Crystal structures of the chromosomal proteins Sso7d/Sac7d bound to DNA containing T-G mismatched base-pairs

Generation of Thermally Stable Affinity Pairs for Sensitive, Specific Immunoassays

Many point-of-care diagnostic tests rely on a pair of monoclonal antibodies that bind to two distinct epitopes of a molecule of interest. This protocol describes the identification and generation of such affinity pairs based on an easily produced small protein scaffold rcSso7d which can substitute monoclonal antibodies. These strong binding variants are identified from a large yeast display library. The approach described can be significantly faster than antibody generation and epitope binning, yielding affinity pairs synthesized in common bacterial protein synthesis strains, enabling the rapid generation of novel diagnostic tools.

Architectural roles of Cren7 in folding crenarchaeal chromatin filament

Archaea have evolved various strategies in chromosomal organization. While histone homologues exist in most archaeal phyla, Cren7 is a chromatin protein conserved in the Crenarchaeota. Here, we show that Cren7 preferentially binds DNA with AT-rich sequences over that with GC-rich sequences with a binding size of 6~7 bp. Structural studies of Cren7 in complex with either an 18-bp or a 20-bp double-stranded DNA fragment reveal that Cren7 binds to the minor groove of DNA as monomers in a head-to-tail manner. The neighboring Cren7 monomers are located on the opposite sides of the DNA duplex, with each introducing a single-step sharp kink by intercalation of the hydrophobic side chain of Leu28, bending the DNA into an S-shape conformation. A structural model for the chromatin fiber folded by Cren7 was established and verified by the analysis of cross-linked Cren7-DNA complexes by atomic force microscopy. Our results suggest that Cren7 differs significantly from Sul7, another chromatin protein conserved among Sulfolobus species, in both DNA binding and deformation. These data shed significant light on the strategy of chromosomal DNA organization in crenarchaea.

Engineering of DNA polymerase I from Thermus thermophilus using compartmentalized self-replication

Although compartmentalized self-replication (CSR) and compartmentalized partnered replication (CPR) are powerful tools for directed evolution of proteins and gene circuits, limitations remain in the emulsion PCR process with the wild-type Taq DNA polymerase used so far, including long run times, low amounts of product, and false negative results due to inhibitors. In this study, we developed a high-efficiency mutant of DNA polymerase I from Thermus thermophilus HB27 (Tth pol) suited for CSR and CPR. We modified the wild-type Tth pol by (i) deletion of the N-terminal 5' to 3' exonuclease domain, (ii) fusion with the DNA-binding protein Sso7d, (iii) introduction of four known effective point mutations from other DNA polymerase mutants, and (iv) codon optimization to reduce the GC content. Consequently, we obtained a mutant that provides higher product yields than the conventional Taq pol without decreased fidelity. Next, we performed four rounds of CSR selection with a randomly mutated library of this modified Tth pol and obtained mutants that provide higher product yields in fewer cycles of emulsion PCR than the parent Tth pol as well as the conventional Taq pol.

Extensive Assessment of Various Computational Methods for Aspartate's pKa Shift

A series of computational methods for pK_a shift prediction are extensively tested on a set of benchmark protein systems, aiming at identifying pitfalls and evaluating their performance on high variants. Including 19 ASP residues in 10 protein systems, the benchmark set consists of both residues with highly shifted pK_a values as well as those varying little from the reference value, with an experimental RMS free energy differences of 2.49 kcal/mol with respect to blocked amino acid, namely the RMS pK_a shift being 1.82 pK_a units. The constant pH molecular dynamics (MD), alchemical methods, PROPKA3.1, and multiconformation continuum electrostatics give RMSDs of 1.52, 2.58, 1.37, and 3.52 pK_a units, respectively, on the benchmark set. The empirical scoring method is the most accurate one with extremely low computational cost, and the pH-dependent model is also able to provide accurate results, while the accuracy of MD sampling incorporating alchemical free energy simulation is prohibited by convergence achievement and the performance of conformational search incorporating multiconformation continuum electrostatics is bad. Former research works did not define statistical uncertainty with care and yielded the questionable conclusion that alchemical methods perform well in most benchmarks. In this work the traditional alchemical methods are thoroughly tested for high variants. We also performed the first application of nonequilibrium alchemical methods to the pK_a cases.

Beyond Antibodies as Binding Partners: The Role of Antibody Mimetics in Bioanalysis

The emergence of novel binding proteins or antibody mimetics capable of binding to ligand analytes in a manner analogous to that of the antigen-antibody interaction has spurred increased interest in the biotechnology and bioanalytical communities. The goal is to produce antibody mimetics designed to outperform antibodies with regard to binding affinities, cellular and tumor penetration, large-scale production, and temperature and pH stability. The generation of antibody mimetics with tailored characteristics involves the identification of a naturally occurring protein scaffold as a template that binds to a desired ligand. This scaffold is then engineered to create a superior binder by first creating a library that is then subjected to a series of selection steps. Antibody mimetics have been successfully used in the development of binding assays for the detection of analytes in biological samples, as well as in separation methods, cancer therapy, targeted drug delivery, and in vivo imaging. This review describes recent advances in the field of antibody mimetics and their applications in bioanalytical chemistry, specifically in diagnostics and other analytical methods.

Insights into the Structure of Sulfolobus Nucleoid Using Engineered Sac7d Dimers with a Defined Orientation

The structure of Archaeal chromatin or nucleoid is believed to have characteristics similar to that found in both eukaryotes and bacteria. Recent comparative studies have suggested that DNA compaction in Archaea requires a bridging protein (e.g., Alba) along with either a wrapping protein (e.g., a histone) or a bending protein such as Sac7d. While X-ray crystal structures demonstrate that Sac7d binds as a monomer to create a significant kink in duplex DNA, the structure of a multiprotein-DNA complex has not been established. Using cross-linked dimers of Sac7d with a defined orientation, we present evidence that indicates that Sac7d is able to largely coat duplex DNA in vivo by binding in alternating head-to-head and tail-to-tail orientations. Although each Sac7d monomer promotes a significant kink of nearly 70°, coated DNA is expected to be largely extended because of compensation of repetitive kinks with helical symmetry.

Affinity transfer to the archaeal extremophilic Sac7d protein by insertion of a CDR

Artificially transforming a scaffold protein into binders often consists of introducing diversity into its natural binding region by directed mutagenesis. We have previously developed the archaeal extremophilic Sac7d protein as a scaffold to derive affinity reagents (Affitins) by randomization of only a flat surface, or a flat surface and two short loops with natural lengths. Short loops are believed to contribute to stability of extremophilic proteins, and loop extension has been reported detrimental for the thermal and chemical stabilities of mesophilic proteins. In this work, we wanted to evaluate the possibility of designing target-binding proteins based on Sac7d by using a complementary determining region (CDR). To this aim, we inserted into three different loops a 10 residues CDR from the cAb-Lys3 anti-lysozyme camel antibody. The chimeras obtained were as stable as wild-type (WT) Sac7d at extreme pH and their structural integrity was supported. Chimeras were thermally stable, but with T(m)s from 60.9 to 66.3°C (cf. 91°C for Sac7d) which shows that loop extension is detrimental for thermal stability of Sac7d. The loop 3 enabled anti-lysozyme activity. These results pave the way for the use of CDR(s) from antibodies and/or extended randomized loop(s) to increase the potential of binding of Affitins.

Model of a DNA-protein complex of the architectural monomeric protein MC1 from Euryarchaea

In Archaea the two major modes of DNA packaging are wrapping by histone proteins or bending by architectural non-histone proteins. To supplement our knowledge about the binding mode of the different DNA-bending proteins observed across the three domains of life, we present here the first model of a complex in which the monomeric Methanogen Chromosomal protein 1 (MC1) from Euryarchaea binds to the concave side of a strongly bent DNA. In laboratory growth conditions MC1 is the most abundant architectural protein present in Methanosarcina thermophila CHTI55. Like most proteins that strongly bend DNA, MC1 is known to bind in the minor groove. Interaction areas for MC1 and DNA were mapped by Nuclear Magnetic Resonance (NMR) data. The polarity of protein binding was determined using paramagnetic probes attached to the DNA. The first structural model of the DNA-MC1 complex we propose here was obtained by two complementary docking approaches and is in good agreement with the experimental data previously provided by electron microscopy and biochemistry. Residues essential to DNA-binding and -bending were highlighted and confirmed by site-directed mutagenesis. It was found that the Arg25 side-chain was essential to neutralize the negative charge of two phosphates that come very close in response to a dramatic curvature of the DNA.

Archaeal chromatin proteins

Archaea, along with Bacteria and Eukarya, are the three domains of life. In all living cells, chromatin proteins serve a crucial role in maintaining the integrity of the structure and function of the genome. An array of small, abundant and basic DNA-binding proteins, considered candidates for chromatin proteins, has been isolated from the Euryarchaeota and the Crenarchaeota, the two major phyla in Archaea. While most euryarchaea encode proteins resembling eukaryotic histones, crenarchaea appear to synthesize a number of unique DNA-binding proteins likely involved in chromosomal organization. Several of these proteins (e.g., archaeal histones, Sac10b homologs, Sul7d, Cren7, CC1, etc.) have been extensively studied. However, whether they are chromatin proteins and how they function in vivo remain to be fully understood. Future investigation of archaeal chromatin proteins will lead to a better understanding of chromosomal organization and gene expression in Archaea and provide valuable information on the evolution of DNA packaging in cellular life.

Hydration studies on the archaeal protein Sso7d using NMR measurements and MD simulations

Background

How proteins approach surrounding molecules is fundamental to our understanding of the specific interactions that occur at the surface of proteins. The enhanced surface accessibility of small molecules such as organic solvents and paramagnetic probes to protein binding sites has been observed; however, the molecular basis of this finding has not been fully established. Recently, it has been suggested that hydration dynamics play a predominant role in controlling the distribution of hot spots on surface of proteins.

Results

In the present study, the hydration of the archaeal multifunctional protein Sso7d from Solfolobus solfataricus was investigated using a combination of computational and experimental data derived from molecular dynamics simulations and ePHOGSY NMR spectroscopy.

Conclusions

We obtained a convergent protein hydration landscape that indicated how the shape and stability of the Sso7d hydration shell could modulate the function of the protein. The DNA binding domain overlaps with the protein region involved in chaperon activity and this domain is hydrated only in a very small central region. This localized hydration seems to favor intermolecular approaches from a large variety of ligands. Conversely, high water density was found in surface regions of the protein where the ATP binding site is located, suggesting that surface water molecules play a role in protecting the protein from unspecific interactions.

Molecular simulations on the thermal stabilization of DNA by hyperthermophilic chromatin protein Sac7d, and associated conformational transitions

Sac7d belongs to a family of chromosomal proteins, which are crucial for thermal stabilization of DNA at higher growth temperatures. It is capable of binding DNA nonspecifically, and is responsible for the increase in the melting temperature of DNA in the bound form up to 85 °C. Molecular dynamics (MD) simulations were performed at different temperatures on two protein-DNA complexes of Sac7d. Various structural and energetic parameters were calculated to examine the DNA stability and to investigate the conformational changes in DNA and the protein-DNA interactions. Room temperature simulations indicated very good agreement with the experimental structures. The protein structure is nearly unchanged at both 300 and 360 K, and only up to five base pairs of the DNA are stabilized by Sac7d at 360 K. However, the MD simulations on DNA alone systems show that they lose their helical structures at 360 K further supporting the role of Sac7d in stabilizing the oligomers. At higher temperatures (420 and 480 K), DNA undergoes denaturation in the presence and the absence of the protein. The DNA molecules were found to undergo B- to A-form transitions consistent with experimental studies, and the extent of these transitions are examined in detail. The extent of sampling B- and A-form regions was found to show temperature and sequence dependence. Multiple MD simulations yielded similar results validating the proposed model. Interaction energy calculations corresponding to protein-DNA binding indicates major contribution due to DNA backbone, explaining the nonspecific interactions of Sac7d.

Refined solution structure and backbone dynamics of the archaeal MC1 protein

The 3D structure of methanogen chromosomal protein 1 (MC1), determined with heteronuclear NMR methods, agrees with its function in terms of the shape and nature of the binding surface, whereas the 3D structure determined with homonuclear NMR does not. The structure features five loops, which show a large distribution in the ensemble of 3D structures. Evidence for the fact that this distribution signifies internal mobility on the nanosecond time scale was provided by using (15)N-relaxation and molecular dynamics simulations. Structural variations of the arm (11 residues) induced large shape anisotropy variations on the nanosecond time scale that ruled out the use of the model-free formalism to analyze the relaxation data. The backbone dynamics analysis of MC1 was achieved by comparison with 20 ns molecular dynamics trajectories. Two β-bulges showed that hydrogen bond formation correlated with ϕ and ψ dihedral angle transitions. These jumps were observed on the nanosecond time scale, in agreement with a large decrease in (15)N-NOE for Gly17 and Ile89. One water molecule bridging NH(Glu87) and CO(Val57) through hydrogen bonding contributed to these dynamics. Nanosecond slow motions observed in loops LP3 (35-42) and LP5 (67-77) reflected the lack of stable hydrogen bonds, whereas the other loops, LP1 (10-14), LP2 (22-24), and LP4 (50-53), were stabilized by several hydrogen bonds. Dynamics are often directly related to function. Our data strongly suggest that residues belonging to the flexible regions of MC1 could be involved in the interaction with DNA.

Artificial binding proteins (Affitins) as probes for conformational changes in secretin PulD

The DNA-binding protein Sac7d was previously modified to bind with high affinity to the N domain of the outer membrane secretin PulD from the bacterium Klebsiella oxytoca. Here, we show that binding of the Sac7d derivatives (affitins) to PulD is sensitive to conformational changes caused by denaturant and by the zwitterionic detergent Zwittergent 3-14 routinely used to extract secretins from outer membranes. This sensitivity to the conformational state of PulD allowed us to use the affitins as probes for the native structure of PulD and to devise protocols for examining in vitro synthesized protein in nonionic detergent and for the affinity purification of native PulD using affitins as ligands. When fused to periplasmic PhoA, three affitins inhibited PulD multimerization in vivo and caused loss of function. In two cases, this was likely to be due to dimerization of the affitin by the bound PhoA, as the effect was absent when the affitins were fused to monomeric MalE. In the third case, the MalE and PhoA moieties probably interfered sterically with PulD protomer interactions and, thereby, inhibited multimerization. None of the affitins tested interacted with PulD at sites of protomer interaction or blocked the secretin channel through which exoproteins cross the outer membrane in the Type II secretion pathway of which PulD is a key component.

Molecular dynamics and principal components analysis of human telomeric quadruplex multimers

Guanine-rich DNA repeat sequences located at the terminal ends of chromosomal DNA can fold in a sequence-dependent manner into G-quadruplex structures, notably the terminal 150-200 nucleotides at the 3' end, which occur as a single-stranded DNA overhang. The crystal structures of quadruplexes with two and four human telomeric repeats show an all-parallel-stranded topology that is readily capable of forming extended stacks of such quadruplex structures, with external TTA loops positioned to potentially interact with other macromolecules. This study reports on possible arrangements for these quadruplex dimers and tetramers, which can be formed from 8 or 16 telomeric DNA repeats, and on a methodology for modeling their interactions with small molecules. A series of computational methods including molecular dynamics, free energy calculations, and principal components analysis have been used to characterize the properties of these higher-order G-quadruplex dimers and tetramers with parallel-stranded topology. The results confirm the stability of the central G-tetrads, the individual quadruplexes, and the resulting multimers. Principal components analysis has been carried out to highlight the dominant motions in these G-quadruplex dimer and multimer structures. The TTA loop is the most flexible part of the model and the overall multimer quadruplex becoming more stable with the addition of further G-tetrads. The addition of a ligand to the model confirms the hypothesis that flat planar chromophores stabilize G-quadruplex structures by making them less flexible.

Remodeling a DNA-binding protein as a specific in vivo inhibitor of bacterial secretin PulD

We engineered a class of proteins that binds selected polypeptides with high specificity and affinity. Use of the protein scaffold of Sac7d, belonging to a protein family that binds various ligands, overcomes limitations inherent in the use of antibodies as intracellular inhibitors: it lacks disulfide bridges, is small and stable, and can be produced in large amounts. An in vitro combinatorial/selection approach generated specific, high-affinity (up to 140 pM) binders against bacterial outer membrane secretin PulD. When exported to the Escherichia coli periplasm, they inhibited PulD oligomerization, thereby blocking the type II secretion pathway of which PulD is part. Thus, high-affinity inhibitors of protein function can be derived from Sac7d and can be exported to, and function in, a cell compartment other than that in which they are produced.

Interactions and dynamics of the Shine Dalgarno helix in the 70S ribosome

The crystal structure of an initiation-like 70S ribosome complex containing an 8-bp Shine-Dalgarno (SD) helix was determined at 3.8-A resolution. Translation-libration-screw analysis showed that the inherent anisotropic motions of the SD helix were biased along its helical axis, suggesting that during the first step of translocation, the SD helix moves along its helical screw axis. Contacts between the SD helix and the ribosome were primarily through interactions with helices 23a, 26, and 28 of 16S rRNA. Contact with the neck (helix 28) of the 30S subunit near its hinge point suggests that formation of the SD helix could affect positioning of the head of the 30S subunit for optimal interaction with initiator tRNA. The bulged U723 in helix 23a interacts with the minor groove of the SD helix at the C1539.G-10 base pair, explaining its selective conservation in bacteria and archaea.

An acetylase with relaxed specificity catalyses protein N-terminal acetylation in Sulfolobus solfataricus

N-terminal protein acetylation is common in eukaryotes and halophilic archaea, but very rare in bacteria. We demonstrate that some of the most abundant proteins present in the crenarchaeote Sulfolobus solfataricus, including subunits of the thermosome, proteosome and ribosome, are acetylated at the N-terminus. Modification was observed at the N-terminal residues serine, alanine, threonine and methionine-glutamate. A conserved archaeal protein, ssArd1, was cloned and expressed in Escherichia coli, and shown to acetylate the same N-terminal sequences in vitro. The specific activity of ssArd1 is sensitive to protein structure in addition to sequence context. The crenarchaeota and euryarchaeota apparently differ in respect of the frequency of acetylation of Met-Glu termini, which appears much more common in S. solfataricus. This sequence is acetylated by the related Nat3 acetylase in eukarya. ssArd1 thus has a relaxed sequence specificity compared with the eukaryotic N-acetyl transferases, and may represent an ancestral form of the enzyme. This represents another example where archaeal molecular biology resembles that in eukaryotes rather than bacteria.

Probing the DNA kink structure induced by the hyperthermophilic chromosomal protein Sac7d

Sac7d, a small, abundant, sequence-general DNA-binding protein from the hyperthermophilic archaeon Sulfolobus acidocaldarius, causes a single-step sharp kink in DNA (∼60°) via the intercalation of both Val26 and Met29. These two amino acids were systematically changed in size to probe their effects on DNA kinking. Eight crystal structures of five Sac7d mutant–DNA complexes have been analyzed. The DNA-binding pattern of the V26A and M29A single mutants is similar to that of the wild-type, whereas the V26A/M29A protein binds DNA without side chain intercalation, resulting in a smaller overall bending (∼50°). The M29F mutant inserts the Phe29 side chain orthogonally to the C2pG3 step without stacking with base pairs, inducing a sharp kink (∼80°). In the V26F/M29F-GCGATCGC complex, Phe26 intercalates deeply into DNA bases by stacking with the G3 base, whereas Phe29 is stacked on the G15 deoxyribose, in a way similar to those used by the TATA box-binding proteins. All mutants have reduced DNA-stabilizing ability, as indicated by their lower T_m values. The DNA kink patterns caused by different combinations of hydrophobic side chains may be relevant in understanding the manner by which other minor groove-binding proteins interact with DNA.

The role of the salt concentration, proton, and phosphate binding on the thermal stability of wild and cloned DNA-binding protein Sso7d from Sulfolobus solfataricus

The acidic pH (1.5-7.0) and ionic strength (0.005-0.2M) dependence of thermodynamic functions of protein Sso7d from Sulfolobus solfataricus, cloned (c-Sso7d) and N-heptapeptide deleted [c-des(1-7)Sso7d] in glycine, and phosphate buffers was studied by means of adiabatic scanning calorimetry. The difference of proton binding was estimated from deltaHcal(pH), Td(pH), and (deltaTd/deltapH). It was found that a single group non-co-operative ionization with apparent pKa = 3.25 for both cloned and deleted proteins govern the thermal unfolding of two different (protonated and unprotonated) forms. deltaH degrees is found to be pH-independent and the changes in stability (deltaG degrees ) originate from changes in entropy terms. The apparent pKa measured at high salt concentrations decreases with 0.5 pH units from glycine to phosphate and the free energy of transfer at high ionic strength is 0.7 kcal/mol. The ionic strength dependence for the pH-dependent D-states is very different at pH 6.0 and 1.5. This is consistent with the property of denatured state to be more compacted or "closed" (Dc) at neutral or weak acidic pH and more random or "open" (Do) at acidic pH. From the Bjerrum's relation was found the number of screened charges important for the unfolding process. The main conclusions are: (1) the thermal stability of Sso7d has prominently entropic nature; (2) a single non-co-operative ionization controls the conformations in the D-state; and (3) pH-dependent conformational equilibrium could be functionally important in Sso7d-DNA recognition.

Structural and dynamic effects of α-Helix deletion in Sso7d: Implications for protein thermal stability

Sso7d is a 62-residue protein from the hyperthemophilic archaeon Sulfolobus solfataricus with a denaturation temperature close to 100 degrees C around neutral pH. An engineered form of Sso7d truncated at leucine 54 (L54Delta) is significantly less stable, with a denaturation temperature of 53 degrees C. Molecular dynamics (MD) studies of Sso7d and its truncated form at two different temperatures have been performed. The results of the MD simulations at 300 K indicate that: (1) the flexibility of Sso7d chain at 300 K agrees with that detected from X-ray and NMR structural studies; (2) L54Delta remains stable in the native folded conformation and possesses an overall dynamic behavior similar to that of the parent protein. MD simulations performed at 500 K, 10 ns long, indicate that, while Sso7d is in-silico resistant to high temperature, the truncated variant partially unfolds, revealing the early phases of the thermal unfolding pathway of the protein. Analysis of the trajectories of L54Delta suggests that the unzipping of the N-terminal and C-terminal beta-strands should be the first event of the unfolding pathway, and points out the regions more resistant to thermal unfolding. These findings allow one to understand the role played by specific interactions connecting the two ends of the chain for the high thermal stability of Sso7d, and support recent hypotheses on its folding mechanism emerged from site-directed mutagenesis studies.

Computation of DNA backbone conformations

We present an algorithm for the computation of 2'-deoxyribose-phosphodiester backbone conformations that are stereochemically compatible with a given arrangement of nucleic acid bases in a DNA structure. The algorithm involves the sequential computation of 2'-deoxyribose and phosphodiester conformers (collectively referred to as a backbone 'segment'), beginning at the 5'-end of a DNA strand. Computation of the possible segment conformations is achieved by the initial creation of a fragment library, with each fragment representing a set of bond lengths, bond angles and torsion angles. Following exhaustive searching of sugar conformations, each segment conformation is reduced to a single vector, defined by a specific distance, angle and torsion angle, that allows calculation of the O(1)' position. A given 'allowed' conformation of a backbone segment is determined based on its compatibility with the base positions and with the position of the preceding backbone segment. Initial computation of allowable segment conformations of a strand is followed by the determination of continuous backbone solutions for the strand, beginning at the 3'-end. The algorithm is also able to detect repeating segment conformations that arise in structures containing geometrically repeating dinucleotide steps. To illustrate the utility and properties of the algorithm, we have applied it to a series of experimental DNA structures. Regardless of the conformational complexity of these structures, we are able to compute backbone conformations for each structure. Hence, the algorithm, which is currently implemented within a new computer program NASDAC (Nucleic Acids: Structure, Dynamics and Conformation), should have generally applicability to the computation of DNA structures.

Archaeal chromatin and transcription

Archaea contain a variety of sequence-independent DNA binding proteins consistent with the evolution of several different, sometimes overlapping and exchangeable solutions to the problem of genome compaction. Some of these proteins undergo residue-specific post-translational lysine acetylation or methylation, hinting at analogues of the histone modifications that regulate eukaryotic chromatin structure and transcription. Archaeal transcription initiation most closely resembles the eukaryotic RNA polymerase II (RNAPII) system, but Archaea do not appear to have homologues of the multisubunit complexes that remodel eukaryotic chromatin and activate RNAPII initiation. In contrast, they have sequence-specific regulators that repress and perhaps activate archaeal transcription by mechanisms superficially similar to the bacterial paradigm of regulating promoter binding by RNAP. Repressors compete with archaeal TATA-box binding protein (TBP) and TFB for the TATA-box and TFB-recognition elements (BRE) of the archaeal promoter, or with archaeal RNAP for the site of transcription initiation. Transcript-specific regulation by repressors binding to sites of transcript initiation is consistent with such sites having very little sequence conservation. However, most Archaea have only one TBP and/or TFB that presumably must therefore bind to similar TATA-box and BRE sequences upstream of most genes. Repressors that function by competing with TBP and/or TFB binding must therefore also make additional contacts with transcript-specific regulatory sites adjacent or remote from the TATA-box/BRE region. The fate of the archaeal TBP and TFB following transcription initiation remains to be determined. Based on functional homology with their eukaryotic RNAPII-system counterparts, archaeal TBP and possibly also TFB should remain bound to the TATA-box/BRE region after transcription initiation. However, this seems unlikely as it might limit repressor competition at this site to only the first round of transcription initiation.

The Tudor domain 'Royal Family': Tudor, plant Agenet, Chromo, PWWP and MBT domains

We have identified a family of 'Agenet' domains that are plant-specific homologs of Tudor domains. This finding has been extended, using a combination of sequence- and structure-dependent approaches, to show that the three beta-stranded core regions of Tudor, PWWP, chromatin-binding (Chromo) and MBT domains are homologous because they originate from a common ancestor. In addition, we have revealed pairs of tandem repeats in the fragile X mental retardation protein (FMRP) family that are also members of this Tudor domain 'Royal Family'.

Effects of polyamines on the thermal stability and formation kinetics of DNA duplexes with abnormal structure

The effects of ions (i.e. Na+, Mg2+ and polyamines including spermidine and spermine) on the stability of various DNA oligonucleotides in solution were studied. These synthetic DNA molecules contained sequences that mimic various cellular DNA structures, such as duplexes, bulged loops, hairpins and/or mismatched base pairs. Melting temperature curves obtained from the ultraviolet spectroscopic experiments indicated that the effectiveness of the stabilization of cations on the duplex formation follows the order of spermine > spermidine > Mg2+ > Na+ > Tris-HCl buffer alone at pH 7.3. Circular dichroism spectra showed that salts and polyamines did not change the secondary structures of those DNA molecules under study. Surface plasmon resonance (SPR) observations suggested that the rates of duplex formation are independent of the kind of cations used or the structure of the duplexes. However, the rate constants of DNA duplex dissociation decrease in the same order when those cations are involved. The enhancement of the duplex stability by polyamines, especially spermine, can compensate for the instability caused by abnormal structures (e.g. bulged loops, hairpins or mismatches). The effects can be so great as to make the abnormal DNAs as stable as the perfect duplex, both kinetically and thermodynamically. Our results may suggest that the interconversion of various DNA structures can be accomplished readily in the presence of polyamine. This may be relevant in understanding the role of DNA polymorphism in cells.