Review: conformation and folding of novel beta-structural elements in viral fiber proteins: the triple beta-spiral and triple beta-helix

Adenovirus Fibers as Ultra-Stable Vehicles for Intracellular Nanoparticle and Protein Delivery

Protein-based carriers are promising vehicles for the intracellular delivery of therapeutics. In this study, we designed and studied adenovirus protein fiber constructs with potential applications as carriers for the delivery of protein and nanoparticle cargoes. We used as a basic structural framework the fibrous shaft segment of the adenovirus fiber protein comprising of residues 61–392, connected to the fibritin foldon trimerization motif at the C-terminal end. A fourteen-amino-acid biotinylation sequence was inserted immediately after the N-terminal, His-tagged end of the construct in order to enable the attachment of a biotin moiety in vivo. We report herein that this His-tag biotinylated construct folds into thermally and protease-stable fibrous nanorods that can be internalized into cells and are not cytotoxic. Moreover, they can bind to proteins and nanoparticles through the biotin–streptavidin interaction and mediate their delivery to cells. We demonstrate that streptavidin-conjugated gold nanoparticles can be transported into NIH3T3 fibroblast and HeLa cancer cell lines. Furthermore, two streptavidin-conjugated model proteins, alkaline phosphatase and horseradish peroxidase can be delivered into the cell cytoplasm in their enzymatically active form. This work is aimed at establishing the proof-of-principle for the rational engineering of diverse functionalities onto the initial protein structural framework and the use of adenovirus fiber-based proteins as nanorods for the delivery of nanoparticles and model proteins. These constructs could constitute a stepping stone for the development of multifunctional and modular fibrous nanorod platforms that can be tailored to applications at the sequence level.

Rapid Microscopic Detection of Bacillus anthracis by Fluorescent Receptor Binding Proteins of Bacteriophages

Bacillus anthracis, the etiological agent of anthrax disease, is typically diagnosed by immunological and molecular methods such as polymerase chain reaction (PCR). Alternatively, mass spectrometry techniques may aid in confirming the presence of the pathogen or its toxins. However, because of the close genetic relationship between B. anthracis and other members of the Bacillus cereus sensu lato group (such as Bacillus cereus or Bacillus thuringiensis) mis- or questionable identification occurs frequently. Also, bacteriophages such as phage gamma (which is highly specific for B. anthracis) have been in use for anthrax diagnostics for many decades. Here we employed host cell-specific receptor binding proteins (RBP) of (pro)-phages, also known as tail or head fibers, to develop a microscopy-based approach for the facile, rapid and unambiguous detection of B. anthracis cells. For this, the genes of (putative) RBP from Bacillus phages gamma, Wip1, AP50c and from lambdoid prophage 03 located on the chromosome of B. anthracis were selected. Respective phage genes were heterologously expressed in Escherichia coli and purified as fusions with fluorescent proteins. B. anthracis cells incubated with either of the reporter fusion proteins were successfully surface-labeled. Binding specificity was confirmed as RBP fusion proteins did not bind to most isolates of a panel of other B. cereus s.l. species or to more distantly related bacteria. Remarkably, RBP fusions detected encapsulated B. anthracis cells, thus RBP were able to penetrate the poly-γ-d-glutamate capsule of B. anthracis. From these results we anticipate this RBP-reporter assay may be useful for rapid confirmative identification of B. anthracis.

A Tailspike with Exopolysaccharide Depolymerase Activity from a New Providencia stuartii Phage Makes Multidrug-Resistant Bacteria Susceptible to Serum-Mediated Killing

Providencia stuartii is emerging as a significant drug-resistant nosocomial pathogen, which encourages the search for alternative therapies. Here, we have isolated Providencia stuartii phage Stuart, a novel podovirus infecting multidrug-resistant hospital isolates of this bacterium. Phage Stuart is a proposed member of a new Autographivirinae subfamily genus, with a 41,218-bp genome, direct 345-bp repeats at virion DNA ends, and limited sequence similarity of proteins to proteins in databases. Twelve out of the 52 predicted Stuart proteins are virion components. We found one to be a tailspike with depolymerase activity. The tailspike could form a highly thermostable oligomeric β-structure migrating close to the expected trimer in a nondenaturing gel. It appeared to be essential for the infection of three out of four P. stuartii hosts infected by phage Stuart. Moreover, it degraded the exopolysaccharide of relevant phage Stuart hosts, making the bacteria susceptible to serum killing. Prolonged exposure of a sensitive host to the tailspike did not cause the emergence of bacteria resistant to the phage or to serum killing, opposite to the prolonged exposure to the phage. This indicates that phage tail-associated depolymerases are attractive antivirulence agents that could complement the immune system in the fight with P. stuartii IMPORTANCE The pace at which multidrug-resistant strains emerge has been alarming. P. stuartii is an infrequent but relevant drug-resistant nosocomial pathogen causing local to systemic life-threatening infections. We propose an alternative approach to fight this bacterium based on the properties of phage tailspikes with depolymerase activity that degrade the surface bacterial polymers, making the bacteria susceptible to the immune system. Unlike antibiotics, phage tailspikes have narrow and specific substrate spectra, and by acting as antivirulent but not bactericidal agents they do not cause the selection of resistant bacteria.

Genes essential for the morphogenesis of the Shiga toxin 2-transducing phage from Escherichia coli O157:H7

Shiga toxin 2 (Stx2), one of the most important virulence factors of enterohaemorrhagic Escherichia coli (EHEC), is encoded by phages. These phages (Stx2 phages) are often called lambda-like. However, most Stx2 phages are short-tailed, thus belonging to the family Podoviridae, and the functions of many genes, especially those in the late region, are unknown. In this study, we performed a systematic genetic and morphological analysis of genes with unknown functions in Sp5, the Stx2 phage from EHEC O157:H7 strain Sakai. We identified nine essential genes, which, together with the terminase genes, determine Sp5 morphogenesis. Four of these genes most likely encoded portal, major capsid, scaffolding and tail fiber proteins. Although exact roles/functions of the other five genes are unknown, one was involved in head formation and four were required for tail formation. One of the four tail genes encoded an unusually large protein of 2,793 amino-acid residues. Two genes that are likely required to maintain the lysogenic state were also identified. Because the late regions of Stx2 phages from various origins are highly conserved, the present study provides an important basis for better understanding the biology of this unique and medically important group of bacteriophages.

Capsule-Targeting Depolymerase, Derived from Klebsiella KP36 Phage, as a Tool for the Development of Anti-Virulent Strategy

The rise of antibiotic-resistant Klebsiella pneumoniae, a leading nosocomial pathogen, prompts the need for alternative therapies. We have identified and characterized a novel depolymerase enzyme encoded by Klebsiella phage KP36 (depoKP36), from the Siphoviridae family. To gain insights into the catalytic and structural features of depoKP36, we have recombinantly produced this protein of 93.4 kDa and showed that it is able to hydrolyze a crude exopolysaccharide of a K. pneumoniae host. Using in vitro and in vivo assays, we found that depoKP36 was also effective against a native capsule of clinical K. pneumoniae strains, representing the K63 type, and significantly inhibited Klebsiella-induced mortality of Galleria mellonella larvae in a time-dependent manner. DepoKP36 did not affect the antibiotic susceptibility of Klebsiella strains. The activity of this enzyme was retained in a broad range of pH values (4.0–7.0) and temperatures (up to 45 °C). Consistently, the circular dichroism (CD) spectroscopy revealed a highly stability with melting transition temperature (Tm) = 65 °C. In contrast to other phage tailspike proteins, this enzyme was susceptible to sodium dodecyl sulfate (SDS) denaturation and proteolytic cleavage. The structural studies in solution showed a trimeric arrangement with a high β-sheet content. Our findings identify depoKP36 as a suitable candidate for the development of new treatments for K. pneumoniae infections.

Fiber knob domain lacking the shaft sequence but fused to a coiled coil is a candidate subunit vaccine against egg-drop syndrome

Egg-drop syndrome (EDS) virus is an avian adenovirus that causes a sudden drop in egg production and in the quality of the eggs when it infects chickens, leading to substantial economic losses in the poultry industry. Inactivated EDS vaccines produced in embryonated duck eggs or cell culture systems are available for the prophylaxis of EDS. However, recombinant subunit vaccines that are efficacious and inexpensive are a desirable alternative. In this study, we engineered chimeric fusion proteins in which the trimeric fiber knob domain lacking the triple β-spiral motif in the fiber shaft region was genetically fused to trimeric coiled coils, such as those of the engineered form of the GCN4 leucine zipper peptide or chicken cartilage matrix protein (CMP). The fusion proteins were expressed predominantly as soluble trimeric proteins in Escherichia coli at levels of 15-80mg/L of bacterial culture. The single immunization of chickens with the purified fusion proteins, at a dose equivalent to 10μg of the knob moiety, elicited serum antibodies with high hemagglutination inhibition (HI) activities, similar to those induced by an inactivated EDS vaccine. A dose-response analysis indicated that a single immunization with as little as 1μg of the knob moiety of the CMP-knob fusion protein was as effective as the inactivated vaccine in inducing antibodies with HI activity. The immunization of laying hens had no apparent adverse effects on egg production and effectively prevented clinical symptoms of EDS when the chickens were challenged with pathogenic EDS virus. This study demonstrates that the knob domain lacking the shaft sequence but fused to a trimeric coiled coil is a promising candidate subunit vaccine for the prophylaxis of EDS in chickens.

Prediction of Certain Well-Characterized Domains of Known Functions within the PE and PPE Proteins of Mycobacteria

The PE and PPE protein family are unique to mycobacteria. Though the complete genome sequences for over 500 M. tuberculosis strains and mycobacterial species are available, few PE and PPE proteins have been structurally and functionally characterized. We have therefore used bioinformatics tools to characterize the structure and function of these proteins. We selected representative members of the PE and PPE protein family by phylogeny analysis and using structure-based sequence annotation identified ten well-characterized protein domains of known function. Some of these domains were observed to be common to all mycobacterial species and some were species specific.

In silico analysis of AHJD-like viruses, Staphylococcus aureus phages S24-1 and S13', and study of phage S24-1 adsorption

Staphylococcus aureus is a clinically important bacterium that is commensal in both humans and animals. Bacteriophage (phage) attachment to the host bacterial surface is an important process during phage infection, which involves interactions between phage receptor-binding proteins and host receptor molecules. However, little information is available on the receptor-binding protein of S. aureus phages. S. aureus virulent phages S24-1 and S13' (family Podoviridae, genus AHJD-like viruses) were isolated from sewage. In the present study, we investigated the receptor-binding protein of AHJD-like viruses using phage S24-1. First, based on a comparative genomic analysis of phages S24-1 and S13', open reading frame 16 (ORF16) of phage S24-1 was speculated to be the receptor-binding protein, which possibly determines the host range. Second, we demonstrated that this was the receptor-binding protein of phage S24-1. Third, our study suggested that wall teichoic acids in the cell walls of S. aureus are the main receptor molecules for ORF16 and phage S24-1. Finally, the C-terminal region of ORF16 may be essential for binding to S. aureus. These results strongly suggest that ORF16 of phage S24-1 and its homologs may be the receptor-binding proteins of AHJD-like viruses.

Crystal structure of ORF210 from E. coli O157:H1 phage CBA120 (TSP1), a putative tailspike protein

Bacteriophage tailspike proteins act as primary receptors, often possessing endoglycosidase activity toward bacterial lipopolysaccharides or other exopolysaccharides, which enable phage absorption and subsequent DNA injection into the host. Phage CBA120, a contractile long-tailed Viunalikevirus phage infects the virulent Escherichia coli O157:H7. This phage encodes four putative tailspike proteins exhibiting little amino acid sequence identity, whose biological roles and substrate specificities are unknown. Here we focus on the first tailspike, TSP1, encoded by the orf210 gene. We have discovered that TSP1 is resistant to protease degradation, exhibits high thermal stability, but does not cleave the O157 antigen. An immune-dot blot has shown that TSP1 binds strongly to non-O157:H7 E. coli cells and more weakly to K. pneumoniae cells, but exhibits little binding to E. coli O157:H7 strains. To facilitate structure-function studies, we have determined the crystal structure of TSP1 to a resolution limit of 1.8 Å. Similar to other tailspikes proteins, TSP1 assembles into elongated homotrimers. The receptor binding region of each subunit adopts a right-handed parallel β helix, reminiscent yet not identical to several known tailspike structures. The structure of the N-terminal domain that binds to the virion particle has not been seen previously. Potential endoglycosidase catalytic sites at the three subunit interfaces contain two adjacent glutamic acids, unlike any catalytic machinery observed in other tailspikes. To identify potential sugar binding sites, the crystal structures of TSP1 in complexes with glucose, α-maltose, or α-lactose were determined. These structures revealed that each sugar binds in a different location and none of the environments appears consistent with an endoglycosidase catalytic site. Such sites may serve to bind sugar units of a yet to be identified bacterial exopolysaccharide.

Contrasting genomic patterns and infection strategies of two co-existing Bacteroidetes podovirus genera

Bacterial viruses (phages) are abundant, ecologically important biological entities. However, our understanding of their impact is limited by model systems that are primarily not well represented in nature, e.g. Enterophages and their hosts. Here, we investigate genomic characteristics and infection strategies among six aquatic Bacteroidetes phages that represent two genera of exceptionally large (∼70-75 kb genome) podoviruses, which were isolated from the same seawater sample using Cellulophaga baltica as host. Quantitative host range studies reveal that these genera have contrasting narrow (specialist) and broad (generalist) host ranges, with one-step growth curves revealing reduced burst sizes for the generalist phages. Genomic comparisons suggest candidate genes in each genus that might explain this host range variation, as well as provide hypotheses about receptors in the hosts. One generalist phage, φ38:1, was more deeply characterized, as its infection strategy switched from lytic on its original host to either inefficient lytic or lysogenic on an alternative host. If lysogenic, this phage was maintained extrachromosomally in the alternative host and could not be induced by mitomycin C. This work provides fundamental knowledge regarding phage-host ranges and their genomic drivers while also exploring the 'host environment' as a driver for switching phage replication mode.

Combination of theoretical and experimental approaches for the design and study of fibril-forming peptides

Self-assembling peptides that can form supramolecular structures such as fibrils, ribbons, and nanotubes are of particular interest to modern bionanotechnology and materials science. Their ability to form biocompatible nanostructures under mild conditions through non-covalent interactions offers a big biofabrication advantage. Structural motifs extracted from natural proteins are an important source of inspiration for the rational design of such peptides. Examples include designer self-assembling peptides that correspond to natural coiled-coil motifs, amyloid-forming proteins, and natural fibrous proteins. In this chapter, we focus on the exploitation of structural information from beta-structured natural fibers. We review a case study of short peptides that correspond to sequences from the adenovirus fiber shaft. We describe both theoretical methods for the study of their self-assembly potential and basic experimental protocols for the assessment of fibril-forming assembly.

Structure of the Chlamydia trachomatis immunodominant antigen Pgp3

Chlamydia trachomatis infection is the most common sexually transmitted bacterial disease. Left untreated, it can lead to ectopic pregnancy, pelvic inflammatory disease, and infertility. Here we present the structure of the secreted C. trachomatis protein Pgp3, an immunodominant antigen and putative virulence factor. The ∼84-kDa Pgp3 homotrimer, encoded on a cryptic plasmid, consists of globular N- and C-terminal assemblies connected by a triple-helical coiled-coil. The C-terminal domains possess folds similar to members of the TNF family of cytokines. The closest Pgp3 C-terminal domain structural homologs include a lectin from Burkholderia cenocepacia, the C1q component of complement, and a portion of the Bacillus anthracis spore surface protein BclA, all of which play roles in bioadhesion. The N-terminal domain consists of a concatenation of structural motifs typically found in trimeric viral proteins. The central parallel triple-helical coiled-coil contains an unusual alternating pattern of apolar and polar residue pairs that generate a rare right-handed superhelical twist. The unique architecture of Pgp3 provides the basis for understanding its role in chlamydial pathogenesis and serves as the platform for its optimization as a potential vaccine antigen candidate.

Bacteriophage based probes for pathogen detection

Rapid and specific detection of pathogenic bacteria is important for the proper treatment, containment and prevention of human, animal and plant diseases. Identifying unique biological probes to achieve a high degree of specificity and minimize false positives has therefore garnered much interest in recent years. Bacteriophages are obligate intracellular parasites that subvert bacterial cell resources for their own multiplication and production of disseminative new virions, which repeat the cycle by binding specifically to the host surface receptors and injecting genetic material into the bacterial cells. The precision of host recognition in phages is imparted by the receptor binding proteins (RBPs) that are often located in the tail-spike or tail fiber protein assemblies of the virions. Phage host recognition specificity has been traditionally exploited for bacterial typing using laborious and time consuming bacterial growth assays. At the same time this feature makes phage virions or RBPs an excellent choice for the development of probes capable of selectively capturing bacteria on solid surfaces with subsequent quick and automatic detection of the binding event. This review focuses on the description of pathogen detection approaches based on immobilized phage virions as well as pure recombinant RBPs. Specific advantages of RBP-based molecular probes are also discussed.

Collagen-like proteins in pathogenic E. coli strains

The genome sequences of enterohaemorrhagic E. coli O157:H7 strains show multiple open-reading frames with collagen-like sequences that are absent from the common laboratory strain K-12. These putative collagens are included in prophages embedded in O157:H7 genomes. These prophages carry numerous genes related to strain virulence and have been shown to be inducible and capable of disseminating virulence factors by horizontal gene transfer. We have cloned two collagen-like proteins from E. coli O157:H7 into a laboratory strain and analysed the structure and conformation of the recombinant proteins and several of their constituting domains by a variety of spectroscopic, biophysical, and electron microscopy techniques. We show that these molecules exhibit many of the characteristics of vertebrate collagens, including trimer formation and the presence of a collagen triple helical domain. They also contain a C-terminal trimerization domain, and a trimeric α-helical coiled-coil domain with an unusual amino acid sequence almost completely lacking leucine, valine or isoleucine residues. Intriguingly, these molecules show high thermal stability, with the collagen domain being more stable than those of vertebrate fibrillar collagens, which are much longer and post-translationally modified. Under the electron microscope, collagen-like proteins from E. coli O157:H7 show a dumbbell shape, with two globular domains joined by a hinged stalk. This morphology is consistent with their likely role as trimeric phage side-tail proteins that participate in the attachment of phage particles to E. coli target cells, either directly or through assembly with other phage tail proteins. Thus, collagen-like proteins in enterohaemorrhagic E. coli genomes may have a direct role in the dissemination of virulence-related genes through infection of harmless strains by induced bacteriophages.

Haloarchaeal myovirus φCh1 harbours a phase variation system for the production of protein variants with distinct cell surface adhesion specificities

The φCh1 myovirus, which infects the haloalkaliphilic archaeon Natrialba magadii, contains an invertible region that comprises the convergent open reading frames (ORFs) 34 and 36, which code for the putative tail fibre proteins gp34 and gp36 respectively. The inversion leads to an exchange of the C-termini of these proteins, thereby creating different types of tail fibres. Gene expression experiments revealed that only ORF34 is transcribed, indicating that φCh1 produces tail fibre proteins exclusively from this particular ORF. Only one of the two types of tail fibres encoded by ORF34 is able to bind to Nab. magadii in vitro. This is reflected by the observation that during the early phases of the infection cycle, the lysogenic strain L11 carries its invertible region exclusively in the orientation that produces that specific type of tail fibre. Obviously, Nab. magadii can only be infected by viruses carrying this particular type of tail fibre. By mutational analysis, the binding domain of gp34 was localized to the C-terminal part of the protein, particularly to a galactose-binding domain. The involvement of galactose residues in cell adhesion was supported by the observation that the addition of α-D-galactose to purified gp34 or whole virions prevented their attachment to Nab. magadii.

The host-binding domain of the P2 phage tail spike reveals a trimeric iron-binding structure

The adsorption and infection of bacteriophage P2 is mediated by tail fibres and tail spikes. The tail spikes on the tail baseplate are used to irreversibly adsorb to the host cells. Recently, a P2 phage tail-spike protein, gpV, was purified and it was shown that a C-terminal domain, Ser87-Leu211, is sufficient for the binding of gpV to host Escherichia coli membranes [Kageyama et al. (2009), Biochemistry, 48, 10129-10135]. In this paper, the crystal structure of the C-terminal domain of P2 gpV is reported. The structure is a triangular pyramid and looks like a spearhead composed of an intertwined β-sheet, a triple β-helix and a metal-binding region containing iron, calcium and chloride ions.

Knitting and snipping: chaperones in β-helix folding

Hallmarks of proteins containing β-helices are their increased stability and rigidity and their aggregation prone folding pathways. While parallel β-helices fold independently, the folding and assembly of many triple β-helices depends on a registration signal in order to adopt the correct three-dimensional structure. In some cases this is a mere trimerization domain, in others specialized chaperones are required. Recently, the crystal structures of two classes of intramolecular chaperones of β-helical proteins have been determined. Both mediate the assembly of large tailspike proteins and release themselves after maturation; however, they differ substantially in their structure and autoproteolytic release mechanisms.

EDC/NHS-crosslinked type II collagen-chondroitin sulfate scaffold: characterization and in vitro evaluation

Three-dimensional biodegradable porous type II collagen scaffolds are interesting materials for cartilage tissue engineering. This study reports the preparation of porous type II collagen-chondroitin sulfate (CS) scaffold using variable concentrations of 1-ethyl-3(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The physico-chemical properties and ultrastructural morphology of the collagen scaffolds were determined. Then, isolated chondrocytes were cultured in porous type II collagen scaffolds either in the presence and/or absence of covalently attached CS up to 14 days. Cell proliferation, the total amount of proteoglycans and type II collagen retained in the scaffold and chondrocytes morphology were evaluated. The results suggest that EDC-crosslinking improves the mechanical stability of collagen-CS scaffolds with increasing EDC concentration. Cell proliferation and the total amount of proteoglycans and type II collagen retained in the scaffolds were higher in type II collagen-CS scaffolds. Histological analysis showed the formation of a denser cartilaginous layer at the scaffold periphery. Scanning electron microscopy (SEM) revealed chondrocytes distributed the porous surface of both scaffolds maintained their spherical morphology. The results of the present study also indicate that type II collagen-CS scaffolds have potential for use in tissue engineering.

Creation of hybrid nanorods from sequences of natural trimeric fibrous proteins using the fibritin trimerization motif

Stable, artificial fibrous proteins that can be functionalized open new avenues in fields such as bionanomaterials design and fiber engineering. An important source of inspiration for the creation of such proteins are natural fibrous proteins such as collagen, elastin, insect silks, and fibers from phages and viruses. The fibrous parts of this last class of proteins usually adopt trimeric, beta-stranded structural folds and are appended to globular, receptor-binding domains. It has been recently shown that the globular domains are essential for correct folding and trimerization and can be successfully substituted by a very small (27-amino acid) trimerization motif from phage T4 fibritin. The hybrid proteins are correctly folded nanorods that can withstand extreme conditions. When the fibrous part derives from the adenovirus fiber shaft, different tissue-targeting specificities can be engineered into the hybrid proteins, which therefore can be used as gene therapy vectors. The integration of such stable nanorods in devices is also a big challenge in the field of biomechanical design. The fibritin foldon domain is a versatile trimerization motif and can be combined with a variety of fibrous motifs, such as coiled-coil, collagenous, and triple beta-stranded motifs, provided the appropriate linkers are used. The combination of different motifs within the same fibrous molecule to create stable rods with multiple functions can even be envisioned. We provide a comprehensive overview of the experimental procedures used for designing, creating, and characterizing hybrid fibrous nanorods using the fibritin trimerization motif.

Current advances and future challenges in Adenoviral vector biology and targeting

Gene delivery vectors based on Adenoviral (Ad) vectors have enormous potential for the treatment of both hereditary and acquired disease. Detailed structural analysis of the Ad virion, combined with functional studies has broadened our knowledge of the structure/function relationships between Ad vectors and host cells/tissues and substantial achievement has been made towards a thorough understanding of the biology of Ad vectors. The widespread use of Ad vectors for clinical gene therapy is compromised by their inherent immunogenicity. The generation of safer and more effective Ad vectors, targeted to the site of disease, has therefore become a great ambition in the field of Ad vector development. This review provides a synopsis of the structure/function relationships between Ad vectors and host systems and summarizes the many innovative approaches towards achieving Ad vector targeting.

Analysis of the collar-whisker structure of temperate lactococcal bacteriophage TP901-1

Proteins homologous to the protein NPS (neck passage structure) are widespread among lactococcal phages. We investigated the hypothesis that NPS is involved in the infection of phage TP901-1 by analysis of an NPS- mutant. NPS was determined to form a collar-whisker complex but was shown to be nonessential for infection, phage assembly, and stability.

Dissociation of intermolecular disulfide bonds in P22 tailspike protein intermediates in the presence of SDS

Each chain of the native trimeric P22 tailspike protein has eight cysteines that are reduced and buried in its hydrophobic core. However, disulfide bonds have been observed in the folding pathway and they are believed to play a critical role in the registration of the three chains. Interestingly, in the presence of sodium dodecyl sulfate (SDS) only monomeric chains, rather than disulfide-linked oligomers, have been observed from a mixture of folding intermediates. Here we show that when the oligomeric folding intermediates were separated from the monomer by native gel electrophoresis, the reduction of intermolecular disulfide bonds did not occur in the subsequent second-dimension SDS-gel electrophoresis. This result suggests that when tailspike monomer is present in free solution with SDS, the partially unfolded tailspike monomer can facilitate the reduction of disulfide bonds in the tailspike oligomers.

Modular structure of the receptor binding proteins of Lactococcus lactis phages. The RBP structure of the temperate phage TP901-1

Lactococcus lactis is a gram-positive bacterium widely used by the dairy industry. Several industrial L. lactis strains are sensitive to various distinct bacteriophages. Most of them belong to the Siphoviridae family and comprise several species, among which the 936 and P335 are prominent. Members of these two phage species recognize their hosts through the interaction of their receptor-binding protein (RBP) with external cell wall saccharidices of the host, the "receptors." We report here the 1.65 A resolution crystal structure of the RBP from phage TP901-1, a member of the P335 species. This RBP of 163 amino acids is a homotrimer comprising three domains: a helical N terminus, an interlaced beta-prism, and a beta-barrel, the head domain (residues 64-163), which binds a glycerol molecule. Fluorescence quenching experiments indicated that the RBP exhibits high affinity for glycerol, muramyl-dipeptide, and other saccharides in solution. The structural comparison of this RBP with that of lactococcal phage p2 RBP, a member of the 936 species (Spinelli, S., Desmyter, A., Verrips, C. T., de Haard, J. W., Moineau, S., and Cambillau, C. (2006) Nat. Struct. Mol. Biol. 13, 85-89) suggests a large extent of modularity in RBPs of lactococcal phages.

Identification of the region responsible for fibril formation in the CAD domain of caspase-activated DNase

Caspase-activated DNase (CAD) has a compact domain at its N-terminus (CAD domain, 87 amino acid residues), which comprises one alpha-helix and five beta-strands forming a single sheet. The CAD domain of CAD (CAD-CD) forms amyloid fibrils containing alpha-helix at low pH in the presence of salt. To obtain insights into the mechanism of amyloid fibril formation, we identified the peptide region essential for fibril formation of CAD-CD and the region responsible for the salt requirement. We searched for these regions by constructing a series of deletion and point mutants of CAD-CD. Fibril formation by these CAD-CD mutants was examined by fluorescence analysis of thioflavin T and transmission electron microscopy. C-Terminal deletion and point mutation studies revealed that an aromatic residue near the C-terminus (Trp81) is critical for fibril formation. In addition, the main chain conformation of the beta5 strand, which forms a hydrophobic core with Trp81, was found to be important for the fibril formation by CAD-CD. The N-terminal 30 amino acid region containing two beta-strands was not essential for fibril formation. Rather, the N-terminal region was found to be responsible for the requirement of salt for fibril formation.

Stalled folding mutants in the triple beta-helix domain of the phage P22 tailspike adhesin

The trimeric bacteriophage P22 tailspike adhesin exhibits a domain in which three extended strands intertwine, forming a single turn of a triple beta-helix. This domain contains a single hydrophobic core composed of residues contributed by each of the three sister polypeptide chains. The triple beta-helix functions as a molecular clamp, increasing the stability of this elongated structural protein. During folding of the tailspike protein, the last precursor before the native state is a partially folded trimeric intermediate called the protrimer. The transition from the protrimer to the native state results in a structure that is resistant to denaturation by heat, chemical denaturants, and proteases. Random mutations were made in the region encoding residues 540-548, where the sister chains begin to wrap around each other. From a set of 26 unique single amino acid substitutions, we characterized mutations at G546, N547, and I548 that retarded or blocked the protrimer to native trimer transition. In contrast, many non-conservative substitutions were tolerated at residues 540-544. Sucrose gradient analysis showed that protrimer-like mutants had reduced sedimentation, 8.0 S to 8.3 S versus 9.3 S for the native trimer. Mutants affected in the protrimer to native trimer transition were also destabilized in their native state. These data suggest that the folding of the triple beta-helix domain drives transition of the protrimer to the native state and is accompanied by a major rearrangement of polypeptide chains.

Orientation within the exosporium and structural stability of the collagen-like glycoprotein BclA of Bacillus anthracis

Bacillus anthracis spores, which cause anthrax, are enclosed by an exosporium consisting of a basal layer and an external hair-like nap. The filaments of the nap are composed of BclA, a glycoprotein containing distinct N-terminal (NTD) and C-terminal (CTD) domains separated by an extended collagen-like central region. In this study, we used immunogold electron microscopy to show that the CTD of BclA forms the distal end of each filament of the hair-like nap, indicating that the NTD is attached to the basal layer. Ten randomly chosen anti-BclA monoclonal antibodies, raised against spores or exosporium, reacted with the CTD, consistent with its exterior location. We showed that recombinant BclA (rBclA), encoded by the B. anthracis Sterne strain and synthesized in Escherichia coli, forms a collagen-like triple helix as judged by collagenase sensitivity and circular dichroism spectroscopy. In contrast, native BclA in spores was resistant to collagenase digestion. Thermal denaturation studies showed that the collagen-like region of rBclA exhibited a melting temperature (T(m)) of 37 degrees C, like mammalian collagen. However, rBclA trimers exhibited T(m) values of 84 degrees C and 95 degrees C in buffer with and without sodium dodecyl sulfate, respectively. CTD trimers exhibited the same T(m) values, indicating that the high temperature and detergent resistances of rBclA were due to strong CTD interactions. We observed that CTD trimers are resistant to many proteases and readily form large crystalline sheets. Structural data indicate that the CTD is composed of multiple beta strands. Taken together, our results suggest that BclA and particularly its CTD form a rugged shield around the spore.

Buried hydrophobic side-chains essential for the folding of the parallel beta-helix domains of the P22 tailspike

The processive beta-strands and turns of a polypeptide parallel beta-helix represent one of the topologically simplest beta-sheet folds. The three subunits of the tailspike adhesin of phage P22 each contain 13 rungs of a parallel beta-helix followed by an interdigitated section of triple-stranded beta-helix. Long stacks of hydrophobic residues dominate the elongated buried core of these two beta-helix domains and extend into the core of the contiguous triple beta-prism domain. To test whether these side-chain stacks represent essential residues for driving the chain into the correct fold, each of three stacked phenylalanine residues within the buried core were substituted with less bulky amino acids. The mutant chains with alanine in place of phenylalanine were defective in intracellular folding. The chains accumulated exclusively in the aggregated inclusion body state regardless of temperature of folding. These severe folding defects indicate that the stacked phenylalanine residues are essential for correct parallel beta-helix folding. Replacement of the same phenylalanine residues with valine or leucine also impaired folding in vivo, but with less severity. Mutants were also constructed in a second buried stack that extends into the intertwined triple-stranded beta-helix and contiguous beta-prism regions of the protein. These mutants exhibited severe defects in later stages of chain folding or assembly, accumulating as misfolded but soluble multimeric species. The results indicate that the formation of the buried hydrophobic stacks is critical for the correct folding of the parallel beta-helix, triple-stranded beta-helix, and beta-prism domains in the tailspike protein.

gpwac of the T4-type bacteriophages: structure, function, and evolution of a segmented coiled-coil protein that controls viral infectivity

The wac gene product (gpwac) or fibritin of bacteriophage T4 forms the six fibers that radiate from the phage neck. During phage morphogenesis these whiskers bind the long tail fibers (LTFs) and facilitate their attachment to the phage baseplate. After the cell lysis, the gpwac fibers function as part of an environmental sensing device that retains the LTFs in a retracted configuration and thus prevents phage adsorption in unfavorable conditions. A comparative analysis of the sequences of 5 wac gene orthologs from various T4-type phages reveals that the approximately 50-amino-acid N-terminal domain is the only highly conserved segment of the protein. This sequence conservation is probably a direct consequence of the domain's strong and specific interactions with the neck proteins. The sequence of the central fibrous region of gpwac is highly plastic, with only the heptad periodicity of the coiled-coil structure being conserved. In the various gpwac sequences, the small C-terminal domain essential for initiation of the folding of T4 gpwac is replaced by unrelated sequences of unknown origin. When a distant T4-type phage has a novel C-terminal gpwac sequence, the phage's gp36 sequence that is located at the knee joint of the LTF invariably has a novel domain in its C terminus as well. The covariance of these two sequences is compatible with genetic data suggesting that the C termini of gpwac and gp36 engage in a protein-protein interaction that controls phage infectivity. These results add to the limited evidence for domain swapping in the evolution of phage structural proteins.

Amyloid fibril formation from sequences of a natural beta-structured fibrous protein, the adenovirus fiber

Amyloid fibrils are fibrous beta-structures that derive from abnormal folding and assembly of peptides and proteins. Despite a wealth of structural studies on amyloids, the nature of the amyloid structure remains elusive; possible connections to natural, beta-structured fibrous motifs have been suggested. In this work we focus on understanding amyloid structure and formation from sequences of a natural, beta-structured fibrous protein. We show that short peptides (25 to 6 amino acids) corresponding to repetitive sequences from the adenovirus fiber shaft have an intrinsic capacity to form amyloid fibrils as judged by electron microscopy, Congo Red binding, infrared spectroscopy, and x-ray fiber diffraction. In the presence of the globular C-terminal domain of the protein that acts as a trimerization motif, the shaft sequences adopt a triple-stranded, beta-fibrous motif. We discuss the possible structure and arrangement of these sequences within the amyloid fibril, as compared with the one adopted within the native structure. A 6-amino acid peptide, corresponding to the last beta-strand of the shaft, was found to be sufficient to form amyloid fibrils. Structural analysis of these amyloid fibrils suggests that perpendicular stacking of beta-strand repeat units is an underlying common feature of amyloid formation.

Secondary Structures and Conformational Changes in Flagelliform, Cylindrical, Major, and Minor Ampullate Silk Proteins. Temperature and Concentration Effects

Orb weaver spiders use exceptionally complex spinning processes to transform soluble silk proteins into solid fibers with specific functions and mechanical properties. In this study, to understand the nature of this transformation we investigated the structural changes of the soluble silk proteins from the major ampullate gland (web radial threads and spider safety line); flagelliform gland (web sticky spiral threads); minor ampullate gland (web auxiliary spiral threads); and cylindrical gland (egg sac silk). Using circular dichroism, we elucidated (i) the different structures and folds for the various silk proteins; (ii) irreversible temperature-induced transitions of the various silk structures toward beta-sheet-rich final states; and (iii) the role of protein concentration in silk storage and transport. We discuss the implication of these results in the spinning process and a possible mechanism for temperature-induced beta-sheet formation.

Adenovirus Fibre Shaft Sequences Fold into the Native Triple Beta-Spiral Fold when N-terminally Fused to the Bacteriophage T4 Fibritin Foldon Trimerisation Motif

Adenovirus fibres are trimeric proteins that consist of a globular C-terminal domain, a central fibrous shaft and an N-terminal part that attaches to the viral capsid. In the presence of the globular C-terminal domain, which is necessary for correct trimerisation, the shaft segment adopts a triple beta-spiral conformation. We have replaced the head of the fibre by the trimerisation domain of the bacteriophage T4 fibritin, the foldon. Two different fusion constructs were made and crystallised, one with an eight amino acid residue linker and one with a linker of only two residues. X-ray crystallographic studies of both fusion proteins shows that residues 319-391 of the adenovirus type 2 fibre shaft fold into a triple beta-spiral fold indistinguishable from the native structure, although this is now resolved at a higher resolution of 1.9 A. The foldon residues 458-483 also adopt their natural structure. The intervening linkers are not well ordered in the crystal structures. This work shows that the shaft sequences retain their capacity to fold into their native beta-spiral fibrous fold when fused to a foreign C-terminal trimerisation motif. It provides a structural basis to artificially trimerise longer adenovirus shaft segments and segments from other trimeric beta-structured fibre proteins. Such artificial fibrous constructs, amenable to crystallisation and solution studies, can offer tractable model systems for the study of beta-fibrous structure. They can also prove useful for gene therapy and fibre engineering applications.

Crystal Structure of Phenylalanine Ammonia Lyase: Multiple Helix Dipoles Implicated in Catalysis†,‡

The first three-dimensional structure of phenylalanine ammonia lyase (PAL) has been determined at 2.1 A resolution for PAL from Rhodosporidium toruloides. The enzyme is structurally similar to the mechanistically related histidine ammonia lyase (HAL), with PAL having an additional approximately 160 residues extending from the common fold. We propose that catalysis (including lowering the pK(a) of nonacidic C3 of l-phenylalanine for an E1cb mechanism) is potentially governed by dipole moments of seven alpha helices associated with the PAL active site (six positive poles and one negative pole). Cofactor 3,5-dihydro-5-methylidene-4H-imidazol-4-one (MIO) resides atop the positive poles of three helices, for increasing its electrophilicity. The helix dipoles appear fully compatible with a model of phenylalanine docked in the active site of PAL having the first covalent bond formed between the amino group of substrate and the methylidene group of MIO: 12 highly conserved residues (near the N termini of helices for enhancing function) are poised to serve roles in substrate recognition, MIO activation, product separation, proton donation, or polarizing electrons from the phenyl ring of substrate for activation of C3; and a highly conserved His residue (near the C terminus of the one helix that directs its negative pole toward the active site to increase the residue's basicity) is positioned to act as a general base, abstracting the pro-S hydrogen from C3 of substrate. A similar mechanism is proposed for HAL, which has a similar disposition of seven alpha helices and similar active-site residues. The helix dipoles appear incompatible with a proposed mechanism that invokes a carbocation intermediate.

Formation of Highly Stable Chimeric Trimers by Fusion of an Adenovirus Fiber Shaft Fragment with the Foldon Domain of Bacteriophage T4 Fibritin

The folding of beta-structured, fibrous proteins is a largely unexplored area. A class of such proteins is used by viruses as adhesins, and recent studies revealed novel beta-structured motifs for them. We have been studying the folding and assembly of adenovirus fibers that consist of a globular C-terminal domain, a central fibrous shaft, and an N-terminal part that attaches to the viral capsid. The globular C-terminal, or "head" domain, has been postulated to be necessary for the trimerization of the fiber and might act as a registration signal that directs its correct folding and assembly. In this work, we replaced the head of the fiber by the trimerization domain of the bacteriophage T4 fibritin, termed "foldon." Two chimeric proteins, comprising the foldon domain connected at the C-terminal end of four fiber shaft repeats with or without the use of a natural linker sequence, fold into highly stable, SDS-resistant trimers. The structural signatures of the chimeric proteins as seen by CD and infrared spectroscopy are reported. The results suggest that the foldon domain can successfully replace the fiber head domain in ensuring correct trimerization of the shaft sequences. Biological implications and implications for engineering highly stable, beta-structured nanorods are discussed.

Molecular basis of bacterial outer membrane permeability revisited

Gram-negative bacteria characteristically are surrounded by an additional membrane layer, the outer membrane. Although outer membrane components often play important roles in the interaction of symbiotic or pathogenic bacteria with their host organisms, the major role of this membrane must usually be to serve as a permeability barrier to prevent the entry of noxious compounds and at the same time to allow the influx of nutrient molecules. This review summarizes the development in the field since our previous review (H. Nikaido and M. Vaara, Microbiol. Rev. 49:1-32, 1985) was published. With the discovery of protein channels, structural knowledge enables us to understand in molecular detail how porins, specific channels, TonB-linked receptors, and other proteins function. We are now beginning to see how the export of large proteins occurs across the outer membrane. With our knowledge of the lipopolysaccharide-phospholipid asymmetric bilayer of the outer membrane, we are finally beginning to understand how this bilayer can retard the entry of lipophilic compounds, owing to our increasing knowledge about the chemistry of lipopolysaccharide from diverse organisms and the way in which lipopolysaccharide structure is modified by environmental conditions.