A bottom-up approach towards a bacterial consortium for the biotechnological conversion of chitin to L-lysine

Chitin is an abundant waste product from shrimp and mushroom industries and as such, an appropriate secondary feedstock for biotechnological processes. However, chitin is a crystalline substrate embedded in complex biological matrices, and, therefore, difficult to utilize, requiring an equally complex chitinolytic machinery. Following a bottom-up approach, we here describe the step-wise development of a mutualistic, non-competitive consortium in which a lysine-auxotrophic Escherichia coli substrate converter cleaves the chitin monomer N-acetylglucosamine (GlcNAc) into glucosamine (GlcN) and acetate, but uses only acetate while leaving GlcN for growth of the lysine-secreting Corynebacterium glutamicum producer strain. We first engineered the substrate converter strain for growth on acetate but not GlcN, and the producer strain for growth on GlcN but not acetate. Growth of the two strains in co-culture in the presence of a mixture of GlcN and acetate was stabilized through lysine cross-feeding. Addition of recombinant chitinase to cleave chitin into GlcNAc₂, chitin deacetylase to convert GlcNAc₂ into GlcN₂ and acetate, and glucosaminidase to cleave GlcN₂ into GlcN supported growth of the two strains in co-culture in the presence of colloidal chitin as sole carbon source. Substrate converter strains secreting a chitinase or a β-1,4-glucosaminidase degraded chitin to GlcNAc₂ or GlcN₂ to GlcN, respectively, but required glucose for growth. In contrast, by cleaving GlcNAc into GlcN and acetate, a chitin deacetylase-expressing substrate converter enabled growth of the producer strain in co-culture with GlcNAc as sole carbon source, providing proof-of-principle for a fully integrated co-culture for the biotechnological utilization of chitin.

Synthetic Escherichia coli-Corynebacterium glutamicum consortia for l-lysine production from starch and sucrose

In the biorefinery concept renewable feedstocks are converted to a multitude of value-added compounds irrespective of seasonal or other variations of the complex biomass substrates. Conceptionally, this can be realized by specialized single microbial strains or by co-culturing various strain combinations. In the latter approach strains for substrate conversion and for product formation can be combined. This study addressed the construction of binary microbial consortia based on starch- and sucrose-based production of l-lysine and derived value-added compounds. A commensalism-based synthetic consortium for l-lysine production from sucrose was developed combining an l-lysine auxotrophic, naturally sucrose-negative E. coli strain with a C. glutamicum strain able to produce l-lysine that secretes fructose when grown with sucrose due to deletion of the fructose importer gene ptsF. Mutualistic synthetic consortia with an l-lysine auxotrophic, α-amylase secreting E. coli strain and naturally amylase-negative C. glutamicum strains was implemented for production of valuable fine chemicals from starch.

A complex iron-calcium cofactor catalyzing phosphotransfer chemistry

Alkaline phosphatases play a crucial role in phosphate acquisition by microorganisms. To expand our understanding of catalysis by this class of enzymes, we have determined the structure of the widely occurring microbial alkaline phosphatase PhoX. The enzyme contains a complex active-site cofactor comprising two antiferromagnetically coupled ferric iron ions (Fe(3+)), three calcium ions (Ca(2+)), and an oxo group bridging three of the metal ions. Notably, the main part of the cofactor resembles synthetic oxide-centered triangular metal complexes. Structures of PhoX-ligand complexes reveal how the active-site metal ions bind substrate and implicate the cofactor oxo group in the catalytic mechanism. The presence of iron in PhoX raises the possibility that iron bioavailability limits microbial phosphate acquisition.

The targeting, docking and anti-proteolysis functions of the secretin chaperone PulS

The Klebsiella oxytoca lipoprotein PulS might function as either or both a pilot and a docking factor in the outer membrane targeting and assembly of the Type II secretion system secretin PulD. In the piloting model, PulS binds to PulD monomers and targets them to the outer membrane via the lipoprotein sorting pathway components LolA and LolB. In this model, PulS also protects the PulD monomers from proteolysis during transit through the periplasm. In the docking model, PulS is targeted alone to the outer membrane, where it acts as a receptor for PulD monomers, allowing them to accumulate and assemble specifically in this membrane. PulS was shown to dissociate from and/or re-associate freely with PulD multimers in zwitterionic detergent, making it difficult to determine whether PulS remains associated with PulD dodecamers in the outer membrane by co-purification. However, PulD protomers in the dodecamer were shown to be stable in the absence of PulS, indicating that PulS is only required to protect the protease-susceptible monomer. DegP was identified as one of the proteases that could contribute to PulD degradation in the absence of PulS. Studies on the in vitro assembly and targeting of PulD into Escherichia coli membrane vesicles demonstrated its strong preference to insert into the inner membrane, as is the case in vivo in the absence of PulS. However, PulD could be targeted to outer membrane fragments in vitro if they were preloaded with PulS, indicating the technical feasibility of the docking model. We conclude that both modes of action might contribute to efficient outer membrane targeting of PulD in vivo, although the piloting function is likely to predominate.

Molecular dissection of TatC defines critical regions essential for protein transport and a TatB-TatC contact site

The twin arginine transport (Tat) system transports folded proteins across the prokaryotic cytoplasmic membrane and the plant thylakoid membrane. TatC is the largest and most conserved component of the Tat machinery. It forms a multisubunit complex with TatB and binds the signal peptides of Tat substrates. Here we have taken a random mutagenesis approach to identify substitutions in Escherichia coli TatC that inactivate protein transport. We identify 32 individual amino acid substitutions that abolish or severely compromise TatC activity. The majority of the inactivating substitutions fall within the first two periplasmic loops of TatC. These regions are predicted to have conserved secondary structure and results of extensive amino acid insertion and deletion mutagenesis are consistent with these conserved elements being essential for TatC function. Three inactivating substitutions were identified in the fifth transmembrane helix of TatC. The inactive M205R variant could be suppressed by mutations affecting amino acids in the transmembrane helix of TatB. A physical interaction between TatC helix 5 and the TatB transmembrane helix was confirmed by the formation of a site-specific disulphide bond between TatC M205C and TatB L9C variants. This is the first molecular contact site mapped to single amino acid level between these two proteins.

Processing by rhomboid protease is required for Providencia stuartii TatA to interact with TatC and to form functional homo-oligomeric complexes

The twin arginine transport (Tat) system transports folded proteins across the prokaryotic cytoplasmic membrane and the plant thylakoid membrane. In Escherichia coli three membrane proteins, TatA, TatB and TatC, are essential components of the machinery. TatA from Providencia stuartii is homologous to E. coli TatA but is synthesized as an inactive pre-protein with an N-terminal extension of eight amino acids. Removal of this extension by the rhomboid protease AarA is required to activate P. stuartii TatA. Here we show that P. stuartii TatA can functionally substitute for E. coli TatA provided that the E. coli homologue of AarA, GlpG, is present. The oligomerization state of the P. stuartii TatA pro-protein was compared with that of the proteolytically activated protein and with E. coli TatA. The pro-protein still formed small homo-oligomers but cannot form large TatBC-dependent assemblies. In the absence of TatB, E. coli TatA or the processed form of P. stuartii TatA form a complex with TatC. However, this complex is not observed with the pro-form of P. stuartii TatA. Taken together our results suggest that the P. stuartii TatA pro-protein is inactive because it is unable to interact with TatC and cannot form the large TatA complexes required for transport.

Thiosulfate reduction in Salmonella enterica is driven by the proton motive force

Thiosulfate respiration in Salmonella enterica serovar Typhimurium is catalyzed by the membrane-bound enzyme thiosulfate reductase. Experiments with quinone biosynthesis mutants show that menaquinol is the sole electron donor to thiosulfate reductase. However, the reduction of thiosulfate by menaquinol is highly endergonic under standard conditions (ΔE°' = -328 mV). Thiosulfate reductase activity was found to depend on the proton motive force (PMF) across the cytoplasmic membrane. A structural model for thiosulfate reductase suggests that the PMF drives endergonic electron flow within the enzyme by a reverse loop mechanism. Thiosulfate reductase was able to catalyze the combined oxidation of sulfide and sulfite to thiosulfate in a reverse of the physiological reaction. In contrast to the forward reaction the exergonic thiosulfate-forming reaction was PMF independent. Electron transfer from formate to thiosulfate in whole cells occurs predominantly by intraspecies hydrogen transfer.

The superoxide dismutase SodA is targeted to the periplasm in a SecA-dependent manner by a novel mechanism

The manganese/iron-type superoxide dismutase (SodA) of Rhizobium leguminosarum bv. viciae 3841 is exported to the periplasm of R. l. bv. viciae and Escherichia coli. However, it does not possess a hydrophobic cleaved N-terminal signal peptide typically present in soluble proteins exported by the Sec-dependent (Sec) pathway or the twin-arginine translocation (TAT) pathway. A tatC mutant of R. l. bv. viciae exported SodA to the periplasm, ruling out export of SodA as a complex with a TAT substrate as a chaperone. The export of SodA was unaffected in a secB mutant of E. coli, but its export from R. l. bv. viciae was inhibited by azide, an inhibitor of SecA ATPase activity. A temperature-sensitive secA mutant of E. coli was strongly reduced for SodA export. The 10 N-terminal amino acid residues of SodA were sufficient to target the reporter protein alkaline phosphatase to the periplasm. Our results demonstrate the export of a protein lacking a classical signal peptide to the periplasm by a SecA-dependent, but SecB-independent targeting mechanism. Export of the R. l. bv. viciae SodA to the periplasm was not limited to the genus Rhizobium, but was also observed in other proteobacteria.

Artificial binding proteins (Affitins) as probes for conformational changes in secretin PulD

The DNA-binding protein Sac7d was previously modified to bind with high affinity to the N domain of the outer membrane secretin PulD from the bacterium Klebsiella oxytoca. Here, we show that binding of the Sac7d derivatives (affitins) to PulD is sensitive to conformational changes caused by denaturant and by the zwitterionic detergent Zwittergent 3-14 routinely used to extract secretins from outer membranes. This sensitivity to the conformational state of PulD allowed us to use the affitins as probes for the native structure of PulD and to devise protocols for examining in vitro synthesized protein in nonionic detergent and for the affinity purification of native PulD using affitins as ligands. When fused to periplasmic PhoA, three affitins inhibited PulD multimerization in vivo and caused loss of function. In two cases, this was likely to be due to dimerization of the affitin by the bound PhoA, as the effect was absent when the affitins were fused to monomeric MalE. In the third case, the MalE and PhoA moieties probably interfered sterically with PulD protomer interactions and, thereby, inhibited multimerization. None of the affitins tested interacted with PulD at sites of protomer interaction or blocked the secretin channel through which exoproteins cross the outer membrane in the Type II secretion pathway of which PulD is a key component.

Glucomannan-mediated attachment of Rhizobium leguminosarum to pea root hairs is required for competitive nodule infection

The Rhizobium leguminosarum biovar viciae genome contains several genes predicted to determine surface polysaccharides. Mutants predicted to affect the initial steps of polysaccharide synthesis were identified and characterized. In addition to the known cellulose (cel) and acidic exopolysaccharide (EPS) (pss) genes, we mutated three other loci; one of these loci (gmsA) determines glucomannan synthesis and one (gelA) determines a gel-forming polysaccharide, but the role of the other locus (an exoY-like gene) was not identified. Mutants were tested for attachment and biofilm formation in vitro and on root hairs; the mutant lacking the EPS was defective for both of these characteristics, but mutation of gelA or the exoY-like gene had no effect on either type of attachment. The cellulose (celA) mutant attached and formed normal biofilms in vitro, but it did not form a biofilm on root hairs, although attachment did occur. The cellulose-dependent biofilm on root hairs appears not to be critical for nodulation, because the celA mutant competed with the wild-type for nodule infection. The glucomannan (gmsA) mutant attached and formed normal biofilms in vitro, but it was defective for attachment and biofilm formation on root hairs. Although this mutant formed nodules on peas, it was very strongly outcompeted by the wild type in mixed inoculations, showing that glucomannan is critical for competitive nodulation. The polysaccharide synthesis genes around gmsA are highly conserved among other rhizobia and agrobacteria but are absent from closely related bacteria (such as Brucella spp.) that are not normally plant associated, suggesting that these genes may play a wide role in bacterium-plant interactions.

Physiological conditions conducive to high cyanophycin content in biomass of Acinetobacter calcoaceticus strain ADP1

The effects of the inorganic medium components, the initial pH, the incubation temperature, the oxygen supply, the carbon-to-nitrogen ratio, and chloramphenicol on the synthesis of cyanophycin (CGP) by Acinetobacter calcoaceticus strain ADP1 were studied in a mineral salts medium containing sodium glutamate and ammonium sulfate as carbon and nitrogen sources, respectively. Variation of all these factors resulted in maximum CGP contents of only about 3.5% (wt/wt) of the cell dry matter (CDM), and phosphate depletion triggered CGP accumulation most substantially. However, addition of arginine to the medium as the sole carbon source for growth promoted CGP accumulation most strikingly. This effect was systematically studied, and an optimized phosphate-limited medium containing 75 mM arginine and 10 mM ammonium sulfate yielded a CGP content of 41.4% (wt/wt) of the CDM at 30 degrees C. The CGP content of the cells was further increased to 46.0% (wt/wt) of the CDM by adding 2.5 microg of chloramphenicol per ml of medium in the accumulation phase. These contents are by far the highest CGP contents of bacterial cells ever reported. CGP was easily isolated from the cells by using an acid extraction method, and this CGP contained about equimolar amounts of aspartic acid and arginine and no detectable lysine; the molecular masses ranged from 21 to 29 kDa, and the average molecular mass was about 25 kDa. Transmission electron micrographs of thin sections of cells revealed large CGP granules that frequently had an irregular shape with protuberances at the surface and often severely deformed the cells. A cphI::OmegaKm mutant of strain ADP1 with a disrupted putative cyanophycinase gene accumulated significantly less CGP than the wild type accumulated, although the cells expressed cyanophycin synthetase at about the same high level. It is possible that the intact CphI protein is involved in the release of CGP primer molecules from initially synthesized CGP. The resulting lower concentration of primer molecules could explain the observed low rate of accumulation at similar specific activities.

Partial purification and characterization of a non-cyanobacterial cyanophycin synthetase from Acinetobacter calcoaceticus strain ADP1 with regard to substrate specificity, substrate affinity and binding to cyanophycin

This study reports, for the first time, purification and biochemical characterization of a cyanophycin synthetase from a non-cyanobacterial strain. Cyanophycin synthetase of Acinetobacter calcoaceticus strain ADP1 was purified 69-fold from recombinant Escherichia coli by two chromatographic steps and one novel affinity step utilizing the Mg(2+)-dependent binding of the enzyme to cyanophycin. Unlike cyanobacterial cyanophycin synthetases characterized so far, the purified enzyme from A. calcoaceticus strain ADP1 did not accept lysine as an alternative substrate to arginine. The apparent K(m)-values for arginine (47 microM) and aspartic acid (240 microM) were similar to those of known cyanophycin synthetases from cyanobacteria, but this enzyme had a slightly higher affinity for aspartic acid. In addition, the two different ATP-binding sites of the enzyme were characterized independently of each other with respect to K(m) values for ATP. The ATP-binding site responsible for the addition of arginine was found to have a much higher affinity for ATP (38 microM) than that responsible for the addition of aspartate (210 mM). Furthermore, the binding of the enzyme to the two possible forms of cyanophycin granule polypeptide (CGP), CGP-Asp and CGP-Arg, was studied. While both forms bound around 30-40 % of the enzyme activity present under the assay conditions, binding was Mg(2+)-dependent in the case of CGP-Asp. Two-dimensional gel electrophoresis revealed that both forms of cyanophycin were equally abundant in cyanophycin-accumulating cells of A. calcoaceticus ADP1.

Evaluation of non-cyanobacterial genome sequences for occurrence of genes encoding proteins homologous to cyanophycin synthetase and cloning of an active cyanophycin synthetase from Acinetobacter sp. strain DSM 587

All publicly accessible microbial genome databases were searched for the occurrence of genes encoding proteins homologous to the cyanophycin synthetase (CphA) of Synechocystis sp. strain PCC 6803 in order to reveal the capability of microorganisms not belonging to the cyanobacteria to synthesize cyanophycin. Among 65 genome sequences, genes homologous to cphA were found in Acinetobacter sp. strain ADP1 (encoding a protein homologous to CphA with 40% amino acid identity), Bordetella bronchiseptica strain RB50 (39%), Bordetella pertussis strain Tohama I (39%), Bordetella parapertussis strain 12822 (39%), Clostridium botulinum strain ATCC 3502 (39%), Desulfitobacterium hafniense strain DCB-2 (38%) and Nitrosomonas europaea strain ATCC 25978 (37%). The gene homologous to cphA from Acinetobacter sp. strain DSM 587 was amplified by PCR, ligated to the vector pBluescript SK(-) downstream of the lac promoter and introduced into Escherichia coli. The recombinant strain of E. coli expressed CphA activity at up to 1.2 U/mg protein and accumulated cyanophycin to up to 7.5% of the cellular dry matter, indicating that CphA of Acinetobacter sp. strain DSM 587 is functionally active. In Acinetobacter sp. strain DSM 587 itself, cyanophycin accumulated to up to 1.4% of the total protein under phosphate-limited conditions, and cyanophycin synthetase activity was detected, which indicated the function of cyanophycin as a storage compound in this strain.