Tagging the human immunodeficiency virus gag protein with green fluorescent protein. Minimal evidence for colocalisation with actin

Packaging and Uncoating of CRISPR/Cas Ribonucleoproteins for Efficient Gene Editing with Viral and Non-Viral Extracellular Nanoparticles

Rapid progress in gene editing based on clustered regularly interspaced short palindromic repeats/CRISPR-associated protein (CRISPR/Cas) has revolutionized functional genomic studies and genetic disease correction. While numerous gene editing applications have been easily adapted by experimental science, the clinical utility of CRISPR/Cas remains very limited due to difficulty in delivery to primary cells and possible off-target effects. The use of CRISPR in the form of a ribonucleoprotein (RNP) complex substantially reduces the time of DNA exposure to the effector nuclease and minimizes its off-target activity. The traditional electroporation and lipofection methods lack the cell-type specificity of RNP delivery, can be toxic for cells, and are less efficient when compared to nanoparticle transporters. This review focuses on CRISPR/Cas RNP packaging and delivery using retro/lentiviral particles and exosomes. First, we briefly describe the natural stages of viral and exosomal particle formation, release and entry into the target cells. This helps us understand the mechanisms of CRISPR/Cas RNP packaging and uncoating utilized by the current delivery systems, which we discuss afterward. Much attention is given to the exosomes released during viral particle production that can be passively loaded with RNPs as well as the mechanisms necessary for particle fusion, RNP release, and transportation inside the target cells. Collectively, together with specific packaging mechanisms, all these factors can substantially influence the editing efficiency of the system. Finally, we discuss ways to improve CRISPR/Cas RNP delivery using extracellular nanoparticles.

How HIV-1 Gag Manipulates Its Host Cell Proteins: A Focus on Interactors of the Nucleocapsid Domain

The human immunodeficiency virus (HIV-1) polyprotein Gag (Group-specific antigen) plays a central role in controlling the late phase of the viral lifecycle. Considered to be only a scaffolding protein for a long time, the structural protein Gag plays determinate and specific roles in HIV-1 replication. Indeed, via its different domains, Gag orchestrates the specific encapsidation of the genomic RNA, drives the formation of the viral particle by its auto-assembly (multimerization), binds multiple viral proteins, and interacts with a large number of cellular proteins that are needed for its functions from its translation location to the plasma membrane, where newly formed virions are released. Here, we review the interactions between HIV-1 Gag and 66 cellular proteins. Notably, we describe the techniques used to evidence these interactions, the different domains of Gag involved, and the implications of these interactions in the HIV-1 replication cycle. In the final part, we focus on the interactions involving the highly conserved nucleocapsid (NC) domain of Gag and detail the functions of the NC interactants along the viral lifecycle.

Labeling of virus components for advanced, quantitative imaging analyses

In recent years, investigation of virus-cell interactions has moved from ensemble measurements to imaging analyses at the single-particle level. Advanced fluorescence microscopy techniques provide single-molecule sensitivity and subdiffraction spatial resolution, allowing observation of subviral details and individual replication events to obtain detailed quantitative information. To exploit the full potential of these techniques, virologists need to employ novel labeling strategies, taking into account specific constraints imposed by viruses, as well as unique requirements of microscopic methods. Here, we compare strengths and limitations of various labeling methods, exemplify virological questions that were successfully addressed, and discuss challenges and future potential of novel approaches in virus imaging.

Role of the nucleocapsid region in HIV-1 Gag assembly as investigated by quantitative fluorescence-based microscopy

The Gag precursor of HIV-1, formed of the four proteic regions matrix (MA), capsid (CA), nucleocapsid (NC) and p6, orchestrates virus morphogenesis. This complex process relies on three major interactions, NC-RNA acting as a scaffold, CA-CA and MA-membrane that targets assembly to the plasma membrane (PM). The characterization of the molecular mechanism of retroviral assembly has extensively benefited from biochemical studies and more recently an important step forward was achieved with the use of fluorescence-based techniques and fluorescently labeled viral proteins. In this review, we summarize the findings obtained with such techniques, notably quantitative-based approaches, which highlight the role of the NC region in Gag assembly.

In vitro analysis of human immunodeficiency virus particle dissociation: gag proteolytic processing influences dissociation kinetics

Human immunodeficiency virus particles undergo a step of proteolytic maturation, in which the main structural polyprotein Gag is cleaved into its mature subunits matrix (MA), capsid (CA), nucleocapsid (NC) and p6. Gag proteolytic processing is accompanied by a dramatic structural rearrangement within the virion, which is necessary for virus infectivity and has been proposed to proceed through a sequence of dissociation and reformation of the capsid lattice. Morphological maturation appears to be tightly regulated, with sequential cleavage events and two small spacer peptides within Gag playing important roles by regulating the disassembly of the immature capsid layer and formation of the mature capsid lattice. In order to measure the influence of individual Gag domains on lattice stability, we established Förster's resonance energy transfer (FRET) reporter virions and employed rapid kinetic FRET and light scatter measurements. This approach allowed us to measure dissociation properties of HIV-1 particles assembled in eukaryotic cells containing Gag proteins in different states of proteolytic processing. While the complex dissociation behavior of the particles prevented an assignment of kinetic rate constants to individual dissociation steps, our analyses revealed characteristic differences in the dissociation properties of the MA layer dependent on the presence of additional domains. The most striking effect observed here was a pronounced stabilization of the MA-CA layer mediated by the presence of the 14 amino acid long spacer peptide SP1 at the CA C-terminus, underlining the crucial role of this peptide for the resolution of the immature particle architecture.

Imaging of HIV assembly and release

Assembly, release and maturation of HIV-1 particles comprise a highly dynamic sequence of events, characterized by a series of dramatic rearrangements of the viral structural proteins and overall virion architecture. HIV-1 morphogenesis is a relatively rapid and asynchronous process, showing high variability between cells and individual virions. Therefore, bulk biochemical methods are not ideally suited to study specific aspects of this process in detail. In contrast, imaging represents a direct approach to analyze individual particles and events. While live-cell imaging can reveal the dynamics of intracellular events with high temporal resolution, it falls short in revealing ultra-structural details. Thus, live-cell fluorescence microscopy and electron microscopy (EM) can complement each other to gain insight into both the dynamics of assembly and the structures detected at HIV-1 assembly sites. In this chapter we describe microscopic setups, tools, and methods for live-cell fluorescence microscopy as well as for different EM techniques, which have been successfully used by us and others to study HIV-1 assembly at the host cell plasma membrane. These methods can be used in a complementary manner to investigate the effects of cellular factors, mutations in the viral genome or antiviral drugs on dynamic and structural aspects of HIV-1 morphogenesis.

Investigation of HIV-1 assembly and release using modern fluorescence imaging techniques

The replication of HIV-1, like that of all viruses, is intimately connected with cellular structures and pathways. For many years, bulk biochemical and cell biological methods were the main approaches employed to investigate interactions between HIV-1 and its host cell. However, during the past decade advancements in fluorescence imaging technologies opened new possibilities for the direct visualization of individual steps occurring throughout the viral replication cycle. Electron microscopy (EM) methods, which have traditionally been employed for the study of viruses, are complemented by fluorescence microscopy (FM) techniques that allow us to follow the dynamics of virus-cell interaction. Subdiffraction fluorescence microscopy, as well as correlative EM/FM approaches, are narrowing the fundamental gap between the high structural resolution provided by EM and the high temporal resolution and throughput accomplished by FM. The application of modern microscopy to the study of HIV-1-host cell interactions has provided insights into the biology of the virus which could not easily, or not at all, have been gained by other methods. Here, we review how modern fluorescence imaging techniques enhanced our knowledge of the dynamic and structural changes involved in HIV-1 particle formation.

Visualizing HIV-1 assembly

The assembly of an HIV-1 particle is a complex, multistep process involving several viral and cellular proteins, RNAs and lipids. While many macroscopic and fixed-cell microscopic techniques have provided important insights into the structure of HIV-1 particles and the mechanisms by which they assemble, analysis of individual particles and their assembly in living cells offers the potential of surmounting many of the limitations inherent in other approaches. In this review, we discuss how the recent application of live-cell microscopic imaging techniques has increased our understanding of the process of HIV-1 particle assembly. In particular, we focus on recent studies that have employed total internal reflection fluorescence microscopy and other single-virion imaging techniques in live cells. These approaches have illuminated the dynamics of Gag protein assembly, viral RNA packaging and ESCRT (endosomal sorting complex required for transport) protein recruitment at the level of individual viral particles. Overall, the particular advantages of individual particle imaging in living cells have yielded findings that would have been difficult or impossible to obtain using macroscopic or fixed-cell microscopic techniques.

Novel imaging technologies in the study of HIV

The replication cycle of HIV proceeds within an infected cell and imaging techniques allow us to focus on the pathogen in this cellular environment. During recent years, both electron microscopy and fluorescence microscopy have evolved from methods providing two-dimensional still images to techniques that can resolve native, three-dimensional structures at resolutions down to approximately 20 Å, or allow direct real-time observation of dynamic intracellular events, respectively, thereby yielding numerous novel insights into HIV biology. Future technological developments are expected to narrow the gap between electron microscopy (high spatial and structural resolution, but no information about dynamics) and fluorescence microscopy (high temporal resolution and high throughput, but low spatial resolution), providing detailed views that will deepen our understanding of HIV–cell interactions.

Protein transduction from retroviral Gag precursors

Retroviral particles assemble a few thousand units of the Gag polyproteins. Proteolytic cleavage mediated by the retroviral protease forms the bioactive retroviral protein subunits before cell entry. We hypothesized that this process could be exploited for targeted, transient, and dose-controlled transduction of nonretroviral proteins into cultured cells. We demonstrate that gammaretroviral particles tolerate the incorporation of foreign protein at several positions of their Gag or Gag-Pol precursors. Receptor-mediated and thus potentially cell-specific uptake of engineered particles occurred within minutes after cell contact. Dose and kinetics of nonretroviral protein delivery were dependent upon the location within the polyprotein precursor. Proteins containing nuclear localization signals were incorporated into retroviral particles, and the proteins of interest were released from the precursor by the retroviral protease, recognizing engineered target sites. In contrast to integration-defective lentiviral vectors, protein transduction by retroviral polyprotein precursors was completely transient, as protein transducing retrovirus-like particles could be produced that did not transduce genes into target cells. Alternatively, bifunctional protein-delivering particle preparations were generated that maintained their ability to serve as vectors for retroviral transgenes. We show the potential of this approach for targeted genome engineering of induced pluripotent stem cells by delivering the site-specific DNA recombinase, Flp. Protein transduction of Flp after proteolytic release from the matrix position of Gag allowed excision of a lentivirally transduced cassette that concomitantly expresses the canonical reprogramming transcription factors (Oct4, Klf4, Sox2, c-Myc) and a fluorescent marker gene, thus generating induced pluripotent stem cells that are free of lentivirally transduced reprogramming genes.

Development of a rapid and convenient method for the quantification of HIV-1 budding

In cells, the expression of Gag protein, one of the major structural proteins of retroviruses, is sufficient for budding virus-like particles (VLPs) from the cell surface. We have previously reported that spheroplasts of Saccharomyces cerevisiae expressing HIV-1 Gag proteins from an episomal plasmid constitutively released a large amount of VLPs into culture media; however, commercially available ELISA kits which detect mature capsid of HIV-1 could not detect uncleaved 55-kDa Gag proteins released from budding yeast. We therefore developed a method to quantitate VLP levels released from budding yeast by using fusion protein from HIV-1 Gag and Firefly Luciferase. This system is useful for screening cellular factor(s) involved in retrovirus budding from S. cerevisiae.

HIV-1 Gag-RNA interaction occurs at a perinuclear/centrosomal site; analysis by confocal microscopy and FRET

The Gag polyprotein is the major structural protein of human immunodeficiency virus-1 (HIV-1) constituting the viral core. Between translation on cytoplasmic polysomes and assembly into viral particles at the plasma membrane, it specifically captures the RNA genome of the virus through binding RNA structural motifs (packaging signals -Psi) in the RNA. RNA is believed to be a structural facilitator of Gag assembly. Using a combined approach of immunofluorescence detection of Gag protein and in situ hybridisation detection of viral genomic RNA, we demonstrate that Gag protein colocalises early after expression with Psi+ RNA in the perinuclear region and also colocalises with centrioles. Colocalised RNA and protein subsequently traffic through the cytoplasm to the plasma membrane of the cell. Gag expressed from Psi- RNA diffuses throughout the cell. It is not found at centrioles and shows delayed cytoplasmic colocalisation with the RNA genome. RNA capture through Psi does not influence binding of Gag to microfilaments. Gag does not bind to tubulin during export. The presence of the packaging signal may coordinate capture of Psi+ RNA by Gag protein at the centrosome followed by their combined transport to the site of budding. HIV-1 Psi thus acts as a subcellular localisation signal as well as a high-affinity-binding site for Gag.

Construction and characterization of a fluorescently labeled infectious human immunodeficiency virus type 1 derivative

The introduction of a label which can be detected in living cells opens new possibilities for the direct analysis of dynamic processes in virus replication, such as the transport and assembly of structural proteins. Our aim was to generate a tool for the analysis of the trafficking of the main structural protein of human immunodeficiency virus type 1 (HIV-1), Gag, as well as for the analysis of virus-host cell interactions in an authentic setting. We describe here the construction and characterization of infectious HIV derivatives carrying a label within the Gag polyprotein. Based on our initial finding that a short epitope tag could be inserted near the C terminus of the matrix domain of Gag without affecting viral replication, we constructed HIV derivatives carrying the egfp gene at the analogous position, resulting in the expression of a Gag-EGFP fusion protein in the authentic viral context. Particles displaying normal viral protein compositions were released from transfected cells, and Gag-EGFP was efficiently processed by the viral protease, yielding the expected products. Furthermore, particles with mature morphology were observed by thin-section electron microscopy. The modified virus was even found to be infectious, albeit with reduced relative infectivity. By preparing mixed particles containing equimolar amounts of Gag-EGFP and Gag, we were able to obtain highly fluorescently labeled virion preparations which displayed normal morphology and full wild-type infectivity, demonstrating that the process of HIV particle assembly displays a remarkable flexibility. The fluorescent virus derivative is a useful tool for investigating the interaction of HIV with live cells.

HIV-1 egress is gated through late endosomal membranes

HIV-1 buds from the surface of activated T lymphocytes. In macrophages, however, newly formed HIV-1 particles amass in the lumen of an intracellular compartment. Here, we demonstrate by live-cell imaging techniques, by immunocytochemistry and by immuno-electron microscopy that HIV-1 structural proteins, particularly the internal structural protein Gag, accumulate at membranes of the late endocytic compartment in a variety of cell types and not just in monocyte/macrophage-derived cells. Recent biochemical and genetic studies have implicated components of the mammalian vacuolar protein sorting pathway in retroviral budding. Together with those observations, our study suggests that HIV-1 morphogenesis is thoroughly rooted in the endosomal system.

Human immunodeficiency virus type 1 Gag assembly through assembly intermediates

Human immunodeficiency virus Gag protein self-assembles into spherical particles, and recent reports suggest the formation of assembly intermediates during the process. To understand the nature of such assembly intermediates along with the mechanism of Gag assembly, we employed expression in Escherichia coli and an in vitro assembly reaction. When E. coli expression was performed at 37 degrees C, Gag predominantly assembled to a high order of multimer, apparently equivalent to the virus-like particles obtained following Gag expression in eukaryotic cells, through the formation of low orders of multimer characterized with a discreet sedimentation value of 60 S. Electron microscopy confirmed the presence of spherical particles in the E. coli cells. In contrast, expression at 30 degrees C resulted in the production of only the 60 S form of Gag multimer, and crescent-shaped structures or small patches with double electron-dense layers were accumulated, but no complete particles. In vitro assembly reactions using purified Gag protein, when performed at 37 degrees C, also produced the high order of Gag multimers with some 60 S multimers, whereas the 30 degrees C reaction produced only the 60 S multimers. However, when the 60 S multimers were cross-linked so as not to allow conformational changes, in vitro assembly reactions at 37 degrees C did not produce any higher order of multimers. ATP depletion did not halt Gag assembly in the E. coli cells, and the addition of GroEL-GroES to in vitro reactions did not facilitate Gag assembly, indicating that conformational changes rather than protein refolding by chaperonins, induced at 37 degrees C, were solely responsible for the Gag assembly observed here. We suggest that Gag assembles to a capsid through the formation of the 60 S multimer, possibly a key intermediate of the assembly process, accompanied with conformational changes in Gag.

The molecular basis of HIV capsid assembly--five years of progress

The assembly of HIV is relatively poorly investigated when compared with the process of virus entry. Yet a detailed understanding of the mechanism of assembly is fundamental to our knowledge of the complete life cycle of this virus and also has the potential to inform the development of new antiviral strategies. The repeated multiple interaction of the basic structural unit, Gag, might first appear to be little more than concentration dependent self-assembly but the precise mechanisms emerging for HIV are far from simple. Gag interacts not only with itself but also with host cell lipids and proteins in an ordered and stepwise manner. It binds both the genomic RNA and the virus envelope protein and must do this at an appropriate time and place within the infected cell. The assembled virus particle must successfully release from the cell surface and, whilst being robust enough for transmission between hosts, must nonetheless be primed for rapid disassembly when infection occurs. Our current understanding of these processes and the domains of Gag involved at each stage is the subject of this review.

HIV type 1 Gag virus-like particle budding from spheroplasts of Saccharomyces cerevisiae

Expression of retroviral Gag protein in yeast has previously shown Gag targeting to the plasma membrane but little or no production of Gag virus-like particles (VLPs). Here we show that, after removal of the cell wall, the expression of HIV type 1 Gag protein in Saccharomyces cerevisiae spheroplasts allowed simultaneous budding of VLPs from the plasma membrane. Our data show that (i) the VLPs released from yeast spheroplasts were spherical and had morphological features, such as membrane apposed electron-dense layers, characteristic of the immature form of HIV particles; (ii) the VLPs were completely enclosed in the plasma membrane derived from yeast, which is denser than that of higher eukaryotic cells; (iii) the VLP Gag shells remained intact after treatment of nonionic detergent; and (iv) the VLPs were released soon after removal of the cell wall and accumulated up to 300 microg/liter of culture. Our results also show that VLP production was abolished by amino acid substitution of the Gag N-terminal myristoylglycine and impaired when Gag C-terminal deletions were extended beyond the nucleocapsid domain. These results were consistent with those obtained previously in higher eukaryotic expression systems, suggesting that similar Gag domains were used for VLP assembly. We suggest that the system described here offers significant advantages for studying host factors required for VLP budding. The system also may be available for production of vector virus-free VLPs for practical applications such as vaccine development.

Non-polar distribution of green fluorescent protein on the surface of Autographa californica nucleopolyhedrovirus using a heterologous membrane anchor

Heterogeneous proteins can be displayed on the surface of the budded form of Autographa californica nucleopolyhedrovirus (AcMNPV) after fusion of the display protein to the AcMNPV major envelope glycoprotein, gp64. However, display is restricted to the poles of the virion and is relatively low level. To investigate the use of alternative membrane anchor sequences that would be compatible with virus surface display, we have constructed a display vector containing the gp64 signal peptide and a membrane anchor from the vesicular stomatitis virus (VSV) G glycoprotein. Introduction of a gene encoding green fluorescent protein (GFP) between these signals led to abundant display of GFP on the surface of insect cells and on recombinant budded virions. In addition, and in contrast to gp64 based fusion proteins, GFP was localized to the lateral virion surfaces.

Role of tyrosine phosphorylation in ligand-independent sequestration of CXCR4 in human primary monocytes-macrophages

The chemokine stromal cell-derived factor (SDF)-1 and its receptor, CXCR4, play important roles in human immunodeficiency virus type 1 (HIV-1) pathophysiology, leukocyte trafficking, inflammation, hematopoiesis, embryogenesis, angiogenesis, and cancer metastasis. The effects of cytokines on the regulation of CXCR4 function were investigated in human primary monocytes-macrophages. The expression of functional CXCR4 on the cell surface was demonstrated by the detection of ligand-induced Ca(2+) mobilization, chemotaxis, and ligand-induced receptor endocytosis. Surface CXCR4 expression was down-regulated by cytokines interleukin-4 (IL-4), IL-13, and granulocyte-macrophage colony-stimulating factor (GM-CSF) and up-regulated by IL-10 and transforming growth factor-beta 1. Down-regulation was mediated post-translationally, in the absence of protein degradation, through an endocytotic mechanism. In contrast to SDF-1 alpha-induced CXCR4 endocytosis, cytokine-induced endocytosis of this receptor was independent of actin filament polymerization. GM-CSF increased the expression of G protein-coupled receptor kinase 3 (GRK3), beta-arrestin-1, Pyk2, and focal adhesion kinase (FAK). Cytokine treatment also increased the total and tyrosine-specific phosphorylation of CXCR4 as well as the phosphorylation of FAK on tyrosine 397. It also induced the formation of GRK3.CXCR4 or FAK.CXCR4 complexes. Infection of macrophages by primary R5X4 and X4 isolates of HIV-1 was inhibited by IL-4, IL-13, and GM-CSF, an effect that was associated with down-regulation of surface CXCR4 expression. These data indicate that ligand-dependent and ligand-independent endocytoses of CXCR4 are mediated by different mechanisms. Cytokine-induced endocytosis of chemokine receptors may be of therapeutic value in HIV-1 infection, inflammation, tumor metastasis, and defective hematopoiesis.

Tracking the assembly pathway of human immunodeficiency virus type 1 Gag deletion mutants by immunogold labeling

The Pr55gag gene product of human immunodeficiency virus type 1 (HIV-1) is sufficient to direct the formation of retrovirus-like particles (RVLPs). Recent biochemical evidence has indicated the presence of Gag intermediates in the cytoplasm; however, the Gag assembly process into RVLPs remains incompletely defined. The authors present here the subcellular localization of Gag mutant proteins in BSC40 and Jurkat cells by immunoelectron microscopy (IEM). The full Gag/Pol and Gag precursors, a C-terminal deletion mutant lacking a portion of nucleocapsid (NC), and all p6Gag gave rise to similar levels of RVLPs at the cell surface. A C-terminal deletion of all NC and p6Gag abrogated particle formation, whereas p24 was found in patches at the cell surface. Deletion of matrix (MA) sequences from Gag resulted in intracellular particles, and myristylation was not required for particle formation in the context of the MA deletion. Matrix expression was enhanced with Gag/Pol or Env coexpression as determined by semiquantitative IEM. p24 protein was targeted at vacuolar and mitochondrial membranes, but not at Golgi cisternae. In addition, aggregations of Gag intermediates and RVLPs in the cytoplasm, rough endoplasmic reticulum, cisternae, and mitochondria were noted. These results provide defined in situ evidence that HIV-1 particle assembly occurs in the cytosol in addition to budding at most intracellular membranes.

Intracellular trafficking of retroviral genomes during the early phase of infection: viral exploitation of cellular pathways

Retroviruses enter cells through specific cell-surface receptors and then embark on a journey that ultimately leads to the establishment of the integrated proviral DNA. The steps of the journey include the reverse transcription of the viral RNA into DNA, the trafficking of the viral protein-DNA complex through the cytoplasm, the entry of the complex into the nucleus, and the insertion of the linear viral DNA into the host genome. All these steps are likely to involve specific interactions of viral proteins with host machinery. Our knowledge of the details of these interactions is very limited but is rapidly expanding, and should provide a deeper understanding of the pathways and components used by the different classes of retroviruses. This knowledge in turn should enable the development of better and more efficient retroviral vectors for use in gene therapy protocols in vivo.

HIV type 1 Gag and nucleocapsid proteins: cytoskeletal localization and effects on cell motility

Cell motility is likely to play a pivotal role in HIV infection by promoting the dissemination of infected cells. On the basis of observations indicating an interaction between HIV-1 Gag and target cell filamentous actin, we hypothesized that these interactions would promote cell motility of HIV-infected cells. Indeed, we have found that HIV-1 infection enhances the chemotactic response of macrophages. To specifically investigate the significance of the interactions between Gag and cellular actin, we transfected NIH 3T3 fibroblasts and HeLa cells with a construct that permits the expression of HIV-1 Gag in the absence of any other viral protein. Fractionation experiments showed that Gag was present in cytoskeletal fraction containing long actin filaments and in a high-speed postcytoskeletal fraction with short actin filaments. We have also localized HIV-1 Gag to the lamellipodia of chemoattractant-stimulated cells. Significantly, the motility of Gag-expressing cells was enhanced in chemotaxis assays. In vitro mutagenesis experiments showed that HIV-1 Gag binds filamentous actin through the nucleocapsid domain (NC). An NC-green fluorescent protein fusion had the same cellular distribution as the complete protein, and its expression increased cell motility. These data suggest that interactions between HIV-1 Gag and actin in infected cells enhance cell motility. Ultimately this enhanced motility of infected cells could promote the dissemination of virus into the brain and other tissues.

Membrane relocation but not tight binding of human immunodeficiency virus type 1 Gag particles myristoylated in Escherichia coli

Expression of human immunodeficiency virus Gag protein and the N-terminal matrix (MA) domain in Escherichia coli yielded spherical structures in the cytoplasm. When human N-myristoyltransferase was coexpressed, both Gag and MA were fully myristoylated and spherical structures were relocated in close proximity to the cytoplasmic membrane. However, neither myristoylated Gag nor MA exhibited tight binding to E. coli membrane, suggesting that myristoylation in E. coli did not confer membrane affinity on Gag despite the relocation. Our data also suggest that the morphogenetic pathway of Gag particles in prokaryotic cells differs from that in eukaryotic cells despite biochemical similarities of in the form of Gag expressed.

Palmitoylation of the HIV-1 envelope glycoprotein is critical for viral infectivity

Recent studies suggest that HIV-1 budding occurs selectively from detergent-insoluble membrane domains, referred to as lipid rafts. Palmitoylation is thought to be one of the factors responsible for targeting membrane proteins to lipid rafts. The cytoplasmic domain of the HIV-1 envelope glycoprotein (gp160) contains two palmitoylated cysteine residues. In this work, we studied the solubility of gp160 after detergent extraction. We show that wild-type gp160 is mostly insoluble after ice-cold Triton X-100 extraction, but that it becomes almost completely soluble at 37 degrees C. In contrast, we find that a mutant gp160, in which the two palmitoylated cysteine residues are replaced by serine, is Triton X-100 soluble even under ice-cold extraction. These findings are consistent with the properties of proteins that localize to lipid rafts and strongly suggest that gp160 is associated with lipid rafts. Further, removal of both palmitoylation sites results in the formation of virus with low levels of gp160 incorporation as well as a decrease in viral infectivity by 60-fold. Our results strongly support the suggestion that HIV-1 buds from lipid rafts and point to a role for rafts as a viral assembly hub.

Crosslink analysis of N-terminal, C-terminal, and N/B determining regions of the Moloney murine leukemia virus capsid protein

To analyze contacts made by Moloney murine leukemia virus (M-MuLV) capsid (CA) proteins in immature and mature virus particles, we have employed a cysteine-specific crosslinking approach that permits the identification of retroviral Gag protein interactions at particular residues. For analysis, single cysteine creation mutations were made in the context of protease-deficient or protease-competent parental constructs. Cysteine creation mutations were chosen near the N- and C-termini of CA and at a site adjacent to the M-MuLV Glu-Ala Fv1 N/B host range determination sequence. Analysis of immature virions showed that PrGag proteins were crosslinked at C-terminal CA residues to form dimers while crosslinking of particle-associated N-terminal and N/B region mutant proteins did not yield dimers, but showed evidence of linking to an unknown 140- to 160-kDa partner. Analysis of mature virions demonstrated that both N- and C-terminal CA residues participated in dimer formation, suggesting that processed CA N- and C-termini are free to establish interprotein associations. Interestingly, N/B region mutant residues in mature virus particles did not crosslink to form dimers, but showed a novel crosslinked band, consistent with an interaction between the N/B tropism determining region and a cellular protein of 45-55 kDa.

Actin-binding cellular proteins inside human immunodeficiency virus type 1

Host proteins are incorporated both on and inside human immunodeficiency virus type 1 (HIV-1) virions. To identify cellular proteins inside HIV-1, virion preparations were treated by a protease-digestion technique that removes external host proteins, allowing for the study of the proteins inside the virus. Treated HIV-1 preparations were analyzed by immunoblot, high-pressure liquid chromatography, and protein sequence analyses. These analyses identified several cellular proteins inside HIV-1: elongation factor 1alpha, glyceraldehyde-3-phosphate dehydrogenase, HS-1, phosphatidylethanolamine-binding protein, Pin1, Lck, Nm23-H1, and the C-terminal tail of CD43. Several of these proteins were found as fragments of their full-sized proteins that appear to be generated by our protease treatment of the virions, the HIV-1 protease, or a cellular protease. Recent advances in cell biology and biochemistry have identified some of these proteins as actin-binding proteins. These results support the hypothesis that actin filaments are incorporated into the virion and may provide additional clues for the understanding of the interaction between viral and cellular proteins during assembly and budding.

Roles of matrix, p2, and N-terminal myristoylation in human immunodeficiency virus type 1 Gag assembly

Human immunodeficiency virus type 1 Gag protein is cotranslationally myristoylated at the N terminus and targeted to the plasma membrane, where virus particle assembly occurs. Particle assembly requires the ordered multimerization of Gag proteins, yet there is little direct evidence of intermediates of the reaction or of the domains that lead to each stage of the oligomerization process. In this study, following the expression in insect cells of C-terminally truncated Gag proteins and their purification, both the multimeric nature of each Gag protein and the ability to form Gag virus-like particles (VLP) were analyzed. Our results show that (i) the matrix (MA) domain forms a trimer and contributes to a similar level of oligomerization of the assembly-competent Gag; (ii) the p2 domain, located at the capsid/nucleocapsid junction, is essential for a higher order of multimerization (>1,000 kDa); (iii) the latter multimerization is accompanied by a change in Gag assembly morphology from tubes to spheres and results in VLP production; and (iv) N-terminal myristoylation is not required for either of the multimerization stages but plays a key role in conversion of these multimers to Gag VLP. We suggest that the Gag trimer and the > 1,000-kDa multimer are intermediates in the assembly reaction and form before Gag targeting to the plasma membrane. Our data identify a minimum of three stages for VLP development and suggest that each stage involves a separate domain, MA, p2, or N-terminal myristoylation, each of which contributes to HIV particle assembly.

Localization of actin in Moloney murine leukemia virus by immunoelectron microscopy

Immunoelectron microscopy was used to detect actin in wild-type (wt) Moloney murine leukemia virus (MoMuLV) and in virus-like particles (VLP) produced by recombinant Semliki Forest virus expressing only the MoMuLV gag polyprotein. Gold immunolabeling revealed the presence of actin on the surface of delipidized VLP and delipidized wt virus particles. Statistical evaluation of the number of colloidal gold particles per VLP revealed a large range of values and a prevalence of VLP with small numbers of gold particles. Labeling for actin was lost after prolonged treatment of VLP with 1% Nonidet-P40, high-pH buffer, or gelsolin. Gold immunolabeling with antibodies to gag proteins p15 (MA) and p12 and p30 (CA) was abundant and was not affected by treatment of VLP or wt virus with 1% Nonidet or gelsolin. VLP treated with a mixture of detergent and aldehyde fixatives showed more uniform and consistent labeling for actin than without fixatives. Negative staining or heavy metal shadowing revealed a globular surface of delipidized VLP. Stereomicrographs of gold-immunolabeled VLP showed that p15gag and p12gag were associated with the globular projections. Delipidized VLP were also well labeled with antibody to p30gag, which indicated that the gag shell permitted access of antibodies to p30gag and was therefore not a closely packed structure. Labeling for actin-binding proteins moesin and ezrin was negative in both the wt virus and the VLP. The absence of Gaussian distribution of actin in the sample of VLP suggests that actin is not a structural protein and its presence in MuLV virus particles may be fortuitous. This, however, does not rule out any possible role of actin in transport, assembly, budding, or release of virus particles, events which take place in the cytoplasm or at the plasma membrane. The site of actin in VLP is discussed in relation to the present knowledge of the molecular organization of the MuLV gag shell.