an atomic force microscope (AFM) makes this instrument a powerful tool to image membrane protein complexes within native membranes. Recently, we have reported high-resolution topographs of junctional microdomains in native eye lens membranes containing two-dimensional (2D) arrays of aquaporin-0 (AQP0) surrounded by connexons. While both proteins are involved in cell adhesion, AQP0 is a specific water channel whereas connexons form cell-cell communication channels with broad substrate specificity. Here, we have performed a detailed analysis of the supramolecular organization of AQP0 tetramers and connexon hexamers in junctional microdomains in the native lens membrane. We present first structural models of these junctional microdomains, which we generated by docking atomic models of AQP0 and connexons into the AFM topographs. The AQP0 2D arrays in the native membrane show the same molecular packing of tetramers seen in highly ordered double-layered 2D crystals obtained through reconstitution of purified AQP0. In contrast, the connexons that surround the AQP0 arrays are only loosely packed. Based on our AFM observations, we propose a mechanism that may explain the supramolecular organization of AQP0 and connexons in junctional domains in native lens membranes.

Direct observation of protein motion during the photochemical reaction cycle of bacteriorhodopsin

Platinum-coated, conductive atomic force microscope cantilevers were used to deposit electrophoretically purple membranes from Halobacterium salinarum on the bottom part of the cantilevers. By illuminating the bacteriorhodopsin-containing purple membranes, the protein goes through its photochemical reaction cycle, during which a conformational change happens in the protein, changing its shape and size. The size change of the protein acts upon the cantilever by causing its deflection, which can be monitored by the detection system of the atomic force microscope. The shape of the signal, the action spectrum of the deflection amplitude, and the blue light inhibition of the deflection all prove that the origin of the signal is the conformational change arising in the bacteriorhodopsin during the photocycle. From the size of the signal, the magnitude of the protein motion could be estimated. Using polarized light, the orientation of the motion was determined, relative to the transition moment of the retinal.

Creating ultrathin nanoscopic collagen matrices for biological and biotechnological applications

The biofunctionalization of materials creates interfaces on which proteins, cells, or tissues can fulfill native or desired tasks. Here we report how to control the assembly of type I collagen into well-defined nanoscopic matrices of different patterns. Collagen fibrils in these ultrathin (approximately 3 nm) matrices maintained their native structure as observed in vivo. This opens up the possibility to create programmable biofunctionalized matrices using collagen-binding proteins or proteins fused with collagen-binding domains. Applied to eukaryotic cells, these nanostructured matrices can direct cellular processes such as adhesion, orientation and migration.

Atomic force microscopy applied to study macromolecular content of embedded biological material

We demonstrate that atomic force microscopy represents a powerful tool for the estimation of structural preservation of biological samples embedded in epoxy resin, in terms of their macromolecular distribution and architecture. The comparison of atomic force microscopy (AFM) and transmission electron microscopy (TEM) images of a biosample (Caenorhabditis elegans) prepared following to different types of freeze-substitution protocols (conventional OsO4 fixation, epoxy fixation) led to the conclusion that high TEM stainability of the sample results from a low macromolecular density of the cellular matrix. We propose a novel procedure aimed to obtain AFM and TEM images of the same particular organelle, which strongly facilitates AFM image interpretation and reveals new ultrastructural aspects (mainly protein arrangement) of a biosample in addition to TEM data.

Nanoscale exploration of microbial surfaces using the atomic force microscope

Atomic force microscopy (AFM) has recently opened a variety of novel possibilities for imaging and manipulating microbial surfaces in their native environment. While AFM imaging offers a means to visualize surface structures at high resolution and in physiological conditions, AFM force spectroscopy enables researchers to probe a variety of properties, including the unfolding pathways of single-membrane proteins, the elasticity of cell walls and surface macromolecules, and the molecular forces responsible for cell–cell and cell–solid interactions. These nanoscale analyses enable us to answer a number of questions that were difficult to address previously, such as: how does the surface architecture of microbes change as they grow or interact with antibiotics; what is the force required to unfold and extract a single membrane protein; and what are the molecular forces driving the interaction between a pathogen and a host or biomaterial surface? This review will expand on these issues.

Immobilization and AFM of single 4×6-mer tarantula hemocyanin molecules

The high molecular mass respiratory protein of the tarantula Eurypelma californicum, a 4 x 6-mer hemocyanin, was investigated by atomic force microscopy (AFM). Various substrates and methods were evaluated for immobilization of individual hemocyanin molecules on a solid surface. Samples were imaged after physisorption on mica and self-assembled monolayers, and after chemisorption on Au(111) and N-hydroxy-succinimide (NHS) functionalized surfaces. AFM measurements were carried out preferable in solution and contact mode, but also in Tapping mode and on air-dried samples. Adsorption of the protein on mica followed by drying and carrying out the measurements in Tapping mode gave the best results. In the AFM images the four hexamers of the native 4 x 6-mer hemocyanin have been defined. The results were compared with independent available structural data and represent a validation case for this technique applied for the first time on such giant and complex molecules. As observable in images taken by transmission electron microscopy and also proposed from SAXS data, 4 x 6-mers could be found where the half-molecules are tilted against each other. This study is a step in resolving conformational heterogeneities, involved in oxygen binding of hemocyanins, at the single-molecule level by AFM.

Characterizing folding, structure, molecular interactions and ligand gated activation of single sodium/proton antiporters

Using the example of sodium/proton antiporter from Escherichia coli NhaA, we review the capabilities of single-molecule atomic force microscopy and force spectroscopy to observe structural and functional insights of a membrane protein, which are not attainable by other traditional methods. While atomic force microscopy provides high-resolution topographs of single membrane proteins, their oligomeric state and assembly, single-molecule force spectroscopy experiments detect molecular interactions of the protein. The sensitivity of this method makes it possible to detect and locate interactions that stabilize secondary structures such as transmembrane alpha-helices, polypeptide loops and segments within them. Controlled refolding experiments using single-molecule force spectroscopy observed individual secondary structure segments folding into the functional protein. Various folding pathways of NhaA were detected, each one exhibiting a certain probability to be taken. Time-lapse refolding experiments enabled determining the folding kinetics and hierarchy of individual secondary structural elements. Recent examples detected and located the ligand binding of an antiporter. Similarly, inhibitor binding and location can be detected which in future may guide towards comparative studies of agonist and antagonist altering the functional state of a membrane protein. We review current and future potentials of these approaches to characterize the action of pharmacological molecules on the antiporter function.