Temperature calibration under ultrafast MAS conditions

Mechanochemical Transformations of Pharmaceutical Cocrystals: Polymorphs and Coformer Exchange

Transformations of solid samples under solvent-free or minimal solvent conditions set the future trend and define a modern strategy for the production of new materials. Of the various technologies tested in recent years, the mechanochemical approach seems to be the most promising for economic and ecological reasons. The aim of this review article is to present the current state of art in solid state research on binary systems, which have found numerous applications in the pharmaceutical and materials science industries. This article is divided into three sections. In the first part, we describe the new equipment improvements, which include the innovative application of thermo-mechanochemistry, sono-mechanochemistry, photo-mechanochemistry, electro-mechanochemistry, as well as resonant acoustic mixing (RAM), and transformation under high-speed sample spinning ("SpeedMixing"). A brief description of techniques dedicated to ex-situ and in-situ studies of progress and the mechanism of solid matter transformation (PXRD, FTIR, Raman and NMR spectroscopy) is presented. In the second section, we discuss the problem of cocrystal polymorphism highlighting the issue related with correlation between mechanochemical parameters (time, temperature, energy, molar ratio, solvent used as a liquid assistant, surface energy, crystal size, crystal shape) and preference for the formation of requested polymorph. The last part is devoted to the description of the processes of coformer exchange in binary systems forced by mechanical and/or thermal stimuli. The influence of the thermodynamic factor on the selection of the best-suited partner for the formation of a two-component stable structure is presented.

Sustainable Composite Materials Based on Carnauba Wax and Montmorillonite Nanoclay for Energy Storage

Sustainable composite materials, including carnauba wax, can store energy in the form of latent heat, and containing the wax may allow form-stable melting and crystallization cycles to be performed. Here, it is shown that carnauba wax in the molten state and the abundant nanoclay montmorillonite form stable composites with mass ratios of 50-70% (w/w). Transmission electron microscopy analysis reveals the inhomogeneous distribution of the nanoclay in the wax matrix. Analyses with infrared and multinuclear solid-state nuclear magnetic resonance (NMR) spectroscopy prove the chemical inertness of the composite materials during preparation. No new phases are formed according to studies with powder X-ray diffraction. The addition of the nanoclay increases the thermal conductivity and prevents the leakage of the phase change material, as well as reducing the time intervals of the cycle of accumulation and the return of heat. The latent heat increases in the row 69.5 ± 3.7 J/g, 95.0 ± 2.5 J/g, and 107.9 ± 1.7 J/g for the composite materials containing resp. 50%, 60% and 70% carnauba wax. Analysis of temperature-dependent 13C cross-polarization solid-state NMR spectra reveal the enhanced amorphization and altered molecular dynamics of the carnauba wax constituents in the composite materials. The amorphization also defines changes in the thermal transport mechanism in the composites compared to pure wax at elevated temperatures.

A New Look at the Mechanism of Cocrystal Formation and Coformers Exchange in Processes Forced by Mechanical and/or Thermal Stimuli - ex situ and in situ Studies of Low-Melting Eutectic Mixtures

Three different devices: ball mill, hot stage melting, and magic angle spinning (MAS) NMR rotor were used for the preparation of ethenzamide (ET) cocrystals with glutaric acid (GLU), ethylmalonic acid (EMA) and maleic acid (MAL) as coformers. In each case, well-defined binary systems (ET:EMA, ET:GLU, ET:MAL) were obtained. The common features of the two solvent free methods of cocrystal formation (grinding, melting) are presented on the basis of arguments obtained by solid state NMR spectroscopy. Thermal analysis (Differential Scanning Calorimetry) proved that the eutectic phase arises over a wide range of molar ratios of components for each of the binary systems. NMR techniques, supported by theoretical calculations, allowed to provide details about the pathway of the reaction mechanism with atomic accuracy. It was found that the formation of ET cocrystals is a complex process that requires five steps. Each step has been recognized and described. Variable temperature 1D and 2D MAS NMR experiments allowed to track physicochemical processes taking place in a molten state. Moreover, it was found that in a multicomponent mixture consisting of all four components, ET, EMA, GLU, and MAL, ET in the molten phase behaves as a specific selector choosing only one partner to form binary cocrystals according to energy preferences. The process of exchange of coformers in binary systems during grinding, melting, and NMR measurements is described. The stabilization energies (Estab ) and molecular electrostatic potential (MEP) maps computed for the cocrystals under discussion and their individual components rationalize the selection rules and explain the relationships between individual species.

RAFT Polymerisation and Hypercrosslinking Improve Crosslink Homogeneity and Surface Area of Styrene Based PolyHIPEs

The influence of a polymerisation mechanism (reversible addition-fragmentation chain transfer; RAFT vs. free radical polymerisation; FRP) on the porous structure of highly porous poly(styrene-co-divinylbenzene) polymers was investigated. The highly porous polymers were synthesised via high internal phase emulsion templating (polymerizing the continuous phase of a high internal phase emulsion), utilising either FRP or RAFT processes. Furthermore, residual vinyl groups in the polymer chains were used for the subsequent crosslinking (hypercrosslinking) applying di-tert-butyl peroxide as the source of radicals. A significant difference in the specific surface area of polymers prepared by FRP (between 20 and 35 m²/g) and samples prepared by RAFT polymerisation (between 60 and 150 m²/g) was found. Based on the results from gas adsorption and solid state NMR, it could be concluded that the RAFT polymerisation affects the homogeneous distribution of the crosslinks in the highly crosslinked styrene-co-divinylbenzene polymer network. During the initial crosslinking, RAFT polymerisation leads to the increase in mesopores with diameters between 2 and 20 nm, resulting in good accessibility of polymer chains during the hypercrosslinking reaction, which is reflected in increased microporosity. The fraction of micropores created during the hypercrosslinking of polymers prepared via RAFT is around 10% of the total pore volume, which is up to 10 times more than for polymers prepared by FRP. Specific surface area, mesopore surface area, and total pore volume after hypercrosslinking reach almost the same values, regardless of the initial crosslinking. The degree of hypercrosslinking was confirmed by determination of the remaining double bonds by solid-state NMR analysis.

Processing Gray Selenium in Phosphonium-Based Ionic Liquids

The dissolution of gray selenium in tetraalkylphosphonium acetate ionic liquids was investigated by UV-vis, NMR, and Raman spectroscopy as well as quantum chemical calculations and electrochemical methods. Acetate anions and tetraalkylphosphonium cations facilitate the formation and stabilization of oligoselenides Se_n^2- and cationic Se species in the ionic liquid phase. Chemical exchange of selenium atoms was demonstrated by variable-temperature ⁷⁷Se NMR experiments. Additionally, uncharged cycloselenium molecules exist at high selenium concentrations. Upon dilution with ethanol, amorphous red selenium precipitates from the solution. Moreover, crystalline Se_1-xTe_x solid solutions precipitate when elemental tellurium is added to the mixture as confirmed by powder X-ray diffraction and Raman spectroscopy.

Surface Interactions and Nanoconfinement of Methane and Methane plus CO2 Revealed by High-Pressure Magic Angle Spinning NMR Spectroscopy and Molecular Dynamics

This study explores the fundamental, molecular- to microscopic-level behavior of methane gas confined into nanoporous silica proxies with different pore diameters and surface-to-volume (S/V) ratios. Surfaces and pore walls of nanoporous silica matrices are decorated with hydroxyl (-OH) groups, resembling natural heterogeneity. High-pressure MAS NMR was utilized to characterize the interactions between methane and the engineered nanoporous silica proxies under various temperature and pressure regimes. There was a change in the chemical shift position of confined methane slightly in the mixtures with nanoporous silica up to 393 K, as shown by high-pressure ¹³C-NMR. The ¹³C-NMR chemical shift of methane was changed by pressure, explained by the densification of methane inside the nanoporous silica materials. The influence of pore diameter and S/V of the nanoporous silica materials on the behaviors and dynamics of methane were studied. The presence of CO₂ in mixtures of silica and methane needs analysis with caution because CO₂ in a supercritical state and gaseous CO₂ change the original structure of nanoporous silica and change surface area and pore volume. According to simulation, the picosecond scale dynamics of methane confined in larger pores of amorphous silica is faster. In the 4 nm pore, the diffusivity obtained from MD simulations in the pore with a higher S/V ratio is slower due to the trapping of methane molecules in adsorbed layers close to the corrugated pore surface. In contrast, relaxation measured with NMR for smaller pores (higher S/V) exhibits larger T₁, indicating slower relaxation.

Anisotropy, segmental dynamics and polymorphism of crystalline biogenic carboxylic acids

Carboxylic acids of the Krebs cycle possess invaluable biochemical significance. Still, there are severe gaps in the availability of thermodynamic and crystallographic data, as well as ambiguities prevailing in the literature on the thermodynamic characterization and polymorph ranking. Providing an unambiguous description of the structure, thermodynamics and polymorphism of their neat crystalline phases requires a complex multidisciplinary approach. This work presents results of an extensive investigation of the structural anisotropy of the thermal expansion and local dynamics within these crystals, obtained from a beneficial cooperation of NMR crystallography and ab initio calculations of non-covalent interactions. The observed structural anisotropy and spin-lattice relaxation times are traced to large spatial variations in the strength of molecular interactions in the crystal lattice, especially in the orientation of the hydrogen bonds. A completely resolved crystal structure for oxaloacetic acid is reported for the first time. Thanks to multi-instrumental calorimetric effort, this work clarifies phase behavior, determines third-law entropies of the crystals, and states definitive polymorph ranking for succinic and fumaric acids. These thermodynamic observations are then interpreted in terms of first-principles quasi-harmonic calculations of cohesive properties. A sophisticated model capturing electronic, thermal, and configurational-entropic effects on the crystal structure approaches captures the subtle Gibbs energy differences governing polymorph ranking for succinic and fumaric acids, representing another success story of computational chemistry.

Enantiotropy of Simvastatin as a Result of Weakened Interactions in the Crystal Lattice: Entropy-Driven Double Transitions and the Transient Modulated Phase as Seen by Solid-State NMR Spectroscopy

In crystalline molecular solids, in the absence of strong intermolecular interactions, entropy-driven processes play a key role in the formation of dynamically modulated transient phases. Specifically, in crystalline simvastatin, the observed fully reversible enantiotropic behavior is associated with multiple order–disorder transitions: upon cooling, the dynamically disordered high-temperature polymorphic Form I is transformed to the completely ordered low-temperature polymorphic Form III via the intermediate (transient) modulated phase II. This behavior is associated with a significant reduction in the kinetic energy of the rotating and flipping ester substituents, as well as a decrease in structural ordering into two distinct positions. In transient phase II, the conventional three-dimensional structure is modulated by periodic distortions caused by cooperative conformation exchange of the ester substituent between the two states, which is enabled by weakened hydrogen bonding. Based on solid-state NMR data analysis, the mechanism of the enantiotropic phase transition and the presence of the transient modulated phase are documented.

Dipolar dephasing for structure determination in a paramagnetic environment

We demonstrate the efficacy of the REDOR-type sequences in determining dipolar coupling strength in a paramagnetic environment. Utilizing paramagnetic effects of enhanced relaxation rates and rapid electronic fluctuations in Cu(II)-(DL-Ala)₂.H₂O, the dipolar coupling for the methyl C-H that is 4.20 ​Å (methyl carbon) away from the Cu²⁺ ion, was estimated to be 8.8 ​± ​0.6 ​kHz. This coupling is scaled by a factor of ~0.3 in comparison to the rigid limit value of ~32 ​kHz, in line with partial averaging of the dipolar interaction by rotational motion of the methyl group. Limited variation in the scaling factor of the dipolar coupling strength at different temperatures is observed. The C-H internuclear distance derived from the size of the dipolar coupling is similar to that observed in the crystal structure. The errors in the dipolar coupling strength observed in the REDOR-type experiments are similar to those reported for diamagnetic systems. Increase in resolution due to the Fermi contact shifts, coupled with MAS frequencies of 30-35 ​kHz allowed to estimate the hyperfine coupling strengths for protons and carbons from the temperature dependence of the chemical shift and obtain a high resolution ¹H-¹H spin diffusion spectrum. This study shows the utility of REDOR-type sequences in obtaining reliable structural and dynamical information from a paramagnetic complex. We believe that this can help in studying the active site of paramagnetic metalloproteins at high resolution.

Influence of the ultrasonic-assisted synthesis on Al distribution in a MOR zeolite: from gel to resulting material

Two Al-rich mordenite samples were prepared by the same synthesis procedure except for the activation of the gel for which classical stirring and ultrasonic pretreatment was used.

The Monetite Structure Probed by Advanced Solid-State NMR Experimentation at Fast Magic-Angle Spinning

We present a solid-state nuclear magnetic resonance (NMR) spectroscopy study of the local 31P and 1H environments in monetite [CaHPO4; dicalcium phosphate anhydrous (DCPA)], as well as their relative spatial proximities. Each of the three 1H NMR peaks was unambiguously assigned to its respective crystallographically unique H site of monetite, while their pairwise spatial proximities were probed by homonuclear 1H–1H double quantum–single quantum NMR experimentation under fast magic-angle spinning (MAS) of 66 kHz. We also examined the relative 1H–31P proximities among the inequivalent {P1, P2} and {H1, H2, H3} sites in monetite; the corresponding shortest internuclear 1H–31P distances accorded well with those of a previous neutron diffraction study. The NMR results from the monetite phase were also contrasted with those observed from the monetite component present in a pyrophosphate-bearing calcium phosphate cement, demonstrating that while the latter represents a disordered form of monetite, it shares all essential local features of the monetite structure.

Solid state NMR at very high temperatures

Whereas high resolution NMR at temperatures up to 550 K can be routinely performed selecting from a variety of commercially available NMR hardware, experiments in the high temperature regime, defined here as T > 550 K, have been restricted to just a few specialized laboratories. In this contribution we present important developments of high temperature NMR over the last decades. Various methods to achieve high resolution high temperature NMR, including resistive heating, laser-assisted heating and inductive heating, are presented and their specific advantages and disadvantages discussed. The various ways of temperature monitoring including the use of chemical shift thermometers or T₁ thermometers are reviewed. In the last section, some typical application examples from the field of oxidic glasses and melts are given.

Study on Paramagnetic Interactions of (CH3NH3)2CoBr4 Hybrid Perovskites Based on Nuclear Magnetic Resonance (NMR) Relaxation Time

The thermal properties of organic-inorganic (CH3NH3)2CoBr4 crystals were investigated using differential scanning calorimetry and thermogravimetric analysis. The phase transition and partial decomposition temperatures were observed at 460 K and 572 K. Nuclear magnetic resonance (NMR) chemical shifts depend on the local field at the site of the resonating nucleus. In addition, temperature-dependent spin-lattice relaxation times (T1ρ) were measured using 1H and 13C magic angle spinning NMR to elucidate the paramagnetic interactions of the (CH3NH3)+ cations. The shortening of 1H and 13C T1ρ of the (CH3NH3)2CoBr4 crystals are due to the paramagnetic Co2+ effect. Moreover, the physical properties of (CH3NH3)2CoBr4 with paramagnetic ions and those of (CH3NH3)2CdBr4 without paramagnetic ions are reported and compared.

Formation of Oriented Polar Crystals in Bulk Poly(vinylidene fluoride)/High-Aspect-Ratio Organoclay Nanocomposites

We have investigated the formation of lamellar crystals of poly(vinylidene fluoride) (PVDF) in the presence of oriented clay particles with different aspect ratios (ARs) and surface properties. Hot-melt screw extrusion of PVDF with 5 wt % of montmorillonite (AR ≈ 12) or fluoromica (AR ≈ 27) resulted in formation of phase-separated blends. Replacing the clays with their organoclay derivatives, organomontmorillonite or organofluoromica, resulted in the corresponding intercalated nanocomposites. The organoclays induced formation of polar β- and γ-polymorphs of PVDF in contrast to the α-polymorph, which dominates in the pure PVDF and the PVDF/clay blends. Solid-state nuclear magnetic resonance revealed that the content of the α-phase in the nanocomposites was never higher than 7% of the total crystalline phase, whereas the β/γ mass ratio was close to 1:2, irrespective of the AR or crystallization conditions. X-ray diffraction showed that the oriented particles with a larger AR caused orientation of the polar lamellar crystals of PVDF. In the presence of the organofluoromica, PVDF formed a chevron-like lamellar nanostructure, where the polymer chains are extended along the extrusion direction, whereas the lamellar crystals were slanted from normal to the extrusion direction. Time-resolved X-ray diffraction experiments allowed the identification of the formation mechanism of the chevron-like nanostructure.

Determination of Long-Range Distances by Fast Magic-Angle-Spinning Radiofrequency-Driven 19F-19F Dipolar Recoupling NMR

Nanometer-range distances are important for restraining the three-dimensional structure and oligomeric assembly of proteins and other biological molecules. Solid-state NMR determination of protein structures typically utilizes ¹³C-¹³C and ¹³C-¹⁵N distance restraints, which can only be measured up to ∼7 Å because of the low gyromagnetic ratios of these nuclear spins. To extend the distance reach of NMR, one can harvest the power of ¹⁹F, whose large gyromagnetic ratio in principle allows distances up to 2 nm to be measured. However, ¹⁹F possesses large chemical shift anisotropies (CSAs) as well as large isotropic chemical shift dispersions, which pose challenges to dipolar coupling measurements. Here, we demonstrate ¹⁹F-¹⁹F distance measurements at high magnetic fields under fast magic-angle spinning (MAS) using radiofrequency-driven dipolar recoupling (RFDR). We show that ¹⁹F-¹⁹F cross-peaks for distances up to 1 nm can be readily observed in two-dimensional ¹⁹F-¹⁹F correlation spectra using less than 5 ms of RFDR mixing. This efficient ¹⁹F-¹⁹F dipolar recoupling is achieved using practically accessible MAS frequencies of 15-55 kHz, moderate ¹⁹F radio frequency field strengths, and no ¹H decoupling. Experiments and simulations show that the fastest polarization transfer for aromatic fluorines with the highest distance accuracy is achieved using either fast MAS (e.g., 60 kHz) with large pulse duty cycles (>50%) or slow MAS with strong ¹⁹F pulses. Fast MAS considerably reduces relaxation losses during the RFDR π-pulse train, making finite-pulse RFDR under fast-MAS the method of choice. Under intermediate MAS frequencies (25-40 kHz) and intermediate pulse duty cycles (15-30%), the ¹⁹F CSA tensor orientation has a quantifiable effect on the polarization transfer rate; thus, the RFDR buildup curves encode both distance and orientation information. At fast MAS, the impact of CSA orientation is minimized, allowing pure distance restraints to be extracted. We further investigate how relayed transfer and dipolar truncation in multifluorine environments affect polarization transfer. This fast-MAS ¹⁹F RFDR approach is complementary to ¹⁹F spin diffusion for distance measurements and will be the method of choice under high-field fast-MAS conditions that are increasingly important for protein structure determination by solid-state NMR.

NMR Crystallography of the Polymorphs of Metergoline

Two polymorphs of the drug compound metergoline (C25H29N3O2) were investigated in detail by solid-state NMR measurements. The results have been analysed by an advanced procedure, which uses experimental input together with the results of quantum chemical calculations that were performed for molecular crystals. In this way, it was possible to assign the total of 40 1H–13C correlation pairs in a highly complex system, namely, in the dynamically disordered polymorph with two independent molecules in the unit cell of a large volume of 4234 Å3. For the simpler polymorph, which exhibits only small-amplitude motions and has just one molecule in the unit cell with a volume of 529.0 Å3, the values of the principal elements of the 13C chemical shift tensors were measured. Additionally, for this polymorph, a set of crystal structure predictions were generated, and the {13C, 1H} isotropic and 13C anisotropic chemical shielding data were computed while using the gauge-including projector augmented-wave approach combined with the “revised Perdew-Burke-Ernzerhof“ exchange-correlation functional (GIPAW-RPBE). The experimental and theoretical results were combined in an application of the newly developed strategy to polymorph discrimination. This research thus opens up new routes towards more accurate characterization of the polymorphism of drug formulations.

Fast Magic-Angle-Spinning 19F Spin Exchange NMR for Determining Nanometer 19F-19F Distances in Proteins and Pharmaceutical Compounds

Internuclear distances measured using NMR provide crucial constraints of three-dimensional structures but are often restricted to about 5 Å due to the weakness of nuclear-spin dipolar couplings. For studying macromolecular assemblies in biology and materials science, distance constraints beyond 1 nm will be extremely valuable. Here we present an extensive and quantitative analysis of the feasibility of 19F spin exchange NMR for precise and robust measurements of interatomic distances up to 1.6 nm at a magnetic field of 14.1 T, under 20-40 kHz magic-angle spinning (MAS). The measured distances are comparable to those achievable from paramagnetic relaxation enhancement but have higher precision, which is better than ±1 Å for short distances and ±2 Å for long distances. For 19F spins with the same isotropic chemical shift but different anisotropic chemical shifts, intermediate MAS frequencies of 15-25 kHz without 1H irradiation accelerate spin exchange. For spectrally resolved 19F-19F spin exchange, 1H-19F dipolar recoupling significantly speeds up 19F-19F spin exchange. On the basis of data from five fluorinated synthetic, pharmaceutical, and biological compounds, we obtained two general curves for spin exchange between CF groups and between CF3 and CF groups. These curves allow 19F-19F distances to be extracted from the measured spin exchange rates after taking into account 19F chemical shifts. These results demonstrate the robustness of 19F spin exchange NMR for distance measurements in a wide range of biological and chemical systems.

Probing intermolecular interactions in a diethylcarbamazine citrate salt by fast MAS 1H solid-state NMR spectroscopy and GIPAW calculations

Fast magic-angle spinning (MAS) NMR is used to probe intermolecular interactions in a diethylcarbamazine salt, that is widely used as a treatment against adult worms of Wuchereria bancrofti which cause a common disease in tropical countries named filariasis. Specifically, a dihydrogen citrate salt that has improved thermal stability and solubility as compared to the free form is studied. One-dimensional ¹H, ¹³C and ¹⁵N and two-dimensional ¹H-¹³C and ¹⁴N-¹H heteronuclear correlation NMR experiments under moderate and fast MAS together with GIPAW (CASTEP) calculations enable the assignment of the ¹H, ¹³C and ¹⁴N/¹⁵N resonances. A two-dimensional ¹H-¹H double-quantum (DQ) -single-quantum (SQ) MAS spectrum recorded with BaBa recoupling at 60kHz MAS identifies specific proton-proton proximities associated with citrate-citrate and citrate-diethylcarbamazine intermolecular interactions.

Methylammonium lead chloride: A sensitive sample for an accurate NMR thermometer

A new solid-state nuclear magnetic resonance (NMR) thermometry sample is proposed. The ²⁰⁷Pb NMR chemical shift of a lead halide perovskite, methylammonium lead chloride (MAPbCl₃) is very sensitive to temperature, 0.905±0.010ppmK^-1. The response to temperature is linear over a wide temperature range, from its tetragonal to cubic phase transition at 178K to >410K, making it an ideal standard for temperature calibrations in this range. Because the ²⁰⁷Pb NMR lineshape for MAPbCl₃ appears symmetric, the sample is ideal for calibration of variable temperature NMR data acquired for spinning or non-spinning samples. A frequency-ratio method is proposed for referencing ²⁰⁷Pb chemical shifts, based on the ¹H and ¹³C frequencies of the methylammonium cation, which are used asan internal standard. Finally, this new NMR thermometer has been used to measure the degree of frictional heating asa function of spinning frequency for a series of MAS rotors ranging in outer diameter from 1.3 to 7.0mm. As expected, the largest diameter rotors are more susceptible to frictional heating, but lower diameter rotors are subjected to higher frictional heating temperatures as they are typically spun at much higher spinning frequencies.

Single-crystal X-ray diffraction and NMR crystallography of a 1:1 cocrystal of dithianon and pyrimethanil

A single-crystal X-ray diffraction structure of a 1:1 cocrystal of two fungicides, namely dithianon (DI) and pyrimethanil (PM), is reported [systematic name: 5,10-dioxo-5H,10H-naphtho[2,3-b][1,4]dithiine-2,3-dicarbonitrile-4,6-dimethyl-N-phenylpyrimidin-2-amine (1/1), C14H4N2O2S2·C12H13N2]. Following an NMR crystallography approach, experimental solid-state magic angle spinning (MAS) NMR spectra are presented together with GIPAW (gauge-including projector augmented wave) calculations of NMR chemical shieldings. Specifically, experimental 1H and 13C chemical shifts are determined from two-dimensional 1H-13C MAS NMR correlation spectra recorded with short and longer contact times so as to probe one-bond C-H connectivities and longer-range C...H proximities, whereas H...H proximities are identified in a 1H double-quantum (DQ) MAS NMR spectrum. The performing of separate GIPAW calculations for the full periodic crystal structure and for isolated molecules allows the determination of the change in chemical shift upon going from an isolated molecule to the full crystal structure. For the 1H NMR chemical shifts, changes of 3.6 and 2.0 ppm correspond to intermolecular N-H...O and C-H...O hydrogen bonding, while changes of -2.7 and -1.5 ppm are due to ring current effects associated with C-H...π interactions. Even though there is a close intermolecular S...O distance of 3.10 Å, it is of note that the molecule-to-crystal chemical shifts for the involved sulfur or oxygen nuclei are small.

Surface Interactions and Confinement of Methane: A High Pressure Magic Angle Spinning NMR and Computational Chemistry Study

Characterization and modeling of the molecular-level behavior of simple hydrocarbon gases, such as methane, in the presence of both nonporous and nanoporous mineral matrices allows for predictive understanding of important processes in engineered and natural systems. In this study, changes in local electromagnetic environments of the carbon atoms in methane under conditions of high pressure (up to 130 bar) and moderate temperature (up to 346 K) were observed with ¹³C magic-angle spinning (MAS) NMR spectroscopy while the methane gas was mixed with two model solid substrates: a fumed nonporous, 12 nm particle size silica and a mesoporous silica with 200 nm particle size and 4 nm average pore diameter. Examination of the interactions between methane and the silica systems over temperatures and pressures that include the supercritical regime was allowed by a novel high pressure MAS sample containment system, which provided high resolution spectra collected under in situ conditions. For pure methane, no significant thermal effects were found for the observed ¹³C chemical shifts at all pressures studied here (28.2, 32.6, 56.4, 65.1, 112.7, and 130.3 bar). However, the ¹³C chemical shifts of resonances arising from confined methane changed slightly with changes in temperature in mixtures with mesoporous silica. The chemical shift values of ¹³C nuclides in methane change measurably as a function of pressure both in the pure state and in mixtures with both silica matrices, with a more pronounced shift when meso-porous silica is present. Molecular-level simulations utilizing GCMC, MD, and DFT confirm qualitatively that the experimentally measured changes are attributed to interactions of methane with the hydroxylated silica surfaces as well as densification of methane within nanopores and on pore surfaces.

An efficient 2D 11B–11B solid-state NMR spectroscopy strategy for monitoring covalent self-assembly of boronic acid-derived compounds: the transformation and unique architecture of bortezomib molecules in the solid state

An efficient 2D ¹¹B–¹¹B ssNMR strategy for exploring the covalent assembly of boronic acid derivatives in the solid state is demonstrated.

Heating and temperature gradients of lipid bilayer samples induced by RF irradiation in MAS solid-state NMR experiments

The MAS solid-state NMR has been a powerful technique for studying membrane proteins within the native-like lipid bilayer environment. In general, RF irradiation in MAS NMR experiments can heat and potentially destroy expensive membrane protein samples. However, under practical MAS NMR experimental conditions, detailed characterization of RF heating effect of lipid bilayer samples is still lacking. Herein, using ¹ H chemical shift of water for temperature calibration, we systematically study the dependence of RF heating on hydration levels and salt concentrations of three lipids in MAS NMR experiments. Under practical ¹ H decoupling conditions used in biological MAS NMR experiments, three lipids show different dependence of RF heating on hydration levels as well as salt concentrations, which are closely associated with the properties of lipids. The maximum temperature elevation of about 10 °C is similar for the three lipids containing 200% hydration, which is much lower than that in static solid-state NMR experiments. The RF heating due to salt is observed to be less than that due to hydration, with a maximum temperature elevation of less than 4 °C in the hydrated samples containing 120 mmol l^-1 of salt. Upon RF irradiation, the temperature gradient across the sample is observed to be greatly increased up to 20 °C, as demonstrated by the remarkable broadening of ¹ H signal of water. Based on detailed characterization of RF heating effect, we demonstrate that RF heating and temperature gradient can be significantly reduced by decreasing the hydration levels of lipid bilayer samples from 200% to 30%. Copyright © 2016 John Wiley & Sons, Ltd.

Fluid flow dynamics in MAS systems

The turbine system and the radial bearing of a high performance magic angle spinning (MAS) probe with 1.3mm-rotor diameter has been analyzed for spinning rates up to 67kHz. We focused mainly on the fluid flow properties of the MAS system. Therefore, computational fluid dynamics (CFD) simulations and fluid measurements of the turbine and the radial bearings have been performed. CFD simulation and measurement results of the 1.3mm-MAS rotor system show relatively low efficiency (about 25%) compared to standard turbo machines outside the realm of MAS. However, in particular, MAS turbines are mainly optimized for speed and stability instead of efficiency. We have compared MAS systems for rotor diameter of 1.3-7mm converted to dimensionless values with classical turbomachinery systems showing that the operation parameters (rotor diameter, inlet mass flow, spinning rate) are in the favorable range. This dimensionless analysis also supports radial turbines for low speed MAS probes and diagonal turbines for high speed MAS probes. Consequently, a change from Pelton type MAS turbines to diagonal turbines might be worth considering for high speed applications. CFD simulations of the radial bearings have been compared with basic theoretical values proposing considerably smaller frictional loss values. The discrepancies might be due to the simple linear flow profile employed for the theoretical model. Frictional losses generated inside the radial bearings result in undesired heat-up of the rotor. The rotor surface temperature distribution computed by CFD simulations show a large temperature gradient over the rotor.

¹³C- and ¹H-detection under fast MAS for the study of poorly available proteins: application to sub-milligram quantities of a 7 trans-membrane protein

We demonstrate that (13)C-detected spectra recorded using fast (60 kHz) magic angle spinning on sub-milligram (<10 μmol) quantities of a protonated 7 trans-membrane helix protein (bacteriorhodopsin) in its native lipid environment are comparable in sensitivity and resolution to those recorded using 15-fold larger sample volumes with conventional solid state NMR methodology. We demonstrate the utility of proton-detected measurements which yield narrow (1)H linewidths under these conditions, and that no structural alterations are observed. We propose that these methods will prove useful to gain structural information on membrane proteins with poor availability, which can be studied in their native lipid environments.

A cross-polarization based rotating-frame separated-local-field NMR experiment under ultrafast MAS conditions

Rotating-frame separated-local-field solid-state NMR experiments measure highly resolved heteronuclear dipolar couplings which, in turn, provide valuable interatomic distances for structural and dynamic studies of molecules in the solid-state. Though many different rotating-frame SLF sequences have been put forth, recent advances in ultrafast MAS technology have considerably simplified pulse sequence requirements due to the suppression of proton-proton dipolar interactions. In this study we revisit a simple two-dimensional (1)H-(13)C dipolar coupling/chemical shift correlation experiment using (13)C detected cross-polarization with a variable contact time (CPVC) and systematically study the conditions for its optimal performance at 60 kHz MAS. In addition, we demonstrate the feasibility of a proton-detected version of the CPVC experiment. The theoretical analysis of the CPVC pulse sequence under different Hartmann-Hahn matching conditions confirms that it performs optimally under the ZQ (w1H-w1C=±wr) condition for polarization transfer. The limits of the cross polarization process are explored and precisely defined as a function of offset and Hartmann-Hahn mismatch via spin dynamics simulation and experiments on a powder sample of uniformly (13)C-labeled L-isoleucine. Our results show that the performance of the CPVC sequence and subsequent determination of (1)H-(13)C dipolar couplings are insensitive to (1)H/(13)C frequency offset frequency when high RF fields are used on both RF channels. Conversely, the CPVC sequence is quite sensitive to the Hartmann-Hahn mismatch, particularly for systems with weak heteronuclear dipolar couplings. We demonstrate the use of the CPVC based SLF experiment as a tool to identify different carbon groups, and hope to motivate the exploration of more sophisticated (1)H detected avenues for ultrafast MAS.

Solid-state nuclear magnetic resonance spectroscopy for membrane protein structure determination

Solid-state NMR (ssNMR) is a versatile technique that can provide high-resolution (sub-angstrom) structural data for integral membrane proteins embedded in native and model membrane environments. The methodologies for a priori structure determination have for the most part been developed using samples with crystalline and fibrous morphologies. However, the techniques are now being applied to large, polytopic membrane proteins including receptors, ion channels, and porins. ssNMR data may be used to annotate and refine existing structures in regions of the protein not fully resolved by crystallography (including ligand-binding sites and mobile solvent accessible loop regions). This review describes the spectroscopic experiments and data analysis methods (including assignment) used to generate high-resolution structural data for membrane proteins. We also consider the range of sample morphologies that are appropriate for study by this method.

Determination of sample temperature in unstable static fields by combining solid-state (79)Br and (13)C NMR

Monitoring the isotropic chemical shifts to calibrate the sample temperature presupposes a perfect stability of the static magnetic field. It can be difficult to satisfy this requirement in solid-state NMR measurements. This paper describes a simple way to recover the accurate temperature dependence of the (79)Br resonance after subtracting changes of resonance frequency due to variations of the static field, monitored by the (13)C resonance.

Magic angle spinning nuclear magnetic resonance spectroscopy of G protein-coupled receptors

G protein-coupled receptors (GPCRs) represent the largest family of membrane receptors and mediate a diversity of cellular processes. These receptors have a common seven-transmembrane helix structure, yet have evolved to respond to literally thousands of different ligands. In this chapter, we describe the use of magic angle spinning solid-state NMR spectroscopy for characterizing the structure and dynamics of GPCRs. Solid-state NMR spectroscopy is well suited for structural measurements in both detergent micelles and membrane bilayer environments. We first outline the methods for large-scale production of stable, functional receptors containing (13)C- and (15)N-labeled amino acids. The expression methods make use of eukaryotic HEK293S cell lines that produce correctly folded, fully functional receptors. We subsequently describe the basic methods used for magic angle spinning solid-state NMR measurements of chemical shifts and dipolar couplings, which reveal detailed information on GPCR structure and dynamics.

Heat management strategies for solid-state NMR of functional proteins

Modern solid-state NMR methods can acquire high-resolution protein spectra for structure determination. However, these methods use rapid sample spinning and intense decoupling fields that can heat and denature the protein being studied. Here we present a strategy to avoid destroying valuable samples. We advocate first creating a sacrificial sample, which contains unlabeled protein (or no protein) in buffer conditions similar to the intended sample. This sample is then doped with the chemical shift thermometer Sm2Sn2O7. We introduce a pulse scheme called TCUP (for Temperature Calibration Under Pulseload) that can characterize the heating of this sacrificial sample rapidly, under a variety of experimental conditions, and with high temporal resolution. Sample heating is discussed with respect to different instrumental variables such as spinning speed, decoupling strength and duration, and cooling gas flow rate. The effects of different sample preparation variables are also discussed, including ionic strength, the inclusion of cryoprotectants, and the physical state of the sample (i.e. liquid, solid, or slurry). Lastly, we discuss probe detuning as a measure of sample thawing that does not require retuning the probe or using chemical shift thermometer compounds. Use of detuning tests and chemical shift thermometers with representative sample conditions makes it possible to maximize the efficiency of the NMR experiment while retaining a functional sample.

Phosphorus-31 and vanadium-51 solid-state nuclear magnetic resonance spectroscopy of β-vanadyl phosphate — Effects of homo- and heteronuclear spin-spin, electrostatic, and paramagnetic interactions

Field-dependent 31P solid-state NMR studies demonstrate that the line shape in spectra of β-VOPO4 depends on 51V–31P direct and indirect spin-spin interactions (M2 (51V, 31P) = 101(23) × 106 rad2 s–2, 2Jiso (51V, 31P) = 48(5) Hz) and, to a lesser extent, on 31P chemical shift anisotropy (δiso = –10.4(2), Ω = δ11 – δ33 = 22(2) ppm) and 31P–31P interactions (M2 (31P, 31P) = 6.7(1) × 106 rad2 s–2). In contrast, homonuclear dipolar interactions play an important role for the field and spinning rate dependent 31P spin-lattice relaxation via paramagnetic impurities (T1 = 20–60 s). Vanadium-51 magic-angle spinning NMR spectra indicate a sizeable chemical shift anisotropy (δiso = –754(1), δ11 = –336(10), δ22 = –344(6), δ33 = –1581(8) ppm) and nuclear quadrupole interaction (χ = 1.5(1) MHz, η = 0.35(5)); the principal axis systems of both interactions are clearly not coincident, with an angle of 35(5)° between the greatest component of the electric field gradient tensor and δ33.

A general protocol for temperature calibration of MAS NMR probes at arbitrary spinning speeds

A protocol using (207)Pb NMR of solid lead nitrate was developed to determine the temperature of magic-angle spinning (MAS) NMR probes over a range of nominal set temperatures and spinning speeds. Using BioMAS and FastMAS probes with typical sample spinning rates of 8 and 35 kHz, respectively, empirical equations were devised to predict the respective sample temperatures. These procedures provide a straightforward recipe for temperature calibration of any MAS probe.

Erasing conformational limitations in N,N'-1,4-butanediyl-bis(6-hydroxy-hexanamide) crystallization from the superheated state of water

Aliphatic polyamides consist of regularly distributed amide moieties located in an aliphatic chain, off which the segment length can be varied. The crystallization and hence the eventual performance of the material can be tailored by changing the aliphatic lengths, and thus the hydrogen bonding density and the directional chemical positioning of the amide motifs. In this paper, N,N'-1,4-butanediyl-bis(6-hydroxy-hexanamide) crystallized either from the melt or from the superheated state of water is investigated. A comparison with N,N'-1,2-ethanediyl-1,2-bis(6-hydroxy-hexanamide) reveals the role of the hydrogen bonding density on the accommodation of water molecules in amide based crystals grown from the superheated state of water. However, wide-angle X-ray diffraction (WAXD), Fourier transform infrared (FTIR), and solid state 1H and 13C NMR spectroscopy reveal hydrogen bonding between the amide planes, while aliphatic polyamides and N,N'-1,2-diethyl-bis(6-hydroxy-hexanamide) feature hydrogen bonds that reside within the amide plane only. As a consequence, the role of N,N'-1,4-butanediyl-bis(6-hydroxy-hexanamide) crystals as a model system for polyamide 4Y polymers is questionable. However, the thermodynamic and structural behavior as function of temperature is determined by a balance between thermally introduced gauche conformers and hydrogen bonding efficiencies. These crystals enable a thorough investigation in the effect of superheated water on the crystallization of these uniquely hydrogen bonded molecules. Crystallization from the superheated state of water results in denser molecular packing and enhanced hydrogen bonding efficiencies. The induced spatial confinement hinders molecular motion upon heating, and thermodynamically more stable crystals are observed. Although the amide-hydroxyl hydrogen bonded crystals do not favor the accommodation of physically bound water molecules in the lattice, saturation of the amide motifs during crystallization erases conformational restrictions of the planar amide moieties that facilitates maximum hydrogen bonding efficiencies in the eventual lattice.

Measurement of sample temperatures under magic-angle spinning from the chemical shift and spin-lattice relaxation rate of 79Br in KBr powder

Accurate determination of sample temperatures in solid state nuclear magnetic resonance (NMR) with magic-angle spinning (MAS) can be problematic, particularly because frictional heating and heating by radio-frequency irradiation can make the internal sample temperature significantly different from the temperature outside the MAS rotor. This paper demonstrates the use of (79)Br chemical shifts and spin-lattice relaxation rates in KBr powder as temperature-dependent parameters for the determination of internal sample temperatures. Advantages of this method include high signal-to-noise, proximity of the (79)Br NMR frequency to that of (13)C, applicability from 20 K to 320 K or higher, and simultaneity with adjustment of the MAS axis direction. We show that spin-lattice relaxation in KBr is driven by a quadrupolar mechanism. We demonstrate a simple approach to including KBr powder in hydrated samples, such as biological membrane samples, hydrated amyloid fibrils, and hydrated microcrystalline proteins, that allows direct assessment of the effects of frictional and radio-frequency heating under experimentally relevant conditions.