High-resolution AFM-imaging and mechanistic analysis of the 20 S proteasome

Occupancy of the HbYX hydrophobic pocket is sufficient to induce gate opening in the archaeal 20S proteasomes

Enhancing proteasome function has been a long-standing but challenging target of interest for the potential treatment of neurodegenerative diseases, emphasizing the importance of understanding proteasome activation mechanisms. Most proteasome activator complexes use the C-terminal HbYX motif to bind and trigger gate-opening in the 20S proteasome. This study defines a critical molecular interaction in the HbYX mechanism that triggers gate opening. Here, we focus on the Hb site interaction and find it plays a surprisingly central and crucial role in driving the allosteric conformational changes that induce gate opening in the archaeal 20S. We examined the cryo-EM structure of two mutant archaeal proteasomes, αV24Y T20S and αV24F T20S. These two mutants were engineered to place a bulky aromatic residue in the HbYX hydrophobic pocket and both mutants are highly active, though their mechanisms of activation are undefined. Collectively, our findings indicate that the interaction between the Hb group of the HbYX motif and its corresponding hydrophobic pocket is sufficient to induce gate opening in a mechanistically similar way to the HbYX motif. The involved activation mechanism appears to involve expansion of this hydrophobic binding site affecting the state of the IT switch to triggering gate-opening. Furthermore, we show that the canonical αK66 residue, understood to be critical for proteasome activator binding, plays a key role in stabilizing the open gate, irrespective of activator binding. This study differentiates between the residues in the HbYX motif that support binding interactions ("YX") versus those that allosterically contribute to gate opening (Hb). The insights reported here will guide future drug development efforts, particularly in designing small molecule proteasome activators, by targeting the identified hydrophobic pocket.

High resolution structures define divergent and convergent mechanisms of archaeal proteasome activation

Considering the link between neurodegenerative diseases and impaired proteasome function, and the neuro-protective impact of enhanced proteasome activity in animal models, it's crucial to understand proteasome activation mechanisms. A hydrophobic-tyrosine-any residue (HbYX) motif on the C-termini of proteasome-activating complexes independently triggers gate-opening of the 20S core particle for protein degradation; however, the causal allosteric mechanism remains unclear. Our study employs a structurally irreducible dipeptide HbYX mimetic to investigate the allosteric mechanism of gate-opening in the archaeal proteasome. High-resolution cryo-EM structures pinpoint vital residues and conformational changes in the proteasome α-subunit implicated in HbYX-dependent activation. Using point mutations, we simulated the HbYX-bound state, providing support for our mechanistic model. We discerned four main mechanistic elements triggering gate-opening: 1) back-loop rearrangement adjacent to K66, 2) intra- and inter- α subunit conformational changes, 3) occupancy of the hydrophobic pocket, and 4) a highly conserved isoleucine-threonine pair in the 20S channel stabilizing the open and closed states, termed the "IT switch." Comparison of different complexes unveiled convergent and divergent mechanism of 20S gate-opening among HbYX-dependent and independent activators. This study delivers a detailed molecular model for HbYX-dependent 20S gate-opening, enabling the development of small molecule proteasome activators that hold promise to treat neurodegenerative diseases.

Minimal mechanistic component of HbYX-dependent proteasome activation that reverses impairment by neurodegenerative-associated oligomers

The implication of reduced proteasomal function in neurodegenerative diseases combined with studies showing the protective effects of increasing proteasome activity in animal models highlight the need to understand the capacity for proteasome activation by small molecules. The C-terminal HbYX motif is present on many proteasome binding proteins and functions to tether activators to the 20S core particle. Previous studies have shown that peptides with a HbYX motif can autonomously activate 20S gate-opening to allow protein degradation. In this study, through an iterative process of peptide synthesis, we design a HbYX-like dipeptide mimetic that represents only the fundamental components of the HbYX motif. The mimetic robustly induces gate-opening in archaeal, yeast, and mammalian proteasomes. We identify multiple proteasome α subunit residues in the archaeal proteasome involved in HbYX-dependent activation. When stimulated by the mimetic, the mammalian 20S can degrade unfolded proteins such as tau. Findings using our peptide mimetic suggest the HbYX-dependent mechanism requires cooperative binding in at least two intersubunit pockets of the α ring. Most significantly, our peptide mimetic reverses proteasome impairment by neurodegenerative disease-associated oligomers. Collectively, these results validate HbYX-like molecules as having robust potential to stimulate proteasome function, which are potentially useful for treating neurodegenerative diseases.

Minimal mechanistic component of HbYX-dependent proteasome activation

The implication of reduced proteasomal function in neurodegenerative diseases combined with numerous studies showing the protective effects of increasing proteasome activity in animal models justify the need to understand how the proteasome is activated for protein degradation. The C-terminal HbYX motif is present on many proteasome binding proteins and functions to tether activators to the 20S core particle. Peptides with a HbYX motif can also autonomously activate 20S gate-opening to allow protein degradation, but the underlying allosteric molecular mechanism is not clear. We designed a HbYX-like dipeptide mimetic that represents only the fundamental components of the HbYX motif to allow rigorous elucidation of the underlying molecular mechanisms of HbYX induced 20S gate-opening in the archaeal and mamalian proteasome. By generating several high-resolution cryo-EM structures (e.g. 1.9Å) we identified multiple proteasome α subunit residues involved in HbYX-dependent activation and the conformational changes involved in gate-opening. In addition, we generated mutants probing these structural findings and identified specific point mutations that strongly activate the proteasome by partially mimicking a HbYX-bound state. These structures resolve 3 novel mechanistic features that are critical for allosteric α subunit conformational changes that ultimately trigger gate-opening: 1) rearrangement of the loop adjacent to K66, 2) inter- and intra- α subunit conformational changes and 3) a pair of IT residues on the α N-terminus in the 20S channel that alternate binding sites to stabilize the open and closed states. All gate-opening mechanisms appear to converge on this "IT switch". When stimulated by the mimetic, the human 20S can degrade unfolded proteins such as tau, and prevent proteasomal inhibition by toxic soluble oligomers. Collectively, the results presented here provide a mechanistic model of HbYX-dependent 20S gate-opening and offer proof of concept for the robust potential of HbYX-like small molecules to stimulate proteasome function, which could be useful to treat neurodegenerative diseases.

Structural Fluctuations of the Human Proteasome α7 Homo-Tetradecamer Double Ring Imply the Proteasomal α-Ring Assembly Mechanism

The 20S proteasome, which is composed of layered α and β heptameric rings, is the core complex of the eukaryotic proteasome involved in proteolysis. The α7 subunit is a component of the α ring, and it self-assembles into a homo-tetradecamer consisting of two layers of α7 heptameric rings. However, the structure of the α7 double ring in solution has not been fully elucidated. We applied cryo-electron microscopy to delineate the structure of the α7 double ring in solution, revealing a structure different from the previously reported crystallographic model. The D7-symmetrical double ring was stacked with a 15° clockwise twist and a separation of 3 Å between the two rings. Two more conformations, dislocated and fully open, were also identified. Our observations suggest that the α7 double-ring structure fluctuates considerably in solution, allowing for the insertion of homologous α subunits, finally converting to the hetero-heptameric α rings in the 20S proteasome.

Direct Visualization of the Binding of Transforming Growth Factor Beta 1 with Cartilage Oligomeric Matrix Protein via High-Resolution Atomic Force Microscopy

This work reports the first direct observations of binding and complex formation between transforming growth factor beta 1 (TGF-β1) and cartilage oligomeric matrix protein (COMP) using high-resolution atomic force microscopy (AFM). Each COMP molecule consists of pentamers whose five identical monomeric units bundle at N-termini. From this central point, the five monomers' flexible arms extend outward with C-terminal domains at the distal ends, forming a bouquet-like structure. In commonly used buffer solutions, TGF-β1 molecules typically form homodimers (majority), double dimers (minority), and aggregates (trace amount). Mixing TGF-β1 and COMP leads to rapid binding and complex formation. The TGF-β1/COMP complexes contain one to three COMP and multiple TGF-β1 molecules. For complexes with one COMP, the structure is more compact and less flexible than that of COMP alone. For complexes with two or more COMP molecules, the conformation varies to a large degree from one complex to another. This is attributed to the presence of double dimers or aggregates of TGF-β1 molecules, whose size and multiple binding sites enable binding to more than one COMP. The number and location of individual TGF-β1 dimers are also clearly visible in all complexes. This molecular-level information provides a new insight into the mechanism of chondrogenesis enhancement by TGF-β1/COMP complexes, i.e., simultaneous and multivalent presentation of growth factors. These presentations help explain the high efficacy in sustained activation of the signaling pathway to augment chondrogenesis.

Label-Free and Direct Visualization of Multivalent Binding of Bone Morphogenetic Protein-2 with Cartilage Oligomeric Matrix Protein

This work presents the first direct evidence of multivalent binding between bone morphogenetic protein-2 (BMP-2) and cartilage oligomeric matrix protein (COMP) using high-resolution atomic force microscopy (AFM) imaging. AFM topographic images reveal the molecular morphology of COMP, a pentameric protein whose five identical monomer units bundle together at N-termini, extending out with flexible chains to C-termini. Upon addition of BMP-2, COMP molecules undergo conformational changes at the C-termini to enable binding with BMP-2 molecules. AFM enables local structural changes of COMP to be revealed upon binding various numbers, 1-5, of BMP-2 molecules. These BMP-2/COMP complexes exhibit very different morphologies from those of COMP: much more compact and thus less flexible. These molecular-level insights deepen current understanding of the mechanism of how the BMP-2/COMP complex enhances osteogenesis among osteoprogenitor cells, i.e., multivalent presentation of BMP-2 via the stable and relatively rigid BMP-2/COMP complex could form a lattice of interaction between multiple BMP-2 and BMP-2 receptors. These ligand-receptor clusters lead to fast initiation and sustained activation of the Smad signaling pathway, resulting in enhanced osteogenesis. This work is also of translational importance as the outcome may enable use of lower BMP-2 dosage for bone repair and regeneration.

Controlling Protein Surface Orientation by Strategic Placement of Oligo-Histidine Tags

We report oriented immobilization of proteins using the standard hexahistidine (His6)-Ni2+:NTA (nitrilotriacetic acid) methodology, which we systematically tuned to give control of surface coverage. Fluorescence microscopy and surface plasmon resonance measurements of self-assembled monolayers (SAMs) of red fluorescent proteins (TagRFP) showed that binding strength increased by 1 order of magnitude for each additional His6-tag on the TagRFP proteins. All TagRFP variants with His6-tags located on only one side of the barrel-shaped protein yielded a 1.5 times higher surface coverage compared to variants with His6-tags on opposite sides of the so-called β-barrel. Time-resolved fluorescence anisotropy measurements supported by polarized infrared spectroscopy verified that the orientation (and thus coverage and functionality) of proteins on surfaces can be controlled by strategic placement of a His6-tag on the protein. Molecular dynamics simulations show how the differently tagged proteins reside at the surface in "end-on" and "side-on" orientations with each His6-tag contributing to binding. Also, not every dihistidine subunit in a given His6-tag forms a full coordination bond with the Ni2+:NTA SAMs, which varied with the position of the His6-tag on the protein. At equal valency but different tag positions on the protein, differences in binding were caused by probing for Ni2+:NTA moieties and by additional electrostatic interactions between different fractions of the β-barrel structure and charged NTA moieties. Potential of mean force calculations indicate there is no specific single-protein interaction mode that provides a clear preferential surface orientation, suggesting that the experimentally measured preference for the end-on orientation is a supra-protein, not a single-protein, effect.

Introduction to Atomic Force Microscopy (AFM) in Biology

The atomic force microscope (AFM) has the unique capability of imaging biological samples with molecular resolution in buffer solution over a wide range of time scales from milliseconds to hours. In addition to providing topographical images of surfaces with nanometer- to angstrom-scale resolution, forces between single molecules and mechanical properties of biological samples can be investigated from the nano-scale to the micro-scale. Importantly, the measurements are made in buffer solutions, allowing biological samples to "stay alive" within a physiological-like environment while temporal changes in structure are measured-e.g., before and after addition of chemical reagents. These qualities distinguish AFM from conventional imaging techniques of comparable resolution, e.g., electron microscopy (EM). This unit provides an introduction to AFM on biological systems and describes specific examples of AFM on proteins, cells, and tissues. The physical principles of the technique and methodological aspects of its practical use and applications are also described. © 2016 by John Wiley & Sons, Inc.

Atomic force microscopy of proteasome assemblies

The proteasome is the essential prime protease in all eukaryotes. The large, multisubunit, modular, and multifunctional enzyme is responsible for the majority of regulated intracellular protein degradation. It constitutes a part of the multienzyme ubiquitin-proteasome pathway, which is broadly implicated in recognition, tagging, and cleavage of proteins. The name "proteasome" refers to several types of protein assemblies sharing a common catalytic core particle. Additional protein modules attach to the core, regulate its activities, and broaden its functional capabilities. The structure of proteasomes has been studied extensively with multiple methods. The crystal structure of the core particle was solved for several species. However, only a single structure of the core particle decorated with PA26 activator has been determined. NMR spectroscopy was successfully applied to probe a much -simpler, archaebacterial type of the core particle. In turn, electron microscopy was very effective in exploring the spatial arrangement of many classes of assemblies. Still, the makeup of higher-order -complexes is not well established. Besides, the crystal structure provided very limited information on proteasome molecular dynamics. Atomic force microscopy (AFM) is an ideal technique to address questions that are unanswered by other approaches. For example, AFM is perfectly suited to study allosteric regulation of proteasome, the role of protein dynamics in enzymatic catalysis, and the spatial organization of modules and subunits in assemblies. Here, we present a method that probes the conformational diversity and dynamics of yeast core particle using the oscillating mode AFM in liquid. We are taking advantage of the observation that the tube-shaped core particle is equipped with a swinging gate leading to the catalytic chamber. We demonstrate how to identify distinct gate conformations in AFM images and how to characterize the gate dynamics controlled with ligands and disturbed by mutations.

Influence of multivalent nitrilotriacetic acid lipid-ligand affinity on the circulation half-life in mice of a liposome-attached His6-protein

Metal chelation-ligand interactions, such as occur between nitrilotriacetic acid (NTA)-nickel and multihistidines, enable the noncovalent attachment of histidine-modified proteins to liposomes and other particles. We compared three lipids: a mono-NTA lipid (ca. 10 microM affinity) and two tris-NTA lipid derivatives (ca. 3 nM and 0.2 nM affinity) in their ability to retain two different his(6)-containing proteins on NTA-liposomes in the presence of serum or plasma and after intravenous injection in mice. At nanomolar affinities, the off-rate of a his(6)-ligand is sufficiently long so that his(6)-proteins attached to particle surfaces will remain with the particle for hours; thus, we hypothesized that the increased his(6) affinity of multivalent NTA-modified liposomes would retain his(6)-proteins longer both in vitro and in vivo. For each of the three lipids, we found a robust association and complete activity retention of two his(6)-modified proteins: a far red-fluorescent protein, monomeric Katushka (mKate), and a prodrug-converting enzyme, yeast cytosine deaminase (yCD). Proteins associated more tightly in vitro with tris-NTA liposomes than with mono-NTA liposomes in the presence of refiltered fetal calf serum and mouse plasma. Free yCD exchanged with previously associated mKate for tris-NTA binding sites on the liposome surface. This exchange was due to the exchange of the proteins for NTA occupancy and not due to the exchange of tris-NTA lipid out of the liposome. The amount of yCD on the surface was similar if the proteins were co-associated or if mKate was pre-associated. This exchange confirms that NTA associated proteins are in a dynamic state and can exchange with multihistidine proteins in the biological milieu. There was no difference in circulation time of the protein when it was intravenously administered by itself or attached to any of the NTA-modified liposomes because in vivo the protein was rapidly released from the NTA liposomes. Upon recovery from blood, liposomes containing tris-NTA accumulated a different plasma protein profile than control liposomes, suggesting that Ni-NTA specifically interacts with some plasma proteins. The reason for the rapid protein dissociation from the liposome in vivo is not clear; it could be due to displacement by endogenous histidine-containing proteins or to natural chelators that remove nickel from the NTA. Regardless of the cause, improvements in chelator or ligand design are needed before metal chelation will be capable of retaining histidine-modified proteins on NTA liposomes after in vivo administration.

Pattern formation and molecular transport of histidine-tagged GFPs using supported lipid bilayers

We fabricated a heterogeneous supported lipid bilayer (SLB) by employing binary lipid mixtures comprising a saturated acyl chain DSPC and an unsaturated acyl chain nickel-chelating lipid. By using the specific adsorption properties of histidine-tagged proteins (His-tagged GFPs) in relation to nickel-chelating lipids, we demonstrated protein pattern formation on the SLB corresponding to the phase separation pattern of the SLB. In addition, by using a lipid mixture consisting of an unsaturated acyl chain DOPC and a nickel-chelating lipid, and His-tagged GFPs, we succeeded in transporting the proteins along a hydrophilic micropattern on a SiO(2) substrate. The protein transport is induced by the self-spreading behavior of a fluid SLB with a kinetic spreading coefficient beta = 10.4 microm(2) s(-1). This method provides a guide for strategically carrying various biomolecules to specific positions by using a soft biointerface on a solid surface. In addition, the results demonstrate the importance of using techniques that allow the controlled manipulation of biomolecules based on the static or dynamic properties of the SLB platform.

Insight into the complexation mode of bis(nitrilotriacetic acid) (NTA) ligands with Ni(2+) involved in the labeling of histidine-tagged proteins

According to literature reports and our own findings, the binding of new Ni(2+)-preloaded bis(nitrilotriacetic acid) (NTA) ligands with polyhistidine-tagged proteins has been found to be accompanied by a one- to two-order-of-magnitude increase in affinity, compared to the binding of a single Ni(2+)-preloaded NTA moiety. In spite of the introduction of a second NTA chelating group, a cooperative effect that is less than the theoretical maximum has been observed. Herein, we present a rational explanation for the observed stability of the ternary complex involving the postulated bis-NTA-(Ni(2+))(2) species and multivalent polyhistidine tags. We have found that prior to the formation of the ternary complex, the Ni(2+)-preloading step of bis-NTA ligands does not form the expected bis-NTA-(Ni(2+))(2) exclusively. Instead of the major formation of bis-NTA-(Ni(2+))(2) species, it appears that cyclic discrete 1:1 and 2:2 entities are predominantly formed. It is proposed that these species interact upon ring-opening with multivalent histidine tags. The occurrence of this phenomena accounts for the overall one- to two-order-of-magnitude increase in affinity of ternary complexes involving bis-NTA ligands.

A tetrahedral transition state at the active sites of the 20S proteasome is coupled to opening of the alpha-ring channel

Intrinsic conformational transitions contribute to the catalytic action of many enzymes. Here we use a single-molecule approach to demonstrate how such transitions are linked to the catalytic sites of the eukaryotic proteasome, an essential protease of the ubiquitin pathway. The active sites of the cylindrical proteasomal core particle are located in a central chamber accessible through gated entry channels. By using atomic force microscopy, we found continual alternation between open and closed gate conformations. We analyzed the relative abundance of these conformers in wild-type and mutated yeast core particles upon exposure to substrates or inhibitors. Our data indicate that the dynamic gate can be opened by allosteric coupling to a tetrahedral transition state at any of the working active centers. The results point to the N(alpha)-amine of the N-terminal active site threonyl residue as the major effector group responsible for triggering the essential conformational switch.

Atomic force microscopy as a tool to study the proteasome assemblies

Proteasome is an exceptional enzyme because of its essential physiological role, multiple activities, and structural complexity. It is, in fact, a family of enzymes sharing a common catalytic core and equipped with distinct protein attachments regulating the core and adding to its new functional capabilities. As a drug target and a major regulator of cellular processes, proteasome is extensively studied with tools of structural, biochemical, and molecular biology. Atomic force microscopy (AFM) besides X-ray crystallography and electron microscopy is one of the most attractive methods to study proteasome. The noninvasive nature of this method is particularly well suited for investigating the structure-function relationship within the core particle (CP) as well as in higher-order assemblies. Here we review, from the methodological point of view, AFM-based studies on the proteasome. First, we will present the application of height distribution analysis of proteasome complexes to dissect the subunit organization in the base of the regulatory particle (RP). The RP is considered the most physiologically important among all the attachments of the CP; however, its structure remains enigmatic. Then, we will outline the use of AFM imaging to research on structural dynamics of the proteasome, a phenomenon which is starting to gain a broad interest. We will finish with a brief presentation of nanotechnological studies performed using ordered proteasomes and nanolithography carried out with the particles. The presented AFM research offers a unique and often unexpected insight into the structure and function of the proteasome.

Chemical strategies for generating protein biochips

Protein biochips are at the heart of many medical and bioanalytical applications. Increasing interest has been focused on surface activation and subsequent functionalization strategies for immobilizing these biomolecules. Different approaches using covalent and noncovalent chemistry are reviewed; particular emphasis is placed on the chemical specificity of protein attachment and on retention of protein function. Strategies for creating protein patterns (as opposed to protein arrays) are also outlined. An outlook on promising and challenging future directions for protein biochip research and applications is also offered.

AFM of biological complexes: what can we learn?

The term "biological complexes" broadly encompasses particles as diverse as multisubunit enzymes, viral capsids, transport cages, molecular nets, ribosomes, nucleosomes, biological membrane components and amyloids. The complexes represent a broad range of stability and composition. Atomic force microscopy offers a wealth of structural and functional data about such assemblies. For this review, we choose to comment on the significance of AFM to study various aspects of biology of selected nonmembrane protein assemblies. Such particles are large enough to reveal many structural details under the AFM probe. Importantly, the specific advantages of the method allow for gathering dynamic information about their formation, stability or allosteric structural changes critical for their function. Some of them have already found their way to nanomedical or nanotechnological applications. Here we present examples of studies where the AFM provided pioneering information about the biology of complexes, and examples of studies where the simplicity of the method is used toward the development of potential diagnostic applications.

Introduction to atomic force microscopy (AFM) in biology

The atomic force microscope has the unique capability of imaging biological samples with molecular resolution in buffer solution. In addition to providing topographical images of surfaces with nanometer- to angstrom-scale resolution, forces between single molecules and mechanical properties of biological samples can be investigated. Importantly, the measurements are made in buffer solutions, allowing biological samples to stay alive within a physiological-like environment while temporal changes in structure are measured. This overview provides an introduction to AFM on biological systems and describes specific examples of AFM on proteins. The physical principles of the technique and methodological aspects of its practical use and applications are also described.

The central unit within the 19S regulatory particle of the proteasome

The 26S proteasome is a multisubunit enzyme composed of a cylindrical catalytic core (20S) and a regulatory particle (19S) that together perform the essential degradation of cellular proteins tagged by ubiquitin. To date, however, substrate trajectory within the complex remains elusive. Here we describe a previously unknown functional unit within the 19S, comprising two subunits, Rpn1 and Rpn2. These toroids physically link the site of substrate recruitment with the site of proteolysis. Rpn2 interfaces with the 20S, whereas Rpn1 sits atop Rpn2, serving as a docking site for a substrate-recruitment factor. The 19S ATPases encircle the Rpn1-Rpn2 stack, covering the remainder of the 20S surface. Both Rpn1-Rpn2 and the ATPases are required for substrate translocation and gating of the proteolytic channel. Similar pairing of units is found in unfoldases and nuclear transporters, exposing common features of these protein nanomachines.

Intravesicular and intervesicular interaction by orthogonal multivalent host-guest and metal-ligand complexation

Host vesicles composed of amphiphilic beta-cyclodextrin CD1 recognize metal-coordination complexes of the adamantyl-functionalized ethylenediamine ligand L via hydrophobic inclusion in the beta-cyclodextrin cavities at the vesicle surface. In the case of Cu(II) and L, the resulting coordination complex was exclusively CuL(2), and the interaction with the host vesicles was intravesicular, unless the concentration of metal complex and vesicles was high (>0.1 mM). In the case of Ni(II) and L, a mixture was formed consisting of mainly NiL and NiL(2), the interaction with the host vesicles was effectively intervesicular, and addition of the guest-metal complex resulted in aggregation of the vesicles into dense, multilamellar clusters even in dilute solution [1 microM Ni(II)]. The metal-L complex could be eliminated by a strong chelator such as EDTA, and the intervesicular interaction could be suppressed by a competitor such as unmodified beta-cyclodextrin. The result from this investigation is that the strongest metal-coordination complex [Cu(II) with L] binds exclusively intravesicularly, whereas the weakest metal-coordination complex [Ni(II) with L] binds predominantly intervesicularly and is the strongest interfacial binder. These experimental observations are confirmed by a thermodynamic model that describes multivalent orthogonal interactions at interfaces.

Synthesis of a multivalent chelator lipid for stably tethering histidine-tagged proteins onto membranes

This protocol describes the synthesis of a lipid-like molecule carrying a head group containing two nitrilotriacetic acid moieties. This multivalent chelator lipid can be incorporated into lipid membranes, to which histidine-tagged protein can then be tethered in an oriented fashion. Possible applications of this lipid are protein tethering to solid-supported membranes, to lipid vesicles or to live cells. As compared to conventional monovalent chelator lipids, this lipid can achieve highly stable tethering of proteins by the multivalent chelator head. The eight-step synthesis described in this protocol can be completed within 4-5 weeks.

Molecular printboards: versatile platforms for the creation and positioning of supramolecular assemblies and materials

This tutorial review describes the development of molecular printboards, which are tailor-made surfaces functionalized with receptor (host) molecules. Such substrates can be used for the binding of complementary ligand (guest) molecules through multivalent interactions. Supramolecular multivalent interactions are ideal to attain a quantitative and fundamental understanding of multivalency at interfaces. Because of their quantitative interpretation, the focus is on (i) the interaction of cyclodextrin host surfaces with multivalent hydrophobic guest molecules, (ii) the vancomycin-oligopeptide system, and (iii) the multivalent binding of histidine-tagged proteins to NiNTA receptor surfaces. The review will be of interest to researchers in the fields of supramolecular chemistry, chemical biology, surface chemistry, and molecular recognition.

High-affinity chelator thiols for switchable and oriented immobilization of histidine-tagged proteins: a generic platform for protein chip technologies

Protein micro-/nanoarrays are becoming increasingly important in systematic approaches for the exploration of protein-protein interactions and dynamic protein networks, so there is a high demand for specific, generic, stable, uniform, and locally addressable protein immobilization on solid supports. Here we present multivalent metal-chelating thiols that are suitable for stable binding of histidine-tagged proteins on biocompatible self-assembled monolayers (SAMs). The architectures and physicochemical properties of these SAMs have been probed by various surface-sensitive techniques such as contact angle goniometry, ellipsometry, and infrared reflection-absorption spectroscopy. The specific molecular organization of proteins and protein complexes was demonstrated by surface plasmon resonance, confocal laser scanning, and atomic force microscopy. In contrast to the mono-NTA/His6 tag interaction, which has major drawbacks because of its low affinity and fast dissociation, drastically improved stability of protein binding by these multivalent chelator surfaces was observed. The immobilized histidine-tagged proteins are uniformly oriented and retain their function. At the same time, proteins can be removed from the chip surface under mild conditions (switchability). This new platform for switchable and oriented immobilization should assist proteome-wide wide analyses of protein-protein interactions as well as structural and single-molecule studies.

Highbrow proteasome in high-throughput technology

Proteasome is a major protease of the ubiquitin-proteasome pathway involved in the regulation of practically all intracellular biochemical processes. The enzyme core is created by a heteromultimer of complex architecture built with multiple subunits arranged into a tube-like structure. The multiple active sites of diverse peptidase specificity are hidden inside the tube. Access to the interior is guarded by a gate formed by the N-termini of specialized subunits and by the attachment of additional multisubunit protein complexes controlling the enzymatic capabilities of the core. Proteasome, due to its Byzantine molecular architecture and equally sophisticated enzymatic mechanism, is by itself a fascinating biophysical object. Recently, the position of the protease advanced from an academically remarkable protein processor to a providential anticancer drug target and futuristic nanomachine. Proteomics studies actively shape our current understanding of the protease and direct the future applications of the proteasome in medicine.

Characterization of the HslU chaperone affinity for HslV protease

The HslVU complex is a bacterial two-component ATP-dependent protease, consisting of HslU chaperone and HslV peptidase. Investigation of protein-protein interactions using SPR in Escherichia coli HslVU and the protein substrates demonstrates that HslU and HslV have moderate affinity (Kd = 1 microM) for each other. However, the affinity of HslU for HslV fivefold increased (Kd approximately 0.2 microM) after binding with the MBP approximately SulA protein indicating the formation of a "ternary complex" of HslV-HslU-MBP approximately SulA. The molecular interaction studies also revealed that HslU strongly binds to MBP approximately SulA with 10(-9) M affinity but does not associate with nonstructured casein. Conversely, HslV does not interact with the MBP-SulA whereas it strongly binds with casein (Kd = 0.2 microM) requiring an intact active site of HslV. These findings provide evidence for "substrate-induced" stable HslVU complex formation. Presumably, the binding of HslU to MBP approximately SulA stimulates a conformational change in HslU to a high-affinity form for HslV.

A mathematical model of protein degradation by the proteasome

The proteasome is the major protease for intracellular protein degradation. The influx rate of protein substrates and the exit rate of the fragments/products are regulated by the size of the axial channels. Opening the channels is known to increase the overall degradation rate and to change the length distribution of fragments. We develop a mathematical model with a flux that depends on the gate size and a phenomenological cleavage mechanism. The model has Michaelis-Menten kinetics with a V(max) that is inversely related to the length of the substrate, as observed in the in vitro experiments. We study the distribution of fragment lengths assuming that proteasomal cleavage takes place at a preferred distance from the ends of a protein fragment, and find multipeaked fragment length distributions similar to those found experimentally. Opening the gates in the model increases the degradation rate, increases the average length of the fragments, and increases the peak in the distribution around a length of 8-10 amino acids. This behavior is also observed in immunoproteasomes equipped with PA28. Finally, we study the effect of re-entry of processed fragments in the degradation kinetics and conclude that re-entry is only expected to affect the cleavage dynamics when short fragments enter the proteasome much faster than the original substrate. In summary, the model proposed in this study captures the known characteristics of proteasomal degradation, and can therefore help to quantify MHC class I antigen processing and presentation.

Atomic force microscopy of the proteasome

The proteasome should be an ideal molecule for studies on large enzymatic complexes, given its multisubunit and modular structure, compartmentalized design, numerous activities, and its own means of regulation. Considering the recent increased interest in the ubiquitin-proteasome pathway, it is surprising that biophysical approaches to study this enzymatic assembly are applied with limited frequency. Methods including atomic force microscopy, fluorescence spectroscopy, surface plasmon resonance, and high-pressure procedures all have gained popularity in characterization of the proteasome. These methods provide significant and often unexpected insight regarding the structure and function of the enzyme. This chapter describes the use of atomic force microscopy for dynamic structural studies of the proteasome.

Metal-Chelating Amino Acids As Building Blocks For Synthetic Receptors Sensing Metal Ions And Histidine-Tagged Proteins

Protein structure and function rely on a still not fully understood interplay of energetic and entropic constraints defined by the permutation of the twenty genetically encoded amino acids. Many attempts have been undertaken to design peptide-peptide interaction pairs and synthetic receptors de novo by using this limited number of building blocks. We describe a rational approach to creating a building block based on a tailored metal-chelating amino acid. Nepsilon,Nepsilon-bis(carboxymethyl)-L-lysine can be flexibly introduced into peptides by 9-fluorenylmethoxycarbonyl solid-phase chemistry. The corresponding metal-chelating peptides act as metal sensors and synthetic receptors for histidine-tagged proteins. These biochemical tweezers will open new ways to control protein-protein interactions, to design peptide-based interaction pairs, or to generate switchable protein function.

Specific orientation and two-dimensional crystallization of the proteasome at metal-chelating lipid interfaces

The potential of a protein-engineered His tag to immobilize macromolecules in a predictable orientation at metal-chelating lipid interfaces was investigated using recombinant 20 S proteasomes His-tagged in various positions. Electron micrographs demonstrated that the orientation of proteasomes bound to chelating lipid films could be controlled via the location of their His tags: proteasomes His-tagged at their sides displayed exclusively side-on views, while proteasomes His-tagged at their ends displayed exclusively end-on views. The activity of proteasomes immobilized at chelating lipid interfaces was well preserved. In solution, His-tagged proteasomes hydrolyzed casein at rates comparable with wild-type proteasomes, unless the His tags were located in the vicinity of the N termini of alpha-subunits. The N termini of alpha-subunits might partly occlude the entrance channel in alpha-rings through which substrates enter the proteasome for subsequent degradation. A combination of electron micrographs and atomic force microscope topographs revealed a propensity of vertically oriented proteasomes to crystallize in two dimensions on fluid lipid films. The oriented immobilization of His-tagged proteins at biocompatible lipid interfaces will assist structural studies as well as the investigation of biomolecular interaction via a wide variety of surface-sensitive techniques including single-molecule analysis.

Observing structure, function and assembly of single proteins by AFM

Single molecule experiments provide insight into the individuality of biological macromolecules, their unique function, reaction pathways, trajectories and molecular interactions. The exceptional signal-to-noise ratio of the atomic force microscope allows individual proteins to be imaged under physiologically relevant conditions at a lateral resolution of 0.5-1nm and a vertical resolution of 0.1-0.2nm. Recently, it has become possible to observe single molecule events using this technique. This capability is reviewed on various water-soluble and membrane proteins. Examples of the observation of function, variability, and assembly of single proteins are discussed. Statistical analysis is important to extend conclusions derived from single molecule experiments to protein species. Such approaches allow the classification of protein conformations and movements. Recent developments of probe microscopy techniques allow simultaneous measurement of multiple signals on individual macromolecules, and greatly extend the range of experiments possible for probing biological systems at the molecular level. Biologists exploring molecular mechanisms will benefit from a burgeoning of scanning probe microscopes and of their future combination with molecular biological experiments.

Single molecule research on surfaces: from analytics to construction and back

The study of single molecules opens a new dimension in understanding nature down to its finest ramifications. While much progress was achieved in the last decade concerning the detection techniques, suitable techniques for manipulating and handling the biomolecules still bear a challenge. Primarily, the task is keeping an individual, active molecule of a certain lifespan in the spot. Here, we will focus on techniques for the functional immobilization of (single) molecules on surfaces to enable their observation at one position over a time period. Presenting the main methods of reversible immobilization we will accentuate the chelator lipid concept as combining all features prerequisite for functional, reversible and well-defined immobilization. This will also show that single molecule research in principle is the synthesis of an insight into the function of nature and nano-biotechnology (manipulation): thus of analytics, construction, and back.

From images to interactions: high-resolution phase imaging in tapping-mode atomic force microscopy

In tapping-mode atomic force microscopy, the phase shift between excitation and response of the cantilever is used as a material-dependent signal complementary to topography. The localization of information in the phase signal is demonstrated with 1.4-nm lateral resolution on purple membrane of Halobacterium salinarum in buffer solution. In a first-order approximation, the phase signal is found to correlate with modulations of the tip oscillation amplitude, induced by topography. Extending the analysis to contributions of the tip-sample interaction area as a second-order approximation, a method is proposed to extract information about the interaction from the phase signal for surfaces with a roughness in the order of the tip radius.

Novel methods for studying lipids and lipases and their mutual interaction at interfaces. Part I. Atomic force microscopy

Mono-layers of lipids and their interaction with surface active enzymes (lipases) have been studied for more than a century. During the past decade new insight into this area has been obtained due to the development of scanning probe microscopy. This novel method provides direct microscopic information about the system in question and allows in situ investigations under near physiological conditions. In the present review the theory, experimental set-up and sample requirements of atomic force microscopy (AFM) are described. An overview of recent results is also presented with special emphasis on lipase hydrolysis and kinetics investigated in situ using AFM.

Advances in the characterization of supported lipid films with the atomic force microscope

During the past decade, the atomic force microscope (AFM) has become a key technique in biochemistry and biophysics to characterize supported lipid films, as testified by the continuous growth in the number of papers published in the field. The unique capabilities of AFM are: (i) capacity to probe, in real time and in aqueous environment, the surface structure of lipid films; (ii) ability to directly measure physical properties at high spatial resolution; (iii) possibility to modify the film structure and biophysical processes in a controlled way. Such experiments, published up to June 2000, are the focus of the present review. First, we provide a general introduction on the preparation and characterization of supported lipid films as well as on the principles of AFM. The section 'Structural properties' focuses on the various applications of AFM for characterizing the structure of supported lipid films: visualization of molecular structure, formation of structural defects, effect of external agents, formation of supported films, organization of phase-separated films (coexistence region, mixed films) and, finally, the use of supported lipid bilayers for anchoring biomolecules such as DNA, enzymes and crystalline protein arrays. The section 'Physical properties' introduces the principles of force measurements by AFM, interpretation of these measurements and their recent application to supported lipid films and related structures. Finally, we highlight the major achievements brought by the technique and some of the current limitations.

Design of supported membranes tethered via metal-affinity ligand-receptor pairs

Model lipid layers are very promising in investigating the complex network of recognition, transport and signaling processes at membranes. We have developed a novel and generic approach to create supported lipid membranes tethered by metal-affinity binding. By self-assembly we have generated various interfaces that display histidine sequences (6xHis) via polymer spacers. These histidine-functionalized interfaces are designed to allow specific docking and fusion of vesicles containing metal-chelating lipids. By means of surface plasmon resonance and atomic force microscopy we analyzed the formation and subsequently the structure of these solid-supported membranes. Although the affinity constant of single ligand-receptor pairs is only in the micromolar range, very stable immobilization of these membranes was observed. This behavior can be explained by multivalent interactions resembling many features of cell adhesion. The process is highly specific, because vesicle docking and bilayer formation are strictly dependent on the presence of metal-affinity ligand-receptor pairs. The surface accessibility and geometry of these tethered membranes were probed by binding of histidine-tagged polypeptides. The supported membranes show adsorption kinetics and values similar to planar supported monolayers. Using various combinations of metal-chelating and histidine-tagged lipids or thiols these metal-affinity-tethered membranes should make a great impact on probing and eventually understanding the dynamic dialog of reconstituted membrane proteins.

Survey of the 1999 surface plasmon resonance biosensor literature

The application of surface plasmon resonance biosensors in life sciences and pharmaceutical research continues to increase. This review provides a comprehensive list of the commercial 1999 SPR biosensor literature and highlights emerging applications that are of general interest to users of the technology. Given the variability in the quality of published biosensor data, we present some general guidelines to help increase confidence in the results reported from biosensor analyses.

Immobilization of proteins on self-assembled monolayers

The immobilization of protein molecules on self-assembled monolayers (SAM) by physical interactions and chemical bonding has been studied using atomic force microscopy (AFM). The proteins used for our investigation are bovine serum albumin (BSA), lysozyme (LYZ), and normal rabbit immunoglobulin G (IgG). The surfaces are methyl-, hydroxyl-, carboxylic acid- and aldehyde-terminated SAMs. We found that BSA and LYZ can be readily immobilized on SAMs at their isoelectric point (IEP). The detailed surface morphology of adsorbed proteins varies with the functionality of the SAMs. The strong hydrophobic interaction at the IEP is attributed to immobilization. If the solution pH is deviated from the IEP, proteins may be attached onto the surface via electrostatic interactions. Covalent binding between the aldehyde-terminated SAM and the H2N-groups in the protein results in immobilization of all three proteins. The individual proteins and their orientations on SAMs are clearly resolved from high-resolution AFM images. The stability and bioactivity of these immobilized proteins are also studied.

A metal-chelating microscopy tip as a new toolbox for single-molecule experiments by atomic force microscopy

In recent years, the atomic force microscope (AFM) has contributed much to our understanding of the molecular forces involved in various high-affinity receptor-ligand systems. However, a universal anchor system for such measurements is still required. This would open up new possibilities for the study of biological recognition processes and for the establishment of high-throughput screening applications. One such candidate is the N-nitrilo-triacetic acid (NTA)/His-tag system, which is widely used in molecular biology to isolate and purify histidine-tagged fusion proteins. Here the histidine tag acts as a high-affinity recognition site for the NTA chelator. Accordingly, we have investigated the possibility of using this approach in single-molecule force measurements. Using a histidine-peptide as a model system, we have determined the binding force for various metal ions. At a loading rate of 0.5 microm/s, the determined forces varied from 22 +/- 4 to 58 +/- 5 pN. Most importantly, no interaction was detected for Ca(2+) and Mg(2+) up to concentrations of 10 mM. Furthermore, EDTA and a metal ion reloading step demonstrated the reversibility of the approach. Here the molecular interactions were turned off (EDTA) and on (metal reloading) in a switch-like fashion. Our results show that the NTA/His-tag system will expand the "molecular toolboxes" with which receptor-ligand systems can be investigated at the single-molecule level.

Atomic force microscopy reveals two conformations of the 20 S proteasome from fission yeast

The proteasome is a major cytosolic proteolytic complex, indispensable in eukaryotic cells. The barrel-shaped core of this enzyme, the 20 S proteasome, is built from 28 subunits forming four stacked rings. The two inner beta-rings harbor active centers, whereas the two outer alpha-rings play a structural role. Crystal structure of the yeast 20 S particle showed that the entrance to the central channel was sealed. Because of this result, the path of substrates into the catalytic chamber has remained enigmatic. We have used tapping mode atomic force microscopy (AFM) in liquid to address the dynamic aspects of the 20 S proteasomes from fission yeast. We present here evidence that, when observed with AFM, the proteasome particles in top view position have either open or closed entrance to the central channel. The preferred conformation depends on the ligands present. Apparently, the addition of a substrate to the uninhibited proteasome shifts the equilibrium toward the open conformation. These results shed new light on the possible path of the substrate into the proteolytic chamber.