Reactions of the eco RV restriction endonuclease with fluorescent oligodeoxynucleotides: identical equilibrium constants for binding to specific and non-specific DNA

Kinetic Analysis of the Interaction of Nicking Endonuclease BspD6I with DNA

Nicking endonucleases (NEs) are enzymes that incise only one strand of the duplex to produce a DNA molecule that is 'nicked' rather than cleaved in two. Since these precision tools are used in genetic engineering and genome editing, information about their mechanism of action at all stages of DNA recognition and phosphodiester bond hydrolysis is essential. For the first time, fast kinetics of the Nt.BspD6I interaction with DNA were studied by the stopped-flow technique, and changes of optical characteristics were registered for the enzyme or DNA molecules. The role of divalent metal cations was estimated at all steps of Nt.BspD6I-DNA complex formation. It was demonstrated that divalent metal ions are not required for the formation of a non-specific complex of the protein with DNA. Nt.BspD6I bound five-fold more efficiently to its recognition site in DNA than to a random DNA. DNA bending was confirmed during the specific binding of Nt.BspD6I to a substrate. The optimal size of Nt.BspD6I's binding site in DNA as determined in this work should be taken into account in methods of detection of nucleic acid sequences and/or even various base modifications by means of NEs.

Facilitated diffusion in the presence of obstacles on the DNA

Biological functions of DNA depend on the sequence-specific binding of DNA-binding proteins to their corresponding binding sites. Binding of these proteins to their binding sites occurs through a facilitated diffusion process that combines three-dimensional diffusion in the cytoplasm with one-dimensional diffusion (sliding) along the DNA. In this work, we use a lattice model of facilitated diffusion to study how the dynamics of binding of a protein to a specific site (e.g., binding of an RNA polymerase to a promoter or of a transcription factor to its operator site) is affected by the presence of other proteins bound to the DNA, which act as 'obstacles' in the sliding process. Different types of these obstacles with different dynamics are implemented. While all types impair facilitated diffusion, the extent of the hindrance depends on the type of obstacle. As a consequence of hindrance by obstacles, more excursions into the cytoplasm are required for optimal target binding compared to the case without obstacles.

Metal Ion Binding at the Catalytic Site Induces Widely Distributed Changes in a Sequence Specific Protein-DNA Complex

Metal ion cofactors can alter the energetics and specificity of sequence specific protein–DNA interactions, but it is unknown if the underlying effects on structure and dynamics are local or dispersed throughout the protein–DNA complex. This work uses EcoRV endonuclease as a model, and catalytically inactive lanthanide ions, which replace the Mg²⁺ cofactor. Nuclear magnetic resonance (NMR) titrations indicate that four Lu³⁺ or two La³⁺ cations bind, and two new crystal structures confirm that Lu³⁺ binding is confined to the active sites. NMR spectra show that the metal-free EcoRV complex with cognate (GATATC) DNA is structurally distinct from the nonspecific complex, and that metal ion binding sites are not assembled in the nonspecific complex. NMR chemical shift perturbations were determined for ¹H–¹⁵N amide resonances, for ¹H–¹³C Ile-δ-CH₃ resonances, and for stereospecifically assigned Leu-δ-CH₃ and Val-γ-CH₃ resonances. Many chemical shifts throughout the cognate complex are unperturbed, so metal binding does not induce major conformational changes. However, some large perturbations of amide and side chain methyl resonances occur as far as 34 Å from the metal ions. Concerted changes in specific residues imply that local effects of metal binding are propagated via a β-sheet and an α-helix. Both amide and methyl resonance perturbations indicate changes in the interface between subunits of the EcoRV homodimer. Bound metal ions also affect amide hydrogen exchange rates for distant residues, including a distant subdomain that contacts DNA phosphates and promotes DNA bending, showing that metal ions in the active sites, which relieve electrostatic repulsion between protein and DNA, cause changes in slow dynamics throughout the complex.

Fluorescent DNA-based enzyme sensors

Fluorescent sensors that make use of DNA structures have become widely useful in monitoring enzymatic activities. Early studies focused primarily on enzymes that naturally use DNA or RNA as the substrate. However, recent advances in molecular design have enabled the development of nucleic acid sensors for a wider range of functions, including enzymes that do not normally bind DNA or RNA. Nucleic acid sensors present some potential advantages over classical small-molecule sensors, including water solubility and ease of synthesis. An overview of the multiple strategies under recent development is presented in this critical review, and expected future developments in microarrays, single molecule analysis, and in vivo sensing are discussed (160 references).

Solution parameters modulating DNA binding specificity of the restriction endonuclease EcoRV

The DNA binding stringency of restriction endonucleases is crucial for their proper function. The X-ray structures of the specific and non-cognate complexes of the restriction nuclease EcoRV are considerably different suggesting significant differences in the hydration and binding free energies. Nonetheless, the majority of studies performed at pH 7.5, optimal for enzymatic activity, have found a < 10-fold difference between EcoRV binding constants to the specific and nonspecific sequences in the absence of divalent ions. We used a recently developed self-cleavage assay to measure EcoRV-DNA competitive binding and to evaluate the influence of water activity, pH and salt concentration on the binding stringency of the enzyme in the absence of divalent ions. We find the enzyme can readily distinguish specific and nonspecific sequences. The relative specific-nonspecific binding constant increases strongly with increasing neutral solute concentration and with decreasing pH. The difference in number of associated waters between specific and nonspecific DNA-EcoRV complexes is consistent with the differences in the crystal structures. Despite the large pH dependence of the sequence specificity, the osmotic pressure dependence indicates little change in structure with pH. The large osmotic pressure dependence means that measurement of protein-DNA specificity in dilute solution cannot be directly applied to binding in the crowded environment of the cell. In addition to divalent ions, water activity and pH are key parameters that strongly modulate binding specificity of EcoRV.

Photochemical regulation of restriction endonuclease activity

Removal by the light: The photochemical regulation of restriction endonucleases, which are important enzymes in molecular biology, has been investigated. Photolabile protecting groups have been installed on DNA substrates and have been demonstrated to inhibit restriction endonuclease activity until removed by UV light irradiation. Interestingly, these groups do not appear to dramatically affect initial binding of the enzyme to the DNA substrate, but rather prevent recognition of the specific cleavage site.

Differences between Ca2+ and Mg2+ in DNA binding and release by the SfiI restriction endonuclease: implications for DNA looping

Many enzymes acting on DNA require Mg(2+) ions not only for catalysis but also to bind DNA. Binding studies often employ Ca(2+) as a substitute for Mg(2+), to promote DNA binding whilst disallowing catalysis. The SfiI endonuclease requires divalent metal ions to bind DNA but, in contrast to many systems where Ca(2+) mimics Mg(2+), Ca(2+) causes SfiI to bind DNA almost irreversibly. Equilibrium binding by wild-type SfiI cannot be conducted with Mg(2+) present as the DNA is cleaved so, to study the effect of Mg(2+) on DNA binding, two catalytically-inactive mutants were constructed. The mutants bound DNA in the presence of either Ca(2+) or Mg(2+) but, unlike wild-type SfiI with Ca(2+), the binding was reversible. With both mutants, dissociation was slow with Ca(2+) but was in one case much faster with Mg(2+). Hence, Ca(2+) can affect DNA binding differently from Mg(2+). Moreover, SfiI is an archetypal system for DNA looping; on DNA with two recognition sites, it binds to both sites and loops out the intervening DNA. While the dynamics of looping cannot be measured with wild-type SfiI and Ca(2+), it becomes accessible with the mutant and Mg(2+).

How DNA coiling enhances target localization by proteins

Many genetic processes depend on proteins interacting with specific sequences on DNA. Despite the large excess of nonspecific DNA in the cell, proteins can locate their targets rapidly. After initial nonspecific binding, they are believed to find the target site by 1D diffusion ("sliding") interspersed by 3D dissociation/reassociation, a process usually referred to as facilitated diffusion. The 3D events combine short intrasegmental "hops" along the DNA contour, intersegmental "jumps" between nearby DNA segments, and longer volume "excursions." The impact of DNA conformation on the search pathway is, however, still unknown. Here, we show direct evidence that DNA coiling influences the specific association rate of EcoRV restriction enzymes. Using optical tweezers together with a fast buffer exchange system, we obtained association times of EcoRV on single DNA molecules as a function of DNA extension, separating intersegmental jumping from other search pathways. Depending on salt concentration, targeting rates almost double when the DNA conformation is changed from fully extended to a coiled configuration. Quantitative analysis by an extended facilitated diffusion model reveals that only a fraction of enzymes are ready to bind to DNA. Generalizing our results to the crowded environment of the cell we predict a major impact of intersegmental jumps on target localization speed on DNA.

Uracil DNA glycosylase uses DNA hopping and short-range sliding to trap extrahelical uracils

The astonishingly efficient location and excision of damaged DNA bases by DNA repair glycosylases is an especially intriguing problem in biology. One example is the enzyme uracil DNA glycosylase (UNG), which captures and excises rare extrahelical uracil bases that have emerged from the DNA base stack by spontaneous base pair breathing motions. Here, we explore the efficiency and mechanism by which UNG executes intramolecular transfer and excision of two uracil sites embedded on the same or opposite DNA strands at increasing site spacings. The efficiency of intramolecular site transfer decreased from 41 to 0% as the base pair spacing between uracil sites on the same DNA strand increased from 20 to 800 bp. The mechanism of transfer is dominated by DNA hopping between landing sites of approximately 10 bp size, over which rapid 1D scanning likely occurs. Consistent with DNA hopping, site transfer at 20- and 56-bp spacings was unaffected by whether the uracils were placed on the same or opposite strands. Thus, UNG uses hopping and 3D diffusion through bulk solution as the principal pathways for efficient patrolling of long genomic DNA sequences for damage. Short-range sliding over the range of a helical turn allows for redundant inspection of very local DNA sequences and trapping of spontaneously emerging extrahelical uracils.

Kinetic analyses of divalent cation-dependent EcoRV digestions on a DNA-immobilized quartz crystal microbalance

Enzymatic digestion with a type IIP restriction endonuclease EcoRV was investigated on a DNA-immobilized 27-MHz quartz crystal microbalance (QCM). Real-time observations of both the enzyme binding process and the DNA cleavage process of EcoRV were followed by frequency (mass) changes on the QCM, which were dependent on divalent cations such as Ca(2+) or Mg(2+). In the presence of Ca(2+), the site-specific binding of EcoRV to DNA could be observed, without the catalytic process. On the other hand, in the presence of Mg(2+), both the binding of the enzyme to the specific DNA (mass increase) and the site-specific cleavage reaction (mass decrease) could be observed continuously from QCM frequency changes. From time courses of frequency (mass) changes, each kinetic parameter, namely binding rate constants (k(on)), dissociation rate constants (k(off)), dissociation constants (K(d)) of EcoRV to DNA, and catalytic rate constant (k(cat)) of the cleavage reaction, could be determined. The binding kinetic parameters of EcoRV in the presence of Ca(2+) were consistent with those of the binding process followed by the cleavage process in the presence of Mg(2+). The k(cat) value obtained by the QCM method was also consistent with that obtained by other methods. This study is the first to simultaneously determine k(on), k(off), and k(cat) for a type IIP restriction endonuclease on one device.

Real-time observation of DNA looping dynamics of Type IIE restriction enzymes NaeI and NarI

Many restriction enzymes require binding of two copies of a recognition sequence for DNA cleavage, thereby introducing a loop in the DNA. We investigated looping dynamics of Type IIE restriction enzymes NaeI and NarI by tracking the Brownian motion of single tethered DNA molecules. DNA containing two endonuclease recognition sites spaced a few 100 bp apart connect small polystyrene beads to a glass surface. The position of a bead is tracked through video microscopy. Protein-mediated looping and unlooping is then observed as a sudden specific change in Brownian motion of the bead. With this method we are able to directly follow DNA looping kinetics of single protein–DNA complexes to obtain loop stability and loop formation times. We show that, in the absence of divalent cations, NaeI induces DNA loops of specific size. In contrast, under these conditions NarI mainly creates non-specific loops, resulting in effective DNA compaction for higher enzyme concentrations. Addition of Ca²⁺ increases the NaeI-DNA loop lifetime by two orders of magnitude and stimulates specific binding by NarI. Finally, for both enzymes we observe exponentially distributed loop formation times, indicating that looping is dominated by (re)binding the second recognition site.

Trapping DNA-protein binding reactions with neutral osmolytes for the analysis by gel mobility shift and self-cleavage assays

We take advantage of our previous observation that neutral osmolytes can strongly slow down the rate of DNA–protein complex dissociation to develop a method that uses osmotic stress to ‘freeze’ mixtures of DNA–protein complexes and prevent further reaction enabling analysis of the products. We apply this approach to the gel mobility shift assay and use it to modify a self-cleavage assay that uses the nuclease activity of the restriction endonucleases to measure sensitively their specific binding to DNA. At sufficiently high concentrations of neutral osmolytes the cleavage reaction can be triggered at only those DNA fragments with initially bound enzyme. The self-cleavage assay allows measurement of binding equilibrium and kinetics directly in solution avoiding the intrinsic problems of gel mobility shift and filter binding assays while providing the same sensitivity level. Here we compare the self-cleavage and gel mobility shift assays applied to the DNA binding of EcoRI and BamHI restriction endonucleases. Initial results indicate that BamHI dissociation from its specific DNA sequence is strongly linked to water activity with the half-life time of the specific complex increasing ∼20-fold from 0 to 1 osmolal betaine.

DNA-tension dependence of restriction enzyme activity reveals mechanochemical properties of the reaction pathway

Type II restriction endonucleases protect bacteria against phage infections by cleaving recognition sites on foreign double-stranded DNA (dsDNA) with extraordinary specificity. This capability arises primarily from large conformational changes in enzyme and/or DNA upon target sequence recognition. In order to elucidate the connection between the mechanics and the chemistry of DNA recognition and cleavage, we used a single-molecule approach to measure rate changes in the reaction pathway of EcoRV and BamHI as a function of DNA tension. We show that the induced-fit rate of EcoRV is strongly reduced by such tension. In contrast, BamHI is found to be insensitive, providing evidence that both substrate binding and hydrolysis are not influenced by this force. Based on these results, we propose a mechanochemical model of induced-fit reactions on DNA, allowing determination of induced-fit rates and DNA bend angles. Finally, for both enzymes a strongly decreased association rate is obtained on stretched DNA, presumably due to the absence of intradomain dissociation/re-association between non-specific sites (jumping). The obtained results should apply to many other DNA-associated proteins.

Mechanistic insights from the structures of HincII bound to cognate DNA cleaved from addition of Mg2+ and Mn2+

The three-dimensional X-ray crystal structures of HincII bound to cognate DNA containing GTCGAC and Mn(2+) or Mg(2+), at 2.50A and 2.95A resolution, respectively, are presented. In both structures, the DNA is found cleaved, and the positions of the active-site groups, cleaved phosphate group, and 3' oxygen atom of the leaving group are in very similar positions. Two highly occupied Mn(2+) positions are found in each active site of the four crystallographically independent subunit copies in the HincII/DNA/Mn(2+) structure. The manganese ion closest to the previously identified single Ca(2+) position of HincII is shifted 1.7A and has lost direct ligation to the active-site aspartate residue, Asp127. A Mn(2+)-ligated water molecule in a position analogous to that seen in the HincII/DNA/Ca(2+) structure, and proposed to be the attacking nucleophile, is beyond hydrogen bonding distance from the active-site lysine residue, Lys129, but remains within hydrogen bonding distance from the proRp oxygen atom of the phosphate group 3' to the scissile phosphate group. In addition, the position of the cleaved phosphate group is on the opposite side of the axis connecting the two metal ions relative to that found in the BamHI/product DNA/Mn(2+) structure. Mechanistic implications are discussed, and a model for the two-metal-ion mechanism of DNA cleavage by HincII is proposed.

How do site-specific DNA-binding proteins find their targets?

Essentially all the biological functions of DNA depend on site-specific DNA-binding proteins finding their targets, and therefore 'searching' through megabases of non-target DNA. In this article, we review current understanding of how this sequence searching is done. We review how simple diffusion through solution may be unable to account for the rapid rates of association observed in experiments on some model systems, primarily the Lac repressor. We then present a simplified version of the 'facilitated diffusion' model of Berg, Winter and von Hippel, showing how non-specific DNA-protein interactions may account for accelerated targeting, by permitting the protein to sample many binding sites per DNA encounter. We discuss the 1-dimensional 'sliding' motion of protein along non-specific DNA, often proposed to be the mechanism of this multiple site sampling, and we discuss the role of short-range diffusive 'hopping' motions. We then derive the optimal range of sliding for a few physical situations, including simple models of chromosomes in vivo, showing that a sliding range of approximately 100 bp before dissociation optimizes targeting in vivo. Going beyond first-order binding kinetics, we discuss how processivity, the interaction of a protein with two or more targets on the same DNA, can reveal the extent of sliding and we review recent experiments studying processivity using the restriction enzyme EcoRV. Finally, we discuss how single molecule techniques might be used to study the dynamics of DNA site-specific targeting of proteins.

Simultaneous DNA Binding and Bending by EcoRV Endonuclease Observed by Real-Time Fluorescence†

The complete catalytic cycle of EcoRV endonuclease has been observed by combining fluorescence anisotropy with fluorescence resonance energy transfer (FRET) measurements. Binding, bending, and cleavage of substrate oligonucleotides were monitored in real time by rhodamine-x anisotropy and by FRET between rhodamine and fluorescein dyes attached to opposite ends of a 14-mer DNA duplex. For the cognate GATATC site binding and bending are found to be nearly simultaneous, with association and bending rate constants of (1.45-1.6) x 10(8) M(-1) s(-1). On the basis of the measurement of k(off) by a substrate-trapping approach, the equilibrium dissociation constant of the enzyme-DNA complex in the presence of inhibitory calcium ions was calculated as 3.7 x 10(-12) M from the kinetic constants. Further, the entire DNA cleavage reaction can be observed in the presence of catalytic Mg(2+) ions. These measurements reveal that the binding and bending steps occur at equivalent rates in the presence of either Mg(2+) or Ca(2+), while a slow decrease in fluorescence intensity following bending corresponds to k(cat), which is limited by the cleavage and product dissociation steps. Measurement of k(on) and k(off) in the absence of divalent metals shows that the DNA binding affinity is decreased by 5000-fold to 1.4 x 10(-8) M, and no bending could be detected in this case. Together with crystallographic studies, these data suggest a model for the induced-fit conformational change in which the role of divalent metal ions is to stabilize the sharply bent DNA in an orientation suitable for accessing the catalytic transition state.

DNA recognition by the EcoRV restriction endonuclease probed using base analogues

The EcoRV restriction endonuclease recognises palindromic GATATC sequences and cuts between the central T and dA bases in a reaction that has an absolute requirement for a divalent metal ion, physiologically Mg(2+). Use has been made of base analogues, which delete hydrogen bonds between the protein and DNA (or hydrophobic interactions in the case of the 5-CH(3) group of thymine), to evaluate the roles of the outer two base-pairs (GATATC) in DNA recognition. Selectivity arises at both the binding steps leading to the formation of the enzyme-DNA-metal ion ternary complex (assayed by measuring the dissociation constant in the presence of the non-reactive metal Ca(2+)) and the catalytic step (evaluated using single-turnover hydrolysis in the presence of Mg(2+)), with each protein-DNA contact contributing to recognition. With the A:T base-pair, binding was reduced by the amount expected for the simple loss of a single contact; much more severe effects were observed with the G:C base-pair, suggesting additional conformational perturbation. Most of the modified bases lowered the rate of hydrolysis; furthermore, the presence of an analogue in one strand of the duplex diminished cutting at the second, unmodified strand, indicative of communication between DNA binding and the active site. The essential metal ion Mg(2+) plays a key role in mediating interactions between the DNA binding site and active centre and in many instances rescue of hydrolysis was seen with Mn(2+). It is suggested that contacts between the GATATC site are required for tight binding and for the correct assembly of metal ions and bound water at the catalytic site, functions important in providing acid/base catalysis and transition state stabilisation.

Subunit assembly for DNA cleavage by restriction endonuclease SgrAI

The SgrAI endonuclease usually cleaves DNA with two recognition sites more rapidly than DNA with one site, often converting the former directly to the products cut at both sites. In this respect, SgrAI acts like the tetrameric restriction enzymes that bind two copies of their target sites before cleaving both sites concertedly. However, by analytical ultracentrifugation, SgrAI is a dimer in solution though it aggregates to high molecular mass species when bound to its specific DNA sequence. Its reaction kinetics indicate that it uses different mechanisms to cleave DNA with one and with two SgrAI sites. It cleaves the one-site DNA in the style of a dimeric restriction enzyme acting at an individual site, mediating neither interactions in trans, as seen with the tetrameric enzymes, nor subunit associations, as seen with the monomeric enzymes. In contrast, its optimal reaction on DNA with two sites involves an association of protein subunits: two dimers bound to sites in cis may associate to form a tetramer that has enhanced activity, which then cleaves both sites concurrently. The mode of action of SgrAI differs from all restriction enzymes characterised previously, so this study extends the range of mechanisms known for restriction endonucleases.

Type II restriction endonucleases

Type II restriction endonucleases have emerged as important paradigms for the study of protein-nucleic acid interactions. This is due to their ability to catalyse phosphodiester bond cleavage with very large rate enhancements while also maintaining exquisite sequence selectivities. The principles and methods developed to analyze site-specific binding and catalysis for restriction endonucleases can be applied to other enzymes which also operate on nucleic acids. This paper reviews biochemical and structural approaches to characterization of these enzymes, with particular attention to the multiple crucial roles of divalent metal ions, the possibilities for use of alternative substrates in binding and catalytic experiments, the strategies for exploring the detailed chemistry of phosphoryl transfer, and the use of X-ray crystallography to provide descriptions of conformational pathways at specific, nonspecific, and noncognate DNA sites.

Site-specific photo-cross-linking between lambda integrase and its DNA recombination target

The site-specific recombinase (Int) of bacteriophage lambda is a heterobivalent DNA-binding protein and is composed of three domains as follows: an amino-terminal domain that binds with high affinity to "arm-type" sequences within the recombination target DNA (att sites), a carboxyl-terminal domain that contains all of the catalytic functions, and a central domain that contributes significantly to DNA binding at the "core-type" sequences where DNA cleavage and ligation are executed. We constructed a family of core-type DNA oligonucleotides, each of which contained the photoreactive analog 4-thiodeoxythymidine (4-thioT) at a different position. When tested for their respective abilities to promote covalent cross-links with Int after irradiation with UV light at 366 nm, one oligonucleotide stood out dramatically. The 4-thioT substitution on the DNA strand opposite the site of Int cleavage led to photo-induced cross-linking efficiencies of approximately 20%. The efficiency and specificity of Int binding and cleavage at this 4-thioT-substituted core site was shown to be largely uncompromised, and its ability to participate in a full site-specific recombination reaction was reduced only slightly. Identification of the photo-cross-linked residue as Lys-141 in the central domain provides, along with other results, several insights about the nature of core-type DNA recognition by the bivalent recombinases of the lambda Int family.

Dissecting the metal ion dependence of DNA binding by PvuII endonuclease

Divalent cations can provide an effective means of modulating the behavior of nucleic acid binding proteins. As a result, there is strong interest in understanding the role of metal ions in the function of both nucleic acid binding proteins and their enzymes. We have applied complementary fluorescence spectroscopic and nitrocellulose filter binding assays to quantitate the role of metal ions in mediating DNA binding and sequence specificity by the representative PvuII endonuclease. At pH 7.5 in the presence of the catalytically nonsupportive Ca(II), this enzyme binds the PvuII target sequence with a K(d) of 50 pM. Under strict metal-free conditions, the enzyme exhibits a K(d) of only 300 nM for the cognate sequence, an affinity which is weak relative to those measured for other systems in the absence of metal ions. This represents a 6000-fold increase in PvuII affinity for cognate DNA upon the addition of Ca(II). The pH dependences of both metal ion-dependent and metal ion-independent DNA binding are remarkably shallow throughout the physiological range; other characterized restriction enzymes exhibit more pronounced pH dependences of DNA binding even in the absence of metal ions. Similar measurements with noncognate sequences indicate that divalent metal ions are not important to nonspecific DNA binding; K(d) values are approximately equal to 200 nM throughout the physiological pH range, a behavior shared with other endonucleases. While some of these results extend somewhat the range of expected behavior for restriction enzymes, these results indicate that PvuII endonuclease shares with other characterized systems a mechanism by which cognate affinity and sequence discrimination are most effectively achieved in the presence of divalent metal ions.

Structure and function of type II restriction endonucleases

More than 3000 type II restriction endonucleases have been discovered. They recognize short, usually palindromic, sequences of 4-8 bp and, in the presence of Mg(2+), cleave the DNA within or in close proximity to the recognition sequence. The orthodox type II enzymes are homodimers which recognize palindromic sites. Depending on particular features subtypes are classified. All structures of restriction enzymes show a common structural core comprising four beta-strands and one alpha-helix. Furthermore, two families of enzymes can be distinguished which are structurally very similar (EcoRI-like enzymes and EcoRV-like enzymes). Like other DNA binding proteins, restriction enzymes are capable of non-specific DNA binding, which is the prerequisite for efficient target site location by facilitated diffusion. Non-specific binding usually does not involve interactions with the bases but only with the DNA backbone. In contrast, specific binding is characterized by an intimate interplay between direct (interaction with the bases) and indirect (interaction with the backbone) readout. Typically approximately 15-20 hydrogen bonds are formed between a dimeric restriction enzyme and the bases of the recognition sequence, in addition to numerous van der Waals contacts to the bases and hydrogen bonds to the backbone, which may also be water mediated. The recognition process triggers large conformational changes of the enzyme and the DNA, which lead to the activation of the catalytic centers. In many restriction enzymes the catalytic centers, one in each subunit, are represented by the PD. D/EXK motif, in which the two carboxylates are responsible for Mg(2+) binding, the essential cofactor for the great majority of enzymes. The precise mechanism of cleavage has not yet been established for any enzyme, the main uncertainty concerns the number of Mg(2+) ions directly involved in cleavage. Cleavage in the two strands usually occurs in a concerted fashion and leads to inversion of configuration at the phosphorus. The products of the reaction are DNA fragments with a 3'-OH and a 5'-phosphate.

Multiple cleavage activities of endonuclease V from Thermotoga maritima: recognition and strand nicking mechanism

Endonuclease V is a deoxyinosine 3'-endonuclease which initiates removal of inosine from damaged DNA. A thermostable endonuclease V from the hyperthermophilic bacterium Thermotoga maritima has been cloned and expressed in Escherichia coli. The DNA recognition and reaction mechanisms were probed with both double-stranded and single-stranded oligonucleotide substrates which contained inosine, abasic site (AP site), uracil, or mismatches. Gel mobility shift and kinetic analyses indicate that the enzyme remains bound to the cleaved inosine product. This slow product release may be required in vivo to ensure an orderly process of repairing deaminated DNA. When the enzyme is in excess, the primary nicked products experience a second nicking event on the complementary strand, leading to a double-stranded break. Cleavage at AP sites suggests that the enzyme may use a combination of base contacts and local distortion for recognition. The weak binding to uracil sites may preclude the enzyme from playing a significant role in repair of such sites, which may be occupied by uracil-specific DNA glycosylases. Analysis of cleavage patterns of all 12 natural mismatched base pairs suggests that purine bases are preferrentially cleaved, showing a general hierarchy of A = G > T > C. A model accounting for the recognition and strand nicking mechanism of endonuclease V is presented.

SfiI endonuclease activity is strongly influenced by the non-specific sequence in the middle of its recognition site

The SfiI endonuclease cleaves DNA at the sequence GGCCNNNN NGGCC, where N is any base and downward arrow is the point of cleavage. Proteins that recognise discontinuous sequences in DNA can be affected by the unspecified sequence between the specified base pairs of the target site. To examine whether this applies to SFII, a series of DNA duplexes were made with identical sequences apart from discrete variations in the 5 bp spacer. The rates at which SFII cleaved each duplex were measured under steady-state conditions: the steady-state rates were determined by the DNA cleavage step in the reaction pathway. SFII cleaved some of these substrates at faster rates than other substrates. For example, the change in spacer sequence from AACAA to AAACA caused a 70-fold increase in reaction rate. In general, the extrapolated values for k(cat) and K(m) were both higher on substrates with inflexible spacers than those with flexible structures. The dinucleotide at the site of cleavage was largely immaterial. SFII activity is thus highly dependent on conformational variations in the spacer DNA.

The energetics of the interaction of BamHI endonuclease with its recognition site GGATCC

The interaction of BamHI endonuclease with DNA has been studied crystallographically, but has not been characterized rigorously in solution. The enzyme binds in solution as a homodimer to its recognition site GGATCC. Only six base-pairs are directly recognized, but binding affinity (in the absence of the catalytic cofactor Mg(2+)) increases 5400-fold as oligonucleotide length increases from 10 to 14 bp. Binding is modulated by sequence context outside the recognition site, varying about 30-fold from the bes t (GTG or TAT) to the worst (CGG) flanking triplets. BamHI, EcoRI and EcoRV endonucleases all have different context preferences, suggesting that context affects binding by influencing the free energy levels of the complexes rather than that of the free DNA. Ethylation interference footprinting in the absence of divalent metal shows a localized and symmetrical pattern of phosphate contacts, with strong contacts at NpNpNpGGApTCC. In the presence of Mg(2+), first-order cleavage rate constants are identical in the two GGA half-sites, are the same for the two nicked intermediates and are unaffected by substrate length in the range 10-24 bp. DNA binding is strongly enhanced by mutations D94N, E111A or E113K, by binding of Ca(2+) at the active site, or by deletion of the scissile phosphate GpGATCC, indicating that a cluster of negative charges at the catalytic site contributes at least 3-4 kcal/mol of unfavorable binding free energy. This electrostatic repulsion destabilizes the enzyme-DNA complex and favors metal ion binding and progression to the transition state for cleavage.

Binding and recognition of GATATC target sequences by the EcoRV restriction endonuclease: a study using fluorescent oligonucleotides and fluorescence polarization

Oligonucleotides labeled with hexachlorofluorescein (hex) have enabled the interaction of the restriction endonuclease EcoRV with DNA to be evaluated using fluorescence anisotropy. The sensitivity of hex allowed measurements at oligonucleotide concentrations as low as 1 nM, enabling K(D) values in the low nanomolar range to be measured. Both direct titration, i.e., addition of increasing amounts of the endonuclease to hex-labeled oligonucleotides, and displacement titration, i.e., addition of unlabeled oligonucleotide to preformed hex-oligonucleotide/EcoRV endonuclease complexes, have been used for K(D) determination. Displacement titration is the method of choice; artifacts due to any direct interaction of the enzyme with the dye are eliminated, and higher fluorescent-labeled oligonucleotide concentrations may be used, improving signal-to-noise ratio. Using this approach (with three different oligonucleotides) we found that the EcoRV restriction endonuclease showed a preference of between 1.5 and 6.5 for its GATATC target sequence at pH 7.5 and 100 mM NaCl, when the divalent cation Ca2+ is absent. As expected, both the presence of Ca2+ and a decrease in pH value stimulated the binding of specific sequences but had much less effect on nonspecific ones.

One- and three-dimensional pathways for proteins to reach specific DNA sites

Proteins that interact with specific DNA sites bind to DNA at random and then translocate to the target site. This may occur by one-dimensional diffusion along the DNA, or through three-dimensional space via multiple dissociation/re-associations. To distinguish these routes, reactions of the ECO:RV endonuclease were studied on substrates with two ECO:RV sites separated by varied distances. The fraction of encounters between the DNA and the protein that resulted in the processive cleavage of both sites decreased as the length of intervening DNA was increased, but not in the manner demanded for one-dimensional diffusion. The variation in processivity with inter-site spacing shows instead that protein moves from one site to another through three-dimensional space, by successive dissociation/re-associations, though each re-association to a new site is followed by a search of the DNA immediately adjacent to that site. Although DNA-binding proteins are usually thought to find their target sites by one-dimensional pathways, three-dimensional routes may be more common than previously anticipated.

Recognition of native DNA methylation by the PvuII restriction endonuclease

Recognizing the methylation status of specific DNA sequences is central to the function of many systems in eukaryotes and prokaryotes. Restriction-modification systems have to distinguish between 'self' and 'non-self' DNA and depend on the inability of restriction endonucleases to cleave their DNA substrates when the DNA is appropriately methylated. These endonucleases thus provide a model system for studying the recognition of DNA methylation by proteins. We have characterized the interaction of R.PVU:II with DNA containing the physiologically relevant N4-methylcytosine modification. R.PVU:II binds (N4m)C-modified DNA and cleaves it very slowly. Methylated strands in hemimethylated duplexes were cleaved at a higher rate than in fully methylated duplexes, in parallel with a higher binding affinity for hemimethylated DNA. The co-crystal structures of R.PVU:II-DNA, together with a mutagenesis study, have implicated specific amino acids in recognition of the methylatable base; one of these is His84. We report that replacing His84 with Ala reduced the rate of cleavage of unmodified DNA but, in contrast, slightly increased the cleavage of (N4m)C-modified DNA.

Alternative geometries of DNA looping: an analysis using the SfiI endonuclease

Many processes are governed by proteins that bind to separate sites in DNA and loop out the intervening DNA, but the geometries of the loops have seldom been determined. The SfiI endonuclease cleaves DNA after interacting with two recognition sites, and is a favourable system for the analysis of DNA looping. A gel-shift assay was used here to examine the binding of SfiI to a series of linear DNA molecules containing two SfiI sites separated by 109-170 base-pairs. The complexes in which SfiI trapped a loop by binding to two sites in the same DNA were separated from the complexes containing SfiI bound to separate DNA molecules. Step-wise changes in the inter-site spacing generated two forms of the looped complex with different electrophoretic mobilities. The yields of each looped complex and the complexes from intermolecular synapses all varied cyclically with the inter-site spacing, with similar periodicities ( approximately 10.5 base-pairs) but with different phases. One looped complex predominated whenever the DNA between the sites needed to be underwound in order to produce the correct helical orientation of the binding sites. The other looped complex predominated whenever the intervening DNA needed to be overwound. We conclude that the former has trapped a right-handed loop with a negative node and the latter a left-handed loop with a positive node.

Reactions of BglI and other type II restriction endonucleases with discontinuous recognition sites

Type II restriction enzymes generally recognize continuous sequences of 4-8 consecutive base pairs on DNA, but some recognize discontinuous sites where the specified sequence is interrupted by a defined length of nonspecific DNA. To date, a mechanism has been established for only one type II endonuclease with a discontinuous site, SfiI at GGCCNNNNNGGCC (where N is any base). In contrast to orthodox enzymes such as EcoRV, dimeric proteins that act at a single site, SfiI is a tetramer that interacts with two sites before cleaving DNA. BglI has a similar recognition sequence (GCCNNNNNGGC) to SfiI but a crystal structure like EcoRV. BglI and several other endonucleases with discontinuous sites were examined to see if they need two sites for their DNA cleavage reactions. The enzymes included some with sites containing lengthy segments of nonspecific DNA, such as XcmI (CCANNNNNNNNNTGG). In all cases, they acted at individual sites. Elongated recognition sites do not necessitate unusual reaction mechanisms. Other experiments on BglI showed that it bound to and cleaved DNA in the same manner as EcoRV, thus further delineating a distinct group of restriction enzymes with similar structures and a common reaction mechanism.

Osmotic pressure effects on EcoRV cleavage and binding

Investigations of DNA binding proteins frequently measure pH and salt dependence, but relatively few studies measure protein binding in high concentrations of small molecules often found in vivo. We have measured kinetics of the restriction enzyme EcoRV in concentrated solutions of three small cosolvents that produce osmotic pressures from 0.25 to 2.5 mol/kg (6 to 62 atm or water activity of 0.995 to 0.956). We have correlated DNA cleavage and binding parameters with four solution parameters (dielectric constant, viscosity, water concentration, and water activity). We found that the responses of maximum velocity (Vmax) and the dissociation constant for nonspecific binding (Kd,ns) best correlate with water activity. The Michaelis constant (Km) correlates with both water activity and solution viscosity, the latter due to the highly dilute reactant concentrations, which make enzyme-substrate combination diffusion limited. Dielectric constant does not influence any of the kinetic parameters, which is consistent with a view that protein and DNA are preferentially hydrated, and excluded solutes cannot affect the local dielectric constant.

Structural analysis of a mutational hot-spot in the EcoRV restriction endonuclease: a catalytic role for a main chain carbonyl group

Following random mutagenesis of the Eco RV endonuclease, a high proportion of the null mutants carry substitutions at Gln69. Such mutants display reduced rates for the DNA cleavage step in the reaction pathway, yet the crystal structures of wild-type Eco RV fail to explain why Gln69 is crucial for activity. In this study, crystal structures were determined for two mutants of Eco RV, with Leu or Glu at residue 69, bound to specific DNA. The structures of the mutants are similar to the native protein and no function can be ascribed to the side chain of the amino acid at this locus. Instead, the structures of the mutant proteins suggest that the catalytic defect is due to the positioning of the main chain carbonyl group. In the enzyme-substrate complex for Eco RV, the main chain carbonyl of Gln69 makes no interactions with catalytic functions but, in the enzyme-product complex, it coordinates a metal ion bound to the newly liberated 5'-phosphate. This re-positioning may be hindered in the mutant proteins. Molecular dynamics calculations indicate that the metal on the phosphoryl oxygen interacts with the carbonyl group upon forming the pentavalent intermediate during phosphodiester hydrolysis. A main chain carbonyl may thus play a role in catalysis by Eco RV.

Divalent metal dependence of site-specific DNA binding by EcoRV endonuclease

Measurements of binding equilibria of EcoRV endonuclease to DNA, for a series of base-analogue substrates, demonstrate that expression of sequence selectivity is strongly enhanced by the presence of Ca2+ ions. Binding constants were determined for short duplex oligodeoxynucleotides containing the cognate DNA site, three cleavable noncognate sites, and a fully nonspecific site. At pH 7.5 and 100 mM NaCl, the full range of specificity from the specific (tightest binding) to nonspecific (weakest binding) sites is 0.9 kcal/mol in the absence of metal ions and 5.8 kcal/mol in the presence of Ca2+. Precise determination of binding affinities in the presence of the active Mg2+ cofactor was found to be possible for substrates retaining up to 1.6% of wild-type activity, as determined by the rate of phosphoryl transfer. These measurements show that Ca2+ is a near-perfect analogue for Mg2+ in binding reactions of the wild-type enzyme with DNA base-analogue substrates, as it provides identical DeltaDeltaG degrees bind values among the cleavable noncognate sites. Equilibrium dissociation constants of wild-type and base-analogue sites were also measured for the weakly active EcoRV mutant K38A, in the presence of either Mg2+ or Ca2+. In this case, Ca2+ allows expression of a greater degree of specificity than does Mg2+. DeltaDeltaG degrees bind values of K38A toward specific versus nonspecific sites are 6.1 kcal/mol with Ca2+ and 3.9 kcal/mol with Mg2+, perhaps reflecting metal-specific conformational changes in the ground-state ternary complexes. The enhancement of binding specificity provided by divalent metal ions is likely to be general to many restriction endonucleases and other metal-dependent nucleic acid-modifying enzymes. These results strongly suggest that measurements of DNA binding affinities for EcoRV, and likely for many other restriction endonucleases, should be performed in the presence of divalent metal ions.

Binding kinetics and footprinting of TaqI endonuclease: effects of metal cofactors on sequence-specific interactions

Restriction endonucleases achieve sequence-specific recognition and strand cleavage through the interplay of base, phosphate backbone, and metal cofactor interactions. In this study, we investigate the binding kinetics of TaqI endonuclease using the wild-type enzyme and a binding proficient, catalysis deficient mutant TaqI-D137A both in the absence of a metal cofactor and in the presence of Mg2+ or Ca2+. As demonstrated by gel mobility shift analyses, TaqI endonuclease requires a metal cofactor for achieving high-affinity specific binding to its cognate sequence, TCGA. In the absence of a metal cofactor, the enzyme binds all DNA sequences (TaqI cognate site, star site, and nonspecific site) with essentially equal affinity, thereby exhibiting little discrimination. The dissociation constant of the cognate sequence in the presence of Mg2+ at 60 degrees C is 0. 26 nM, a value comparable to our previously reported Km of 0.5 nM measured under steady-state conditions. The TaqI-TCGA-Mg2+ complex is stable, with a half-life of 21 min at 60 degrees C. The boundary of the protein-DNA interface is approximated to be about 18 bp as determined by DNase I footprinting. Data from this study support the notion that a metal cofactor plays a critical role for achieving sequence-specific discrimination in a subset of nucleases, including TaqI, EcoRV, and others.

Specificity from the synapsis of DNA elements by the Sfi I endonuclease

The synapsis of DNA sites is a prerequisite for the reactions of many proteins that act at specific DNA sequences. The requirement for synapsis was investigated by analysing the reactions of Sfi I, a tetrameric restriction enzyme that cleaves DNA only after interacting with two recognition sites. In the presence of Mg2+, oligonucleotide duplexes with the cognate recognition sequence were cleaved rapidly, with cooperative kinetics, while non-cognate duplexes were not cleaved. In the absence of Mg2+, the primary complex formed by Sfi I with cognate DNA contained two duplexes synapsed by the tetramer: a secondary complex containing one duplex was seen only at elevated Sfi I concentrations. In contrast, the principal complex with non-cognate DNA contained one duplex bound to Sfi I. Pairs of non-cognate duplexes, or one cognate and one non-cognate duplex, generally failed to form synaptic complexes. On adding Mg2+to complexes with cognate DNA, cleavage occurred much more rapidly in the synaptic complex than in the secondary complex. DNA synapsis thus acts to enhance the specificity of Sfi I for its recognition sequence, by demanding two cognate sites for a catalytically active complex and by excluding non-cognate sites from the synaptic complex.

DNA cleavage by the EcoRV restriction endonuclease: pH dependence and proton transfers in catalysis

To characterise the pH dependence of phosphodiester hydrolysis by the EcoRV endonuclease in the presence of Mn2+, single turnover reactions on a 12 bp DNA substrate were examined by stopped-flow and quench-flow methods between pH 6.0 and 8.5. At each pH value, the apparent rate constants for phosphodiester hydrolysis increased hyperbolically with the concentration of MnCl2, thus allowing values to be determined for the intrinsic rate constant at saturation with Mn2+ and the equilibrium dissociation constant for Mn2+. The equilibrium constants showed no systematic variation across the pH range tested, while the rate constants increased steeply with increasing pH up to an asymptote above pH 7.5. At low pH conditions, the gradient of a plot of log (rate constant) against pH approached a value of 2. DNA cleavage by EcoRV thus requires the de-protonation of two acidic groups. To determine whether aspartate 36 is one of the groups, mutants of EcoRV were made with other amino acid residues at position 36. Glutamate caused a partial loss of activity, while all other replacements gave near-zero activities. In contrast to wild-type EcoRV, the mutant with glutamate required the de-protonation of only one acidic group for DNA cleavage. A mechanism for EcoRV is proposed in which the water molecule that hydrolyses the phosphodiester bond is de-protonated by two Bronsted bases, probably the ionised forms of aspartate 36 and glutamate 45.

DNA cleavage by the EcoRV restriction endonuclease: roles of divalent metal ions in specificity and catalysis

The roles of divalent metal ions in DNA cleavage by the EcoRV endonuclease were studied by using Co2+ or Mn2+ as substitutes for the natural cofactor Mg2+. In steady-state experiments with a 12 bp oligonucleotide substrate, Co2+ yielded a similar turnover rate to that with Mg2+, but Mn2+ gave a slower rate. Single turnovers of EcoRV on this substrate were analysed by stopped-flow and quench-flow methods, to determine the rates for the formation of the ternary enzyme-DNA-metal complex, the hydrolysis of the phosphodiester bonds and the dissociation of the cleaved DNA. With Co2+, all three steps had similar rates to those with Mg2+. In contrast, Mn2+ gave a faster rate for phosphodiester hydrolysis than either Mg2+ or Co2+, but a slower rate for product dissociation, thus accounting for its low turnover rate. Single turnovers on plasmids also yielded faster rates for substrate hydrolysis with Mn2+ compared to Mg2+ and Co2+. Since Mn2+ gave the most rapid rates for the hydrolytic step, despite being less electronegative than Co2+, the function of the metal ion at the active site of EcoRV cannot be just the polarisation of the scissile phosphate. Moreover, the minimal scheme for the Co2+-catalysed reaction requires two metal ions for DNA cleavage. The metal ions seem to be involved in the precise positioning of both the substrate and the water that acts as the attacking nucleophile and in activating that water molecule. A model is presented to account for how two metal ions might fulfil these functions.

Buffer effects on EcoRV kinetics as measured by fluorescent staining and digital imaging of plasmid cleavage

We have developed a protocol to quantify polymer DNA cleavage which replaces the traditional radiolabeling and scintillation counting with fluorescent staining and digital imaging. This procedure offers high sensitivity, speed, and convenience, while avoiding waste and error associated with traditional 32P radiolabeling. This protocol was used to measure cleavage of pBR322 plasmid DNA by EcoRV, a type II restriction enzyme. EcoRV was found to exhibit an order of magnitude difference in binding in two apparently similar buffers used in previous investigations. To determine the origin of this effect, we measured reaction kinetics in buffers of different chemical nature and concentration: Tris, bis-Tris propane, Tes, Hepes, and cacodylate. We found that buffer concentration and identity had significant effects on EcoRV reaction velocity through large changes in specific binding and nonspecific binding (reflected in the Michaelis constant Km and the dissociation constant for nonspecific binding Kns). There were only small changes in Vmax. The source of the buffer effect is the protonated amines common to many pH buffers. These buffer cations likely act as counterions screening DNA phosphates, where both the protonated buffer structure and concentration affect enzyme binding strength. It appears that by choosing anionic buffers or zwitterionic buffers with a buried positive charge, buffer influence on the protein binding to DNA can be largely eliminated.

The DNA binding characteristics of the trimeric EcoKI methyltransferase and its partially assembled dimeric form determined by fluorescence polarisation and DNA footprinting

The type I DNA restriction and modification systems of enteric bacteria display several enzymatic activities due to their oligomeric structure. Partially assembled forms of the EcoKI enzyme from E. coli K12 can display specific DNA binding properties and modification methyltransferase activity. The heterodimer of one specificity (S) subunit and one modification (M) subunit can only bind DNA whereas the addition of a second modification subunit to form M2S1 also confers methyltransferase activity. We have examined the DNA binding specificity of M1S1 and M2S1 using the change in fluorescence anisotropy which occurs on binding of a DNA probe labelled with a hexachlorofluorescein fluorophore. The dimer has much weaker affinity for the EcoKI target sequence than the trimer and slightly less ability to discriminate against other DNA sequences. Binding of both proteins is strongly dependent on salt concentration. The fluorescence results compare favourably with those obtained with the gel retardation method. DNA footprinting using exonucleaseIII and DNaseI, and methylation interference show no asymmetry, with both DNA strands being protected by the dimer and the trimer. This indicates that the dimer is a mixture of the two possible forms, M1S1 and S1M1. The dimer has a footprint on the DNA substrate of the same length as the trimer implying that the modification subunits are located on either side of the DNA helical axis rather than lying along the helical axis.

DNA excision by the Sfi I restriction endonuclease

A mechanism for the precise excision of DNA between two target sites was elucidated by analysing the individual steps during the reactions of the SfiI endonuclease on a plasmid with two SfiI sites. Previous studies had indicated that SfiI is a tetrameric protein that binds to two copies of its recognition site before cleaving both sites in both strands. In this study, the concerted cleavage of four phosphodiester bonds was shown to arise from four consecutive reactions that had similar values for their intrinsic rate constants. Each reaction is presumably mediated by one of the four active sites in the tetramer and all four were generally completed within the life-time of the complex between the protein and two recognition sites, though products cleaved in one or two phosphodiester bonds were also detected following premature dissociation of the enzyme-substrate complex at elevated temperatures. At the physiological temperature for this enzyme, all four bonds were cleaved within one minute but the subsequent dissociation of the enzyme-product complex, liberating the excised segment of DNA, took about one hour. The tetrameric structure for SfiI was confirmed by equilibrium centrifugation.

Intra- vs intersubunit communication in the homodimeric restriction enzyme EcoRV: Thr 37 and Lys 38 involved in indirect readout are only important for the catalytic activity of their own subunit

EcoRV is a dimer of two identical subunits which together form one binding site for the double-stranded DNA substrate. Concerted cleavage of both strands of the duplex requires intersubunit communication to synchronize the two catalytic centers of EcoRV. Here we address the question of how contacts to the DNA backbone trigger conformational changes which lead to the activation of both catalytic centers. The structure of the specific EcoRV-DNA complex shows that a region including amino acids Thr 37 and Lys 38 is involved in interactions with the DNA backbone and is a candidate for intersubunit communication. Homodimeric EcoRV T37A and K38A variants have a 1000-fold reduced catalytic activity. To examine whether Thr 37 and Lys 38 of one subunit affect the catalytic center in the same subunit and/or in the other subunit, we have produced heterodimeric variants containing a Thr 37 --> Ala or Lys 38 --> Ala substitution in one subunit combined with a wild type (wt) subunit (wt/T37A and wt/K38A) or with a subunit which contains an amino acid substitution (Asp 90 --> Ala) in the active site (D90A/T37A and D90A/K38A). Cleavage experiments with supercoiled pAT153 show that wt/T37A and wt/K38A preferentially nick the DNA. A steady-state kinetic analysis of the cleavage of an oligodeoxynucleotide substrate shows that the activity of wt/T37A and wt/K38A is half of that of wild type EcoRV, whereas D90A/T37A and D90A/K38A are almost inactive. These results demonstrate that Thr 37 and Lys 38 affect primarily the catalytic center in their own subunit and that both subunits of EcoRV can be activated independently of each other. We suggest that Thr 37 and Lys 38 control the catalytic activity of the active site in their own subunit by positioning alpha-helix B.