Micromagnet arrays enable precise manipulation of individual biological analyte-superparamagnetic bead complexes for separation and sensing

In this article, we review lab on a chip (LOC) devices that have been developed for processing magnetically labelled biological analytes, e.g., proteins, nucleic acids, viruses and cells, based on micromagnetic structures and a time-varying magnetic field. We describe the methods that have been developed for fabricating micromagnetic arrays and the bioprocessing operations that have been demonstrated using superparamagnetic (SPM) beads, i.e., programmed transport, switching, separation of specific analytes, and pumping and mixing of fluids in microchannels. The primary advantage of micromagnet devices is that they make it possible to develop systems that control individual SPM beads, enabling high-efficiency separation and analysis. These devices do not require hydrodynamic control and lend themselves to parallel processing of large arrays of SPM beads with modest levels of power consumption. Micromagnet devices are well suited for bioanalytical applications that require high-resolution separation, e.g., detection of rare cell types such as circulating tumour cells, or biosensor applications that require multiple magnetic bioprocessing operations on a single chip.

Micromagnet arrays for on-chip focusing, switching, and separation of superparamagnetic beads and single cells

Nonlinear magnetophoresis (NLM) is a novel approach for on-chip transport and separation of superparamagnetic (SPM) beads, based on a travelling magnetic field wave generated by the combination of a micromagnet array (MMA) and an applied rotating magnetic field. Here, we present two novel MMA designs that allow SPM beads to be focused, sorted, and separated on-chip. Converging MMAs were used to rapidly collect the SPM beads from a large region of the chip and focus them into synchronised lines. We characterise the collection efficiency of the devices and demonstrate that they can facilitate on-chip analysis of populations of SPM beads using a single-point optical detector. The diverging MMAs were used to control the transport of the beads and to separate them based on their size. The separation efficiency of these devices was determined by the orientation of the magnetisation of the micromagnets relative to the external magnetic field and the size of the beads and relative to that of micromagnets. By controlling these parameters and the rotation of the external magnetic field we demonstrated the controlled transport of SPM bead-labelled single MDA-MB-231 cells. The use of these novel MMAs promises to allow magnetically-labelled cells to be efficiently isolated and then manipulated on-chip for analysis with high-resolution chemical and physical techniques.

In vitro study of the interaction of heregulin-functionalized magnetic–optical nanorods with MCF7 and MDA-MB-231 cells

Multifunctional nanoparticles that actively target specific cells are promising tools for cancer diagnosis and therapy. In this article we review the synthesis and surface chemistry of Fe–Au nanorods and their characterization using microscopy. The diameter of the rods used in this study was selected to be 150–200 nm so that they did not enter the cells. The 80 nm-long Au tips of the nanorods were functionalized with heregulin (HRG), and the micron-long Fe portion was coated with a poly(ethylene glycol) monolayer to minimize non-specific interactions. Nanorods functionalized with HRG were found to preferentially bind to MCF7 cells that express high levels of the receptor tyrosine-protein kinase ErbB2/3. Magnetic tweezers measurements were used to characterize the kinetic properties of the bond between the HRG on the rods and ErbB2/3 on the surface of the cells. The strong magnetization of Fe–Au nanorods makes them excellent candidates for in-vitro and in-vivo imaging, and magnetic therapeutic applications targeting cancer cells in circulation.

Structure, force, and energy of a double-stranded DNA oligonucleotide under tensile loads

The end-to-end stretching of a duplex DNA oligonucleotide has been studied using potential of mean force (PMF) calculations based on molecular dynamics (MD) simulations and atomic force microscopy (AFM) experiments. Near quantitative agreement between the calculations and experiments was obtained for both the extension length and forces associated with strand separation. The PMF calculations show that the oligonucleotide extends without a significant energetic barrier from a length shorter than A-DNA to a length 2.4 times the contour length of B-DNA at which the barrier to strand separation is encountered. Calculated forces associated with the barrier are 0.09 +/- 0.03 nN, based on assumptions concerning tip and thermal-activated barrier crossing contributions to the forces. Direct AFM measurements show the oligonucleotide strands separating at 2.6 +/- 0.8 contour lengths with a force of 0.13 +/- 0.05 nN. Analysis of the energies from the MD simulations during extension reveals compensation between increases in the DNA-self energy and decreases in the DNA-solvent interaction energy, allowing for the barrierless extension of DNA beyond the canonical B form. The barrier to strand separation occurs when unfavorable DNA interstrand repulsion cannot be compensated for by favorable DNA-solvent interactions. The present combination of single molecule theoretical and experimental approaches produces a comprehensive picture of the free energy surface of biological macromolecular structural transitions.

Advances in the characterization of supported lipid films with the atomic force microscope

During the past decade, the atomic force microscope (AFM) has become a key technique in biochemistry and biophysics to characterize supported lipid films, as testified by the continuous growth in the number of papers published in the field. The unique capabilities of AFM are: (i) capacity to probe, in real time and in aqueous environment, the surface structure of lipid films; (ii) ability to directly measure physical properties at high spatial resolution; (iii) possibility to modify the film structure and biophysical processes in a controlled way. Such experiments, published up to June 2000, are the focus of the present review. First, we provide a general introduction on the preparation and characterization of supported lipid films as well as on the principles of AFM. The section 'Structural properties' focuses on the various applications of AFM for characterizing the structure of supported lipid films: visualization of molecular structure, formation of structural defects, effect of external agents, formation of supported films, organization of phase-separated films (coexistence region, mixed films) and, finally, the use of supported lipid bilayers for anchoring biomolecules such as DNA, enzymes and crystalline protein arrays. The section 'Physical properties' introduces the principles of force measurements by AFM, interpretation of these measurements and their recent application to supported lipid films and related structures. Finally, we highlight the major achievements brought by the technique and some of the current limitations.

Implementation of force differentiation in the immunoassay

A technique has been developed to apply force to the antibody-antigen complex in a solid-phase immunoassay. Force was applied to the immunochemical complex by labeling the secondary antibody with a magnetically susceptible, micrometer-size particle and placing the assay chamber in a magnetic field of defined magnitude and orientation. The force was strong enough to displace weakly bound particles but was not strong enough to rupture the immunochemical complex. The number of particles bound to the surface after applying the differentiation force was related to the analyte concentration, thus an optical detection scheme was developed for counting the number of particles on the surface. The sensitivity of the force differentiation assay was demonstrated to be one to two orders of magnitude higher than conventional solid-phase immunoassay techniques for model protein, virus, and bacterial analytes, with 99% specificity. The enhanced sensitivity of this assay appears to result from lowering the assay background through the identification of weakly adhesive, nonspecific interactions.

Atomic force microscope image contrast mechanisms on supported lipid bilayers

This work presents a methodology to measure and quantitatively interpret force curves on supported lipid bilayers in water. We then use this method to correlate topographic imaging contrast in atomic force microscopy (AFM) images of phase-separated Langmuir-Blodgett bilayers with imaging load. Force curves collected on pure monolayers of both distearoylphosphatidylethanolamine (DSPE) and monogalactosylethanolamine (MGDG) and dioleoylethanolamine (DOPE) deposited at similar surface pressures onto a monolayer of DSPE show an abrupt breakthrough event at a repeatable, material-dependent force. The breakthrough force for DSPE and MGDG is sizable, whereas the breakthrough force for DOPE is too small to measure accurately. Contact-mode AFM images on 1:1 mixed monolayers of DSPE/DOPE and MGDG/DOPE have a high topographic contrast at loads between the breakthrough force of each phase, and a low topographic contrast at loads above the breakthrough force of both phases. Frictional contrast is inverted and magnified at loads above the breakthrough force of both phases. These results emphasize the important role that surface forces and mechanics can play in imaging multicomponent biomembranes with AFM.

Characterization of the physical properties of model biomembranes at the nanometer scale with the atomic force microscope

Interaction forces and topography of mixed phospholipid-glycolipid bilayers were investigated by atomic force microscopy (AFM) in aqueous conditions with probes functionalized with self-assembled monolayers terminating in hydroxy groups. Short-range repulsive forces were measured between the hydroxy-terminated probe and the surface of the two-dimensional (2-D) solid-like domains of distearoyl-phosphatidylethanolamine (DSPE) and digalactosyldiglyceride (DGDG). The form and range of the short-range repulsive force indicated that repulsive hydration/steric forces dominate the interaction at separation distances of 0.3-1.0 nm after which the probe makes mechanical contact with the bilayers. At loads < 5 nN the bilayer was elastically deformed by the probe, while at higher loads plastic deformation of the bilayer was observed. Surprisingly, a short-range repulsive force was not observed at the surface of the 2-D liquid-like dioleoylphosphatidylethanolamine (DOPE) film, despite the identical head groups of DOPE and DSPE. This provides direct evidence for the influence of the structure and mechanical properties of lipid bilayers on their interaction forces, an effect which may be a major importance in the control of biological processes such as cell adhesion and membrane fusion. The step height measured between lipid domains in the AFM topographic images was larger than could be accounted for by the thickness and mechanical properties of the molecules. A direct correlation was observed between the repulsive force range over the lipid domains and the topographic contrast, which provides direct insight into the fundamental mechanisms of AFM imaging in aqueous solutions. This study demonstrates that chemically modified AFM probes can be used in combination with patterned lipid bilayers as a novel and powerful approach to characterize the nanometer scale chemical and physical properties of heterogeneous biosurfaces such as cell membranes.

A biosensor based on magnetoresistance technology

We are developing a biosensor that will measure, at the level of single molecules, the forces that bind DNA-DNA, antibody-antigen, or ligand-receptor pairs together. The Bead Array Counter (BARC) will use these interaction forces to hold magnetic microbeads to a solid substrate. Microfabricated magnetoresistive transducers on the substrate will indicate whether or not the beads are removed when pulled by magnetic forces. By adapting magnetoresistive computer memory technology, it may be possible to fabricate millions of transducers on a chip and detect or screen thousands of analytes. The multi-analyte capability of this portable sensor would be ideal for on-site testing, while the potential to directly gauge intermolecular interaction strengths suggests drug discovery applications.

Scanning probe microscopy

During the past year, scanning probe microscopy, especially atomic force microscopy (AFM), has taken root in the biological sciences community, as is evident from the large number of publications and from the variety of specialized journals in which these papers appear. Furthermore, there is a strong indication that the technique is evolving from a qualitative imaging tool to a probe of the critical dimensions and properties of biomolecules and living cells. The next stage of the evolution involves the development of microinstruments for process control and sensing applications. Recent advances have been reported in AFM instrumentation and method. For example, the tapping mode of operation is becoming the method of choice to image biological molecules; work to extend tapping-mode operation in liquids has been reported. Biological molecules can also be imaged at low temperature in a cryo-AFM with improved resolution. The measurement of recognition forces between individual molecules continues to attract much attention and has spawned new concepts for ultra-sensitive biosensors. The AFM is being used increasingly for property measurements such as determining the viscoelastic properties of biological molecules. Finally, structural studies using the AFM abound. Some specific highlights include the mapping of DNA using restriction enzymes, imaging during DNA transcription and determining the mode of drug binding to DNA.

Covalent attachment of synthetic DNA to self-assembled monolayer films

The covalent attachment of thiol-modified DNA oligomers; to self-assembled monolayer silane films on fused silica and oxidized silicon substrates is described. A heterobifunctional crosslinking molecule bearing both thiol- and amino-reactive moieties was used to tether a DNA oligomer (modified at its terminus with a thiol group) to an aminosilane film formed on silica surfaces. A variety of aminosilanes, crosslinkers and treatment conditions have been tested to identify optimal conditions for DNA immobilization using this approach. The DNA films which result have been characterized using UV spectroscopy, water contact angle measurement, radiolabeling and hybridization methods.

Direct measurement of the forces between complementary strands of DNA

Interaction forces between single strands of DNA were measured with the atomic force microscope by a procedure in which DNA oligonucleotides were covalently attached to a spherical probe and surface. Adhesive forces measured between complementary 20-base strands fell into three distinct distributions centered at 1.52, 1.11, and 0.83 nano-newtons, which are associated with the rupture of the interchain interaction between a single pair of molecules involving 20, 16, and 12 base pairs, respectively. When a third long DNA molecule was coupled between complementary surfaces, both intra- and interchain forces were observed. The intrachain interaction resulting from the molecule's elasticity manifested itself as a long-range cohesive force.