Branch-site selection in a group II intron mediated by active recognition of the adenine amino group and steric exclusion of non-adenine functionalities

Structural basis of branching during RNA splicing

Branching is a critical step in RNA splicing that is essential for 5' splice site selection. Recent spliceosome structures have led to competing models for the recognition of the invariant adenosine at the branch point. However, there are no structures of any splicing complex with the adenosine nucleophile docked in the active site and positioned to attack the 5' splice site. Thus we lack a mechanistic understanding of adenosine selection and splice site recognition during RNA splicing. Here we present a cryo-electron microscopy structure of a group II intron that reveals that active site dynamics are coupled to the formation of a base triple within the branch-site helix that positions the 2'-OH of the adenosine for nucleophilic attack on the 5' scissile phosphate. This structure, complemented with biochemistry and comparative analyses to splicing complexes, supports a base triple model of adenosine recognition for branching within group II introns and the evolutionarily related spliceosome.

Structural insights into intron catalysis and dynamics during splicing

The group II intron ribonucleoprotein is an archetypal splicing system with numerous mechanistic parallels to the spliceosome, including excision of lariat introns1,2. Despite the importance of branching in RNA metabolism, structural understanding of this process has remained elusive. Here we present a comprehensive analysis of three single-particle cryogenic electron microscopy structures captured along the splicing pathway. They reveal the network of molecular interactions that specifies the branchpoint adenosine and positions key functional groups to catalyse lariat formation and coordinate exon ligation. The structures also reveal conformational rearrangements of the branch helix and the mechanism of splice site exchange that facilitate the transition from branching to ligation. These findings shed light on the evolution of splicing and highlight the conservation of structural components, catalytic mechanism and dynamical strategies retained through time in premessenger RNA splicing machines.

Natural circularly permuted group II introns in bacteria produce RNA circles

Group II self-splicing introns are large structured RNAs that remove themselves from transcripts while simultaneously sealing the resulting gaps. Some representatives can subsequently reverse splice into DNA, accounting for their pervasive distribution in bacteria. The catalytically active tertiary structure of each group II intron is assembled from six domains that are arranged in a conserved order. Here, we report structural isomers of group II introns, called CP group II ribozymes, wherein the characteristic order of domains has been altered. Domains five and six, which normally reside at the 3' end of group II introns, instead occupy the 5' end to form circularly permuted variants. These unusual group II intron derivatives are catalytically active and generate large linear branched and small circular RNAs, reaction products that are markedly different from those generated by canonical group II introns. The biological role of CP group II ribozymes is currently unknown.

Relevance of the branch point adenosine, coordination loop, and 3' exon binding site for in vivo excision of the Sinorhizobium meliloti group II intron RmInt1

Excision of the bacterial group II intron RmInt1 has been demonstrated in vivo, resulting in the formation of both intron lariat and putative intron RNA circles. We show here that the bulged adenosine in domain VI of RmInt1 is required for splicing via the branching pathway, but branch site mutants produce small numbers of RNA molecules in which the first G residue of the intron is linked to the last C residue. Mutations in the coordination loop in domain I reduced splicing efficiency, but branched templates clearly predominated among splicing products. We also found that a single substitution at the EBS3 position (G329C), preventing EBS3-IBS3 pairing, resulted in the production of 50 to 100 times more RNA molecules in which the 5' and 3' extremities were joined. We provide evidence that these intron molecules may correspond to both, intron circles linked by a 2'-5' phosphodiester bond, and tandem, head-to-tail intron copies.

Solution structure of domain 6 from a self-splicing group II intron ribozyme: a Mg(2+) binding site is located close to the stacked branch adenosine

Group II intron self-splicing is essential for the correct expression of organellar genes in plants, fungi, and yeast, as well as of bacterial genes. Self-excision of these autocatalytic introns from the primary RNA transcript is achieved in a two-step mechanism that is apparently analogous to that of the eukaryotic spliceosome. The 2'-OH of a conserved adenosine (the branch point) located within domain 6 (D6) acts as the nucleophile in the first step of splicing. Despite the biological importance of group II introns, little is known about their structural organization and usage of metal ions in catalysis. Here we report the first solution structure of a catalytically active D6 construct encompassing the branch point and the neighboring helical regions from the mitochondrial yeast intron ai5gamma. The branch adenosine is the single unpaired nucleotide, and, in contrast to the spliceosomal branch site, resides within the helix, being partially stacked between two flanking GU wobble pairs. We identified a novel prominent Mg(2+) binding site in the major groove of the branch site. Importantly, Mg(2+) addition does not impair the stacking of the branch adenosine, rather it strengthens the interaction with the flanking uridines, as shown by NMR and fluorescence studies. This means that domain 6 presents the branch adenosine in a stacked fashion to the core of group II introns upon folding to the active conformation.

Group II introns: structure, folding and splicing mechanism

Group II introns are large autocatalytic RNAs found in organellar genomes of plants and lower eukaryotes, as well as in some bacterial genomes. Interestingly, these ribozymes share characteristic traits with both spliceosomal introns and non-LTR retrotransposons and may have a common evolutionary ancestor. Furthermore, group II intron features such as structure, folding and catalytic mechanism differ considerably from those of other large ribozymes, making group II introns an attractive model system to gain novel insights into RNA biology and biochemistry. This review explores recent advances in the structural and mechanistic characterization of group II intron architecture and self-splicing.

A new RNA branching activity: the GIR1 ribozyme

The formation of lariat intermediates during the first step of splicing of group II introns and spliceosomal introns is a well-studied fundamental reaction in molecular biology. Apart from this prominent example, there are surprisingly few occurrences of branched nucleotides or even 2',5'-phosphodiester bonds in biology. We recently described a new ribozyme, the GIR1 branching ribozyme, which catalyzes the formation of a tiny lariat that caps an mRNA. This new example together with work on artificial branching ribozymes and deoxyribozymes shows that branching is facile and points to the possibility that branching reactions could be more prevalent than previously recognized.

The receptor for branch-site docking within a group II intron active site

The distinguishing feature of group II introns, and the property that links them with spliceosomal catalysis, is their ability to undergo splicing through branching. In this reaction, the 2'-hydroxyl group of a specific adenosine within intron domain 6 serves as the nucleophile for attack on the 5' splice site. We know less about branching than any other feature of group II intron catalysis, largely because the receptor structure for activating the branch site is unknown. Here, we identify the intronic region that binds the branch site of a group IIB intron. Located in domain 1, close to receptors for intron domain 5 and both splice sites, we demonstrate that the branch-site receptor is a functional element required for transesterification. Furthermore, we show that crosslinked branch sites can carry out both steps of splicing, suggesting that the conformational state of the intron core is set early and that it persists throughout the entire splicing process.

Adenosine is inherently favored as the branch-site RNA nucleotide in a structural context that resembles natural RNA splicing

We previously used in vitro selection to identify the 7S11 deoxyribozyme, which catalyzes formation of 2',5'-branched RNA using a branch-site adenosine nucleophile and a 5'-triphosphate electrophile. An unanswered question is whether the use of branch-site adenosine is inherently preferred or a chance event during the particular selection experiment. Here we have found that deoxyribozymes newly selected to use uridine as the branch-site RNA nucleotide in a structural context that resembles natural RNA splicing instead prefer a branch-site adenosine, although adenosine was never available during the selection itself. Our results support a chemical basis for nature's choice of the branch-site nucleotide, which is almost always adenosine in group II introns and the spliceosome.

A conjugation-based system for genetic analysis of group II intron splicing in Lactococcus lactis

The conjugative element pRS01 from Lactococcus lactis encodes the putative relaxase protein LtrB. The ltrB gene is interrupted by the functional group II intron Ll.ltrB. Accurate splicing of the two ltrB exons is required for synthesis of the mRNA encoding the LtrB conjugative relaxase and subsequent plasmid transfer. A conjugation-based genetic assay was developed to identify Ll.ltrB mutations that affect splicing. In this assay a nonsplicing, transfer-defective pRS01 derivative (pM1014) and a shuttle vector carrying the ltrB region, including the Ll.ltrB intron (pCOM9), are used. pCOM9 provides splicing-dependent complementation of the transfer defect of pM1014. Site-directed mutations within Ll.ltrB, either in the catalytic RNA or in the intron-encoded protein gene ltrA, were generated in the context of pCOM9. When these mutants were tested in the conjugation-based assay, significantly reduced mating was observed. Quantitative molecular analysis of in vivo splicing activity confirmed that the observed mating defects resulted from reduced splicing. Once the system was validated for the engineered mutants, random mutagenesis of the intron followed by genetic and molecular screening for splicing defects resulted in identification of point mutations that affect splicing.

Optimization and generality of a small deoxyribozyme that ligates RNA

In vitro evolution was previously used to identify a small deoxyribozyme, 7Q10, that ligates RNA with formation of a 2'-5' phosphodiester linkage from a 2',3'-cyclic phosphate and a 5'-hydroxyl group. Ligation occurs in a convenient "binding arms" format analogous to that of the well-known 10-23 and 8-17 RNA-cleaving deoxyribozymes. Here, we report the optimization and generality of 7Q10 as a 2'-5' RNA ligase. By comprehensive mutagenesis of its 16-nucleotide enzyme region, the parent 7Q10 sequence is shown to be optimal for RNA ligation yield, although several mutations are capable of increasing the ligation rate approximately fivefold at the expense of yield. The 7Q10 deoxyribozyme ligates any RNA substrates that form the sequence motif UA GR (arrowhead=ligation site and R=purine), providing at least 30% yield of ligated RNA in approximately 1-2 hours at 37 degrees C and pH 9.0. Comparable yields are obtained in approximately 12-24 hours at pH 7.5, which may be more suitable for larger RNAs that are more sensitive to non-specific degradation. For RNA substrates that form the related ligation junction UA GY (Y=pyrimidine), somewhat lower yields are obtained, but significant ligation activity is still observed. These data establish that 7Q10 is a generally applicable RNA ligase. A plot of log(k(obs)) versus pH from pH 6.9 to 9.0 has a slope of just under 1, suggesting that a single deprotonation occurs during the rate-determining reaction step. The compact 7Q10 deoxyribozyme has both practical utility and the potential for increasing our structural and mechanistic understanding of how nucleic acids can mediate chemical reactions.

Lariat formation and a hydrolytic pathway in plant chloroplast group II intron splicing

Lariat formation has been studied intensively only with a few self-splicing group II introns, and little is known about how the numerous diverse introns in plant organelles are excised. Several of these introns have branch-points that are not a single bulge but are adjoined by A:A, A:C, A:G and G:G pairs. Using a highly sensitive in vivo approach, we demonstrate that all but one of the barley chloroplast introns splice via the common pathway that produces a branched product. RNA editing does not improve domain 5 and 6 structures of these introns. The conserved branch-point in tobacco rpl16 is chosen even if an adjacent unpaired adenosine is available, suggesting that spatial arrangements in domain 6 determine correct branch-point selection. Lariats were not detected for the chloroplast trnV intron, which lacks an unpaired adenosine in domain 6. Instead, this intron is released as linear molecules that undergo further polyadenylation. trnV, which is conserved throughout plant evolution, constitutes the first example of naturally occurring hydrolytic group II intron splicing in vivo.

Control of branch-site choice by a group II intron

The branch site of group II introns is typically a bulged adenosine near the 3'-end of intron domain 6. The branch site is chosen with extraordinarily high fidelity, even when the adenosine is mutated to other bases or if the typically bulged adenosine is paired. Given these facts, it has been difficult to discern the mechanism by which the proper branch site is chosen. In order to dissect the determinants for branch-point recognition, new mutations were introduced in the vicinity of the branch site and surrounding domains. Single mutations did not alter the high fidelity for proper branch-site selection. However, several combinations of mutations moved the branch site systematically to new positions along the domain 6 stem. Analysis of those mutants, together with a new alignment of domain 5 and domain 6 sequences, reveals a set of structural determinants that appear to govern branch-site selection by group II introns.

Transfer RNA recognition by aminoacyl-tRNA synthetases

The aminoacyl-tRNA synthetases are an ancient group of enzymes that catalyze the covalent attachment of an amino acid to its cognate transfer RNA. The question of specificity, that is, how each synthetase selects the correct individual or isoacceptor set of tRNAs for each amino acid, has been referred to as the second genetic code. A wealth of structural, biochemical, and genetic data on this subject has accumulated over the past 40 years. Although there are now crystal structures of sixteen of the twenty synthetases from various species, there are only a few high resolution structures of synthetases complexed with cognate tRNAs. Here we review briefly the structural information available for synthetases, and focus on the structural features of tRNA that may be used for recognition. Finally, we explore in detail the insights into specific recognition gained from classical and atomic group mutagenesis experiments performed with tRNAs, tRNA fragments, and small RNAs mimicking portions of tRNAs.

Defining functional groups, core structural features and inter-domain tertiary contacts essential for group II intron self-splicing: a NAIM analysis

Group II introns are self-splicing RNA molecules that are of considerable interest as ribozymes, mobile genetic elements and examples of folded RNA. Although these introns are among the most common ribozymes, little is known about the chemical and structural determinants for their reactivity. By using nucleotide analog interference mapping (NAIM), it has been possible to identify the nucleotide functional groups (Rp phosphoryls, 2'-hydroxyls, guanosine exocyclic amines, adenosine N7 and N6) that are most important for composing the catalytic core of the intron. The majority of interference effects occur in clusters located within the two catalytically essential Domains 1 and 5 (D1 and D5). Collectively, the NAIM results indicate that key tetraloop-receptor interactions display a specific chemical signature, that the epsilon-epsilon' interaction includes an elaborate array of additional features and that one of the most important core structures is an uncharacterized three-way junction in D1. By combining NAIM with site-directed mutagenesis, a new tertiary interaction, kappa-kappa', was identified between this region and the most catalytically important section of D5, adjacent to the AGC triad in stem 1. Together with the known zeta-zeta' interaction, kappa-kappa' anchors D5 firmly into the D1 scaffold, thereby presenting chemically essential D5 functionalities for participation in catalysis.

Modified oligonucleotides: synthesis and strategy for users

Synthetic oligonucleotide analogs have greatly aided our understanding of several biochemical processes. Efficient solid-phase and enzyme-assisted synthetic methods and the availability of modified base analogs have added to the utility of such oligonucleotides. In this review, we discuss the applications of synthetic oligonucleotides that contain backbone, base, and sugar modifications to investigate the mechanism and stereochemical aspects of biochemical reactions. We also discuss interference mapping of nucleic acid-protein interactions; spectroscopic analysis of biochemical reactions and nucleic acid structures; and nucleic acid cross-linking studies. The automation of oligonucleotide synthesis, the development of versatile phosphoramidite reagents, and efficient scale-up have expanded the application of modified oligonucleotides to diverse areas of fundamental and applied biological research. Numerous reports have covered oligonucleotides for which modifications have been made of the phosphodiester backbone, of the purine and pyrimidine heterocyclic bases, and of the sugar moiety; these modifications serve as structural and mechanistic probes. In this chapter, we review the range, scope, and practical utility of such chemically modified oligonucleotides. Because of space limitations, we discuss only those oligonucleotides that contain phosphate and phosphate analogs as internucleotidic linkages.

Moieties in an RNA promoter specifically recognized by a viral RNA-dependent RNA polymerase

RNAs 33 nucleotides in length can direct accurate initiation of subgenomic RNA synthesis by the brome mosaic virus RNA-dependent RNA polymerase (RdRp), provided that the native sequences are maintained at five positions: -17, -14, -13, -11, and the +1 initiation site. The functional groups in the bases of these essential nucleotides required to interact with RdRp were examined by using chemically synthesized RNAs containing base analogs at each of the five positions. Analysis using a template competition assay revealed that the mode of recognition for the initiation nucleotide (+1) is distinct from that of the other essential nucleotides in the promoter. Competition experiments also determined that three template nucleotides are sufficient for stable interaction with RdRp. These results identify base moieties in the brome mosaic virus subgenomic promoter required for efficient RNA synthesis and support the hypothesis that the recognition of a RNA promoter by a viral RdRp is analogous to the recognition of DNA promoters by DNA-dependent RNA polymerases.

The architectural organization and mechanistic function of group II intron structural elements

Group II introns are large, self-splicing RNAs and mobile genetic elements that provide good model systems for studies of RNA folding. The structures and mechanistic functions of individual domains are being elucidated, and long-range tertiary interactions between the domains are being identified, thus helping to define the three-dimensional architecture of the intron.

Group II intron splicing in vivo by first-step hydrolysis

Group I, group II and spliceosomal introns splice by two sequential transesterification reactions. For both spliceosomal and group II introns, the first-step reaction occurs by nucleophilic attack on the 5' splice junction by the 2' hydroxyl of an internal adenosine, forming a 2'-5' phosphodiester branch in the intron. The second reaction joins the two exons with a 3'-5' phosphodiester bond and releases intron lariat. In vitro, group II introns can self-splice by an efficient alternative pathway in which the first-step reaction occurs by hydrolysis. The resulting linear splicing intermediate participates in normal second-step reactions, forming spliced exon and linear intron RNAs. Here we show that the group II intron first-step hydrolysis reaction occurs in vivo in place of transesterification in the mitochondria of yeast strains containing branch-site mutations. As expected, the mutations block branching, but surprisingly still allow accurate splicing. This hydrolysis pathway may have been a step in the evolution of splicing mechanisms.

Ribozyme catalysis from the major groove of group II intron domain 5

The most highly conserved nucleotides in D5, an essential active site component of group II introns, consist of an AGC triad, of which the G is invariant. To understand how this G participates in catalysis, the mechanistic contribution of its functional groups was examined. We observed that the exocyclic amine of G participates in ground state interactions that stabilize D5 binding from the minor groove. In contrast, each major groove heteroatom of the critical G (specifically N7 or O6) is essential for chemistry. Thus, major groove atoms in an RNA helix can participate in catalysis, despite their presumed inaccessibility. N7 or O6 of the critical G could engage in critical tertiary interactions with the rest of the intron or they could, together with phosphate oxygens, serve as a binding site for catalytic metal ions.